Public Works Department-PWD has published Tender For Construction Of Junior Engineer Office Cum Residence At Uhal Distt. Hamirpur. Submission Date for this Tender is 03-02-2024. Building Work Tenders in Hamirpur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m(one point five metre) in width or 10 sqm(ten square metre) on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m(one point five metre), including getting out the excavated soil and disposal of surplus excavated soils as directed, within all leads of 50m(fifty metre) (Ordinary rock) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 2 | Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical menus including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling /wedging out of rock (where blasting is prohibited) and other intermediate classification of soil setting out true to the required line, grades width cutting and trimming of side slopes and level as shown on the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 302,1603.1,1603.2 sorting out useful material and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankment for grade improvement and disposal of all un-useful material to required width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means along with its leveling fine dressing and carriage of machineries materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m(one point five metre), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm(twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty metre) Pipes, cables etc. exceeding 80 mm(eighty millimetre) dia. but not exceeding 300 mm(three hundred millimetre) dia as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 5 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm(twenty two point five centimetre) thick at site as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre)nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm(forty millimetre) nominal size)as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm(twenty millimetre) nominal size) All work up to plinth levelas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 9 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg ( one point seven kilogram )per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oilincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 10 | Making plinth protection 50mm (fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimetre) nominal size) over 75mm(seventy five millimetre) thick bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level design mix M-20 (M-twenty) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 12 | Providing and laying in position specified grade of Reinforced cement concrete work with design mix M-25 (M-twenty five) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level, excluding cost of centering, shuttering, finishing and reinforcement as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 13 | Providing and laying in position specified grade of Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level, excluding the cost of centering, shuttering, finishing and reinforcement with design mix M-25 (M-twenty five) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications Foundations, footings, bases for columns as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 15 | Walls(any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 16 | Suspended floors, roofs, landings, balconies and access plat form |
| 17 | Shelve (In cast Situ) |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Columns, piers, abutments, pillars, posts and struts |
| 20 | Stairs, (excluding landings) except spiral-staircases |
| 21 | Small lintels not exceeding 1.5m(one point five metre) clear Span, mouldings, window cills etc. |
| 22 | Edges of slab and break in floors and walls under 20cm(twenty centimetre) wide |
| 23 | Chajjas |
| 24 | Steel reinforcement (Tata Tiscon/sail make) for Reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo-Mechanically Treated bars of grade Fe-500D or more as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 25 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor all level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 26 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up tofloor all level in cement mortar 1:4 ( one cement : four coarse sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 27 | Providing and fixing 18 mm(eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm(twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm(zero point fifty square metre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 28 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm(one point twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete20 mm(twenty millimetre) dia as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 29 | Providing and fixing 19mm(nineteen millimetre) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 30 | Providing and fixing 19mm(nineteen millimetre) thick Commercial Board in shelves/box for cup board with but joints & fixing with nails & screws etc complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 31 | Providing and fixing 12mm(twelve millimetre) thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 32 | Providing and fixing M.S. grills of (Tata/sailmade) required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to openings /wooden frames with rawl plugs screws etc as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 33 | Providing 40x5 mm(forty into five millimetre) flat iron hold fast 40 cm(forty centimetre) long including fixing to frame with 10 mm(ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm(thirty into ten into fifteen centimetre) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm(twenty millimetre) nominal size) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 34 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 250 mm(one hundred fifty millimetre) weighing not less than 150 gms(one hundred fifty grams) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 35 | Providing and fixing 50 mm(fifty millimetre) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etccomplete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 36 | Providing and fixing 50 mm(fifty millimetre) bright finished brass cup board or wardrobe knob of approved quality with necessary screws as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 37 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg(thirty six kilogram) to 80 kg(eighty kilogram) and door width from 701 mm(seven hundred one millimetre) to 1000 mm(one thousand millimetre), with double speed adjustment with necessary accessories and screws etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 38 | Providing and fixing 300x16 mm(three hundred into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. completeas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 39 | 250x16 mm(two hundred fifty into sixteen millimetre) |
