|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by manual means in over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) includinggetting out the excavated soil and disposal of surplus excavated earth, lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 3 | Earth wok in excavation in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms lift up to 1.5m ,including getting out the excavated soil and disposal of surplus excavated soil All Kind of soil |
| 4 | Filling available excavated earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exeeding 20 cm in depth, consolicating each deposited layer by ramming and watering, lead up to 50 m an lift up to 1.50 m |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 6 | Providing and laying in cement concrete ofspecified grade excluding the cost of centring and shuttering .All work upto plinth level 1:5:10 cement concerete (1cement:5 Coarse sand: 8 stone agg. 10 mm size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforecement - all work up to plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 10 | Centring and shuttering including strutting, propping etc, and removal of form for, removal of form for, columns, Pillars, Piers, Abutrnents, Posts and Struts . |
| 11 | Centering & shuttering including strutting, propping etc. and removal of form work for shelves |
| 12 | Centring and shuttering including strutting, propping etc, and removal of form for, removal of form for foundations, footings, bases of columns, beams, coloumn etc. mass concrete. |
| 13 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1 Cement:6coarse sand:12 graded sone aggregate 20 mm no minal size )at plinth level with :cement mortar 1:6 (1 cement:6 coarse sand) |
| 14 | Random rubble masonry with hard stone in super structure and above plinth level and upto flor five level,including levelling up with cement concrete 1:6:12(1 Cement:6coarse sand:12 graded sone aggregate 20 mm no minal size )at window sills, ceiling level and the like with :cement mortar 1:6 (1 cement:6 coarse sand) |
| 15 | Random Rubble dry masonry with hard stone in foundation and plinthat plinth level |
| 16 | Providing and fixing up to floor five level precast cement concrete solid block in 1:2:4, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete |
| 17 | Providing wood work in frames ofdoors, window, clerestory windows and other frames, wrought, framed and fixe in position, Local pine wood/Local wood .. |
| 18 | Providing wood work in frames of false ceiling portition etc. sawn and put up in position Local pine wood/Local wood . |
| 19 | Providingand fixing wooden moulded beading to ceiling with iron screws plugs and priming coat on unexposed surface etc completewith Local pine wood/Local wood . wood 35x10 mm |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Local pine wood/Local wood .35 mm thick shutters |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Local pine wood/Local wood . . |
| 22 | Providing and fixingshutters forwindows using 2.5 mm thick plain acrylic sheet as glazing including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Local pine wood/Local wood . |
| 23 | Providing and fixingfly proof galvanised M.S. wire gauge shutters for doors, windows and clerestory windows usingwire gauge withaverage width of apetre 1.4 mm in both directions with necessary screws including black enamelled ISI marked M.S butt hinges with necessary screws. Local pine wood/Local wood .35 mm thick |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 25 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete |
| 26 | 25 mm thick planking, tounged and grooved in flooring including fixing with iron screws complete with : Local pine wood/Local wood . |
| 27 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick |
| 28 | Providing and fixing inside wall lining with 20 mm thick wooden palnking tongued and grooved with necessary fixing arrangement and screws etc. complete : 20 mm thick Local pine wood/Local wood . / local pine wood planks |
| 29 | Providing and fixingLocal pine wood/Local wood . / local 20 mm thick planking, tongued and grooved in flase feiling with necessary nails etc complete(frame work to be paid separately) |
| 30 | Providing and fixing glass strips in joints of cement concrete floors 40 mm wide and 4 mm thick |
| 31 | Cement concrete flooring 1:2:4 (1cement 2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc.Complete 40 mm thick with 20 mm nominal size stone aggregate |
| 32 | Providing and laying viniyl flooring 0.80 mm thick of approved shade to be fixed with adhesive of approved qly. : 80 mm thick |
| 33 | 20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand) |
| 34 | 12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand) |
| 35 | Structural steel work reveted, bolted or welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 36 | Providing and fixing bolts including nuts and washers complete. |
| 37 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 38 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm |
| 39 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm |
| 40 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm |
| 41 | Distempering with 1st class acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approvedmanufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 42 | Applying priming coat :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 43 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work. |
| 44 | Paintingwith synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work |
| 45 | White washing with lime to give an even shade: New work (three or more coats) |
| 46 | Finishing wall with water proofing cement paint of required shade: New work (Two or more coats @ 3.84 Kg/10 sqm) |
| 47 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required |
| 48 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, Jet pressure device, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid. |
| 49 | Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge. |
| 50 | Providing and fixing wash basin with C.I. /M.S. brackets, 15 mm C.P. brass pillar taps,Kingston/Gem/Techno/ Parko,32 mm C.P. brass waste of standard pattern,includingpainting of fittings and brackets, cutting and making good the walls wherever require :A]White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. |
| 51 | Providing and fixingwhite vitreous China pedestal for wash basin compeletly recessed at the back for the reception of pipes and fittings. |
| 52 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 without C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl 200 mm bowl depth . |
| 53 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 600x450 mm |
| 54 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 55 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 56 | Providing, laying and jointing PVC (Heavy) pipes 100 mm dia nominal bore with solvent including testing of joints etc. complete including all necessary fittings. |
| 57 | Providing and laying PVC multilayer composite pipe black colour 40 mm internal and 50 mm external dia (Jindal make) for external use suitable for extreme cold climate including necessary jointing materails/nipple for connecting pipes, trenching refilling and testing of joints etc complete as per direction of Engineer in charge. |
| 58 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (internal work, exposed on wall) and painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality. : 15 mm dia nominal bore |
| 59 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: 20 mm dia nominal bore |
| 60 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 61 | Providing and fixing CP brass stop cock 15 mm dia ( concealed) of make Parko/Kingstone/Essco confirming to IS:8931. |
| 62 | Providing and fixing 15 mm nominal bore, 90 mm long (weighing not less than 93 gms) PTMT bib cock of approved quality and colours. |
| 63 | Providing and fixing 15 mm nominal bore, 86 mm long (weighing not less than 88 gms) PTMT stop cock of approved quality and colours. |
| 64 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 65 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. |
| 66 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire |
| 67 | Wiring for light point/fan point/ exhaust point/ call ball point with 1.5 sq. mm FR PVC insulated copper conducter single core cable in surface/ recessed 20 mm PVC conduit (Polymer/Polyfit/Anchor/ISI), with piano type switch (Anchor/CONA), phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 Sqmm FR PVC insulated copper conducter single core cable (Plaza/Havell\"s/Anchor) etc as required.Group A |
| 68 | Wiring for circuit/sub main wiringalong with earth wire with 2x1.5 sq mm + 1x1.5 sq mm earth wire FR PVC insulated copper conducter, single core cable in surface/ recessed 20 mm PVC conduit (Polymer/Polyfit/Anchor/ISI)as required. Wire should be of Plaza/Havell\"s/Anchor) |
| 69 | Wiring for circuit/sub main wiringalong with earth wire with 2x10 sq mm + 1x10 sq mm earth wire FR PVC insulated copper conducter, single core cable in surface/ recessed PVC conduit (Polymer/Polyfit/Anchor/ISI) as required. Wire should be of Plaza/Havell\"s/Anchor) |
| 70 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, incuding P/F 6 pin 5/6 amps piano type socket outlet and 15/16 amps piano type switch, connections etc as required |
| 71 | Supplying and fixing PVC angle/Batten holder with LED bulb 9 watt including connectionsetc. as required. |
| 72 | Supplying and fixing MCB DB 6 ways (Havell\"s) complete with connections, testing and commissioning etc as required. |
| 73 | Supplying and fixing double Pole 40 Amp, 240 volts, isolator (Havells) in the existing MCB DB complete with connections, testing and commissioning etc as required. |
| 74 | Supplying and fixing 16 Amp rating, 240/415 volts (Havells), \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Single pole |
| 75 | Supplying and fixing 18 watt LED batten fitting (Havell\"s/Philips/Bajaj) complete |
