|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 0 - 100 m.All kinds of soil. |
| 2 | upto 1.5m depth |
| 3 | from 1.5 m upto 3.0 m depth |
| 4 | Bailing of water from the excavated earthfor column foundation by engaging suitable capacity of motor pump with delivery pipe line and to ensure no water stagnation during pouring of concrete etc including all labour, tools, tackles,equipment, fuel, etc, complete. |
| 5 | Providing and injecting chemical emulsions for pre-construction and stage wise construction anti-termite treatment ,creating a chemical barrier as per IS 6313 ( Part-2) in column footing, plinth beam, foundation basement and back filling the earth in stages as filling proceeds , top surfaces ofplinth filling, junction of wall and floor along external perimeter of the buildings all complete as per specification and as directed includingthe cost of labour,materials , equipments etc., complete. |
| 6 | Supplying and filling in Quarry dustto below the levelling coarse concrete for isolated foundations and basement filling on the building andwherever requiered below the Floor finish level and filling in layer not exceeding 150 mm thick including well watered and compacting levelling etc complete and as directed at site including all labour, tools , tackles, equipment, plants fuel,etc complete. |
| 7 | Re-filling availing excavated earth ( excludingrock ) in sides offoundations etc., in layer not exceeding 20 cm depth, consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m and as directed at site including all labour, tools, tackles, equipment, fuel,etc complete. |
| 8 | Providing and laying Cement Concrete (PCC) 1:4:8 (1 Cement : 4 Fine Aggregate : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding centering and shuttering all complete as per specification and as directed includingthe cost of labour, materials, tools, equipment, etc complete. |
| 9 | Providing Centering and shuttering including strutting, propping etc. and removal of form for sides and soffits including necessary supports and strutting upto 3.50mheight for plane surface as below in all floors with all cross bracings using MS Sheetsand Angles andspaced silver oak joists andsupported by casurina props complete in all floors, stairs includings all complete as per specification and as directed includingthe cost of labour, materials, tools, equipment, etc complete. |
| 10 | Foundations, footings, bases of columns, etc. for massconcrete |
| 11 | Suspended floors, roofs, landings, balconies and accessplatform |
| 12 | Lintels, beams, plinth beams, girders, bressumers andcantilevers |
| 13 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 14 | Providing and laying in position, standardised Concrete Mix M-30 Grade in accordance using with IS 456- 2000, with minimum cement content 350 kg and 20 mm and down graded BGSmetal for all RCC items of works including laying, pumping, vibrating with mechanical vibrators , finishing, curing etc all complete as per specification and as directed includingthe cost of labour, materials, tools, equipment, Scaffolding etc complete. |
| 15 | All works up to plinth level |
| 16 | All works from Plinth level upto Floor V Level |
| 17 | Steel reinforcement for all R.C.C. works including straightening, cutting,bending, placing in position and binding all complete by using Thermo-Mechanically Treated bars of grade Fe-500Dincluding all labour, materials, tools, equipment, binding wire etc., complete. |
| 18 | Brick work with common burnt clay bricks of class designation 5 in in Foundation and Plinth in all shapes and sizes: Cement mortar 1:6 (1 cement : 6 Fine Aggregate) including all labour materials, tools, equipments, etc. Complete. |
| 19 | Brick work with common burnt clay bricks of class designation 5 insuperstructure above plinth level up to floor V level in all shapes and sizes: Cement mortar 1:6 (1 cement : 6 Fine Aggregate)including all labour materials, tools, equipments, Scaffolding, etc. Complete. |
| 20 | Half Brick work with common burnt clay brick of class designation 5 in cement mortar 1:3 (1 cement : 3 Fine Aggregate) in superstructure above plinth level andupto floor five level including all labour materials, tools, equipments, Scaffolding, etc. Complete. |
| 21 | Proving ceiling plasteringthe exposed surface of RCC items of works such as roof slab,beams, sunshade ,stair case slab, with CM 1:3 (1 cement : 3 Fine Aggregate)- 6 to 10 mm thick ,including finishing neatly curing etc., including all labour, materials, tools, equipment, scaffolding, etc., complete |
| 22 | Plastering using CM 1:4 (1 cement : 4 Fine Aggregate) -12 to 15mm thick to inner and outer wall surfaces including finishing neatly curing etc., complete including all labour, materials, tools, equipment, scaffolding, etc., complete |
| 23 | Providing and laying water proofing treatment in sunken portion ofWCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. Thislayer will be allowed to air cure for 4 hours.(b)Second layer of slurry of cement @ 0.242 kg/sqm mixedwith water proofing cement compound @ 0.126 kg/sqm. Thislayer will be allowed to air cure for 4 hours followed with watercuring for 48 hours.The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixedslurry. The work is including all labour, materials, tools, equipment, scaffolding, etc., complete. |
| 24 | Providing weathering course for roof slab (with brick jelly lime concrete to an average thickness of 75 mm laid to necessary falls and slope with 20 mm nominal size brick aggregate and 50% lime mortar 1:2 (1 Lime putty: 2 Surkhi) rammed and finished with gur and belgiri treatment complete including rounding off junctions of roof slab with parapet wall with lime concrete all as per the specifications and as directed at site of works including curing all labour, materials, tools, equipments, transport, fuel etc., complete. |
| 25 | Cement concrete flooring 1:2:4 (1 Cement : 2 Fine Aggregate : 4 graded stone aggregate ) 40 mm thick with 20 mm nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete as per relevant specification and as directed including all materials, labour,tools, plants, equipments, fuel, etc.complete |