| 40 | Providing and fixing 250x10 mm(two hundred fity into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 41 | 150x10 mm(one hundred fifty into ten millimetre) |
| 42 | Providing and fixing 125 mm(one hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 43 | 100 mm(one hundred millimetre) |
| 44 | 75 mm(seventy five millimetre) |
| 45 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Single rubber stopperas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 46 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete triple strip vertical type as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 47 | Providing and fixing double rebates MS channel iron doors window clerestry window framming manufacturing frame MS section 75x40mm (seventy five into forty millimetre) and MS FLAT 75x5mm(seventy five into five millimetre) and approved rawing including hinges lock jambs beed and if require angle thrash hold of mold steel angle 50x25mm(fifty into twenty five millimetre) welded or rigidly fixed by mechanically means lugs with split and tails to each jambs including steel but hinges 2.5mm(two point five millimetre) thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 48 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3(three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm(thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 49 | Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16 x 3.15 mm(sixteen into three point fifteen millimetre) lugs 10 cm(ten centimetre)long embedded in cement concrete blocks 15 cm x10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6(one cement:three sand:six graded stone aggregate 20mm(twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint steel windows fixed steel windows as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 50 | Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16 x 3.15 mm(sixteen into three point fifteen millimetre) lugs 10 cm(ten centimetre)long embedded in cement concrete blocks 15 cmx10cmx10cm(fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6(one cement:three sand:six graded stone aggregate 20mm(twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paintsteel windows side hung windows as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 51 | Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16 x 3.15 mm(sixteen into three point fifteen millimetre) lugs 10 cm(ten centimetre)long embedded in cement concrete blocks 15 cmx10cmx10cm(fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6(one cement:three sand:six graded stone aggregate 20mm(twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paintsteel ventilators top hung ventilators as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 52 | Providing and fixing wire gauge shutters for steel doors, windows(shtters of standard Z-sections) and other accessories ready made standard steel windows/ventilators with necessry fittings using galvanised M.S. gauge of IS gauge designation 85G(eighty five G) with wire of dia 0.56mm (zero point fifty six millimetre) for doors and windows, as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 53 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in trusses and trussed purlin in building i.e. Rafter purlin in main truss and dormer etc as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 54 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 55 | Providing and fixing MS railing for stair case having balluster of 19mm x 19mm(nineteen millimetre into nineteen millimetre) square bar with a clear height of 85cm(eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mm x 6mm (forty millimetre into six millimetre) size complete with a applying priming coat of red lead paint as per drawing specificationas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 56 | Kota stone slab flooring over 20 mm(twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand)25 mm(twenty five millimetre) thick as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 57 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm(twelve millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 58 | Providing and laying vitrified floor tiles of size 600x600 mm(six hundred into six hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm(twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm(three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etc., complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 59 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm(twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm(three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etc., complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 60 | Providing and fixing 1st quality vitrified floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg(three point three kilogram) per sqm including pointing in white cement mixed with pigment of matching shade complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 61 | White glazed tiles 6mm(six millimetre) thick size 30 x 45cm (thirty into forty five centimetre) in flooring, treads of steps and landing laid on a bed of 12mm(twelve millimetre) cement mortar 1:3(one cement : three sand) finished with flush pointing inn white cement as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 62 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion, Single socketed pipes 110 mm(one hundred ten millimetre) diameter as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 63 | Providing and fixingCoupler 110 mm( one hundred ten millimetre) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 64 | Single pushfit Coupler 110 mm(one hundred ten millimetre) |
| 65 | Bend 87.5°(eighty seven point five degree) 110 mm(one hundred ten millimetre) bend |
