Tamil Nadu Medical Services Corporation Limited has published Tender For Construction Of Radiotherapy Bunker In Govt. Medical College Hospital At Nagercoil, Kanyakumari Dt.. Submission Date for this Tender is 09-02-2024. Bunker Tenders in nagercoil Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Feb-2024 | Due date extension | Date | 09-02-2024 |
| Sl. No. | Item Description |
| 1 | Clearing Heavy Jungle |
| 2 | Earth work excavation (narrow) for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 3 | 0 to 2 m depth |
| 4 | 2 to 3 m depth |
| 5 | Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification. |
| 6 | ReFilling the basement with excavated earth free from clay in layers of not more than 15cm thick well rammed watered and consolidated complete complying with standard specification. |
| 7 | Supplying and filling the basement with well gravel free from clay in layers not more than 15cm thick well rammed watered and consolidated complete complying with standard specification. |
| 8 | Supplying and filling the basement with Stone dust (Quarry dust) in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 9 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 10 | Cement concrete 1:3:6(one cement, three sand, six aggregate) using 20mm gauge handbroken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cmthick and compacted,etc., complete complying with standard specfication. |
| 11 | Cement Concrete 1:3:6 (One Cement, Three sand and six hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 12 | Providing and laying in position , standardised concrete mix M-25 grade in accordance using 20mm with IS:456-2000 ,and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350kg/m3 and maximum water cement ratio of 0.5, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate , retard setting of concrete , improve workability without impairing strength and durability with about 5 cu.m 7730 kg of 20mm machine crushed stone jelly and with about(3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7676kg of sand but excluding cost of reinforcement grill and fabricating charges , centering and shuttering and also including laying , vibrating with mechanical vibrators, finishing , curing, etc. and providing fixtures like fan clamps in the RCC floor/roof slabes wherever necessarywithout claiming extra , etc complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No seperate payment will be made by the department for the excess usage of materials). |
| 13 | Beyond 1.50m below Ground level |
| 14 | Foundation & basement(upto 1.5m below G.L and upto 1m above G.L) |
| 15 | Ground floor upto 4.5m |
| 16 | First floor above 4.5m to 5.6m |
| 17 | Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 18 | Foundation and basement |
| 19 | Ground floor |
| 20 | First floor |
| 21 | Brick partition walls of 11.50mm thickness using best quality II class ground moulded chamber burntbricks of sizein Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 22 | Supplying and erecting shutteringincludingnecessary supports for plane surfaces such as RCC footings, plinth beam, staircase steps, RCC critical pier etc., complete in all floors. |
| 23 | Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm x60cm x and B.G 10 stiffened with M.S angles of size 25 x 25 x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed by the Departmental Officers- (P & D) Data 38department officers. |
| 24 | For Rectangular beam slab waistslab landing slab etc. |
| 25 | For square or rectangular column sill slab,sunshade,fascia,fins,drops,etc |
| 26 | Vertical surfaces |
| 27 | Supplying and erecting special centering for sides and soffits including supports and strutting all with all cross bracings for plane surfaces as detailed below, using mild steel sheet of 90cm x60cm 10 guage stiffened with M.S. angle of 25 x 25 x 3mm for boarding, laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by steel cribs complete in all floors complying with standard specification.(The payment for centeringwill be made only after the concrete is laid) |
| 28 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 29 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 30 | Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case stpes, landing slabs etc with C.M. 1:3 (One cement and three sand) 10 mm thick including hacking the surfaces necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complyingwith standard specification and as directed by the departmental oficers etc., complete |
