Bulandshahr Development Authority has published Tender For Renovation Of Vidhansabha Speaker Residential Office Provision Of Video Conference System, Repairing Of Cow Shed, Construction Of Shed And Laying Of Paver Block Near Office Area At Kanke Road, Ranchi. Submission Date for this Tender is 01-02-2024. Shed Construction Tenders in ranchi Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/l. |
| 2 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 3 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 4 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
| 5 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including" cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l |
| 8 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 9 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) |
| 10 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 11 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with |
| 12 | weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). |
| 13 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 14 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 15 | Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin- charge and as per manufacturer"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 16 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :Second class teak wood |
| 17 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge. |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 19 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 20 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) |
| 21 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 22 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l. |
| 23 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 24 | Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l. |
| 25 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 26 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 27 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 28 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
| 29 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge. |
| 30 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 31 | 1.5 mm thick |
| 32 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm |
| 33 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type |
| 34 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x70x4 mm (ordinary type) |
| 35 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm |
| 36 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 65 mm |
| 37 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm |
| 38 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 39 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm |
| 40 | Providing 6 mm thick commercial plythick as per drawing, for plain lining / cladding with necessary screws, including priming coat on unexposed surface. - |
| 41 | Providing 12 mm commercial plythick as per drawing, for plain lining / cladding with necessary screws, including priming coat on unexposed surface. |
| 42 | Fevicol / Ktcat / Vamicol |
| 43 | Head Carpenter |
| 44 | Carpenter |
| 45 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : 8.28.1 Decorative veneer facings of approved manufacture |
| 46 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 47 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm |
| 48 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 49 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 50 | Carraige of Materials |
| 51 | Sand ( Lead 8km) |
| 52 | Local Sand 3km |
| 53 | Brick Lead 1k+7P |
| 54 | Chips 22 km |
| 55 | Metal 20km |
| 56 | Point wiring in PVC conduit, with modular type switch - Point wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required. |
| 57 | Group B |
| 58 | Power plug wiring in PVC conduit (2 x 4 sq.mm) - Wiring for light/power plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 59 | Circuit/submain wiring in PVC conduit - Wiring for Circuit/submain wiring along with earth wire the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. |
| 60 | 2x1.5 Sqmm + 1x1.5 sqmm earth wire (For 5/6A Plug Points) |
| 61 | 2x2.5 Sqmm + 1x2.5 sq mm earth wire |
| 62 | 2x6 Sqmm +1x6 sqmm earth wire (For essential TPN DB) |
| 63 | 4 x 6.0 sq.mm + 2 x 6.0 sq.mm earth wire |
| 64 | 4 x 10 sq.mm + 2 x 6 sq.mm earth wire |
| 65 | S/F Modular type switch socket - Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required |
| 66 | 5/6 amps,one way switch |
| 67 | 5/6 amps, 3 pin socket outlet |
| 68 | 15/ 16 amps, one way switch |
| 69 | 15/16 amps, 6 pin socket outlet |
| 70 | S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required |
