Tender For Construction Of Veterinary Hospital Building At Jharag Nakrari Tehsil Jubbal Sh Co Balance Work Of Building, jubbal-Himachal Pradesh

Construction Of Veterinary Hospital Building At Jharag Nakrari Tehsil Jubbal Sh Co Balance Work Of Building Co Veterinary Hospital Building At Jharag Nakrari Tehsil Jubbal Sh Co Balance Work Of Building , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws And 4 Mm Glass Panes Glaze All Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing 12 Mm ( Twelve Millimeter ) Thick Coir Veneer Board ( Conforming To Is 14842 ) Panneled Or Panelled And Glazed Shutters For Doors With Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Within All Leads And Lift Of Materials And Other Incidentals All Complete As Per Direction Of Engineer-In-Charge. , Supplying And Fixing Glass Panes With Putty And Nails Plain Glass 4 Mm Thick , 300 X 16 Mm Size , 250 X 16 Mm Size. , 250X10mm , 150 X 10 Mm Size. , 125 Mm Size , 75 Mm Size. , Providing And Fixing Aluminium Door Stoper With Rubber Cushion 100Mm Within All Leads And Lfits , Proviidng And Fixing Brigh Finished M.S.Hooks And Eyes 10Mm Within All Leads And Lifts As Per Directions Of Engineer In Charge , Providing And Fixing Square Edges Cover Fillets ( Beading ) 19 X 6 Mm Section I / C Mitring At Junctions With Wood Screws And Nails Complete. In 1St. Class D / Wood Including Carriage Of All Labour Equipment And Material To Various Location Through All Modes Within All Leads And Lifts , Kota Stone Slab Mirror Polised / Uniform Colour Flooring 20Mm ( Average ) Thick Base Of Cement Mortor 1:4 ( 1 Cement :4 Sand ) Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete 19 Mm Thick Mirror Polishedslab Size Not Less Than 550Mmx550mm Including Carriage Of Materials Within All Leads And Lifts As Per Directions Of Engineer In Charges , Kota Stone Slab 19Mm Thick Mirror Polished Of Slab Size Not Less Than 550Mmx550mm In Risers Of Steps, Skirting Dado And Pillars Laid On 12 Mm ( Average ) Thick Cement Mortar 1:3 ( 1 Cement :3 Sand ) And Jointed With Grey Cement Slurryfixed With Pigment To Match The Shade Of The Slabs Including Rubbing And Polishing Completeincluding Carriage Of Material Within All Leads And Lifts As Per Directions Of Engineer In Charges. , Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified B The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is :15622 Of Approved Make In Al Colours And Shade, Laid On 20 Mm Thick Bcement Concrete Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Jointing With Gre Cement Slurry @ 3.3 Kg / Sqm Including The Jointing The Joints With White Cement And Matching Pigments Etc Complete Size Of Tile 600 Mm X 600 Mm. , Providing And Laying Vitrified Tiles In Dado Of Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is :15622 Of Approved Make In All Colours And Shade, Laid Over 20 Mm Thick Cement Concrete Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Jointing With Gre Cement Slurry @ 3.3 Kg / Sqm Including The Jointing The Joints With White Cement And Matching Pigments Etc Complete , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Shades On New , Applying Birla White Wall Care Putty Over Plaster Surface After Thoroughly Brushing The Surface Free From Mortar Drops, Dust, Loose Materials And Other Foreign Matters Sand Papered Smooth To Give Final Matter Finish To The Surface Complete. , Applying Priming Coat Over New Steel And Other Metal Surfaces After And Including Preparing The Surface By Thoroughl Cleaning Oil Greases, Dirt And Other Foreign Matter And Scoured With Wire Brushes Fine Steel Wool Scrapers And Sand Paper Complete. For Steel Hysd Bars Already Projecting Over Slab , Painting Two Coats ( Excluding Priming Coat ) On New Steel And Other Metel Surfaces Under Coat With Ready Mixed Paint Brushing To Give An Even Shade I / C Cleaning The Surface All Dirt, Dust And Other Foreign Matter With Ready Mixed Paint Other Than White Including Carriage Of All Labour Equipment And Material . , Applying Priming Coat Over New Wood And Wood Based Surfaces After And Including Preparing The Surfaces By Thoroughly Cleaning Oil, Grease Dirt And Other Foreign Matter Sand Papering And Knotting With Ready Mixed Paint Brushing Wood Primer Pink As Per Hp.Pwd Specification, Including Carriage Of