| 31 | Plastering with Cement Mortar 1:3 (One cement and Three sand), 20mm thickincluding curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 32 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 33 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm.The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber.The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 34 | Supplying fabricating and fixing in position of Aluminium colour anodised 1/2 panelled and 1/2 glazed door.The door frame shall be of colour anodised aluminium box type section of size 101.6x44.45x 3.18mm @ 2.319 Kg/m. The shutter frame shall be of aluminium anodised box type section of size 50x44.45x2.5mm @ 1.202 Kg/m for vertical styles & top rails. The Lock raills shall be using box type section of size 50x 44.45x2.5mm @ 1.292 Kg/m and bottom rail shall be box type section 100.40x44.45x2.5mm @ 1.974 Kg/m.The bottom portion of shutter shall be panelled with 12mm thick best quality both sides prelaminated MDF board.The top portion of the shuttershall be panelled with 5.5mm thick plain glass and rubber beading and Aluminium glazing clip of size 17.15x17.27x1.5 @ 0.176 Kg/m shall be used for fixing glass and 12 mm thick prelaminated MDF board with shutter and including fixing necessary furniture fittings such as Aluminium tower bolts, Lock, Aluminium door stopper with nylon bush, Aluminium hinges, floor spring and necesaary Aluminium angles, steel screws, plug etc. labour charges for fabrication & fixing and for dismantling RCC or masonry and redoing the same to the original conditions including charges forelectric power consumption. |
| 35 | UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 36 | Manufacturing, supplying and fixing M.S. grill for Windows and Gate shutter etc, including priming coat |
| 37 | Flooring with Double Charged Vertified Tiles of size 800 x 800 x 10 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 38 | Flooring with Self Designed colour ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 39 | Paving the floor with cement based hydraulically pressed anti-skid flooring tiles (Like Eurocan tiles) in all floors with pattern design of size 305 x 305 x 20mm of approved quality and colour set in cement mortar 1:3 (one cement and three sand) 20mm thick and pointing with white cement mixed with colouring pigments to full depth of tiles perfectly and neat finishing the joints and curing.The rate shall be inclusive of cost of tiles, taxes, incidental charges, transportation charges and labour charges for fixing the tiles, neat finishing the joints, curing, as directed by the departmental officers etc., complete complying with standard specification.The tiles should be got approved by the departmental officers before use on work. |
| 40 | Dadooing walls with approved best quality Ceramic tiles of size 300 x 600 x 10mm, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 41 | Dadooing walls with approved best quality Double Charged Vertrified Tiles 600 x 600 x 8mm, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 42 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 43 | Finishing the roof with one course of pressed tiles of size 23x23x2cm of approved quality laid in cement mortar 1:3, 20mm thick mixed with 2% water proofing compound (conforming to Indian Standard specification) by weight of cement used and pointed withthe same mortar including mixing of red oxide etc. complete. |
| 44 | Supplying and fixing in position best approved quality of PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.(a).160mm dia. |
| 45 | Painting New Iron works for grills and steel balustrades etc. with two coats of approvedquality and colour of synthetic enamel paintover existing priming coat etc. including scrapping and preparation of surface and cost of brush, scaffolding and complying with standard specification (The quality and colour of paint to be approved by EE before use on works). |
| 46 | Providing pre construction antitermite treatment using approved chemicals as per IS 6313 part 2 of 1981. The rate shall include all materials and labour for preparing the area for treatment, spraying antitermite chemical solution for foundation before laying foundation. Spraying of termicide (0.5%) concentrate solution to the grade beam level and brick masonry in in contact with back fill earth. Spraying termicide solution on sand for the flooring before laying the concrete. The treatment should be carried out on the sand filling in basement after leveling operation over making crow bar holes at 30cm intervals to a depth of 23cm in the outer periphery of the building on chemical poured inside the holes and closed after treatment. |
| 47 | Constructing rain water harvesting pit of size 1.5 x 1.5 x 1.2 m in B.W 23 cm thick wall withnecessary earth work, using CM 1:5 foundation with sand filling -10 cm thk,PCC 1:5:10 -10 cm thk,Inner size 1.00 x 1.00 x 1.2 m and necessary inner and outer plastering with cm 1:5 -12 mm thk, and filling with filter media 30 cm thk of sand, coarse aggregate and RCC cover slab 12 cm thk., excluding cost of reinforcement |
| 48 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). |