| 71 | S/F power plug point with Modular type accessories - Supplying and fixing suitable size G.I. box with modular plate cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. |
| 72 | S/F Electronic musical Call bell :- Supplying and fixing Electronic musical call bell single phase. 230 volt, complete as required . |
| 73 | ITC exhaust fan upto 450mm sweeo - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required. |
| 74 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 75 | 25-100 amps, 10 KA fxed thermal setting |
| 76 | 200 amps, 35 KA, fixed thermal setting |
| 77 | 400 amps, 35 KA, Adjustable thermal setting |
| 78 | S/F sheet metal ON / OFF-Load changeover :- Providing and fixing following capacity 2 pole/ 4 pole ON/OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal board, making connection, earthing the body etc. as required. |
| 79 | 63 amps, 4 pole |
| 80 | Providing and fixing following capacity 4 pole ON-load panel mounted changeover switches in existing cubical panel board , making connection, earthing the body etc. as required. |
| 81 | 40 amps, 4 pole |
| 82 | S/F S.P. MCB DB :- Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 83 | 4 way, Single door |
| 84 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 85 | 4 way (8 + 12), Double door, Vertical type |
| 86 | S/F "C" series, MCB - Supplying and fixing following 240 volts, "C" series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connection, testing and commossioning etc. as required. |
| 87 | 6/32 amps, Single Pole |
| 88 | 40 amps, DP |
| 89 | Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 90 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required |
| 91 | S.I.T.C of floowing rating LED Street lighting luminariewith pressure die cast housing and toughenedglass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 92 | 20W LED Street light |
| 93 | S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminariewith pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required |
| 94 | 18/20W LED Round Down light |
| 95 | 12" (300mm) metal exhaust fan |
| 96 | 16" (400mm)Wall mounted fan" |
| 97 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 98 | 25 mm nominal dia Pipes |
| 99 | 32 mm nominal dia Pipes |
| 100 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 101 | 15 mm |
| 102 | 20 mm |
| 103 | Providing and fixing PTMT grating of approved quality and colour. |
| 104 | C.P. Gratings |
| 105 | Circular type - 125 mm dia |
| 106 | Special type C.P. Bath roomFitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) |
| 107 | Pillar cock (Long neck) |
| 108 | Bib cock (Long Thread) |
| 109 | Bib cock (2 Way) |
| 110 | Angular Stop Cock |
| 111 | Wall mixure with Provision for over head showerwith elbow cupling and wall flange |
| 112 | Pressure Adjustable Shower with revolvingjoint (Health Façade) |
| 113 | Towel rail 24 " |
| 114 | Towel Ring |
| 115 | soap dish |
| 116 | Tumbler Holder |
| 117 | Swan Neck Tap with left hand Operating Knob ISi Marked) |
| 118 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. |
| 119 | Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror |
| 120 | 600mm x 450mm size |
| 121 | Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brassbrackets and guard rail complete fixed with 40 mm long screws, rawlplugs etc., complete. |
| 122 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 123 | W.C. pan with ISI marked white solid plastic seat and lid |
| 124 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 125 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 126 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 127 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 128 | S/FModular boxes , base & cover plate(Gang Box):SITCing and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. |
| 129 | 1 or 2 module (78 mm x 78 mm x 45 mm)-for voice and data outlet.(Make- Legrand/Panduit/Ortronics) |
| 130 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess includingcutting the wall and making good the same in case of recessed conduit as required. Preffered Make- AKG/NORPACK/Polycab/Dauphin |
| 131 | 25 mm |
| 132 | 32 mm |
| 133 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required |
| 134 | 2 Run CAT6 UTP Cable (for Network only . (Make:Legrand/Panduit/RIT/Siemon) |
| 135 | Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B) |
| 136 | Compacting original ground- Compacting original ground supporting subgrade (Loosening of the ground upto a level of 500mm below the subgrade level, watered, graded and compacted in layers to meet requirement of table 300 2 for subgrade construction.)- Rolling with vobratory roller |