All Labour Equipment And Material To Various Location Through All Modes Of Transportation In All Leads And Lifts, Including All Incidental Charges. , Painting Two Coats ( Excluding Priming Coat ) On New Wood And Wood Basedsurfaces With Enamel Paint Brushing To Give An Even Shade Including Cleaning The Surface Of All Dirt, Dust And Other Foreign Matters With Enamel Paint Other Than White As Per Hp.Pwd. Specification, Including Carriage Of All Labour Equipment And Material To Various Locations Through All Modes Of Transportation In All Leads And Lifts, Including All Incidental Charges. , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. , In Trusses And Trussed Purlins In Buildings. , In Gratings, Framed, Guards, Bars Ladders And Railing, Brackets And Similar Works :- , Providing And Fixing M.S. Tubular Frames For Door, Windows, Ventilators And Cupboard With Rectangular Sections Made From M.S. Channel Section Size 75 Mm X 40 Mm ( Thickness 5 Mm ) Flats Of Size 75 Mm ( Thickness 6 Mm ) Flat Of 40 Mm Size 12 Mm Thickness And Angle 25 X 15 X 3 Mm Size Joints Mitred, Welded Or Rigidly Fixed By Mechanical Means And Grinded Finish, With Profiles Of Recquired Size, Including Lugs With Spilit End Tails To Each Jamb Fixing Of Necessary Butt Hinges 2.5 Mm Thick With Provision Of Locking Arrangement And Shock Absorber And Screws And Applyinga Priming Coat Of Approved Steel Primer As Directted By Engineer-In Charge , Providing And Fixing 0.60Mm Th. Prepainted Steel Sheet In Roofing With Hot Dipped Metallic Zinc Coated Sheetwith Top Coat Of Regular Modified Polyster ( Rnp ) Organic Coating Of 20 Microns Over 5 Microns Primer Coating To Back Coat Polyster Of 5Microns Over 5 Microns Primer Coating I / C Fixing With Prepainted Iron J Or L Hooks, Bolts And Nuts 6Mm Dia Metre With Prepainted Limpet And Rubber Washers Complete All Accesories As Required As Per The Direction Of Engineer- In- Charge , Providing And Fixing M.S. Bp Sheet2.00 Mm Thick In Eaves Board / Facia / Soffits / Ceiling Including Cutting, Fixing And Welding To Steel Roof Members And Applying A Coat Of Red Lead Primer Complete As Per The Instruction Of Engineer-In-Charge ( Base Members Of Steel Work Shall Be Measured & Paid Separtely ) Including Carriage Of All Labour Equipment And Material To Various Location Through All Modes Of Transportation In All Leads And Lifts, Including All Incidental Charges. , Making Connection Of Galvanised Steel Distribution Branch With Gms Main 20Mm To 40Mm Nominal Bore By Providing And Fixing Tee I / C Cutting And Threading The Pipes Complete. Including Carriage Of Materials Within All Leads And Lifts :- , P / Ftoilet Paper Holder Of Approved Quality , P / F Cp Brass Pillar Tap With Capstan Head ( A ) 15 Mm Nominal Bore , P / F Cp Angle Cock 15 Mm Dia , P / F Of Cp Brass Trap For Wash Basin Or Sink , P / F C.P. Stop Cock 15 Mm Dia , P / F Vitreous China Wash Basin With Single Hole For Pillar Tap With Ci Or Ms Brackets Including Holes And Making Good The Same But Excluding The Fittings. , P / F Ptmt Automatic Flushing Cistern 5 Litres Net Capacity , P / F Chromium Coated Soap Dish With Cp Brass Brackets , P / F Pvc Waste Pipe Flexible 32 Mm Dia Length Not Less Than 800 Mm , P / F Ptmt High Quality Hanging Room Mirror Of 4 Mm Thick Glass Of Approved Size. , Providing And Fixing Pvcwater Tank Of Isi :-12701 Marked, G.I. Inlet And Outlet Connection, 15 Mm Nominal Bore Ball Valve And Mosquito Proof Pvc Cover With Locking Arrangment Including Hoisting Up To All Heights Above Ground Level. ( Make Sintex Having Capacity Of 1000 Liters ) Including Carriage Of All Labour Equipment And Material To Various Location Through All Modes Of Transportation In All Leads And Lifts, Including All Incidental Charges. , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitablematerial. , Providing And Laying Cement Concrete 1:4:8 ( One Cement Four Sand :Eight Graded Cursed / Broken Stone Aggregate 20 Mm ) ( Twenty Millimeters Nominal Size ) Mechanically Mixed And Curing Complete, Excluding Cost Of Form Workwithin Allleads, Lifts Of Materials And Other Incidentals Of Direction Of The Engineer-In- Charge. , Reinforced Cement Concrete Work In Beams, Suspened Floors, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircase And Spiral Stair Cases Above