|
| 1 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed. |
| 2 | M&L for brick work with burnt old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radiuscomplete all as specified and as directed . |
| 3 | M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius complete all as specified and as directed . |
| 4 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etccomplete all as specified and as directed . |
| 5 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smoothcomplete all as specified and as directed . |
| 6 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed . |
| 7 | M&L for Cement concrete 100 mm thick type B- 2, 1:2:4 (40mm graded aggregate)complete all as specified and as directed . |
| 8 | Demolition of Reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed . |
| 9 | M&L for Pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landing, cover slabs (for manhole covers, drains etc) set in CM 1:6complete all as specified and as directed . |
| 10 | M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etc binding with mild steel wire not less than 0.90 mm dia (annealed)complete all as specified and as directed . |
| 11 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permisescomplete all as specified and as directed . |
| 12 | Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4complete all as specified and as directed . |
| 13 | M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishescomplete all as specified and as directed . |
| 14 | Demolition of stone slabs tiles of any description or thickness in floors apronslaid bedded and pointed in any morter etccomplete all as specified and as directed . |
| 15 | Granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floorscomplete all as specified and as directed . |
| 16 | All as per item No 15 but fixed in vertical surfaces of wall but 10 mm screed bed thick CM 1:4. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed . |
| 18 | S & F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165)complete all as specified and as directed . |
| 19 | M&L for Preparation of new or previously treatedsteel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paintcomplete all as specified and as directed . |
| 20 | M&L for Preparation of old paintedsteel surfaces of any description, over 10 cm width or girth, not otherwise described appling onecoat of synthetic enamel paintcomplete all as specified and as directed . |
| 21 | M&L forpreparation of new plastered surfaces of walls and applying two coat of cement base paint over Priming plastered and other surfaces with alkaliresistant priming paint complete all as specified and as directed . |
| 22 | M&L for preparation of old decorated plastered surfaces of wall and applying one coat of white washcomplete all as specified and as directed . |
| 23 | M&L forpreparation of old plastered surfaces of walls and applying two coat of cement base paint over a coat of primercomplete all as specified and as directed . |
| 24 | M&L forpreparation of old plastered surfaces of walls and applying one coat of cement base paint complete. |
| 25 | Demolition and breaking up drain pipes 600mm(Salt glazed ware, AC or Reinforced concrete) set in cement mortarcomplete all as specified and as directed. |
| 26 | Demolition and breaking up drain pipes 900mm(Salt glazed ware, AC or Reinforced concrete) set in cement mortarcomplete all as specified and as directed. |
| 27 | M & L for 600 mm bore reinforced concrete pipes class NP3,laid and jointed complete with collarscomplete all as specified and as directed . |
| 28 | M & L for 900 mm bore reinforced concrete pipes class NP3,laid and jointed complete with collarscomplete all as specified and as directed . |
| 29 | M&L for cement concrete bed to drain pipe 900 mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and completele surrounding pipes with concrete after they are laid and tested all complete all as specified and directed. |
| 30 | M&L for cement concrete bed to drain pipe 600 mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and completele surrounding pipes with concrete after they are laid and tested all complete all as specified and directed. |
| 31 | Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etccomplete all as specified and as directed . |
| 32 | Demolition of cement concrete in roofs, floors(other than ground floors), staircase, landing and similar suspended workcomplete all as specified and as directed . |
| 33 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqmcomplete all as specified and as directed . |
| 34 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured and paid seperately)complete all as specified and as directed . |
| 35 | Supply only Integral water proofing compound |
| 36 | M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregatecomplete all as specified and as directed . |
| 37 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced applicationincluding coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium paint at 100 gm per sqmcomplete all as specified and as directed. |
| 38 | M&L for cement concrete tiles 30x30x20 mm thick machine pressed tiles set jointed and pointed in with grey cement and pigments and flush pointed and polished over 20mm thick screed bed in cement morter 1:3complete all as specified and as directed . |
| 39 | Disconnecting exc 250 & n exc 500 ltr existing tanks, setting aside (or lowering ) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in positioncomplete all as specified and as directed . |
| 40 | On horizontal surface: M&L for providing cement concrete of min 75 mm thick of M20 grade using 12.5mm graded stone aggregate to be admixed with water resisting and crystalline water proofing admixture Sika® Control- 200 P (IN) @0.8% to 2% by weight of cement mixing at site and placed in position finished even and smooth with proper slope, all as specified and as directed incl demolition of old PCC. (Admixture measured and paid separately) |
| 41 | Supply only Sika® Control- 200 P (IN) complete all as specified and as directed . |
| 42 | On vertical wall/surface : Supply and apply a protection plaster15 mm thick 1 : 4 admixed with Sika® Plastocrete Plus @100ml per 50kg bag cement incl taking down old plaster surface.Product requirements admixture: conforms to IS 2645complete all as specified and as directed.(WPC measured and paid separately) |
| 43 | Supply only Sika® Plastocrete Pluscomplete all as specified and as directed . |
| 44 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacecomplete all as specified and as directed . |