| 137 | Granular Sub-base with coarse graded material (Table:-400-2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)- for grading - II material |
| 138 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 139 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 140 | Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 141 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 142 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 143 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 144 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l. |
| 145 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 146 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). |
| 147 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : |
| 148 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600mm over all Girth) |
| 149 | Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the deptt.) |
| 150 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification) |
| 151 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 152 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 153 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size). |
| 154 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 155 | Suspended Floors, roofs, landings, balconies and access platform |
| 156 | Lintels, beams, Plinth beams, girders, bressumers and cantilevers |
| 157 | Providing TMT steel reinforcement above 8 mmdia bars as per approved design and drawing excluding carriage of M.S. roads (Straight or in coils) to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 158 | Providing TMT steel reinforcement above 10 mmdia bars as per approved design and drawing excluding carriage of M.S. roads (Straight or in coils) to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 159 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 160 | Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/l. |
| 161 | Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak proof including providing sight rails, bonning rod, night guard, red light and barrier etc. all complete as per specification and direction of E/l. 150 mm dia R.C.C. spun pipeUpto 3.0 meter depth of invert below G.L. |
| 162 | Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation andrefilling all complete as per specification and direction of E/l. |
| 163 | Supplying & Fixing Wallpaper for Office Wall ( 18 Ft X 10Ft), Product id: 5116877-85857375854 |
| 164 | LLOYD 2 Ton, 4 Start AC, LLOYDR, (GLC24I4 Series or Equivalent model), Product id: 5116877-72862522694, Country Of Origin: India, Availability of BIS/ISI Mark certification Yes Air Conditioner Compliance AC BEE Star rating of the product (in Nos. ) (Central Ministries/ Departments while procuring shall ensure that the items carry 5 star (where annual usages is expected > 1000 hrs),3 Star (where usage is Limited) ("0" Star Rating means "Not Aplicable") 4 |
| 165 | Supply, fitting, fixing, connecting and testing of 24-port x 10/100/1000T ports and4 x 100/1000X SFP ports, L2 Switch , Switching Capacity56Gbps and 41.66 mpps Forwarding Rate, Support for up to 4,094 VLANs simultaneously,Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLANWarranty 1 year from Day 1 . Make:- Cisco /Allied Telesis/HP |
| 166 | The above L2 Managed Data Switch consists of the following:- 1. Power cord India, right angle. 2. Both side Cable connector. 3. 1 year free service pack. Interface- 24 x 10/100/1000T ports and 4 x 100/1000X SFP ports Security:- Console port, GUI, Telnet, SSH,SNMPv1,2 and 3, powerful centralized management and zero-touch device installation and recovery like SDN, Routing:- IPv4 static routing and RIP. IPv6:- Device management over IPv6 networks with SNMPv6, Telnetv6, SSHv6 and Syslogv6 Diagnostic:- Optical Digital Diagnostics Monitoring,Automatic link flap detection and port shutdown,Port and VLAN mirroring (RSPAN) Operating Temparature:- 0°C to 50°C Certification:- EN,UL and RoHS |
| 167 | Video Conferencing equipment: |
| 168 | Video Conferencing equipment with Codec and 12x Camera, Mic and other accessories should support below specs: Video standards and protocols • H.261, H.263, H.264 AVC, H.264 High Profile, H.264 SVC, RTV • H.239 People+Content™ • H.263 & H.264 video error concealment Video input • 1 x EagleEye HD camera (HDCI) • 1 x HDMI 1.3 • 1 x VGA Video out • 2 x HDMI 1.3 Video resolution • 1080p, 60 fps from 1740 Kbps • 1080p, 30 fps from 1024 Kbps • 720p, 60 fps from 832 Kbps Audio input • 1 x RealPresence Group microphone array input port (supporting a total of 2 microphone arrays) • 1 x HDCI (camera) • 1 x HDMI • 1 x 3.5 mm stereo line-in Audio output • 1 x HDMI • 1 x 3.5 mm stereo line-out Audio