Bharat Sanchar Nigam Limited-BSNL has published Tender For Civil Work. Submission Date for this Tender is 08-02-2024. Flame Detectors Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SH.MODULAR PARTITION & WORK STATIONS - HNI OR EQUIVALENT MAKE Providing, Supplying and assembling HNI or equivalent make Full Height partition of minimum 75mm thickness and should have clear space of 45-55 mm for electrical wiring. The height of partition should be 2185mm (approx). All metallic parts shall undergo a 7 stage anti rust treatment and shall be powder coated in suede finish to a thickness of minimum 45 microns. The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from engineer-in-charge. Partition consist of following items: |
| 2 | (a) Modular Partition-The modular partitions shall not be grouted in the floors. The modular partitions shall be an assembly of the following parts:- |
| 3 | (b) Levellers-Each frame shall be provided with two 10mm levelling bolts which allow 15mm adjustment for floor unevenness. The levellers shall be concealed inside the skirting and shall be completely retracted inside the skirting in case of uniformly flat floors. |
| 4 | (c ) Wall start (Optional)- This is a joinery, which is used to fix partition with wall. The section is made of 75mm (W)x 75/50mm(D) CRCA Steel. This should have necessary slots for fixing and can take wire from wall to partition. |
| 5 | (d) Frames shall form the basic support structure for all components and shall be of 75mm x 35mm aluminium sections. The main vertical member of the frame bearing the load of brackets and storages shall be made of 1.2mm thick aluminium sections.The connecting vertical face shall be made up of 0.8-1mm thick aluminium sections. The horizontal members shall be made of 0.8mm aluminium extrusions. Each individual module shall not be more than 700mm in height and shall not be more than 1200mm in width.Frames can have 1-3 modules in prefabricated form. Additional height shall be achieved by mounting modules over them. The bottom module shall be mounted over a skirting of more than 85mm height. The skirting shall be designed so that switches can be provided on the skirting level. The Base Beam (Skirting Inner Sections) shall be made of CRCA Steel. |
| 6 | (e) The all main supporting vertical member of size 75mmX35mmX1.2mm of aluminium section should be extended up to building ceiling/beam bottom by fixing the same with aluminium cleat with dash hold fasteners for rigidity of partition as well as for fixing gypsum board drop wall above partition complete as per direction of Engineer in Charge(Cost of main vertical members extended up to ceiling height is includes in basic item no extra payment admissible) |
| 7 | (f) The skirting shall be snap fitted on both sides with Skirting Plates made of 0.6mm thick aluminium extrusions. Wherever switches are provided on the skirting, the skirting plates shall have the necessary slots (Optional/As per Requirement). |
| 8 | (g) Frame Gasket- Frame modules shall have PVC foam Gaskets of 4mm thickness and 10mm width pasted with PVA glue along the inner periphery on both sides to prevent sound and dust transmission through the tiles. The frames shall also have 2mm x 10mm foam gaskets pasted with PVA glue on the outer periphery so as to seal the gaps between the adjacent frames. |
| 9 | (h) Ceiling Rail-The telescopic ceiling rails shall be made of CRCA Steel of 75mm Cross section with 0.7mm thickness.The height of the ceiling rail shall be of 50mm thick.The ceiling rail should allow an height adjustment of 10mm to 15mm upwards. |
| 10 | (i) Posts-The frames shall be connected at the junctions by CRCA Steel connectors. The Junction of frames shall be snap fitted with square Posts. The Posts shall be made of CRCA Steel of1.6mm thickness of section 75mm x 75mm for 2-Way & 75mm x 15mm for 3-Way. |
| 11 | (j) Trims-The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminium extrusions of 1mm thickness and 75mm width in a Curvature of 12mm. |
| 12 | (k) Wire Management- (i) Slots shall be provided on Skirting/Tiles/Partition to fix all electrical & data points as per Requirement. |
| 13 | (l) Tile Finish:- |
| 14 | (m) 1st Modules in Steel Powder Coated Embossed finish, 2nd, 3rd Module in laminated Finish and 4th & 5th Modules in Plain Glass Finish for Front Door Side Partitions. |
| 15 | (n) 1st Modules in Steel Powder Coated Embossed Finish,2nd Module in Pinup/Marker/Laminated Finish ,3rd Module in Laminated Finish ,4th & 5th in Plain Glass for Side/dividing partition. |
| 16 | (o) LAMINATED TILES: Laminated tiles shall be made of 8-10mm MDF (Medium Density Fibre Board) with 0.6-0.8mm Post Lamination on both sides of the tile. |