| 26 | Supplying and laying one course of pressed tiles of with thickness not less than 20 mm or nearest available thickness in the market and set in C.M. 1:3 (1 cement: 3 Fine Aggregate) 12mm thick mixed with 2% of integral water proofing compound by weight of cement including pointing the joints of tiles with cement mortar 1:3added with WPC and finished neatly all as per relevant specification and as directed including all materials, labour,tools, plants, equipments, fuel, etc. complete. |
| 27 | Providing and laying brick jellycement concrete of mix 1:3:6 (1 Cement: 3 Fine Aggregate: 6hard granite graded stone aggregate of 20 mm nominal size) in volumetric proportions for sunken portion for toiletand other such works wherever required all as per relevant specification, drawings and as directed including mixing, transporting, placing, ramming, consolidating, curing etc., including all materials, labour,tools, plants, equipments, fuel, etc. complete. |
| 28 | Providing and laying Vitrified tiles of Size 600mm x 600mm in floor in different sizes of minimum thickness 8mm of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 Fine Aggregate) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., all as per relevant specification and as directed including all materials, labour,tools, plants, equipments, fuel, etc. complete. |
| 29 | Providing and laying Ceramic glazed Floor tiles for walls and dadooing in toiletsof size 300x300 mm or nearest size avaialble in the market of minimum thickness 6mm of approved make, in all colours, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Fine Aggregate), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement added with pigment to match the colour of the tiles, curing all as per relevant specification and as directed including all materials, labour, tools, equipments etc., complete |
| 30 | Providing Eurocon tile20 mm (average ) thickforflooring over base laid and jointed with grey cement slurry mixed with pigment to match the shade Base with cement mortar 1:3 (1 cement: 3 Fine Aggregate ) 20mm thick wherever requiredand jointed with grey cement slurry mixed with pigment to match the shade of the tiles all as per relevant specification and as directed including all materials, labour, tools, equipments etc., complete |
| 31 | Providing Eurocontile 20 mm (average ) thick in risers and treads of steps skirting dado and pillars laid on 12mm (average thick cement morter 1:3 (1 cement: 3 Fine Aggregate) and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete where ever required all as per relevant specification and as directed including all materials, labour, tools, equipments etc., complete. |
| 32 | Providing and fixing in position First class country wood (padauk)wrought main frames for door frames with necessary M.S. hold fasts / clamps fixed suitably to the masonry / concrete including cutting pockets and grouting with P.C.C. 1:3:6 (1 cement : 3 Fine Aggregate : 6 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions, curing including painting with one coat of boiling coal tar paint on the portions of the timber abutting against masonry / concrete and as directed including all materials, labour, tools, equipments etc., complete. |
| 33 | Providing and fixing ISI marked flush door shutters conforming to non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws and as directed including all materials, labour, tools, equipments etc., complete. |
| 34 | Providing and fixing factory made panel 30 mm thick plain PVC door shutters consisting of frame made out ofM.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness,70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shallbe flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading oninner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVCstrip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s speciication& drawing and as directed including all materials, labour, tools, equipments etc., complete. |
| 35 | Providing and fixing factory made uPVC white colour glazed windows comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. |
| 36 | Sliding glazed window |
| 37 | Fixed glazed window |
| 38 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary butt hinges and screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge - Second class teak wood - 30 mm thick shutters including all labour, materials ,tools, equipments etc., all complete. |
| 39 | Providing and fixing M.S. grills of required pattern in frames of windows/openings etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames or wherever required with rawl plugs screws etc.and where ever required and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 40 | Providing and fixing steel work welded in bulit up sections/framed work including cutting, hoisting, fixingin position and applyingpriming coat of approved steel primer etc. for HandRailsand wherever required all as directedincluding all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid including all materials, labour, tools, transport, etc., complete. |
| 42 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin 430x260x350mm or 340x410x265mm sizes respectively and as directed including all materials, labour, tools, transport, etc., complete. |
| 43 | Providing and fixing white vitreous china Wash basin size 550x400mm or nearest size available in market with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required with a pair of 15 mm C.P. brass pillar taps including all materials, labour, tools, transport, etc., complete. |
| 44 | Providing and fixing Stainless Steel A ISI 304 (18/8)Kitchen sink with drain board 510x1040 mm bowl depth 250 mm or nearest available size in the market with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required including all materials, labour, tools, transport, etc., complete. |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 46 | 20 mm nominal dia Pipes ( Concealed work, including cutting chases and making good the walls etc.) |
| 47 | 25 mm nominal dia Pipes(Internal / External work - Exposed on wall) |