| 66 | Providing and fixing 0.60mm(zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5(five) microns primer coating to back coat of polyster of 5(five) microns over 5(five) microns primer coating includingfixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 67 | Providing and fixing ridges or hips 60 cm(sixty centimetre) overall with 0.60mm(zero point sixty millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating + back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm(six millimetre) dia & prepainted G.I. limpet and bitumen washers complete with all accessoriesas required as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 68 | Providing and fixing valley 60 cm(sixty centimetre) overall 0.60mm(zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 69 | Providing and fixing 15 cm(fifteen centimetre) wide 45 cm(forty five centimetre) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm(forty into three millimetre) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design 0.63mm(zero point sixty three millimetre) thick sheet as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 70 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board / facia / soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separtely as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 71 | Providing and fixing 6 mm(six millimetre) thick Cement fiber board as per IS:14862 plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 72 | 15mm(fifteen millimetre) cement plaster in single coat on fair side of brick/concrete/stone walls in pattern upto floor two level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm(eighty millimetre) in girth and finished even and smooth as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 73 | 15 mm(fifteen millimetre) cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement: six fine sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 74 | 6 mm(six millimetre) cement plaster of mix 1:3 (one cement : three fine sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 75 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and level in one coat as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 76 | Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm(three point eighty four kilogram per ten square metre)as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 77 | Distempering with 1st(first) quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre (fifty grams per litre), of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 78 | Providing and applying white cement based putty of average thickness 1 mm(one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 79 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm(zero point ninety litre per ten square metre over an under coat of primer applied @0.75 ltr/10 sqm(zero point seventy five litre per ten square metre) of approved brand and manufacture as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 80 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specificationsPainting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(zero point ninety litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm(zero point eighty litre per ten square metre) of approved brand and manufacture as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 81 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm(forty millimetre) nominal size) all-round S.W. pipes including bed concrete as per standard design 250 mm(two hundred fifty millimetre) diameter S.W. pipe as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 82 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10(ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm(forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 83 | Providing and fixing wash basin with C.I. brackets, 15 mm(fifteen millimetre) C.P. brass pillar taps, 32 mm(thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimetre) with a pair of 15 mm(fifteen millimetre) C.P. brass pillar taps as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 84 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 85 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm(forty millimetre), including painting of fittingsand brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm(five hundred ten into one thousand forty millimetre) bowl depth 250mm(two hundred fifty millimetre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 86 | Providing and fixing 8 mm(eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1(one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 87 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm(thirty two millimetre) dia as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 88 | Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm(six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 89 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimetre)glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm(forty millimetre) long screws, rawl plugs etc., complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 90 | Providing and fixing toilet paper holder C.P. brass as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 91 | Providing and fixing 110mm (one hundred ten millimetre) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 92 | 75mm(seventy five millimetre) dia |
| 93 | Providing and fixing 110mm (one hundred ten millimetre) PVC clamps ISI marked of adhesive design with steel screws and rawl plugs etc complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 94 | 75mm(seventy five millimetre) dia |
| 95 | Providing and fixing 110mm(one hundred ten millimetre) PVC single equal branch with oval access door, ISI markded insertion rubber washer 3mm (three millimetre) tick bolts and nuts complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 96 | 75mm(seventy five millimetre) dia |
| 97 | Providing and fixing 110mm (one hundred ten millimetre) PVC double equal branch ISI marked complete including fixing with approved adhesive etc complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 98 | 75mm(seventy five millimetre) dia |
| 99 | Providing and fixing 110mm (one hundred ten millimetre) PVC door bend with ovalaccess door, insertion rubber washer 3mm(three millimetre) thick bolts and nuts ISI marked complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 100 | 75mm(seventy five millimetre) dia |
| 101 | Providing and fixing 110mm (one hundred ten millimetre) dia PVC collar ISI markedas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 102 | 75mm(seventy five millimetre) dia |