| 17 | (p) FABRIC TILES: The fabric tiles shall be made of 8-10mm MDF with (PREMIUM) fabric as per Arch. Drawings. It should be possible to replace the fabric by peeling it off. |
| 18 | (q) MAGNETIC PINUP TILES: The Pinup tiles shall be made of 0.6mm Galvanised Iron (GI) sheet with premium fabric. It should be possible to replace the fabric by peeling it off. |
| 19 | (r) GLASS TILE- Glass Tiles shall be 4 mm clear toughened glass with Film are supplied and fixed from both side with all necessary interior trims and gaskets. There are two glass tiles that can be fitted and are completely interchangeable with regular tiles. |
| 20 | Providing and fixing Plain Glass Door-Glass Door with Shutters in the full height partition made of 12mm thick Toughened Glass including locking arrangement, Handles with Floor Spring all complete as per direction of Engineer-In-Charge & as per architectural drawing. |
| 21 | Providing and fixing Laminate Door-Laminate Door with Shutters in the full height partition made of 38mm thick Honey Comb with both side lamination with PVC lipping including locking arrangement, Handles with Door Closure, Stopper, Hinge all complete as per direction of Engineer-In-Charge & as per architectural drawing.. |
| 22 | MODULAR CABIN/CUBICLE WORKSTATION (WITH/WITHOUT PARTITION) of make HNI or equivalent - Providing, Supplying and assembling Table of size as specified below. Worktop made of 25mm thick POST LAMINATED with 1mm thick laminate on particle board of approved shade. The working and non–working edges shall be provided with hotpressed 0.8-1.2mm thick PVC (Poly Vinyl Chloride) edging using special hot melt glue at high temperature. Table Top Under structure consists of CRCA Steel Powder Coated Brackets, 18mm thick Prelam Modesty Panels, 25mm thick Prelam Gable Ends and by CRCA Steel Powder Coated Legs. Low Height partition of minimum 75mm thickness and should have clear space of 45-55 mm for electrical wiring. The height of partition should be 1660 mm in Three Module Frame Configuration. All metallic parts shall undergo a 7 stage anti rust treatment and shall be powder coated in suede finish to a thickness of minimum 45 microns. Tile Finishes-1st Modules in Steel Powder Coated Perforated finish and 2nd Modules in Laminate/Fabric/Pinup/Marker Finish & 3rd Module-Frosted Glass/Laminate. |
| 23 | The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from engineer in charge STRAIGHT WS SIZE-1200mm x 600mm for Each User (Without Partition) |
| 24 | STRAIGHT WS SIZE from -900mm to1050mm x 600mm for Each User (Without Partition) |
| 25 | STRAIGHT WS SIZE-1200mm x 600mm for Each User.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision & With One Pinup for Each User. |
| 26 | STRAIGHT WS SIZE- from 900 mm to1050mm x 600mm for Each User. (MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision & With One Pinup for Each User. |
| 27 | Main Table of size 1800mm x 750mm x 730mm H with Return Table of 1500mm x 450mm x 730mm H (Without Partition) |
| 28 | Main Table of size 1800mm x 750mm x 730mm H with Return Table of 1500mm x 450mm x 730mmH.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision)(With One Pinup, One Marker for Each User) |
| 29 | STRAIGHT WS SIZE-from 1050mm to1200mm x 600mm for Each User.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision)(With One Pinup for Each User)(With Divider 75mm Thick & 1660 H Partition) |
| 30 | CUBICLE WS EACH SIZE-Main Table of size 1800mm x 750mm x 730mm H with Return Table of 1200mm x 450mm x 730mmH (Without Partition) |
| 31 | STRAIGHT WS SIZE- from 550mm to 600mm x 600mm for Each User.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision)(With One Pinup for Each User)(With Divider 75mm Thick & 1660 H Partition) |
| 32 | STRAIGHT WS SIZE- from 900mm to 1050mm x 600mm for Each User.(MOUNTED ON 75mm Thick Element FRAME-1660 H, With Electrical Provision)(With One Pinup for Each User) |
| 33 | Providing, SupplyingandassemblingPINNACLE TABLE of make HNI or equivalenthaving- |
| 34 | (a) Worktop made of 25mm thick Particle Board POST LAMINATED with 1 mm thick laminate of approved shade and with 2mm thick PVC lipping of matching shade. Under structure: 18mm thick Modesty panel and 25mm thick Gable ends with Post laminated Particle Board with 1 mm thick laminate of approved shade and 2mm thick PVC Lipping of matching shade. Main Table of Size:2100 mm x 800 to 850 mm with side unit of size:1200 mm x450 mmx750mm H with Storage underneath made of 18mm thick PLPB with 2mm thick PVC lipping of matching shade. Back unit of size:1500 mm x450 mmx 750 mm H with Storage 750mm L underneath made of 18mm thick PLPB with 2mm thick PVC lipping of matching shade.The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from engineer- in-charge |
