Chennai Port Trust-CPT has published Tender For Risk And Cost Tender Completion Balance Works Of Replacement, Damaged Acc Sheet Roofing Cb, Wq3 Transit Sheds With Non Ac Sheet Roofing, Replacement Of Damagd Flooring, Renovation Works In Cb, Wq3, Wq4 Transit Sheds Of Eend1 Divisn. Submission Date for this Tender is 14-02-2024. Shed Construction Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1. Providing double scaffolding arrangements using steel pipes to the required height around the Centre berth shed and wherever required for carrying out repair/renovation works,including providing necessary tie member,bracings etc., all-round and platforms at various level of adequate strength including removing the scaffolding with platform after completion ofwork, all as directed at site of work including all labour, materials, tools, equipments,transport, fuel etc., complete. Note (1). 75% of payment may be released after erecting the scaffolding in all respect. (2) The balance 25% ofpayment will be released after completion of repair/renovation works and removal of scaffolding. |
| 2 | 2.Dismantling and removing the existing damaged Asbestos cement corrugated sheet and ridges etc., wherever required without damaging near by structuresincluding collecting and stacking the broken ACC sheets within a lead of 50m for disposal and handing over the retrieved serviceable materials such as Asbestos cement corrugated sheets, J/ L bolts,nuts etc., toRSD yard within a lead of 3Kms all as specified and as directed at site of work including all labour, tools, tackles, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety netsetc., complete. |
| 3 | 3..Dismantling and removing the existing damaged Asbestos cement sheet Valley / Eaves Gutters etc., wherever required without damaging near by structures including collecting and stacking the broken ACC sheet gutters within a lead of 50m for disposal and handing over the retrieved serviceable materials toRSD yard within a lead of 3kms all as specified and as directed at site of work including all labour, tools, tackles, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety netsetc., complete. |
| 4 | 4. Dismantling and Removing the existing Damaged PVC Rainwater/ Drainagelines110mm/160mm Dia PVC pipe wherever required without damaging near by structures including collecting and stacking the broken pipes within a lead of 50m for disposal and handing over the retrieved serviceable materials toRSD yard within a lead of 3kms all as specified and as directed at site of work including all labour, tools, tackles, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety netsetc., complete. |
| 5 | 5.Dismantling and removing the existing wornout Mild steel door,Grill works and M.S windowof area 3Sqm and below, including all accessories such as frame with shutters etc., without damaging the structures nearby, including transporting and handing over the retrieved serviceable materials to RSD yard within a lead of 3kmsall as specified and as directed at site of work including all labour, tools, equipments, transport, fuel, scaffolding, safety belts, safety helmets etc., complete. |
| 6 | 6.Preparation of cement concrete surfaces of RCC columns, beams, slab and other RCC members to receive new finish / micro concrete, wherever major deteriorated concrete areas visible, by chipping and removing the weathered concrete (upto 25mm thick approx. behind the rebars) or as directed at site of work, removing the spalled out concrete including cleaning and removing all loose particles, to achieve a laitance and contaminant free surface including cleaning the surface of reinforcement steel to remove all rust and scales including collecting and depositing the debris within a lead of 50mfor disposal all as specified andas directed at site of work, including scaffolding, all labour, tools,safety belts, safety helmets etc., complete. |
| 7 | 7.Chipping thoroughly and removing the existing damaged plastered surfaces in cement mortarwherever required without damaging the nearby structures including collecting and depositing the debriswithin a lead of 50m for disposal all as specified andas directed at site of work, including all labour, tools, scaffolding, equipment,transport, fuel etc., complete |
| 8 | 8.Dismantling the existing damaged brickwork in cement mortar to the required heightwherever requiredwithoutdamaging the nearby structures including collecting and depositing the debris within a lead of 50mfor disposal all as directed at site of workincluding all labour, Scaffolding, tools, tackles, equipments, transport, fuel, safety belts, safety helmets etc.,complete. |
