|
| 1 | Dual Adjustable Pulley/DAP Performance (+Weight Stack)Technical Specifications:• Main Frame Size: 100x50 mm Oval Frame of 3MM Thickness. Heavy metal bending technology to ensure superior strength & to eliminate joint failure• Coating: 2 Coat Powder Coated System for scratch resistance and long life• Rubber Sheet For floor protection• Dual Weight Stacks – Each 100kgs• Wide range of pull up Bars• Pulley - Fiberglass Reinforced Nylon Bearing Pulley• Adjustment: Each side 35 level of Independent multi-position pulley columns which can allow single and dual exercise options• Swivel Handles Proved Free and Natural movement• Standard Accessories: 3ft Flat Push-up Bar 1 no, Dhandle rope 2 nos, chest workout rope 2nos and Triceps bar 1 no• Shrouds: Material - Steel Sheet Fully Covered Front and Back Shrouds• Exercise Placard (Workout Chart)• Machine Dimension (L x W x H): 2173*861*2342mm• Machine weight: 421 kgs• Accessories: Sports Bar, Dap Bar, Tricep Straps, Thigh Straps, Ankle Strap - 1 Pc Each• Product certification: BS EN ISO 20957-2:2021•Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 2 | Kneeling Easy Chin Dip Technical Specifications:• Frame Size- 100 x 50 mm Flat Oval Tube, 2.5mmthickness• Finish - 2 Tone Electrostatic Powder Coat• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Floor Protection: High Density PVC Foot Guard• Compact Design that allows user to perform dips, chin ups, leg raises and ab crunch• Dual Function support pad for both Vertical knee Raise and Ab Crunch Exercise• Angled Arm Rest to offer stable positioning for Vertical knee Raise Exercise.• Dimension: 49\" x 43\" x 85\" minimum (L x W x H)• Stack Weight: 98 Kg• Machine weight: 240 kg• Product certification: BS EN ISO 20957-2:2021• Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered |
| 3 | Left Adductor/ Abductor Machine Technical Specifications:• Main Frame Size: 140x50 mm Oval Frame of 3 mm Thickness. Heavy metal bending technology to ensure superior strength & to eliminate joint failure.• Leg Arm movement pipe size: 50mm round pipe of 3mm thickness• Leg pad adjustment levels: 2 level for short and height users• Weight Stack: 231 Lbs Steel Weight Stack with Bushing for smooth & Noiseless workout• Cable: 5mm Steel pre lubricated Wire with PU coating, Tensile Strength of 2200Lbs Weight loading capacity• Pulley - Fiberglass Reinforced Nylon Bearing Pulley with fully covered with nylon cap.• Paint Coating: 2 Coat Mat finished Powder Coated System for long & scratch proof life• Shrouds: Material – fiberglass Fully Covered in front and back side• Shall have Water bottle / Mobile holder provision• Workout Chart shall be on the machine for easy understanding• Workout Future: sitting and standing supporting with handlebars• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Machine Dimension:Minimum1536*730*1689mm• Machine weight: 250kg or more.• Product certification: BS EN ISO 20957-2:2021Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 4 | Plate Tree Technical Specifications:• Frame - 100 x 50 mm Flat Oval Tube, 2.5mmthickness min• Paint Finish - 2 Tone Electrostatic Powder Coat• Floor Protection: High Density Rubber Foot Guard• Rubber bumpers on horns to protect frame finish• 8 Chromed Storage Horns for Olympic Plates• Machine weight: 30kg• Dimension (L x W x H): 2172*864*2337mm• Product certification: BS EN ISO 20957-2:2021Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered |
| 5 | 10 Place Barbell Rack Technical Specifications:• Frame - 100 x 50 mm Flat Oval Tube, 2.5mmthickness min• Paint Finish - 2 Tone Electrostatic Powder Coat• Floor Protection: High Density Rubber Foot Guard• Capacity: 10 Barbells Holder - 5 Each Side• Finishing: Barbell holder shall be Crome Finish• Dimension: 37\"x 36\"x 65\" minimum (L x W x H)• Product Weight: 35kg• Product certification: BS EN ISO 20957-2:2021Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 6 | Gym Sled Technical Specifications:• Product weight – 31 kg• Dimension: 1000*600*1000mm• Weight capacity- 100kg or more• Product certification: BS EN ISO 20957-2:2021Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 7 | Smash Ball Set (2kg, 4kg, 6kg, 8kg, 10kg,12kg, 15kg, 20kg)Technical Specifications:• Strong rubber construction• Ideal for slamming/Smashing exercise• Product certification: BS EN ISO 20957-2:2021• One Set comprises of 8 numbers of smash balls each of 2kg, 4kg, 6kg, 8kg, 10kg, 12kg, 15kg and 20kg. |
