Health And Family Welfare Department has published Tender For Construction Of 50 Bedded Critical Care Block At District Hospital Thoubal,Manipur.. Submission Date for this Tender is 16-02-2024. Building Work Tenders in Imphal West Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | BUILDING |
| 2 | Earthwork in excavation by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) i/cgetting out and disposed of excavated earth, lead upto 50m and lift upto 1.5m, as directed by the Engineer-in-charge. |
| 3 | All kinds of soil. |
| 4 | Filling available excavated earth (excluding Rock) in trenches, plinth, sided of foundation etc. In layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead up to 50mm and lift up to 1.5m.. |
| 5 | Supplying and filling in plinth with sandy soil under floors including watering, ramming, consolidating & dressing complete. |
| 6 | Boulder with minimum size of 300mm for pitching at site. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 8 | a) 1:3:6 ( 1 cement : 3 coarse sand : 6 gradded stone aggregate 40mm nominal size.) |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 10 | b) 1:2:4 ( 1 cement : 2 coarse sand : 4 gradded stone aggregate 40mm nominal size.) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level |
| 12 | a) 1:1.5:3 ( 1 cement : 1 coarse sand : 2 gradded stone aggregate 20mm nominal size.) |
| 13 | R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas,lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor fivelevel excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 15 | a ) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ). |
| 16 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Above Plinth Level. |
| 17 | a ) Thermo- mechanically treated bars. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 19 | Foundations, footings, bases of columns, etc. for mass concrete |
| 20 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | Columns, pillars, piers, abutments, posts and struts. |
| 22 | Suspended floors, roofs, landings, balconies and access platform |
| 23 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 24 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 25 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 26 | Cement mortar 1:3 (1cement:3coarse sand) |
| 27 | Providing and fixing glazing in aluminium door, window. ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-chargo . (Cost of aluminium snap beading shall be paid in basic item): |
| 28 | With float glass panes of 4.0 mm thickness |
| 29 | Providing and laying Polished Granite stone flooring in required design and paterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and pointing with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. |
| 30 | Polished Granite stone slab Jet Black, cherry Red, Elite Brown, Cat Eye or equivalent. |
| 31 | Kota stone slabs 25mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick mortar 1:3 (1cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 32 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 33 | Providing and fixing false ceiling at all height including providing and fixing of frames work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm ( both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x25x0.55 mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.I channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having cleats of 10.5 mm at 450 mm centre to centre, shall befixed in a direction perpendicular to G.I intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I wire at every junction , including fixing perimeter channels 0.5mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre , with 25 mm long drive - all screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers cocering up to 150 mm on both sides of joint and two coats of primer suitable for both , all as per manufacture"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeters channels suitably fixed, all complete as per drawings and specification an ddirection of the Engineer in charge but excluding the cost of paintingwith : |
| 34 | 12.5mm thick tappered edge gypsum plain board conforming to IS:2095-Part 1 |
| 35 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : |
| 36 | 1:3 (1 cement: 3 fine sand) |
| 37 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement |
| 38 | 12 mm cement plaster |
| 39 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plasterod wall surface to prepare the surface even and smooth complete. |
| 40 | Distempering with dry distemper of approved brand and manufactured two or more coatsand of required shape on new workover and i/c priming coat of whiting to give an even shade. |
| 41 | Finishing walls with Delux Multi surface paint system for interior and exterior using Primer as per manufacturers specification. |