| 9 | 9. Dismantling and removing the existing damaged wooden false ceilingwherever required without damaging near by structures including bringing down the same to ground level, collecting and stacking the unwanted materials within a lead of 50m for disposal and handing over the retrieved serviceable materials to RSD yard within a lead of 3kms all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel, scaffolding etc., complete. |
| 10 | 10. Dismantlingand removing the existing damaged cement/tiled flooring andwall dadoing/plastered wall surfaces in cement mortar to the required thick, height wherever required without damaging the structure nearby, includingcollecting and bringingthe debris to the ground level and depositing the same within a lead of 50m for disposal, all as directed at site of work, including all labour, tools, equipments, transport, fuel, Scaffolding etc., complete. |
| 11 | 11. Dismantling and removing the existing damaged lean mix Plain cement concrete as existing at site of work and wherever required to the required level, size and shape without damaging the nearby structures including collecting and depositing the debris within a lead of 50m for disposal all as specified andas directed at site of work, including all labour, scaffolding, tools, tackles, equipment, plants, fuel etc., complete. |
| 12 | 12.Dismantling and removing the existing damaged Lime concrete as existing at site of work and wherever required to the required level, size and shape without damaging the nearby structures including collecting and depositing the debris within a lead of 50m for disposal all as specified andas directed at site of work, including all labour, scaffolding, tools, tackles, equipment, plants, fuel etc., complete. |
| 13 | 13.Preparing the surfaces and Providing & laying plain cement concrete of mix 1:4:8 (1 Cement: 4 Crushed stone sand: 8 hard granite graded stone aggregate of 40mm nominal size) in volumetric proportions for levelling course for flooring and wherever required all as per relevant specification and as directed at site of work including mixing, transporting, placing, ramming, consolidating, curing, shuttering, all materials, labour, tools,equipments, transport, fuel, etc. complete. |
| 14 | 14.Providing and laying Plain cement concrete of mix 1:1½:3 (1Cement: 1½ crushed stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions for flooring concreteand wherever required allas per relevant specifications and as directed at site of work including shuttering, mixing, transporting, placing, compacting, finishing, curing, all materials, labour, tools, equipments, transport, fuel etc., complete. |
| 15 | 15.Providing and laying Grano flooring concrete in plain cement concrete of mix 1:1½:3 (1Cement: 1½ crushed stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) to the levels and falls to a finished consolidated thickness of 50mm or as directed over a fresh layer of flooring concrete and finishing with the neat cement punning (2.2 kg/m2) including mixing, transporting, placing, curing, etc., all as per relevant, specifications, and as directed at site of work including all labour, materials, tools, plants, equipment, fuel, thread lines of panel size of 2m x 2m etc., complete. |
| 16 | 16. Applying epoxy resin bonding agent (Nito bond EPL of Fosroc or its equivalent) ( 2.20 Sq.m/Kg coverage)at the top of existing concrete surface using short haired brush and applied on the old concrete surface to receive new finish/concrete/plastering all as per manufacture specification and as directed at site of work.The rate shall include preparing the substrate,mixing the compound,applying,cost of materials,labour,brushes,tools, plant equipments ,transport,fuel etc complete. NOTE;The new concrete/plasteringshall be placed to the coated substrate,when it is in a tacky state. |
| 17 | 17. Providing and laying cement concrete of design mix M35 grade using CS sand for resurfacing / Wearing coat to the Wharfin panels of 4.5mx4.5m or any other suitable panel size as top layer of finished average thickness 50mm in wharf portionall as directed at site of work, includinglaid with proper slope and levels to drainout the rain water in to basin, including shuttering, mixing, transporting, placing, vibrating, curing etc.,all as per relevant specifications, and as directedincludingall labour,cement and all other materials, equipments, tools, plants, fuel, etc. complete. |