| 8 | Medicine Ball Rack(10 Balls per set)Technical Specifications:• Pipe material – MS pipe• Capacity- 10 nos 5nos each side• Pain finishing: powder coating• Product weight: 15kgProduct certification: BS EN ISO 20957-2:2021 |
| 9 | Swiss Balls - 2 sizes each(Medium – 55 cm & Large -65 cm & XL – 75 cm)Technical Specifications:• Material: Anti-burst PVC technology• Thickness – 2mm• Weight capacity- 300kg• Futures - Exercise guide is printed on the gym ball• Package including Pump• Anti-Burst & Sturdy Anti-Slip Design• Product certification: BS EN ISO 20957-2:2021• Size of Medium – 55 cm, Large – 65 cm and XL -75 cm.One set comprises of 3 balls one each of Medium, Large and XL size |
| 10 | Exercise MatsTechnical Specifications:• Material: TPE material (Thermoplastic Elastomers)• Grip – nonslip grip and tear resistance .6 to 1.2kg• Thickness:6mmProduct certification: BS EN ISO 20957-2:2021 |
| 11 | Balance DomesTechnical Specifications:• Color: purple• Material: PVC and Polypropylene with anti-slip grip• Product weight:5kg• Weight capacity: 300kgProduct certification: BS EN ISO 20957-2:2021 |
| 12 | Power Bands (Black)Technical Specifications:• Texture: Comfortable and Non-slip Material:• Natural rubber Latex• Weight: 37 to 67 kgProduct certification: BS EN ISO 20957-2:2021 |
| 13 | Power Bands (Red)Technical Specifications:• Texture: Comfortable and Non-slip• Material: Natural rubber Latex• Weight: 18 to 42 kg• Product certification: BS EN ISO 20957-2:2021 |
| 14 | Power Bands (Green)Technical Specifications:• Texture: Comfortable and Non-slip• Material: Natural rubber Latex• Weight: 6 to 13 kg• Product certification: BS EN ISO 20957-2:2021 |
| 15 | GHD BenchTechnical Specifications:• Frame - 100 x 50 mm Flat Oval Tube, 2.5mmthickness min• Paint Finish - 2 Tone Electrostatic Powder Coat• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Floor Protection: High Density PVC Foot Guard• Adjustable Position: 4 Seat Pad position and 7Back Pad Positions adjustments for precise positioning• The Seat Pad Adjustments from -15 deg to - 80Deg while back Pad adjusts from 3 seat angle adjustment• Futures: Leg hold pad support for balancing the decline workouts• Dimension: 1420*670*1400 mm (L x W x H)• Product Weight: 46kg• Product certification: BS EN ISO 20957-2:2021 |
| 16 | Olympic Full RackTechnical Specifications:• With Platform: Lift area made of 25mm heavy laminated wood board & drop area made of 25mm rubber• Main frame Size: 72 *72 with 3mm thickness• Base frame: 100*50mm size with 3mm thickness• Pull up bar: 33mm dia with 3mm thickness• Bar holding adjustment levels: 15 level• Handles / Grips: Grips Non-Absorbing PVC compound retained with aluminum end Cup• 4 integrated weight storage harms to hold multiple weight plate sizes• Paint Coating: 2 Coat Mat finished Powder Coated System for long life• Futures: J Hook with HDPE protector, Olympic rod storage and heavy-duty spotter arm 4*4 inch• Machine weight: 125kg• Dimensions(L*W*H): 1560 * 1760* 2320mm• Product certification: BS EN ISO 20957-2:2021 |
| 17 | Power Rack Accessories PackTechnical Specifications:• Power rack accessories pack including: Multi grip dip, barbell pivot, band attachment, weight storage, barbell storage, external J hook support, foldable footplates• Barbell pivots can accommodate 50mm or small barbells to perform variety of exercise• Weight storage on power rack is able to store upto 300 kgs on each side• Product certification: BS EN ISO 20957-2:2021 |