| 48 | 32 mm nominal dia Pipes(Internal / External work - Exposed on wall) |
| 49 | Providing and fixing in position approvedquality rigid PVC pipe for drainage works below GL of approved makeincluding bends, specials, etc., including earth work excavation, refilling making connection to gully trap/manhole/septic tank and jointing the pipes withspecials using necessary adhesives allas directed at site including all labour, materials, tools, equipments, etc., complete |
| 50 | 110mm dia PVC pipe of 6Kgf/sq.cm |
| 51 | 75mm dia PVC pipe of 6Kgf/sq.cm |
| 52 | 110mm dia PVC pipe of 6Kgf/sq.cm - Rain Water Pipe |
| 53 | Providing and fixing in position PVC Nahani trap (floor trap) 110mm dia with gratings as available in the market suitable for PVC pipe and embedding the trap in the floor slab of concrete with suitable gradient making the joints water tight etc., all as directed at site of work including curing, all labour, materials, tools, equipments etc., complete. |
| 54 | Supplying and fixing in position of 15 mm dia C.P bib cock including all labour, materials, tools, equipments etc., complete. |
| 55 | Providing and fixing approved quality SS Health Faucet in the toiletall as per manufacturer’s specification and as directed including all labour, materials, tools, equipments, etc., complete. |
| 56 | Supplying and fixing CP grating of 6 mm thick with rim- 75 mm dia all as per manufacturer’s specification and as directed including all labour, materials, tools, equipments, etc., complete. |
| 57 | Providing and fixing gate valve of approved quality (screwed end) all as per manufacturer’s specification and as directed including all labour, materials, tools, equipments, etc., complete. |
| 58 | 32 mm nominal bore |
| 59 | 25 mm nominal bore |
| 60 | 50 mm nominal bore |
| 61 | Supplyingand fixing on wall, face mirror of size 600x450mm (approx) beveled edge mirror with plywood/ hard board back of approved quality as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 62 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type with With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 63 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as directed at site of work including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 64 | Painting the Ceiling with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 65 | Painting the walls with two coats of premium acrylic emulsion paint of interior grade with two coatshaving VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 66 | Applying with two coats of wall painting withAcrylic Smooth exterior paint over one coat of approved exterior primer of required shade including and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 67 | Painting with two coats of synthetic enamel paint over one coat of wooden primer for wooden surfaces of approved brand and manufacture of required colour to give an even shade of approved brand and manufacture and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 68 | Painting with two coats of Epoxy paint for Steel surfaces of approved brand and manufacture of required colour to give an even shade of approved brand and manufacture and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 69 | Providing and fixing door fittings with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 70 | Providing and fixing bright finished brass tower bolts (barrel type) of size 250x10 mm with necessary screws etc. complete including all materials, labour, tools, equipments, etc., complete |
| 71 | Providing and fixing bright finished brass door latch of size 250x16x5 mm with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 72 | Providing and fixing chromium plated brass handles 125mm long with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 73 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. and as directed complete including all materials, labour, tools, equipments, etc., complete. |
| 74 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 75 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 Fine Aggregate) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine Aggregate : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 Fine Aggregate : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 Fine Aggregate), finished smooth with a floatingcoat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets With common burnt clay bricks of class designation 5 including all labours, materials, scaffolding, tools etc., complete |
| 76 | Supplying and fixing of pre-cast RCC well ring- 1.20m dia x 0.30m height for soak pit to be provided below the ground level and soak pit to be covered with RCC cover slab of minimum thickness 75mm and as directed including all labours, materials, scaffolding, tools, transport etc., complete |
| 77 | Constructing Soak Pitfor \"Rain Water Harvesting\" madeup of RCC Well Ring to suit the site condition and filled with 40mm, 20mm Pebbles with Fine Aggregate and other filter materials if any required as directed at the site including all materials, labour, tools, equipments, etc., complete. |
| 78 | Providing and fixinghigh density PVC water storage tank of 2000 Litres capacity of Sintex / Equivalent brand required with 3 layers as per site condition with cover as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.and as directed including all materials, labour, tools, equipments, etc., complete. |
| 79 | Providing and layingPVC conduict laid over roof slab (Ground & First floor) as required and as per technical specification and as per latest IS / IES. |
| 80 | Providing and fixingPVC Junction box as required and as per technical specification and as per latest IS / IES. |
| 81 | PVC - 1 way junction box |
| 82 | PVC - 2 way junction box |
| 83 | PVC - 3 way junction box |
| 84 | PVC - 4 way junction box |
| 85 | Supplying and fixing 5HP Single phase Pump motor with bed arrangement and with necessary Starter, fittings including required wiring with earthing pit as directed at site and as per technical specification and as per latest IS / IES. |
| 86 | Engaging document controller (Clerk) during the exection period (12 months Construction + 3 months Post Construction) |