| 18 | 18.Supplying and fixing of 24" diaTurbo Air Ventilator with46 Nos. of Aluminium blades0.5mm thickwith Aluminium base of size 1mx1.83m and 1mm thick fixed on the top of roof with all accessories as per manufacturer"s specification and as directed at site of work including all labour, materials, tools, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety netsetc., complete. |
| 19 | 19.Supplying and fixing of 2mm thick embossed clear profiled polycarbonate sky light roofing sheets, thermoformed with both side UV coating (30 to 40microns) of approved make of SABIC Lexan or any other equivalentmaketo match with Non-Asbestos cement corrugated roofing sheet and fixed with Galvanised iron "J" or "L" hook, bolts & nuts 8mm dia, with GI plain & EPDM washers etc., mitering corners and lapping at sides and ends of sheets to suit existing purlin / rafter etc., all as per relevant specification and as directed at site of work including all labour, materials, tools, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety netsetc., complete. (i) The top of J/L bolt and nuts shall be sealed with weather proof silicane sealant(Black). ii) The skylight roof sheets shall be water tight and structurally sound inserted with adjacent roof sheets properly. |
| 20 | 20..Supplying and fixing of Non Asbestos cement corrugated roofing sheets of 6mm thick with natural grey colour conforming to IS 14871-2000, Type A, Category C, Class 7 for roofing over the existing mild steel purlins / rafters and fixing in position withGI L / J hook,bolt & nuts of 8mm dia (galvanised coating of 70 to 80 Microns)with GI plain & EPDM washers etc., including mitering corners and lapping at sides and ends of sheets to suit existing purlin / rafter etc., including inserting the sheet in the wall to required depth wherever required without damaging the existing structure all as per relevant specification and to match with the existing site conditions and as directed at site of work including all labour,materials,tools, tackles, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety nets etc., complete. Note:(i).The tenderer is advised to inspect the site before quoting the rates. (ii)The top of J/L bolt and nuts shall be sealed with weather proof silicane sealant (Black). iii)The roof sheets shall be lapped with turbo ventilators and sky light roofing sheets properly without any leakage. |
| 21 | 21.Supplying and fixing of serrated adjustable Non Asbestos cement corrugated ridges in pairs to suit the Non Asbestos cement corrugated roofing sheets of 6mm thick fixing in proper positionwith GI J / L Hook, bolts & nuts of 8mm dia (galvanised coating of 70 to 80 Microns) with GI plain & EPDM washers etc., without damaging the nearby roof sheets wherever required all as specified and as directed at site of work including all labour, materials,tools, tackles, equipments, scaffolding, transport, fuel, safety ladder, safetybelts, safety helmets, safetynetsetc., complete. Note: (i) The top of J/L bolt and nuts shall be sealed with weather proof silicane sealant (Black). |
| 22 | 22.Providing and fixing pre fabricated colour coated Galvalume metal sheet of 0.47mm TCT (Total Coated Thickness) as available in the market for making valley / Eaves Gutter to the required size and fixed in position over the MS bracket made up of 50X8mm MS flat with suitable necessary fasteners such asbolts, nuts and other accessories etc., and all as per site condition and as directed at site of work including all materials,labour,tools, equipments, transport, fuel, safety ladder, safety belts, safety helmets, safety nets, scaffolding etc., complete. |
| 23 | 23 .Supplying and Applying Reebaklens RR (rust remover) or equivalent with brush for complete wetting of rusted steelreinforcement bars in RCC column, beam and slab etc.,and preparing the surface free from all dust particles and loose materials by using wire brush and applying two coats of anti corrosive (Nitozinc primer of Fosroc or equivalent) protective coat of approved quality all as per manufacturer"s specification and as directed at site of work including all materials, labours, brushes, tools, plant, equipments, transport, fuel, safety ladder, safetybelts, safety helmets, scaffolding etc,. complete. Note:-The payment will be made for the actual surface area of reinforcement bars on which protective coating is applied. |