| 35 | Providing, SupplyingandassemblingOVERHEAD HAMPERS of make HNI or equivalent – Providing / Supplying Over Head Hampers made of CRCA Steel with Powder Coating with Slide up Doors/Hinge Shutters.The inside Bin is provided with 2 Nos. of Divider Flaps with locking arrangement complete, to be mounted over Element Partitions only.The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from Engineer-in-charge |
| 36 | SIZE- from 600 to 900mm(L) x 300mm(D) x 450mm(H) |
| 37 | SIZE- from 1050mm to 1200mm(L) x 300mm(D) x 450mm(H) |
| 38 | Providing, SupplyingandassemblingACCESSORIES of make HNI or equivalent – |
| 39 | Keyboard pull out trayofmade of0.8mm thick CRCA steel duly powder coated, of minimum thickness 45micron, with metallic roller slides on both sides on Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws. The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from engineer-in-charge |
| 40 | Three 3-drawer unit shall be of size 455mm (L)x560mm (D)x680mm(H) on levellors made of 0.8-2mm thick CRCA body andfascia duly powder coated of minimum thickness 45micron. The drawer unit shall consist of two drawers and one filing box mounted on roller slides on both sides. It shall be provided with central lock mechanism with keys and flush handles are to be providedin front to facilitate opening and closing of drawers.The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from Engineer-in-charge. |
| 41 | Three 3-drawer unit shall be of size 455mm (L)x560mm (D)x680mm(H) , Model no. EBBFA47 of make HNI or equivalent on levellors made of 0.8-2mm thick CRCA body andfascia duly powder coated of minimum thickness 45micron. The drawer unit shall consist of two drawers and one filing box mounted on roller slides on both sides. It shall be provided with central lock mechanism with keys and flush handles are to be providedin front to facilitate opening and closing of drawers.Drawers shall be provided with Top supporting brackets made of CRCA steel duly powder coated. The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from Engineer-in-charge. |
| 42 | Pedastal unit- Three 3-drawer unit shall be of size 390mm(L)x450mm(D)x680mm(H) on levellers /Castors made of 0.8-2mm thick CRCA body andfascia duly powder coated of minimum thickness 45micron. The drawer unit shall consist of two drawers and one filing box mounted on roller slides on both sides. It shall be provided with central lock mechanism with keys and flush handles are to be providedin front to facilitate opening and closing of drawers.The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from Engineer-in-charge. |
| 43 | Providing, SupplyingandassemblingSTORAGE CABINETS of make HNI or equivalent as detailed below : |
| 44 | Providing & Supplying hinged door Free standing cabinet units resting on floor having door, top, sides, back, & shelves in CRCA powder coated steel. The body and Shelves of the cabinets shall be made of 0.8-1mm CRCA steel.The top of the cabinets shall be made of 1.2mm thick CRCA steel and the skirting plate shall be made of 1mm CRCA steel. The cabinet shall be provided with Lever CAM Locks. The handles shall be PVC Moulded and shall be flush fitted. The cabinets shall be provided with 4 Nos. M10 levelers for height adjustment upto 10-15mm.The shutters shall have self-closing hinges.The item shall be as per manufacturer specifications all complete. The work shall be carried out as per guidance and instructions received from Engineer-in-chargeSIZE-600mm(L) x 450mm(D) x 1660mm(H) |
| 45 | Providing and fixing 12.5 mm thick gypsum board for making drop wall of 75 mm thick above BP Ergo partition. Gypsum board should be fixed on frame work of aluminium section by screws and aluminium cleats complete item i/c jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm on both side joint as per manufacturers specifications i/c necessary cut outs if required (Aluminium section for frame work should be paid in basic item). |
| 46 | 12.5 mm thick tapered edge gypsum fire resistant board confirming to IS: 2095-Part-I |
| 47 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 48 | For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 49 | Providing and fixing gypsum ultra ceiling section power pressed of M.S. sheet and galvanised of size 80x26x0.5mm thick of approved make for proper fixing of gypsum board as direction of engineer-in-charge. |
| 50 | Providing and fixing of M.S power pressed anglehaving thickness 0.5mm flange of 10mm and 25mm of approved make for fixing of drop wall including necessary screws, as per direction of engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