standards and protocols • 22 kHz bandwidth with Siren™ 22 technology, AAC-LD (TIP calls) • 14 kHz bandwidth with Polycom® Siren™ 14 technology, G.722.1 Annex C • 7 kHz bandwidth with G.722, G.722.1 • 3.4 kHz bandwidth with G.711, G.728, G.729A Constant Clarity™ technology • Automatic gain control • Automatic noise suppression • Keyboard noise reduction • Polycom NoiseBlock™ technology • Live music mode • Instant adaptation echo cancellation • Audio error concealment • Polycom Siren Lost Packet Recovery™ (LPR™) technology • Polycom® StereoSurround™ technology Should support upto 6 Party MCU at additional cost Video Conferencing Camera Specification: Camera Type: 1/2.33” CMOS 1920 x 1080 resolution and 12x Optical Zoom PTZ Camera, Auto-iris, AGC |
| 169 | SITC of 65"4k Ultra HD OLED Google TV with 4k HDR processor XI , 4KX DLT Pro, Live Colour Technology, Trilimunous pro technology,10W+10Watt +10Wat t Speaker, Bass Refles , 3D Surround Upscaling, Onboard storage og 16 GB with Apple Airplay and Apple Homekit, Wi-Fi certified,; Make- Sony/Criste/ NEC |
| 170 | SITC of Wireless Access Point dual Band 2.4 GHZ & 5 GHZ, Controller less roaming,2x2 MIMO, multihop mesh, Auto pilot controller,802.11 ac wave2,Gigabit Ethernet, Internal ,Omni-directional,256 clients, 32 SSIDs (16 per radio) WPA-TKIP, WPA2 AES, 802.1x, 802.11w PMF, Max-Phy rate 2.4 GHZ:400 Mbps 5 GHZ:867 Mbps. Should have certifications like Wi-Fi Alliance 802.11 a/b/g/n/ac, Passpoint 2.0 FCC, ETSI, CE, EN 60601-1-2, IEC62368 UL2043; Preffered Make- Aruba/CIsco/Cambium/Allied Telesis |
| 171 | SITC of 24 port UTP jack panel (24 portRJ-45 Loaded CAT-6 UTP 19" rackmountable patch panel preferbaly with 6 blocks). (Make:Legrand/Panduit/RIT/Siemon) |
| 172 | Detailed Specs for 19" 1U 24 port unsheilded Patch Panel Patch panel should be modular design, populates up to 24 UTP keystone-type jacks in 1U Patch panel should be Enhanced with cable strain relief with retention tray; It should be single metal both front panel and rear tray Material: sub-rack made of MS Steel with dimension 44.4 mm :482.6 mm : 105 mm (h:w:d) tray Information Outlet or connectin module should comply with the specification mentioned above in 2 Standard : Conforms to IEC-60603-7 (603-7) for keystone-type, snap-on apertures Should be RoHS complied |
| 173 | SITC of Straight LAN Patch Chord-3 Mtr (Make:Legrand/Panduit/RIT/Siemon) |
| 174 | SITC of Straight LAN Patch Chord-1 Mtr (Make:Legrand/Panduit/RIT/Siemon) |
| 175 | Detailed Specs for Patch Cord, U/UTP 4P, Cat.6, length 1/3 Metre Standardization: Compliant with Cat.6, Class E requirements: ISO/IEC 11801 2nd Edition Compliant with Cat.6 component standards IEC 60603-7-4 and 60603-7-5 Cable shield: U/UTP Number of conductors : 8 Stranding: 7 x 0.20 mm (24 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.5±0.2 mm Tube / Wire type: stranded conductor Insulation: solid polyolefin, 0.97±0.02 mm diameter Plug: Feature cable retension, with enhanced pull strength. Cat 6 patch cord plug to have round cable holder and strain relief boot to avoid bending. Jacket: PVC with 8 different color options Plug should have high repeatability cross talk performance |
| 176 | SITC of white modular plate type Single front plate for 1 Nos. RJ 45 Dataoutlet (Make:Legrand/Panduit/RIT/Siemon) |
| 177 | Should be UK style Keystone-type Faceplates are available in 1, 2 & 4 port configurations Should be featured with shutter options, the screws not to be visible Should support Work with both Flush and Wall mount box Should support Operating Temperature: -10~+60; Storage Temperature: -40~+68; Humidity: 10%~90% RH Material: ABS, UL 94V-0; Spring: SUS304; Surface Finish: Polished |
| 178 | SITC ofRJ 45 Data Module to be fixed on face plate (Make:Legrand/Panduit/RIT/Siemon) |
| 179 | RJ45 Jack of Category 6, for the establishing of transmission channels of class E with up to 4 plugged connections, complies with Category 6 requirements of the standards ISO/IEC 11801:2nd edition, EN 50173-1, DIN EN 50173-1: 2002 as well as ANSI/TIA/EIA 568-B.2-1, de-embedded tested in acc. with IEC 60603-7 (603-7), interoperable and backwards compatible with Cat.5e and Cat.5. Suitable for 10GBase-T applications in acc. with IEEE 802.3an up to 500 MHz and 55 m. Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB- and tool based connection of installation cables AWG 24 – 22 (0.5 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7. IDC termination should feature nil crossover in acc. with EIA/TIA 568-A/B, gold-plated bronze contacts for >750 mating cycles, >200 insertion cycle Material: RoHS complied Housing material: Polycarbonate (UL-94-V0) Should be available with or without dust protection feature Should be 3P certified |