| 24 | 24. Supplying, mixing, pouring/ pumping of anti washout non shrink cementitious micro concrete (RENDEROC RG(M) of FOSROC or equivalent) for repair the damaged portions of columns, beams, waist slab and wherever required etc., mixed with 10mm to 6mm graded cleaned washed and saturated surface dry aggregates mixing the compound with the aggregatesin the mix proportionsas per manufacturer"s specifications and as directed. The rate includesconveying pouring the micro -concrete using positive displacement pumps, or any other suitable method including providing leak proof shuttering, materials, equipments, intercarting,mixing, placing, curing and all as directed at site of work including all materials, labour, tools, tackles, equipments, transport, fuel, scaffolding etc., complete. |
| 25 | 25. Preparing the exposed surfaces of repaired concrete members and applying two coats of protective coating using high performance aliphatic acrylate coating (Dekguard S standard of fosroc or its equivalent) including one coat of dekguard primer based on silence siloxane, all as per manufacturer"s specfications and as directed including all materials, labour, brushes, tools, plants, equipments, transport, fuel, scaffoldingetc,. complete. |
| 26 | 26.Providing Brick Work using bricks of class designation 50 in Cement Mortar1:5 (1 cement : 5 crushed stone sand) for walls aboveplinth up to first floor level and wherever required, all as per relevant specifications and as directed at site of work, including scaffolding, curing, all materials, labour, tools, equipments, transport, fuel, safety ladder, safety belts, safety helmets etc., complete. |
| 27 | 27. Preparing the concrete surfaces of wall and providing plastering in cement mortar 1:3(1cement: 3 fine crushed stone sand) 12mm thick to the required finish, curing etc., wherever required all as per relevant specification and as directed at site of work, including all materials, labour, tools, equipment, scaffolding, safety ladder, safety belts, safety helmets, safety nets, etc., complete. |
| 28 | 28. Providing flooring with vitrified tiles (Double charge) (Johnson/Kajaria/Nitco or equivalent) of size 600mm x 600mm or nearest size and 10mm nominal thickness as available in the market and of approved pattern, shade and colour set in C.M1:4 (1cement : 4crushed stone sand) 20mm thick, with required slope and fixed with cement slurry and joints neatly pointed with white cement added with pigment to match thecolour of the tiles, curing etc., all as per relevant specifications and as directed at site, includingall materials, labour, tools, equipments, etc., complete. |
| 29 | 29. Providing and fixing suspended Gypsum board false ceiling (at required height from the existing floor level) including providing and fixing Galvanised steel grid frame consists of G.I.perimeter channels of 0.50mm thick 27mm high having flanges of 20mm and 26mm long along the perimeter of ceiling, fixed to brick wall / partition with the help of nylon sleeves and screws / rawl plugs at 450mm centre to centre suspending G.I. intermediate channels of size 45mm x 15mm x 0.90mm thick running at required intervals as directed ceiling angle hanger of 25mm x 10mm x 0.55mm thick of required length fixed with 6mm dia bolts to the soffit cleat of size 25 x 25 x 1.6mm fixed to ceiling with 12.5mm dia 40mm long dash fasteners and 6mm dia 35mm long metal screws to which the ceiling section of size 80 x 26 x 0.50mm with tapered flanges having lips of 0.5mm at required intervals as directed fixed to the intermediate channel in a direction perpendicular to the intermediatechannel with connecting clips made out of G.I. wire at every junction, supplying and fixing 12.5mm thick plain gypsumboardwith tapered edges (Conforming to IS-2095) to the ceiling section and perimeter channels with 25mm long drive all screws at 230mm intervals including jointing and fixingthe boards to have a flush look by filling and finishing the tapered and square edges of the gypsum boards with recommended filler, paper tapes, finisher and including providing plaster of paris cornice (POP-Gypsum anhydrous) plain type of 100 mm wide at the junctions of false ceiling and wall, one coat of primer suitable for gypsum board all as per manufacturer"s specifications all as directed, including all materials, labour, tools, equipments, scaffolding etc., complete. |