| 49 | Supplying and fixing in position best quality and approved make Indian made whiteglazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 50 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works). |
| 51 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 52 | Supplying and fixing PVC Water Tank (1000 LITRE) with all fittings including loading, unloading and lifting the tank to terrace and fixing properly to the existing GI lines without disturbing the masonry structures etc., complete complying with standard specification and as directed by the Departmental officers. |
| 53 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality of following dia including cutting, threading and fixing PVC specials using PVC adhesives including cost of all specials and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 54 | 15mm dia PVC pipes |
| 55 | 20mm dia PVC pipes |
| 56 | 25mm dia PVC pipes |
| 57 | Providing & Fixing Staircase hand rail made out of50.80mm dia stainless steel tube of 1.60mm thick at required locations to a height of 1000mm from finished floor level, welded to 38.10mm dia S.S.tube post of 1.60mm thick as vertical at 1m centre to centre with 3 nos of 25.40 mm dia horizontal S.S.tubes of 1.60mm thick in between as per details shown in the drawing and as directed. Rate shall include for grouting into concrete with necessary supporting arrangements in hand rail vertical and in floor, welding the base cup of post into slab reinforcement polishing.buffing and protecting the hand rail surface etc.complete as directed by the departmental officers. |
| 58 | Supplying and fixing in position best quality PVC soil waste pipes of various size having ISI mark and pressure of 6 Kg./Sq.cm providing leak proof joints with PVC adhesive etc. including fixing to the walls with necessary T.W. plugs, brass screws mild steel clamps etc. and giving connection to the sanitary fittings including dismantling brick masonry /RCC works / roof slab etc. wherever necessary and making good the dismantled portion to the original condition, complying with standard specifications etc. complete (The PVC pipe should be got approved by the Departmental Officer before use on works). |
| 59 | 75 mm dia PVC Pipe |
| 60 | 110 mm dia PVC Pipe |
| 61 | 160 mm dia PVC Pipe |
| 62 | Supplying and fixing in position 150x100mm square mouth P or S trap stone ware gully trap with cast iron grattings of size 150x150mm with c.I air tight cover with necessary earthwork excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150mm thick using 40mm size brick jelly including necessary brick work and plastering and giving connection to soil pipe etc., complete |
| 63 | Supply and fixing in position mirror of size 600x450mm of approved quality and brand of size with necessary plastic ,PVC frame with bottom stand of approved color with brass screw, rawal plugs etc., complete complying with standard specification and as directed by the Departmental officers. The quality of mirror should be got approved by the Excutive Engineer before use on work. |
| 64 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong lockingsystems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work |
| 65 | Supplying and fixing C.P screw down tap 15mm dia.including cost of shellac,thread ball etc., |
| 66 | Supply and fixing in position gun metal wheel valve with ISI including cost of shellac, thread etc, including labour for cutting and threading. |
| 67 | 25mm dia.Wheel valve |
| 68 | 20mm dia.Wheel valve |
| 69 | Supplyimg and fixing PVC nahini trap 100x75mm including all materials and labour. |
| 70 | Supplying and fixing SolidPVC door shutter with PVC frame of size 50x45mm with suitable rebate for housing the shutter consisting of frame made out of MS tubes 19 gauge thickness and size of 19x19mm for styles and 15x15mm for top and bottom rails, M.S. frame shall be covered with 5mm thick heat moulded PVC "C" channel of size 30x50mm forming styles and 75x50mm for top rail, lock rail and bottom rail on either side and 10mm thick 20mm wide cross PVC sheet as gap insert for toprail, bottom rail. Panelling of 5mm thick PVC sheet bearing on either side and join to gether other side etc., An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the "C" channel using PVC sealant adhesive including cost of all furniture fittings such as aluminium aldrop of size 250x16mm - 1No. aluminium tower bolt 250x12mm - 1No. aluminium D type handled 200mm etc., complete complying with standard specification and as directed by the departmental officers. |
| 71 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm "P" or "S"" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 10 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. (The EWC should be got approved by the ExcutiveEngineer before use on works) |