| 180 | SITC of Fully Loaded 9 U 19" 600*500 Wall Mounted Rack with all required accessories -2 Nos. of Fan,6A 6 Plug PDU-1 Nos. ,Cable Manager-2 Nos., Mounting Screws-20 Pcs ; Preffered Make-Legrand/APW/President/Valrack |
| 181 | 4 Pair Cable with integral cross -member pair separator for uniform characteristic impedance. Category 6 Unshielded Twisted 4 Pair 100 O cable shall be compliant with ANSI/TIA/EIA-568-C.2-1 Additional ISO/IEC 11801:2010 (Ed. 2.2) and ISO/IEC 61156-5 Suitable for 10GBase-T applications in acc. with IEEE 802.3an up to 500 MHz and 55 m. Transmission Performance Specification for 4 Pair 100O Category 6 Cabling Category 6 UTP cables shall extend between the work area location and its associated telecommunications closet and consist of 4 pair, UTP CM cable jacket Conductor: Solid Copper Conductor Diameter: 0.555+-0.01mm (23AWG) Insulator HD Polyethylene solid Jacket: PVC RoHS complied Outer Diameter: 6.0 ± 0.2mm Max Temperature: -20°C to +70°C Should be ETL certified, UL Listed Should have Pulling force of 11.5Kg. Bend Radius: Installation: <4 X Cable Diameter at –20°C ±1°C,Operation: <4 X Cable Diameter at –20°C ±1°C Conductor Resistance :<9.38O /100m Resistance Unbalance5% Max Mutual Capacitance : < 5.6nF/100m Capacitance Unbalance : 330pF/100m. Propagation Velocity :69% ELT certified for 4 Channel should be submitted along with bid submission |
| 182 | SITC of Single Phase input single phase output power System online 3 kva UPS for Switchesand other IT equpiments Preffered Make-Vertiv/APC/GUTUR |
| 183 | SITC of 42 AH SMF Battery, with 24 months replacement |
| 184 | Sealed maintenance -free 3024VAH 20 minutes MS Battery Rack suitable for 6 UPS Battery installation |
| 185 | Supply, fitting, fixing, commissioning and testingof 6 Sq. MM Copper Conductor Multi strandPVC Sheilded FRLS Wire with suitable Copper LUGS for Battery Interconnection and suitable 6 Sq. mm copper wire of 2 length of 10 mtrs each for UPS to Battery excluding cable from power point to UPS. Make- Polycab/Havells/KEI |
| 186 | SITC of Mixer 10 channel Analog Mixer suitable for the prescribed solution Make-Souncraft/AKG/Yamaha/Bosch/BOSE ; |
| 187 | SITC ofwall mounted cabinet speaker 30 Watt includes mounting system Dual 4" 2-Way Surface-Mount Loudspeaker,Compact full range,Ideal for Conference Halls, patios, and retail,Vented LF enclosure,1-inch titanium diaphragm HF driver with neodymium magnetic structure,Coherent Coverage Waveguide,Full-bandwidth overload protection (LF and HF),Elliptical weather-resistant ABS enclosure,Paintable black or white finish,Magnetically shielded for video applications,Strong-Arm Mount™ for easy, flexible aiming,"T" version for 70 or 100 V distributed systems with specifications of Frequency Range (-10 dB)- 65 Hz – 20 kHz, Sensitivity (SPL, 1 W/1 m)- 89 dB,Max. SPL/1m (calc.)- 115 dB,Power Handling (Continuous, Peak)- 100 W, 400 W,Transformer taps(transformer version only)- 70 V: 3.75 W,70 V/100 V: 7.5, 15, 30 W, Coverage, H x V- 120° x 80°, LF Transducer-Two 4", HF Transducer -1", Nominal impedance-(non-transformer version)- 8 O, Dimensions (H x W at front x D) -12.2" x 6.9" x 8.5",(310 x 175 x 216 mm) ; Make- AKG/BOSE/EV |
| 188 | SITC of Power Amplifier Dual 250 W/CH Power Amplifier,Efficient performance for low impedance or distributed systems ,Ideal for sound reinforcement, paging, and life safety ,250 W per channel for 4 O or 70/100 V lines,Bridged mono out for 540 W into 8 O,Compact 2 RU design,Stepped rear-panel level attenuation,Selectable 50 Hz or 300 Hz high-pass filter,Thermal protection, peak limiting, turn-on delay Phoenix-type inputs and outputs,Three-stage front-to-rear fans,Integrated rack ears for direct mounting, havin detailed specs of Power Bandwidth THD=1%, Ref.1kHz, Half Power-45Hz - >20kHz,Input Impedance, 20Hz ... 20kHz,Balanced->20kOhm,Signal-to-Noise Ratio, A-Weighted 103 dB,Input Sensitivity at Rated Output Power or Voltage, 1kHz-0dBu (775mV),THD at rated output power, MBW=80kHz- 1kHz-<0.1%,IMD-SMPTE, 60Hz, 7kHz <0.1%,DIM30, 3.15kHz, 15kHz <0.1%,Crosstalk, Ref. 1kHz, at 15% Rated,Output Power-<-75 dB,Power Requirements- 120V or 230V, 50Hz -60Hz,Protection -Audio Limiters, High Temperature Peak Current Limiters,Turn-On Delay,Cooling Front-to-Rear Preferred Make: AKG/BOSE/EV(BOSCH ) |
| 189 | 10"X12" 18 Gauge Steel plate with four side screw hole as per the 8 x 10 MS box to be mounted on the cable juncutions Boxes at floor |
| 190 | Add 18 % GST (in Basic Rate must fill 12) |
| 191 | Add 1% Labour Cess (in Basic Rate must fill 1) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