| 30 | 30. (a) Providing and fixing of rigid unplasticized PVC pipes of 110mm outer dia (Finolex or Trubore or Varun or Supreme) 6kgf/sq.cm. for sewer line including necessary specials like bends, tees, elbows, shoes etc., joining the pipes using necessary adhesives, and fixing with PVC clamps and making connections to floor traps, gully traps, manholes etc., and making good the disturbed portions all as per relevant specification and all as directed at site including all materials, labour, tools, equipment, scaffolding, safety ladder, safety belts, safety helmets, safety nets etc., complete. |
| 31 | 30.(b).Providing and fixing of rigid unplasticized PVC pipes of 110mm outer dia (Finolex or Trubore or Varun or Supreme) 4kgf/sq.cm. for Rain water down take lines including necessary specials like bends, tees, elbows, shoes etc., joining the pipes to the Galvaume sheet gutters using necessary adhesives and sealants to ensure leak free joints, and fixing with PVC clamps and making connections to floor traps, gully traps, manholes, existing drain etc., and making good the disturbed portions all as per relevant specification and all as directed at site including all materials, labour, tools, equipment, scaffolding, safety ladder, safety belts, safety helmets, safety nets etc., complete. |
| 32 | 30. (c) Providing and fixing of rigid unplasticized PVC pipes of 75 mm outer dia (Finolex or Trubore or Varun or Supreme) 6kgf/sq.cm. for waste water line including necessary specials like bends, tees, elbows, shoes etc., joining the pipes using necessary adhesives, and fixing with PVC clamps and making connections to floor traps, gully traps, manholes etc., and making good the disturbed portions all as per relevant specification and all as directed at site including all materials, labour, tools, equipment, scaffolding, safety ladder, safety belts, safety helmets, safety nets etc., complete. |
| 33 | 30.(d).Providing and fixing of rigid unplasticized PVC pipes of 160mm outer dia (Finolex or Trubore or Varun or Supreme) 4kgf/sq.cm. for Rain water down take lines including necessary specials like bends, tees, elbows, shoes etc., joining the pipes to the Galvaume sheet gutters using necessary adhesives and sealants to ensure leak free joints, and fixing with PVC clamps and making connections to floor traps, gully traps, manholes, existing drain etc., and making good the disturbed portions all as per relevant specification and all as directed at site including all materials, labour, tools, equipment, scaffolding, safety ladder, safety belts, safety helmets, safety nets etc., complete. |
| 34 | 31.Removing the existing Mild steel sliding doors of size 4.7mx4.2m (approximate) and Refixing the same after completion of replacing the damaged components of existing MS silding door, without damaging near by structure, all as per relevant specifications and as directed at site of work, includingall labour, materials, tools, fuel, equipments etc. complete. Note: Replacing the damaged components of exisiting MS silding door will be measured and paid separately under relevant item of BOQ |
| 35 | 32. Cutting, removing the corroded /damaged Mild steel members in the existing Mild steelsliding door and providing new steel members such as MS bar, flat, plate,pannels of door, bottom rails,wheels, etc.,to suit the existing structural membersall as per relevant specifications and as directed at site of work, including cutting, welding, all labour, materials, tools, fuel, equipments etc. complete. Note: Removing and refixing the existing Mild steel sliding doors will be measured and paid separately under relevant item of BOQ |
| 36 | 33.Supplying and fixing Gear type operated (Mechanical type) Mild steelRolling Shutterwith crank handle including necessary locking arrangements of approved make to suit the opening of size5.00Mx5.00M (Approximately) and the guide deep channels made out of rolled M.S Section of size 25mm wide 75mm depth and 3.15mm thick of sheetwith necessary holding clamps for fixingto the masonry or concrete jambs and lock plate made out of 3.15mm thick M.S.plate reinforced with M.S. angle of 35mm X 35mm X5mm with two sliding locks at either endoperatable from both sides with minimum of two handles and riveted to the last stride of the curtain and the curtain shall be with 1.20mm thickness lath sections and ends clipped with 2 rivets and with 75mm rolling centers or as specified and the roller shall also be strengthened with cage type roller and ball bearings. The roller shall be made of steel pipe conforming to heavy duty of IS 1161 fitted with a pinion wheel at one end which is in contact with a worm fitted to the bracket plate. The machine cut gears, worms shall be connected with 25mm thick gear rod and