| 72 | Supplying and fixing in position best quality and approved make Lipped Mouth porcelain Flat Back Urinal with all accessories such as 32mm dia bell Mouth PVC connection, 15mm dia GM wheel Value, 15mm dia "B" class GI waste water pipe, 15mm dia Nylon connection, 15mm dia brass nipple etc.(It should be got approved by Executive Engineer before use on works). |
| 73 | Supply, Erection, Testing, Commissioning and Handing over of 1No 8 Persons Passenger Lift as per following technical specifications including all taxes and duties Technical Specifications: 1. Location:Hospital, Nagarcoil Medical collage. 2. No of Lift: one Nos. 3. Type of Lift: Gearless without Machine Room. 4. Capacity of Lift :8 Persons. (590 Kgs) 5. Speed: 1.00 mtr / Sec 6. Type of Drive: Microprocessor based specific variable voltage variable frequency V3F with enhanced ride comfort and near zero leveling functions. VVVF Drive. 7. No of floor: Ground + 1floors. 8. Total Travel:19.2 mtrs approximate 9. Leveling Accuracy: High level accuracy with smooth & Jerk free stopping. 10. Construction of car: Special car madeof Stainless Steel hairlinefinish No.4 hair line finish & panelswith Direct lighting and New Beautiful Single Tile false ceiling with Tubular Handrail and mirror. 11. Position of Machine: Directly above the liftwell shaft gearless. 12. No. of Landing Entrance:One in front - 5 Nos only. 13. No. of Car Entrance: One in front only. 14. Car Entrance Door: Centre openingautomatic power door with stainless steel No.4 Hair Line finish with view panel operated centre opening SS cars. 15. Landing Entrance Door:Centre openingautomatic power door with stainless steel No.4 Hair Line finish with view panel Power operated V3F Drive Centre opening stainless steel No.4 Hair line finish with view panel . door with provision for emergency key opening at all landing. 16. Car size: 1600mm widex 2400mmdeep (part 1) 17. Car clear Opening: 1200mm x2000mm (as per IS 14665 (part 1) -2000 (wide) x 2000mm Height. (as per IS 14665 (Part-I)-2000). 18. Lift well : 2400mm(width)x3000mm (depth) (as per IS4665 part-1) 19. Lift pit depth available: 1600mm 20. Power supply : 415V,400/440v, 3 phase, 50 cy / Sec A.C supply for power and230V, 50 Hz single phase AC supply for light. 21. Control: Microprocessor Computer based - simplex collective full collective logic system with or without attendant mode.22. Car fittings:Indirect fluorescent light & Fan. 23. Lift Well: RCC construction with Brick masonry existing. 24. Lift Machine Room: As per standard specification1800mm (Width) x 1500mm(depth) (as per IS 14665 (Part-5) - 2000) 25. Induction: Up / Down Digital Direction scroll typeand position indicator for all landing and in car. 26. Emergency Alarm Bell: Battery Operated Alarm Bell to be provided with automatic charging device. 27. Emergency Light: Battery operated Light to be providedwith automatic charging device. 28. Fireman"s switch: To be provided at ground floor. 29. Minor Builders Work: To be provided by lift contractor. 30. Scaffolding: To be provided by lift Contractor. 31. Stainless Steel still angles and facia Plates: To be provided by lift contractor. 32. Steel for lift Machinery: To be Provided by lift contractor. 33.Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarntee period of one year 34. Provision of 1+3 EPABX intercom with phone to be provided at the following places vide 1. Lift Head Room 2. Reception Room and 3. Inside the Lift by lift contractor. 35.Lift License: Preparation of drawing , payment of charges to CEIGand insurance policy if any and obtaining CEIG safety certificate and lift license as per lift act should be done by the lift contractor. 36. Automatic rescue device: To facilitate the landing of the nearest floor at the time ofpower failure. This shall consist of suitable type battery system with charger inverter under voltage protection system etc. 37. Fire proof can with stand for 2 hours.38.Disable friendly feature are addted as per disable act SOR rate (2021-22) (Make : OTIS/KONE/Johnson/Eq)/ |
| 74 | Paving the floor with approved best quality Jet Black Granite Slab (Super Fine Polished with Machine cut Edges) of sizes4"0""x2"0"" and above 18mm to 20mm tkof approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. |
| 75 | Supplying and laying of hydraulic pressed inter locking designer paver blocks of M 30 grade 63mm thick of approved design to withstand pressure includinglaying of base layer of 30cm thick Stone Dust including watering compacting by using earth rammer and plate vibrator etc., complete and as directed by the department Engineers. |
| 76 | Supplying and fixing of Teak wood main door with double leaf the following specification. 8’x8’ Teakwood Main Door Frame size – 5”x4”. Door Size – 4’x8’-2 Nos. and thickness – 1.5”. Frame -2”x1.5”. Door locks set, Keel, Stopper, Inner & Outer handles and two coat polish. The rate is inclusive cost of fixing charges, transportation, loading, unloading charges. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