| 42 | Two or more coats applied @1.25 ltr/10sqm. Over and i/c one coat of special primer applied @0.75 ltr/10sqm |
| 43 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even. |
| 44 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 45 | WATER SUPPLY AND SANITARY INSTALLATION |
| 46 | Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottom lift upto 1.5 including getting out the excavation soil and disposed of surplus excavated soil as directed within a lead of 50mm. |
| 47 | (a) Hard / Dense soil |
| 48 | Filling available excavated earth (excluding Rock) in trenches, plinth, sided of foundation etc. In layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead up to 50mm and lift up to 1.5m. |
| 49 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and footing shuttering. |
| 50 | (a) 1:4:8 (1cement : 4 C/sand : 8 graded stone aggregate 40mm nominal size ). |
| 51 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 52 | Reinforced cement concrete work in beams, suspended floors, roofs having siop up to 15 degree, landing, shelves and their supports balconies, lintels, beams, plinth beams, girders, bressumers and cantileversupto floors two level excluding the cost of centering, shuttering, finishing and reinforcement in (a) 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 53 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement :1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 54 | Reinforcement for RCC worksi/c. bending and placing in position( a )Thermo- mechanically treated bar. |
| 55 | Providing from work i/c centering and shuttering so as to give a rough finish, strutting and propping and centering below supporting floor to ceiling not exceeding 4m. And removal of the same for in-situ reinforced concrete and plain concrete work in, |
| 56 | Foundation, footing, bases of column etc and mass concrete. |
| 57 | (a) Flat surface such as suspended floor, roofs landing and the like - floors etc above 200 m m in thickness. |
| 58 | walls any thicknessincluding attached pilaster butresses plinth and stringer courses |
| 59 | Brick work with 1ST class burnt clay F.P.S(non modular) bricks in foundation & plinth in cement mortar 1 : 4 (1cement :4 coarse sand). |
| 60 | Providing and fixing water closet squatting pan ( European type)with with seat and lid, 10 litre low level white vitreouschina flushing cistern & CP withflush fittings& CI brackets 40 mm flush bend over flow arrangementwith specials of standard make and mosquito proofing coupling of approved municipal design complete including painiting of fittingsand bracket cutting and making good the wallsand floors wherever required. |
| 61 | Providing and fixing wash basin with C.I brackets, 15 mm C.P brass singleholebasin mixer of approved quality and mamke including paintingof fittings and brackets cutting and making goodthe walls wherever required white vitreous china wash basin 630x 450 mm with a pair of 15 mm CP brass pillar traps |
| 62 | Providing and fixing 600 X 450 mm beveled edge mirror of superior glass ( of approved quality ) and of reqcomplete with 6 mm thick hard board ground fixed to wooden cleatswith CP brass Screws and washer complete |
| 63 | Providing and fixingPVC waste pipe for sink or wash basin including PVC waste fitting complete. |
| 64 | Providingand fixing PTMTwaste couplingfor wash basinand sinkof approved quality and colour. |
| 65 | Providingand fixing PTMTtowel rail complete with brackets fixed to wooden cleats wih CP brass screws with concealed fitting arragementof approvedquality and colour |
| 66 | Providing and fixing GI inlet connection for flush pipe connecting with Wcpan |
| 67 | Providing and fixing CPbrass bip cockof approved qualiy conforming to IS:8931 |
| 68 | Providing and f ixingchlorinated polyvinly chloloride CPVC pipeshaving thermal stability for hot and coldwater supplyicludign all CPVCplain and brass threadedfittings includingfixing the pipe withclamps and 1 m spacingthis includes joining of pipes& fittingswith one step CPVCsolvent cement and testing of joints completeas per the direction of the engineer in charge |
| 69 | 25 mm nominal outerdia pipes inner |
| 70 | 25 mm nominal outerdia pipes outer |
| 71 | Providing GI pipescomplete with GI fititngs and clamps i/ccuttingand making goog the walls internal work |
| 72 | Providing GI pipescomplete with GI fititngs and clamps i/ccuttingand making good the walls external work |
| 73 | Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee including cuttingn and threading the pipe etc complete. |
| 74 | Providing and placing on terrace at all floor level spolythenewater storage tank IS : 12701 marked with coverand suitable locking arrangementandmaing necessaryholes of inlet , outlet and overflow pipe but without fittingsand the base support for the tank |