the shutter will be operated through a gear handle and a sturdy gear box and the hood cover made out of 1.20mm thick M.S. sheet bend in the form of hexogen or square fitting the contact of the bracket plate and screwed to the holding with welded in the bracket plate the edges will be reinforced with 25mm X 25mm X 3mm angle / collapsible gate channel including making good the disturbed portion all in sound working conditions and as directed at site of work including applying one coat of red oxide primer including all labour, materials, scaffolding, welding, tools, equipments, transport fuel etc., complete. Note: For recording measurements the width shall be measured as the outer distance between the backs of the two guide channels of the rolling shutter and the height shall be distance between the sill and the centre of the hood cover. |
| 37 | 34. Supplying, fabricating and fixing in position of M.S Flat50mmx8mm or nearest sizefor providing Wind ties over the roof of the sheds, fixingwithGI L/J hook, bolt & nuts of 8mm dia (galvanised coating of 70 to 80 Microns)with GI plain & EPDM washers etc., after applying two coats of epoxy paint over a coat of zinc chromate metal primer, all as directed at site of work, including all labour, materials, scaffolding, transporting, tools, welding plants, gas cutting plants, equipments, fuel, safety ladder, safety belts,safety helmets, safety netsetc., complete. Note: Painting the surfaces of wind ties (MS flat 50x8mm) will be measured and paidseperately under relevant item in the BOQ. |
| 38 | 35.Supplying, fabricating and fixing in position of M.S flat 50mmx8mm or nearest sizefor providingBrackets at 1m C/C to hold valley/eaves gutter made up of galvalume sheet of 0.47mm thick to collect the rain water from the roof including fixing the brackets to the existing purlins using Bolt, nuts and clamps etc.,after applying two coats of epoxy paint over a coat of zinc chromate metal primer,all as directed at site of work, including all labour, material, scaffolding, transporting, tools, welding plants, gas cutting plants, equipments, fuel, safety ladder, safety belts, safety helmets, safety netsetc., complete. Note: 1. Painting the surfaces of MS Brackets (MS flat 50x8mm) and Providing gutter using galvalume sheet 0.47mm thick will be measured and paid separately under relevant item in the BoQ. 2. Applying two coats of epoxy paint over a coat of zinc chromate metal primer,will be measured and paid separately under relevantitem ofBOQ |
| 39 | 36. .Preparing the surfaces of newSteel members such as wind ties and MS brackets for holding gutters etc. and applying with two coats of Epoxy paint (Asian / Berger / Dulux or equivalent)of approved colour over a coat of zinc chromate metal primerto give an even shade and finish all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, safety ladder, safetybelts, safety helmets,etc., complete. NOTE:1. Necessary painting co-efficient shall be allowed as per Ch.P.T. engineering manual. 2.The above quantity is inclusive of painting co-efficient |
| 40 | 37.Removing the existing pealed off surfaces of white / colour wash etc., to receive new finish including preparing thewallsurfaces for applying colour washto give an even shade all as directed at site of work including all labour, scaffolding,tools, equipments, wire brushes, safety ladder, safetybelts, safety helmets, etc. complete. |
| 41 | 38. Preparing the surfaces of existing ceiling and applyingtwocoatsofwhite washing using Lovelycem or equivalentto give an even shade all as directed at site of work including binding materials, all labour, scaffolding, materials, tools, equipments, brushes, safety ladder, safetybelts, safety helmets, etc.,complete. |
| 42 | 39. Preparing the surfaces of interior and exterior wall and applying two coats of colour wash using Acrylic copolymer Emulsion paint (Asian / Berger / Dulux or equivalent) of approved brand and colour over a coat ofemulsion primer to give an even shade all as per relevant specifications and as directed at site of work including binding materials, all labour, materials, tools, tackles, equipments, brushes, scaffolding, safety ladder , safetybelts, safety helmets, etc., complete. |
| 43 | 40. Preparing the surfaces of Gypsum board false ceiling etc., and applying two coats of plastic emulsion paintfor gypsum board false ceiling (Asian / Berger / Dulux or equivalent)of approved colourto give an even shade and finish all as per relevant specification and as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, safety ladder, safetybelts, safety helmets, etc., complete. |