| 103 | Providing and fixing 15 mm(fifteen millimetre ) nominal dia CP Brass Single lever telephonic wall mixer of quality & make as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 104 | Providing and fixing 110mm x 75mm (one hundred ten millimetre into seventy five millilmetre) PVC floor trap ISI marked to self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 105 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm(six hundred millimetre) long towel rail with total length of 645 mm(six hundred forty five millimetre), width 78 mm(seventy eight millimetre) and effective height of 88 mm, weighing not less than 190 gms(one hundred ninety grams) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 106 | Providing and fixing 1216(one thousand two hundred sixteen ) (16 mm(sixteen millimetre) OD) pipe Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C(eighty degree celsius), includingall special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(one point zero zero)metre spacing. This includes the costs of cutting chases and including testing of joints complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 107 | 1620(one thousand six hundred twenty ) (20 mm(twenty millimetre) OD) pipe |
| 108 | Providing and fixing 15 mm(fifteen millimetre) dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 109 | 20 mm(twenty millimetre) dia nominal bore |
| 110 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25(twenty five) to 40 mm(forty millimetre) nominal bore as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 111 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 112 | Providing and fixing20 mm (twenty millimetre) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 113 | 25 mm(twenty five millimetre) nominal bore |
| 114 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm(forty five centimetre) length 15 mm(fifteen millimetre) nominal bore as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 115 | Providing and fixing C.P. brass shower rose with 15 (fifteen) or 20 mm(twenty millimetre) inlet 150 mm(one hundred fifty millimetre) diameter as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 116 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75mm(one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size), includingnecessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm(forty millimetre) nominal size ) and inside plastering with cement mortar 1:3 (one cement :three coarse sand) 12mm(twelve millilmetre) thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5(seven point five) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 117 | Providing and fixing 15 mm(fifteen millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 118 | 20 mm(twenty millimetre) nominal bore |
| 119 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 120 | Providing and fixing 15 mm(fifteen millimetre) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 121 | Providing and fixing 15 mm(fifteen millimetre) nominal boreC.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms(six hundred ninety grams) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 122 | Providing and fixing 15 mm(fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 123 | Providing and fixing PTMT soap Dish Holder having length of 138mm(one hundred thirty eight millimetre), breadth 102mm(one hundred two millimetre), height of 75mm(seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms(one hundred six grams) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 124 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm(forty millimetre) nominal size) all-round S.W. pipes including bed concrete as per standard design 150 mm(one hundred fifty millimetre) diameter S.W. pipe as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 125 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm(twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm(forty millimetre) nominal size), inside plastering 12 mm(twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stoneaggregate 20 mm(twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm(ninety into eighty centimetre) and 45 cm(forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm(five hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg(thirty eight kilogram) (weight of cover 23 kg(twenty three kilogram) and weight of frame 15 kg(fifteen kilogram))With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 126 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etc. complete 250 mm (two hundred fifty millimetre) dia. R.C.C. pipeas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 127 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm(twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement : six coarse sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 128 | Providing and fixing soil, waste and vent pipes 100 mm(one hundred millimetre) dia Sand cast iron S&S pipe as per IS: 1729 as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 129 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion Bend 87.5° (eighty seven point five degree) 110 mm(one hundred ten millimetre) bend as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 130 | Constructing soak pit 1.20x1.20x1.20 m(one point twenty into one point twenty into one point twenty metre) filled with brickbats including S.W. drain pipe 100 mm (one hundred millimetre) diameter and 1.20 m(one point twenty metre) long complete as per standard design as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 131 | Providing and fixing PVC Cowl 110mm (one hundred ten milllimetre) diaas per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 132 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (one Cement : three coarse sand : six graded stone aggregate 20 mm(twenty millimetre) nominal size) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 133 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion, (i) Single socketed pipes 75 mm(seventy five millimetre) diameter as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 134 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualityL D- 2.5(two hundred) Circular shape 450 mm(four hundred fifty millimetre) internal diameter as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 135 | Providing weep holes in brick/stone masonry/ plain/ reinforced concrete abutment, wing walls, return walls, retaining walls with 100mm ( one hundred millimeter) dia PVC pipe De plast /finolex/vectus having pressure 4kg per sqmt (four kilogram) per square meter extending through the full width of the structures with slopes of I(V): 20(H)(twenty ) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
| 136 | Back filling behind return wall, abutmnet wall, retaining wall stone boulders of size range 5cm (five centimetre) to 20cm(twenty centimetre), in the required thickness, for all leads & lifts, all leads & lifts , all complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax,GST or other taxes imposed by the Government. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