| 75 | Providingand fixing CP brass stop cock of approvedquality conforming to IS standardconforming to IS 8931 |
| 76 | Providingand fixing PTMT extension nipple for water tank pipe fittings of approved quality and colour.25 mm nominal boreweighingnot less than 62 gms |
| 77 | Providingand fixing unplasticised PVC connectionpipe with PTMT nuts collars and brush of approved quality and colour.15 mm nominal borre with 45 cm length |
| 78 | Providingand fixing ball valve brass of approves quality of high or low pressure with plastic floats 25 mm nominal bore |
| 79 | Providing and laying s n s centrifugal iron class k7 pipes |
| 80 | 150 mm dia ductile |
| 81 | 100 mm dia ductile |
| 82 | Providing push on joints to centrifugal spun cast iron pipes ductile iron pipes includingtesting |
| 83 | 150 mm dia ductile |
| 84 | 100 mm dia ductile |
| 85 | PROVIDINGINTERNAL ELECTRIFICATIONINSTALLATION |
| 86 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 87 | Group A |
| 88 | Group B |
| 89 | Group C |
| 90 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required |
| 91 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 92 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 93 | 2 X 10 sq. mm + 1 X 10 sq. mm earth wire |
| 94 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 95 | 5/6 A switch |
| 96 | 3 pin 5/6 A socket outlet |
| 97 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 98 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.. |
| 99 | 1 or 2 Module (75 mmX75 mm) |
| 100 | 6 Module (200mm x 75mm) |
| 101 | 8 Module (125 mmX125 mm) |
| 102 | Providing and fixing (following capacity TP&N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drillings holes in the cubicle panel board, making connection as reqd. |
| 103 | 200 amp. TP&N |
| 104 | P/F 200 amp TPN stand ground on load change over switch ( Compact design ) 415/500 V including connection etc. as reqd |
| 105 | Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 106 | 100 A, 10 kA |
| 107 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 108 | 12 way, Double door |
| 109 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "B" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 110 | Single pole |
| 111 | Isolaor DB pole 63amp |
| 112 | Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd |
| 113 | 63 amps 4 pole RCCB 100mA/300mA |
| 114 | Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd. |
| 115 | Extra for using salt and charcoal for GI or copper plate earth electroe as reqd. |
| 116 | Supplying,Fixing Recess Mounting LED down lighter BGSL 0301WH,220225 cast aluminium hosing fixed with collimated lens,white LED mounted on MCPCBall accessories including connection etc. as required(havell,s /Bajaja/Phillips/Cromton). |
| 117 | 3x1W watt LED Lamp. |
| 118 | S/F 48"" sweep (1200mm) A.C. ceiling fan complete with down rod canopy, 3 (three) blades but without regulator etc as reqd. (Make-Bajaj/Usha/ or similar) |
| 119 | S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd. |
| 120 | S/F 2 ton capacity split type Air conditiner (Diamond,3 star 5G 30, G-SC24 FD 3 WJH) complete without voltage stabilizer. |
| 121 | S/F Indo voltage corrector Automatic/ Stabilizer 5KVA (140-280 V) for Air conditioner (2ton) |
| 122 | S/F 25amp Air-Conditioner power plug point i/c 4 modular metal box on surface or in resses 4-modular plate and cover in fornt 25 amp pulg i/c connectionetc. as reqd. |
| 123 | FIRE ALARM SYSTEM |
| 124 | Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. |
| 125 | Supplying, installation, testing & commissioning of smoke detector with builtin LED andmountingbasecomplete with all connections etc. as required |
| 126 | Supplying, installation, testing & commissioning of manual callboxes of MS construction in surface/recess with stainless steelchain & hammer assembly complete with glass and push buttonetc. as required |
| 127 | Supplying and drawing of cable Fire Retardant PVC insulatedcopper conductor cable in the existing surface / recessedsteel conduit of following pairs, cores and size includingconnections and interconnections etc. as required |
| 128 | speaker cable Single pair, 2-core, 1.5 sqm |
| 129 | speaker cable Two pair, 2-core, 1.5 sqmm |
| 130 | speaker cable Four pair, 2-core, 1.5 sqm |
| 131 | Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. |
| 132 | 6 Zone |
| 133 | POWER WIRING AND PLUG |
| 134 | 1 or 2 Module (75 mmX75 mm) |
| 135 | 15/16 A switch |
| 136 | 6 pin 15/16 A socket outlet |
| 137 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 138 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 139 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 140 | LIFT |
| 141 | Providing and installing of SS 10 Passenger Lift(680 KGS) Machine. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