| 44 | 41. Preparing the surfaces of existing wooden members and applying two coats of synthetic enamelpaint (Asian / Berger / Dulux or equivalent)over a coat of primer of approved colourto give an even shade and finish all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, safety ladder, safetybelts, safety helmets, etc., complete. NOTE: 1. Necessary painting co-efficient shall be allowed as per Ch.P.T. engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 45 | 42.Preparing the surfaces of existing Steel members (doors / rolling shutters etc.,) and applyingtwo coats of synthetic enamel paint (Asian / Berger / Dulux or equivalent)of approved colourto give an even shade and finish all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, safety ladder, safetybelts, safety helmets, etc., complete. NOTE:1. Necessary painting co-efficient shall be allowed as per Ch.P.T. engineering manual. 2.The above quantity is inclusive of painting co-efficient |
| 46 | 43.Preparing the surfaces of new Steel members (doors / rolling shutters etc.,) and applyingtwo coats of synthetic enamel paint (Asian / Berger / Dulux or equivalent)of approved colourto give an even shade and finish, over a coat of red oxide primer all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, safety ladder, safetybelts, safety helmets, etc., complete. NOTE:1. Necessary painting co-efficient shall be allowed as per Ch.P.T. engineering manual. 2.The above quantity is inclusive of painting co-efficient |
| 47 | 44.Supplying and fixing tar felt roofing sheet as available in the market and fixing in position over the gutter portion and wherever required with suitable lapping and finishing the surfaces of felt with necessary biumen binding materialsand wherever required without damaging the nearby area all as specified and as directed at site of work including all materials, labour, tools, scaffolding, equipment, transport, fuel etc., complete. |
| 48 | 45 Supplying, fabricating and placing in positionHYSD (Fe 415/500 grade) TMT steel bars as reinforcement for all RCC cover slab wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification, drawings and as directed including all materials, labour, tools, equipment, transport, fuel, etc., complete. Note:1.The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured for payment purpose. 2.The contractor will be allowed to use Fe500 Grade TMT steel bar without claiming any extra cost. |
| 49 | 46.Casting, transporting and placing RCC Precast cover slabs for road crossing,Wharf area and drain cum cable chase, manhole and wherever required in mix 1:1.5:3 (1 cement : 1.5 Crused stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions to the required size, all as per relevant specifications, drawings and as directed at site of work includingshuttering / necessary formwork, mixing, transporting, placing, compacting, curing, finishing the exposed concrete surface withneat cement punning at 2.2 kg/Sq.m as directed, including lifting, handling, transporting and placing the precast slabs in correct position and alignment, providing necessary lifting holes including all materials, labour, tools, plants, equipments, fuel, etc., complete. Note : Steel reinforcement will be measuredand paid separately under relevant item. |
| 50 | 47.Desilting the existing storm water drains around the warehouses / Transit sheds wherever required and all as directed at site, depositing the desilting materials within a lead of 50m for disposal including all labour, tools, tackles, equipments, fuel, transport etc., complete. |
| 51 | 48.Loading, transporting dumping and levelling the surplus earth and debris within a lead of 3Kmall as directed at site of work including all labour, materials, tools, tackles, equipments,transport, fuel, etc., complete. 48(a).Earth Note: 1. The tenderer shall maintain trip sheets in triplicate in Trust’s approved format at his own cost for the quantity of earth transported. 2. Payment will be based on the lorry cubical contents. However, the final quantity will be restricted for item no 47 of BoQ 3. 20% voids shall be deducted for earth. |
| 52 | 48.(b).Debris Note: 1. The tenderer shall maintain trip sheets in triplicate in Port’s approved format at his own cost for the quantity of debris transported. 2. Payment will be based on the lorry cubical content. 3. No deduction for voids will be made. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