Plinth Level Upto Floor Five Level, Excluding The Cost Of Centering Shuttering Finishing And Reinfrocement With 1:1.5:3 ( 1 Cement: 1.5 Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size.Excluding Cost Of Form Work Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge Within Allleads, Lifts Of Materials And Other Incidentals Of Direction Of The Engineer-In- Charge. , Providing Mild Steel / Tor Steel Reinforcement Including Cost Of Bindingwire For R.C.C. Work Including Bending, Binding , Cutting And Placing In Position Complete. Tor Steel. Including Carriage Of All Labour Equipment And Material To Various Location Through All Modes Of Transportation In All Leads And Lifts, Including All Incidental Charges. , Second Class Brick Work Using Common Burnt Clay Building Bricks Superstructure In Cement Mortar 1:6 ( 1 Cement : 6 Sand ) Including Carriage Of Material In All Leads And Lifts As Per Direction Of Engineer - In - Charge , Second Classhalf Brick Masonary In Common Burnt Clay Building Bricks In Superstructure In All Floor Levels In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Carriage Of Material In All Leads And Liftsas Per Direction Of Engineer - In - Charge , Providing Formwork With Steel Plates Of 3.15 Mm ( Three Decimal One Five Millimeter ) Thick Welded Thick Welded With Angle Iron In Frame Of 30 X 30 X 5 Mm Soas To Give Fair Finish In Flat Surfaces Such As Suspended Floors , Slabs And In Vertical Surface Such As Walls Including Carriage Of Materials Within All Leads And Lifts As Per Direction Of Engineer In Charge. , Backfilling Behind Abutment Wingwalls Etc With Granular Material Within All Leads And Lifts. , Providing And Fixing On Wall Face Unplasticised-Pvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Pipes Conforming To Is: 13592 Type A, Including Jointing With Seal Ring Conforming To Is: 5382 ( I ) Single Socketed Pipes. 110 Mm Dia. , 15 Mm Cement Plaster In Single Coat On Rough Side Of Brick / Concrete Walls For Internal Plastering Upto Floor Two Level Including Arrises, Internal Rounded Angles, Chamfers And / Or Rounded Angles Not Exceeding 80 Mm In Girth And Finished Even And Smooth.

INR 350 /-

INR 27000.0 /-

INR 13.47 Lakhs /-

Name of Work:Balance work of C/o Veterinary Hospital building at Nakrari Tehsil Jubbal Distt. Shimla H.P. ( SH: Woodwork in doors and windows, glass panes, paintinting, finishing, steel work in roofing and septic tank 100 users capacity )

Sl. No.	Item Description
1	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws and 4 mm glass panes glaze all complete as per direction of Engineer-in-charge.
2	Providing and fixing 12 mm ( twelve millimeter ) thick Coir Veneer Board (conforming to IS 14842) panneled or panelled and glazed shutters for doors with including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, within all leads and lift of materials and other incidentals all complete as per direction of Engineer-in-charge.
3	Supplying and fixing glass panes with putty and nails Plain Glass 4 mm thick
4	300 X 16 mm size
5	250 X 16 mm size.
6	250x10mm
7	150 X 10 mm size.
8	125 mm size
9	75 mm size.
10	Providing and fixing aluminium door stoper with rubber cushion 100mm within all leads and lfits
11	Proviidng and fixing brigh finished M.S.hooks and eyes 10mm within all leads and lifts as per directions of Engineer in charge
12	Providing and fixing square edges cover fillets (beading) 19 x 6 mm section i/c mitring at junctions with wood screws and nails complete. In 1st. Class D/Wood including carriage of all labour equipment and material to various location through all modes within all leads and lifts
13	Kota stone slab mirror polised / uniform colour flooring 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab Including rubbing and polishing complete 19 mm thick mirror polishedslab size not less than 550mmx550mm including carriage of materials within all leads and lifts as per directions of Engineer in charges
14	Kota stone slab 19mm thick mirror polished of slab size not less than 550mmx550mm in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurryfixed with pigment to match the shade of the slabs including rubbing and polishing completeincluding carriage of material within all leads and lifts as per directions of Engineer in charges.
