Public Works Department-PWD has published Tender For Civil Work. Submission Date for this Tender is 06-02-2024. Building Work Tenders in thiruvallur Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Renewing and refixing partition of Aluminium natural colour matt finish fixed Partition top half glazed with 5.50mm thick plain glass and bottom half with medium density fibre board of 12mm thick both side pre laminated for cubical and the outer frame of the Aluminium section of size 63.50x38x2.00mm @ 1.121Kg/m. at internal vertical 2 Nos & Horizontal 1 No, mullion of aluminium section of size 62 x 38 xwith necessary aluminium clips of size 17.15 x 17.25 x 1.50mm at 0.176 Kg/m with necessary rubbor beading L angles including dismantling and redoing masonry as concrete where necessary etc., complete.The Aluminium section are to be anodised with matt finish under electrically controlled condition in allfdjsfdslk with ISI 1868 / 1962 specification for an average anodie film thickness of not less than 15 microns.All aluminium sections are should be got approved by Engineer incharge before use on works. |
| 2 | Renewing and refixing in position of Aluminium door of single shutter half glazed and half panelled door with frame made out of box section 101.60 x 44.45 x 3.18mm at 2.319 Kg /m door shutter frame made out of 47.1 x 44.45 x 2.50 mm at 1.202 Kg /m for vertical styles, top and middle and bottom section 100.40 x 44.45 x 2.50 mm at 1.974 Kg /m and using Aluminium clips of size 17.15 x 17.27 x 1.50 mm at 0.176 Kg /m full handle section of size 100 x 30 x 1.60mm at 0.988 Kg/m on both sides, with necessay metal screws, rubber beading, PVC felts, Alu.hinges, tower bolts, automatic door closure, lock, 5.50mm thick plain glass of required size and both sides prelaminated MDF board 12mm thick for panel portion including cost of all materials, labour, power consumption required for fabrication, drilling holes in RCC column, floor slabs, masonry walls where ever necessary with power drills to the required extent and make to the original condition after fixing and as directed. All the aluminium sections are to be anodized with matt finish under electrically controlled condition in accordance with IS 1868/1962 of anodic thickness of not less than 15 Microns All aluminium sections and furniture fittingsshould be got approved by the Engineer-in-charge before use on works. |
| 3 | Single Leaf |
| 4 | Renewing the damaged screen rod with new screen rod, brackets and including labour charges.etccomplete complying with standard specification and as directed by departmental officers. |
| 5 | Renewing the damagedscreen cloth with new screen cloth and including labour charges for stitching, conveyance charges, etccomplete complying with standard specification and as directed by departmental officers. |
| 6 | Repainting two coats of old plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour without primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 7 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 8 | Renewing, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) |
| 9 | 20mm diaAGL (IWS) |
| 10 | 25mm diaAGL (IWS) |
| 11 | Renewing and replacing the damaged GI special with new GI specialsof heavy type of approved quality and good variety of various sizes excluding fixing charges, but including cutting and threading of pipes painting two coats synthetic eamel paint of over one coat of priming coat for the GI specials in case of pipeline above ground level and one coat of tar in case of pipe line below ground level for both internal and external water supply arrangements as directed by the departmental officers etc., complete complying with standard specification. GI specials should be got approved by the departmental officers before use on work. |
| 12 | 25mm dia Elbow |
| 13 | 20mm dia Elbow |
| 14 | 25mm dia Union |
| 15 | 20mm dia Union |
| 16 | Renewing and refixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc, complete complying with standard specifications and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on works). |
| 17 | Renewing and refixing in position best quality and approved make Stainless Steel Sink of size 600mm x 450mm x 200mm with 32mm dia "B" class G.I. waste water pipe & 32mm dia C.P. waste coupling etc., complete complying with standard specification and as directed by the departmental officers. |
| 18 | Renewing the damaged drinking water purifier system with the following specification and as for the ISI standards. The purifier should have the reverse osmosis system with goods quality reverse osmosis rememberance with 10 litre tank capacity with necessary pipe line connection the rate inclusive of cost of the system instruction and transportation charges and all other incidental charges etc., complete as directed by the department officers. |
| 19 | Renewing the damaged Gun metal Gate Valve /Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc, complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on workshall be got approved by the Executive Engineer before use on works |
| 20 | 25mm dia Gate valve |
| 21 | SUB TOTAL |
| 22 | GST @ 18 % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