| 18 | Flat Incline and Decline (FID) Bench/ Adjustable BenchTechnical Specification:• Frame - 100 x 50 mm Flat Oval Tube, 2.5mmthickness min• Paint Finish - 2 Tone Electrostatic Powder CoatUpholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, Covered with heavy double stitched leatherite rexine.• Floor Protection: High Density PVC Foot Guard• Adjustable Position: 4 Seat Pad position and 7 Back Pad Positions adjustments for precise positioning The Seat Pad Adjustments from -15 deg to - 80 Deg while back Pad adjusts from 3 seat angle adjustment• Futures: Leg hold pad support for balancing the decline workouts• Dimension: 1420*670*1400 mm (L x W x H)• Product Weight: 46kg• Product certification: BS EN ISO 20957-2:2021 |
| 19 | 2 Tire Dumbbell Rack (14 Pair)Technical Specifications:• 2 Tier dumbbell rack• Frame - 100 x 50 mm Flat Oval Tube, 2.5mmthickness min• Paint Finish - 2 Tone Electrostatic Powder Coat• Floor Protection: High Density Rubber Foot Guard• Rubber bumpers on horns to protect frame finish• 8 Chromed Storage Horns for Olympic Plates• Machine weight: 30kg• Dimension (L x W x H): 2172*864*2337mm• Product certification: BS EN ISO 20957-2:2021 |
| 20 | Dumbbell Set in Pair (2.5- 32.5Kg, Increment of 2.5 Kg)Technical Specifications:• Hexagonal shape• Steel coated with Hard welding & impact resistant TPU at both ends• Won’t release any smell• Accurate weight• Product certification: BS EN ISO 20957-2:2021 |
| 21 | Set Urethane Encased New Disks 50mm (1.25 kg-20 kg)Technical Specifications:• Steel coated with Hard-weing & impact resistant virgin rubber• Won’t release any smell• Accurate weight• Product certification: BS EN ISO 20957-2:2021 |
| 22 | Olympic Power Bar HC- Diameter-50 MM (20kg, 15kg, and 10kg)Technical Specification:• Olympic Rod with Brass Bearing to ensure free movement• Product certification: BS EN ISO 20957-2:2021• 20 Kg – 7.2 ft (Length) with 50mm sleeves & 28mm centered rod with knurling toensure superior grip• 15 Kg – 6.6 ft (Length) with 50mm sleeves & 25mm centered rod with knurling toensure superio• 10 Kg – 5.6 ft (Length) with 50mm sleeves & 25mm centered rod with knurling to ensure superior gripEach set contains 20 Kg, 15 Kg, 10 Kg Power Barr grip |
| 23 | Olympic Style EZ Curl Bar-Diameter-50 MMTechnical Specifications:• Olympic EZ Bar with Brass Bearing to ensure free movement• 50mm sleeves & 30mm centered rod with knurling to ensure superior grip• Product certification: BS EN ISO 20957-2:2021 |
| 24 | Flat BenchTechnical Specifications:• Frame Size- 100 x 50 mm Flat Oval Tube, 3.0 mm thickness• Finish - 2 Tone Electrostatic Powder Coat• Floor Protection: High Density Rubber Foot Guard• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Machine Weight: 30 Kgs• Product certification: BS EN ISO 20957-2:2021 |
| 25 | Plyometric Boxes (25cm, 30cm, 35cm,40cm, 45cm, 50cm)Technical Specifications:• Metal tube construction• Heavy duty to ensure safety & stability• Virgin rubber covered on the top• Product certification: BS EN ISO 20957-2:2021• One Set comprises of 6 numbers of plyometric boxes one each of 25cm, 30cm, 35cm, 40cm, 45cm and 50cm. |
| 26 | Lower Back BenchTechnical Specifications:• Frame - 100 x 50 mm Flat Oval Tube, 2.5 mm thickness.• Paint Finish - 2 Tone Electrostatic Powder Coat• Cushions: 2\" High Density Cushion Covered in Stitched Vinyl• Floor Protection: High Density PVC Foot Guard• Adjustable 4 different position for exercise variation from 30 Deg to 45 Degrees• Thigh Pad position shall be adjustable 10 positions to accommodate varying user heights• Machine weight: 47kgs• Dimension: 53\" x 31\" x 22\" minimum (L x W xH)• Product certification: BS EN ISO 20957-2:2021 |
| 27 | Abdominal Crunch BenchTechnical Specifications:• Frame - 100 x 50 mm Flat Oval Tube, 2.5mmthickness min• Paint Finish - 2 Tone Electrostatic Powder Coat• Cushions: 2\" High Density Cushion Covered in Stitched Vinyl• Floor Protection: High Density PVC Foot Guard• Back Support pivot into 8 different positions for workout from 10 to -25Deg• Handle is mounted on Front rollers for easy exit• Machine Weight:47kgs• Dimension: 68\" x 31\" x 35\" minimum (L x W xH)• Product certification: BS EN ISO 20957-2:2021 |
| 28 | Smith MachinesTechnical Specifications:• Main Frame Size: 100mm Round Pipe with 100x50 mm Oval Frame Of 3mm Thickness or similar dimensions with round/oval shape.• Coating: 2 Coat Powder Coated System for scratch resistance and long life• Counter – Hidden counter Balanced Weight for ease of use by all level• 6 integrated weight storage harms to hold multiple weight plate sizes• Rubber Sheet For floor protection• 10 holding level with Adjustable Stopper for smooth and safe motion• 20 Kg Olympic bars with Linear Bearing for smooth motion• Rod / Plate Holder - Crome Plated• Machine Dimension (L x W x H) :2251*1178*2195mm• Machine weight: 192kg• Product certification: BS EN ISO 20957-2:2021 |
| 29 | Wall bar Max load of 200 kgTechnical Specifications:• Made of solid wood columns attached with zinc plated strong steel tubes• Max Load capacity: 200 Kgs |
| 30 | Medicine Balls (3, 4,5, 6,8,10 kg)Technical Specifications:• Made of rubber with bounce effect• Product certification: BS EN ISO 20957-2:2021• One Set comprises of 6 numbers of medicine balls each of 3kg, 4kg, 5kg, 6kg, 8kg, and 10kg |
| 31 | TreadmillTechnical Specifications:• Motor System: AC 5.5 HP Continuous, 10.0 HP- Peak with a tolerance of +/- 10%.• Motor Drive: Rhymebus Drive System/ similar quality Drive System connecting with line filters. Must ensure protections such as low/high voltage, high temperature. With Cooling Fan.• Speed Range: 0.5-25 Km/hr,• Incline range: 25 level or 20% to 25% with a tolerance of +/- 5%.• Display Screen: 18.5 inch LED display• Display Readouts: Time, Speed, Distance, Incline, Heart Rate & Calories• Touch buttons – sensitive touch pad with quick speed, incline & program• Programs :8 exercise program (warm up, run slowly, climbing, stroll, climb mountain, track &field, reduce weight, running) 3 customized programs• Running Surface:163*59cm• Running Belt: 3 mm Thickness Commercial Grade3 play (Seigling Germany)• Deck: 25mm Commercial Grade Carbon Coated Reversible Deck• Rollers: 90 mm size for smooth and comfortable movements• Step up Height : 240mm from ground to running surface• Shock absorption – Plane damping system feel like outdoor running and natural landing• Entertainment Options: High-Power system, MP3Audio input with USB port• Safety Features: Double safety protection function with both emergency stop and soft stop• Handle material - PU handrail for easy holding• Product assembly area- 215*98*162cm (85*39*64)• Additional Features:• Handheld heart rate sensor• Recovery pattern movement (1-8km/h) for rehabilitation• lower energy consumption design, application for wider voltage range• Extra large foot rail for easy handing.• User Weight: 200kgs• Machine weight: 245/275 kg (N.W. / G.W.)• Product certification: BS EN ISO 20957-2:2021 |
| 32 | Spin CycleTechnical Specifications:• Magnetic Control Spin Bike• Rear Wheel Drive for smooth and natural motion• Drive System - Belt• Seat - Ergonomic Seat• Handel Bars - Rubber coated multi- position handlebar• Adjustment Handle; Up / Down and Front / Rear Adjustment.• Aluminum Seat Handle; Up / Down and Front /Rear Adjustment. Aluminum Material• Drive Shaft - 45Dia• Crank Thickness - 14mm• Peals - Aluminum Dual-Side pedal with Strap• Bottle Holders - yes• Rear Wheel - Aluminum Material• Resistance Control - Smooth Up and Down Resistance Control• Moving Wheels |
| 33 | Elliptical Cross TrainerTechnical Specifications:• Elliptical trainer with handle arms, Suspension Elliptical Trainer with Rear-Wheel-Drive Stride length: 21\"• Power: Adaptor source with powered motorized incline of 15 level• Resistance Level: 20 levels Magnetic min 300WATTS,• Programs: 12 Preset programs - Manual, Interval, Weight Loss, target heart rate, fit test random, warm up and warm down Etc• Display: Single led dot matrix display. size 340mm*440mm• System: EMS• Display Readouts shall have Calories, Time, Speed/RPM, Pulse, Distance, Watts, incline level, resistance level• Machine extra features: hand pulse, water bottle cage, I-pad & mobile holder, USB charger, mp3 socket + speaker in display, heat protected cooling fan in display• Foot Pedal: Shall be minimum 20x30cm with cushion for smooth workout Quick keys Display functions• Max User Weight :180 Kgs• Step up height: Shall be 30cm maximum• Machine Weight: Minimum 140kg net weight, machine dimension: 2150 x 770 x 1940 mm (84*30*76”) LxWxH• Product certification: BS EN ISO 20957-2:2021 |
| 34 | Shoulder PressTechnical Specification:• Main Frame Size: 140x50 mm Oval Frame of 3 mm Thickness. Heavy metal bending technology to ensure superior strength & to eliminate joint failure.• Arm movement frame size: 50mm round pipe of 3mm thickness with unilateral movement• Weight Stack: 231 Lbs Steel Weight Stack with Bushing for smooth & noiseless workout• Cable: 5mm Steel pre lubricated Wire with PU coating, Tensile Strength of 2200Lbs Weight loading capacity• Pulley - Fiberglass Reinforced Nylon Bearing Pulley with fully covered with nylon cap.• Paint Coating: 2 Coat Mat finished Powder Coated System for long and Anti scratch life• Shrouds: Material – fiberglass Fully Covered in front and back side• Shall have Water bottle / Mobile holder provision• Workout Chart shall be on the machine for easy understanding• Handles Grips: Grips shall be Non-Absorbing PVC compound retained with endAluminium Cup for longs lasting life• Handle: Each side 3 different handle position for variant users with unilateral workout arms for best result and added extra future counter balancing arms for smooth workout.• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Seat Adjustment – Supported Hydraulic piston for Up and Down Smooth height adjustment, and front and back seat 3 level adjustment for variant height users• Machine Dimension: Minimum 1675*1444*160 mm• Machine weight: 250kg or more.• Product certification: BS EN ISO 20957-2:2021• Warranty: Lifetime on frame, 02 years on all other parts including cable, pully excluding plastic parts, foam grips & Upholstery• Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 35 | Multi StationTechnical Specifications:• Workout Chart shall be on the machine for easy understanding.• Upholstery: Shall be High Grade double stitched• Cable: 5mm Steel Wire with PU coating, Tensile Strength of 2200Lbs Weight loadingcapacity• Floor protection: Rubber Sheet For floor protection• Water bottle holder in 2 sides• Station-1 • Lat pull down• Stack weight 100kg• Pulley movement: swaying type Dual closed pulley movement for smooth workout balance• Workout support: leg holder pad for heavy workout support• Handles Grips: Grips shall be Non-Absorbing PVC compound retained with endAluminium Cup for longs lasting life• Station -2• Triceps workout Stock weight:100kg• Pulley movement: single closed pulley movement support for rope safe traveling• Workout support: Back pad support for avoiding the injuries• Accessories: 300kg load capacity triceps rope included• Station-3• Seated rowing• Stack weight: 100kg• Long height durable seat support for variant height users• Pulley movement: swaying type dual pulley movement will give natural workout movement• Leg balancing support give more effective during heavy load• Accessories: heavy duty D rope handle included• Station-4• Cable column for Hi/Low Cross• Stack weight:100kg• Pulley adjustment: 32 level with saying pulley movement• Adjustable Guide Rod: Stainless steel 70*30mmpipe size• Features:• having provisions to upgrade cable cross over machine in future• Product certification: BS EN ISO 20957-2:2021• Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 36 | Leg PressTechnical Specification:• Plate Loaded Machines• Main Frame Size: 100x50 mm Oval Frame x 3mmand more Thickness Minimum• Travel Track: 60mm Diameter Polished Crome Plated Pipe• Load carrying carriage shall have heavy duty nylon roller (Size5 Position Adjustable Back Rest• Dual Starting point and 2 adjustable stop points to accommodate users of all sizes• Easy to use Racking Mechanism with Aluminium handles• Large Non- Skid Foot Platform to accommodate variety of movements• 4 integrated weight storage harms to hold multiple weight plate sizes• Rubber Sheet For floor protection• Load Carrying Capacity: 500 Kgs• Dimension (L x W x H): 2693*1423*1448 mm• Product certification: BS EN ISO 20957-2:2021 |
| 37 | Total AbdominalTechnical Specifications:• Main Frame Size: 100x50 mm Oval Frame x 3mmand more Thickness Minimum• Paint Finish - 2 Tone Electrostatic Powder Coat• Cushions: Dural High Density cushion covered in Snitched vinyl• Handle: High Quality Aluminum• Start the body in an upright posture with excise handles overhead to pre-stretch the abdominal muscles Pivoting Seat Pad provides multiple abdominal excises and results in greater activation of the core musculature• Adjustable Seat pad be locked in place or unlocked for pivoting movement• Machine weight: 144kgs• Dimension: 44\" x 44\" x 63\" (L x W x H)• Product certification: BS EN ISO 20957-2:2021 |
| 38 | Urethane PlateTechnical Specifications:• (2.5 Kg - 15 kg with a barbell 10 kg and 15 kg(7ft) |
| 39 | Olympic BenchTechnical Specifications:• Frame Size- 100 x 50 mm Flat Oval Tube, 3.0 mm thickness• Finish - 2 Tone Electrostatic Powder Coat• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine. marine plywood, covered with heavy double stitched leatherite rexine.• Floor Protection: High Density PVC Foot Guard State of the art innovative Incline, decline & flat adjustable• With Squat Rack• Machine Weight: 94 Kgs• Product certification: BS EN ISO 20957-2:2021 |
| 40 | Leg Press / Calf RaiseTechnical Specifications:• Main Frame Size: 140x50 mm Oval Frame of 3mm• Thickness. Heavy metal bending technology to ensure superior strength & to eliminate joint failure.• Seat adjustment: Back seat support adjustable upto 80deg to 2deg• Hack squat support: 2 pad support for shoulder and 1 pad for neck support• Workout: seated leg press, calf raise & covered with hack squat• Travel track: SS 304 or chromed material with dual guide rod size of 28mm or more• Leg plat form: Dual or multiple position large size pad with curved pattern support for multiple leg group muscle• Bearing: high grade leaner bearing• Weight Stack: 308 Lbs Steel Weight Stack with Bushing for smooth workout• Cable: 5mm Steel Pre-Lubricated Wire with PU coating,• Tensile Strength of 2200Lbs Weight loading capacity• Pulley - Fiberglass Reinforced Nylon Bearing Pulley with fully covered with nylon cap.• Paint Coating: 2 Coat Mat finished Powder Coated System for long life• Shrouds: Material – fiberglass Fully Covered in front and back side• Shall have Water bottle / Mobile holder provision• Workout Chart shall be on the machine for easy understanding• Handles and support rod Grip: Grips shall be Non-Absorbing PVC compound retained with end Aluminium Cup for longs lasting life• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Machine Dimension: Minimum:1983*1022*1602mm• Machine weight: 311kg• Product certification: BS EN ISO 20957-2:2021• Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 41 | Leg Extn. / CurlTechnical Specifications:• Main Frame Size: 140x50 mm Oval Frame of 3mm• Thickness. Heavy metal bending technology to ensure superior strength & to eliminate joint failure.• Weight Stack: 231Lbs Steel weight Stack with Bushing for smooth & noiseless workout• Cable: 5mm Steel pre lubricated Wire with PU coating, Tensile Strength of 2200Lbs• Pulley - Fiberglass Reinforced Nylon Bearing Pulley with fully covered with nylon cap.• Paint Coating: 2 Coat Mat finished Powder CoatedSystem for long life• Shrouds: Material – fiberglass Fully Covered infront and back side• Adjustable options: Machine can support different height users with counter balanced system.• Handles / Grips: Grips Non-Absorbing PVC compound retained with aluminium end Cup• Adjustment: Thigh and leg pad adjustable for variant users• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Seat adjustment: Front and back Adjustment for variant users’ level of 5 adjustment• machine weight: 240kgs• Product certification: BS EN ISO 20957-2:2021 |
| 42 | Prone Leg CurlTechnical Specifications:• Main Frame Size: 140x50 mm Oval Frame of 3 mm Thickness. Heavy metal bending technology to ensure superior strength & to eliminate joint failure.• Weight Stack: 231Lbs minimum Steel weight Stack with Bushing for smooth workout• Cable: 5mm Steel Wire with PU coating, Tensile Strength of 2200Lbs• Pulley - Fiberglass Reinforced Nylon Bearing Pulley with fully covered with nylon cap.• Paint Coating: 2 Coat Mat finished Powder Coated System for long life• Shrouds: Material – fiberglass Fully Covered in front and back side• Adjustable options: Machine can support different height users with counter balance system• Upholstery: Cushion & Pads made of 2\" High Density foam & 18mm marine plywood, covered with heavy double stitched leatherite rexine.• Handles / Grips: Grips Non-Absorbing PVC compound retained with aluminum end Cup• Adjustment: leg pad adjustment of 8 levels• machine weight: 255kgs• Product certification: BS EN ISO 20957-2:2021• Tolerance of +/- 10% for dimensions and weight for the specifications mentioned above shall be considered. |
| 43 | Plate RackTechnical Specifications:• Minimum maintenance is required for commercial applications.• Tube: Tubing: 2.5*50mm*100mm square tubing, electro-welded to maximum integrity• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement• pre-treatment for superior durability• LXWXH: 89.1x62.8x128.8CM |
| 44 | 20\" Solid Lat BarTechnical Specifications:• Made of solid steel pipe with rubber grips on both ends to ensure superior grip |
| 45 | Nylon Lat RopeTechnical Specifications:• Heavy duty coated nylon rope with solid rubber ends |
| 46 | Kettle Bell DumbbellTechnical Specifications:• High quality Steel kettle bell covered with Hard-wing & impact resistant virgin rubber• Accurate Weight• 2X6, 4X6, 6X6, 8X6, 10X6 & 16X6 |
| 47 | 48\" Hexa BarTechnical Specifications:• 20 Kg Hex bar raised handle– alloy steel• Dimensions: 56x23x2 inches |
| 48 | Rubber Coated fixed Barbells with Straight & Curl BarsTechnical Specifications:• Hexagonal shape• Steel coated with Hard-wing & impact resistant TPU at both ends• Won’t release any smell• accurate weight• Straight 15x2, 20x2, 25x2, 30/2, Curl 10X2, 15x2,20x2 |
| 49 | Barbell RackTechnical Specifications:• Sturdy design• LXWXH – 125x84x149 cm |
| 50 | 7.2 ft Olympic BarTechnical Specifications:• 20 Kg Olympic Rod with 6 Brass Needle Bearing to ensure free movement.• 50 mm sleeves & 28 mm centered rod with knurling to ensure superior grip |
| 51 | 6.6 ft Olympic BarTechnical Specifications:• 15 Kg Olympic Rod with 6 Brass Bearing to ensure free movement.• 50 mm sleeves & 25 mm centered rod with knurling to ensure superior grip |
| 52 | 5.6 ft Olympic BarTechnical Specifications:• 10 Kg – 5.6 ft (Length) with 50mm sleeves & 25mm centered rod with knurling to ensure superior grip |
| 53 | Aerobic StepperTechnical Specifications:• 3 Step adjustable height Made of unbreakable fiber |
| 54 | Flowing Board/ Balance BoardTechnical Specifications:• Heavy duty construction• Proper equipment for balance workout |
| 55 | Rowing ErgometerTechnical Specifications:• Resistance Type: Variable resistance options, including air, magnetic, or water, for a customizable workout experience.• Dimensions: Compact and space-Saving.Weight Capacity: High weight capacity, typically around 300 pounds (136 kg) or more, to accommodate users of various sizes.• Frame Material: Sturdy and durable steel or aluminum frame for stability and longevity.• Monitor/Console: Advanced LCD or LED display with clear visibility, showing key metrics like time, distance, strokes, calories burned, heart rate, and more. Compatibility with fitness apps and wireless heart rate monitoring is a plus.• Seat and Rail: Comfortable, ergonomically designed seat with a smooth-sliding rail system for consistent and fluid motion.• Footrests: Adjustable and secure footrests with straps to accommodate different foot sizes and positions.• Handlebar: Ergonomic handlebar with a comfortable grip, designed to minimize strain on wrists and hands.• Programs: Pre-programmed workouts and the ability to create custom workouts based on fitness goals.• Noise Level: Quiet operation, suitable for use in shared spaces or apartments.• Warranty: A substantial manufacturer\"s warranty, typically covering frame, parts, and labor, with a duration of at least one to three years. |