15	Providing and laying vitrified floor tiles in different sizes (thickness to be specified b the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in al colours and shade, laid on 20 mm thick bcement concrete mortar 1:4 ( 1 cement: 4 coarse sand) jointing with gre cement slurry @ 3.3 kg/sqm including the jointing the joints with white cement and matching pigments etc complete size of tile 600 mm X 600 mm.
16	Providing and laying vitrified tiles in dado of different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shade, laid over 20 mm thick cement concrete mortar 1:4 ( 1 cement: 4 coarse sand) jointing with gre cement slurry @ 3.3 kg/sqm including the jointing the joints with white cement and matching pigments etc complete
17	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more shades on new
18	Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.
19	Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughl cleaning oil greases, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. For steel HYSD bars already projecting over slab
20	Painting two coats (excluding priming coat )on new steel and other metel surfaces under coat with ready mixed paint brushing to give an even shade i/c cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than white including carriage of all labour equipment and material .
21	Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
22	Painting two coats (excluding priming coat) on new wood and wood basedsurfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
23	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
24	In trusses and trussed purlins in buildings.
25	In gratings, framed, guards, bars ladders and railing, brackets and similar works :-
26	Providing and fixing M.S. Tubular frames for door,windows, ventilators and cupboard with rectangular sections made from M.S. Channel section size 75 mm X 40 mm ( thickness 5 mm) flats of size 75 mm (thickness 6 mm ) flat of 40 mm size 12 mm thickness and angle 25 X 15 X 3 mm size joints mitred, welded or rigidly fixed by mechanical means and grinded finish, with profiles of recquired size, including lugs with spilit end tails to each jamb fixing of necessary butt hinges 2.5 mm thick with provision of locking arrangement and shock absorber and screws and applyinga priming coat of approved steel primer as directted by Engineer-in Charge
27	Providing and fixing 0.60mm th. Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete all accesories as required as per the direction of Engineer- IN- Charge
28	Providing and fixing M.S. BP Sheet2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
29	Making connection of galvanised steel distribution branch with GMS main 20mm to 40mm nominal bore by providing and fixing tee i/c cutting and threading the pipes complete. including carriage of materials within all leads and lifts :-
30	P/Ftoilet Paper Holder of approved quality
31	P/F CP Brass pillar Tap with capstan head (a) 15 mm nominal bore
32	P/F CP Angle cock 15 mm dia
33	P/F of CP brass trap for wash basin or sink
34	P/F C.P. stop cock 15 mm dia
35	P/F vitreous china wash basin with single hole for pillar tap with CI or MS brackets including holes and making good the same but excluding the fittings.
36	P/F PTMT automatic flushing cistern 5 litres net capacity
37	P/F Chromium coated soap dish with CP brass brackets
38	P/F PVC waste pipe flexible 32 mm dia length not less than 800 mm
39	P/F PTMT high quality hanging room mirror of 4 mm thick glass of approved size.
40	Providing and Fixing PVCwater tank of ISI :-12701 marked,G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting up to all heights above ground level. (make SINTEX having capacity of 1000 liters) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
41	Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.
42	Providing and laying cement concrete 1:4:8(One cement FOUR sand :EIGHT graded cursed/broken stone aggregate 20 mm) (Twenty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form workwithin allleads, lifts of materials and other incidentals of direction of the Engineer-in- Charge.
43	Reinforced cement concrete work in beams, suspened floors, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level upto floor five level, excluding the cost of centering shuttering finishing and reinfrocement with 1:1.5:3 ( 1 cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size.excluding cost of form work including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge within allleads, lifts of materials and other incidentals of direction of the Engineer-in- Charge.
44	Providing mild steel/Tor steel reinforcement including cost of bindingwire for R.C.C. work including bending, binding ,cutting and placing in position complete. Tor steel. including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
45	Second class brick work using common burnt clay building bricks superstructure in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts as per direction of Engineer - in - Charge
46	Second classhalf brick masonary in common burnt clay building bricks in superstructure in all floor levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and liftsas per direction of Engineer - in - Charge
47	Providing formwork with steel plates of 3.15 mm ( three decimal one five millimeter) thick welded thick welded with angle iron in frame of 30 X 30 X 5 mm soas to give fair finish in flat surfaces such as suspended floors , slabs and in vertical surface such as walls including carriage of materials within all leads and lifts as per direction of Engineer in Charge.
48	Backfilling behind abutment wingwalls etc with granular material within all leads and lifts.
49	Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382 (i) Single socketed pipes. 110 mm dia.
50	15 mm cement plaster in single coat on rough side of brick/concrete walls for internal plastering upto floor two level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth.