Military Engineer Services-MES has published Tender For Additional/Alternator Of Bldg No P-195 ( Civ Trg Centre ) And Additional/Alternator And Spl Rep To Meteorology Building P-138 & P-189 At Cnai ( South ) Nad Alwaye ( Revised ). Submission Date for this Tender is 14-02-2024. Building Work Tenders in kochi Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-02-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of brick/stone boulder masonry, built in cement mortar or cement lime mortar and disposal of unserviceable materials to a distance n. exc 100m all as directed. |
| 2 | Demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key. scrubbing down with water, etc complete all as specified and directed. |
| 4 | M&L for Non-skid coloured joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match (joint free non skid tiles) complete all as specified and directed. |
| 5 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450x 350x 7mm thick over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 6 | M&L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives at 1.43 loitre/10 sqm over and including priming coat of exterior primer applied at 0.90 litre/10 sqm over new surface complete all as specified and directed. |
| 7 | Taking down shutter exc 1Sqm and n. exc 2 sqm each complete all as specified and directed. |
| 8 | Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 9 | S&F 35mm thick 2 class HW rail and style plain framed, panelled shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part 1), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 10 | S & F Aluminium anodised, barrel tower bolts of extruded section and fixed of size 150mm complete all as specified and directed. |
| 11 | S & F mild steel butt hinges 100mm, medium weight complete all as specified and directed. |
| 12 | S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed. |
| 13 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 14 | S&F providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm), Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all comers, including drilling of holes for fixing hardware and drainage of water etc area not exc 2 Sqm.. making arrangement for fixing of hardware. EPDM gasket 1.2+-0.2mm thick galvanized steel frame (30mm x 21 5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 15 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections dia size, including necessary into IS 733 and IS:1285, fading with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, Le top, bottom and sides with required EPDM rubber/neoprene gasketetc etc aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as specified and directed |
| 16 | S&F figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each complete all as specified and directed. |
| 17 | S & F wash basins with half pedestal height 425mm snow white colour CERA cat part No: S2040163 & S2090132 CACKLE or equivalent in list of make. |
| 18 | S&F bottle trap 150mm CERA CAT No: F8060101 or equivalent in list of make. |
| 19 | S&F waste coupling 32mm CERA Cat no. F8050102or equivalent in list of make. |
| 20 | S&F polymid braided connection pipe 12mm dia 450mm long CERA CAT No: F8070402 or equivalent in list of make. |
| 21 | S&F pillar cock with aerator CERA Cat no. F1013111 or equivalent in list of make. |
| 22 | S&F single bowl sink manufactured from 1.0mm thick 304 grade stainless steel size: 810 X 455mm, depth: 203mm top mount CERA Cat no: B4512102 gloss finish or equivalent in list of make. |
| 23 | S&F sink mixer (wall mounted) with 150mm long swivel spout, connecting legs and wall flanges CERA Cat no. F1016251 or equivalent in list of make. |
| 24 | S&F Vitreous China one piece EWC. Snow white colour 670 x 350 x 720 mm size CERA CAMPBELL DELUXE CAT No: S1013170 with "S trap 220mm with slim soft close seat cover complete. |
| 25 | S&F Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.00 metre SS braided connection pipe tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. CERA CAT No: F8030109AB or equivalent in list of make. |
| 26 | S&F Chromium plated fancy type bib tap 15mm complete.CERA CAT No: F1099151 or equivalent in list of make. |
| 27 | S&F Chromium plated fancy type light weight concealed stop cock 15mm. CERA CAT No. F4050103 & exposed part F1016351 or equivalent in list of make. |
| 28 | S&F 700mmx500mm size and 5mm thick glass mirror with double coat for protection and longevity, grounded edges for safety and silver plating on the back for better reflection fixed with chromium plated brass screws complete all as specified and directed |
| 29 | S&F corner glass shelf with 2 racks CERA CAT No: F5005201 or equivalent in list of make complete all as specified and directed. |
| 30 | S&F toilet paper holder with flap guard CERA CAT No: F5004110 or equivalent in list of make. |
| 31 | S&F towel rail 450mm long CERA CAT No: 5006104 or equivalent in list of make. |
| 32 | S&F soap dish CERA CAT No: F 5004106 or equivalent in list of make. |
| 33 | S&F shower mixer consisting of exposed part (lever flange) and concealed part (cartridge sleeve) CERA CAMPBELL DELUXE Cat No: F1019778 & F4075102 or equivalent in list of make. |
| 34 | Supplying and laying of CPVC pipes 20mm outer diameter, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 35 | Supplying and laying of CPVC pipes 25mm outer diameter, SDR 11 & Plain CPVC SDR 11 fittings on walls/ celling or laying in floors complete all as specified and directed |
| 36 | S & F Stainless Steel floor trap drain with anti cockroach system of size 100 x 100 mm complete all as specified and directed |
| 37 | M&L reinforced cement concrete (design Mix M-30) (20mm graded aggregates) cement concrete slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed |
| 38 | M&L brick work with sub-class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed |
| 39 | Excavating in trenches in hard/dense soil n exc. 1.5m wide and n exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc. 1.5m in depth and getting out complete all as specified and directed |
| 40 | M&L cement concrete in foundations, filling and mass concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed |
| 41 | M&L PCC block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in 1:6 mortar, complete all as specified and directed |
| 42 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in 1:4 CM to be finished even and smooth without using extra cement with water proofing compound complete all as specified and directed. Note: Supply only WPC will be paid seperately. |
| 43 | M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:6 CM finished even and smooth (without using extra cement) complete all as specified and directed |
| 44 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) on rough finished surfaces of concrete complete all as specified |
| 45 | M&L RCC slabs Type B1 1:2:4 (using 20mm graded aggregate) supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 46 | S/F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking. bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 47 | M&L preparation of new plastered surface on walls and apply two coat of distemper oil emulsion over a coat of priming paint complete all as specified and directed |
| 48 | M&L preparation of new plastered surface on wallsand apply two coat of cement paint over a coat of priming paint complete all as specified and directed |
| 49 | M&L preparation of new plastered surface on ceilings and apply two coat of cement paint over a coat of priming paint complete all as specified and directed |
| 50 | Excavating in post holes (or similar holes) each n exc.0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil complete all as spd and as directed by Engineer in Charge |
| 51 | M&L Cement concrete type B2 1:2:4 (40 mm graded aggregate)in foundations, filling and mass concrete,post holes fillings etc complete all as specified and directed |
| 52 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161- 1979 grade St.-240 complete all as specified and directed |
| 53 | S&F Pre-painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self Tapping screws complete all as specified and directed |
| 54 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge etc fixed with self Tapping screws complete all as specified and directed |
| 55 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shapes directed, drilling holes, notching for wire, etc.; flat iron fillets etc complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40mm aggregate) complete all as specified and directed. |
| 57 | M&L PCC block masonry with solid exc.10 cm in width and setting in 1:4 mortar complete complete all as specified and directed. |
| 58 | M&L cement concrete type B1 1:2:4 (20 mm graded aggregate) 100 mm thick complete all as specified and directed. |
| 59 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of redoxide on steel surface |
| 60 | S&F Bands, straps, supports or stays or rainwater, ventilating pipes, including bolts, if required. hooks (stay), hold fasts; wall ties;plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 61 | S&F PVC half round rain water gutter system 160mm dia complete all as specified and directed |
| 62 | Supply only integral water proofing compound complete all as specified and directed. |
| 63 | S&F 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & fixed with screws to timber frame work complete all as specified. |
| 64 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
| 65 | M/L for preparation of old decorated surface of ceiling and applying two coats of oil bound distemper complete all as specified and directed. |
| 66 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. |
| 67 | Removing excavated material exc. 250M but n exc 500m and depositing where as specified and directed. |
| 68 | M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 69 | Surface Excavation in hard/dense soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. |
| 70 | Excavating over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed. |
| 71 | Removing excavated material (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 72 | M&L for Cement Concrete (1:4:8) Type D-2, 100 mm thick using 40 graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 73 | M&L for 50mm thick Fine Aggregate for laying interlocking paver blocks including spreading and levelling complete all as specified and directed. |
| 74 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment all complete all as specified and directed. |
| 75 | M&L for broken stone hard core of gauge n exc 63mm, deposited, spread and levelled in layer n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 76 | M&L for PCC (1:3:6) Type C-2 100 mm thick using 40 graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 77 | M&L for chequred cement concrete tiles 20 x 20 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM mortar 1: 6 complete all as specified and directed. |
| 78 | M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in side of path or similar work complete all as specified and directed |
| 79 | Dismantlig and cleaning of old APP roof treated surface any description complete all as specified and directed. |
| 80 | Brushing neat cement slurry with 3.00 Kg of cement per Sqm with WPC complete all as specified and directed. Note:- WPC will be measured and paid separately |
| 81 | M&L Rendering 15mm thick on fair faces of concrete surfaces in CM 1:3 finished even and smooth without using extra cement with using WPC complete all as specified and directed. Note:- WPC will be measured and paid separately |
| 82 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed. |
| 83 | M&L APP based Polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with Polyster nonware fabric (not less than 150 gms/sqm) laid on primed surface by forced By applied complete all as specified. |
| 84 | Dismantling floor, hearth or wall tiling including cement mortor bedding complete all as specified and directed. |
| 85 | M & L for Non-skid coloured joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding Q.11 sqm, in floors over 15mm thich screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 86 | M&L for 75mm thich PCC 1:3:6 Type C2 40mm graged aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 87 | M/L for Complete removal of existing treatment of wall and applying two coat of oil bound distempe and over a coat of primer complete all as specified and directed. |
| 88 | M/L for preparation of old decorated surface of ceiling and applying two coats of white wash complete all as specified and directed. |
| 89 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 90 | Dismantling battern for tiles, shingles etc of any size including fillets spaced exc. 15cm complete all as specified and directed. |
| 91 | Dismantling timber scantling 40 Sqcm and over in section, in any position unframed work complete all as specified and directed. |
| 92 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 93 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 94 | Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 95 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 96 | S&F 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 97 | S&F second class HW Clean sawn battens exc 15 and nexc 25 sqcm in section for roof tiles at 20 cm centres complete all as specified and directed. |
| 98 | S&F Second class hard-wood clean sawn scantlings in framed and fixed work complete all as specified and directed. |
| 99 | S& F 20mm thick second class HW boarding clean sawn with butt joint, fixed with nails in any situation (except flooring and skirting) complete all as specified and directed. |
| 100 | S & F Anodised aluminium snap grid frame work for false ceiling with size of grid 605x605mm all as specified |
| 101 | S&F hangers 6mm dia Gl (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified |
| 102 | S&F 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/Gl/Aluminium framework with screws complete all as specified and directed. |
| 103 | M&L for two coats oil bound distemper over one coat of alkali resistant primer on ceiling including preparation of new surface all as specified and directed. |
| 104 | M & L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in bed plates hold fast and similar work as directed. |
| 105 | S&F Rough cast, wired figured glass, 6.4mm thick and glazing with oil putty in squares exc 0.75 but not exc 1.0 Sqm complete all as specified and directed. |
| 106 | S&F Rough cast, wired figured glass, 6.4mm thick and glazing with oil putty in squares exc 0.5 but not exc 0.75 Sqm complete all as specified and directed. |
| 107 | M & L for two coat of synthetic enamel painting over a coat of pink primer of wooden surface of any description, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and directed. |
| 108 | M&L one coat of synthetic enamel paint including preparation of old wooden surfaces complete all as specified and directed. |
| 109 | S&F Wash basins, Vitreous China size 580x450mm (flat back or angle back type) in repair, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply andwaste pipe complete all as specified and directed. |
| 110 | S&F in repair Vitreous China squatting pan of pattern "long pan", size 580 mm white with Por "S trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete in all respect all as specified. |
| 111 | S&F in repairs, PVC valveless, syphonic action type, flushing cistern,10 ltr capacilty low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 112 | S&F in repairs cast copper alloy Chromium plated fancy type bib tap 15mm complete all as specified and directed. |
| 113 | S&F in repairs cast copper alloy, screwed , high pressure Chromium plated fancy type concealed stop cock 15mm complete all as specified and directed. |
| 114 | S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 115 | S&F PVC connection 15mm with PTMT nuts of length 450mm long complete all as specified and directed. |
| 116 | S & F in repairs cast copper alloy chromium plated fancy type pillar cock 15mm dia complete all as specified and directed. |
| 117 | M & L for cutting chases pinning in brick work for concealed water tubing and making good to facing where required and pointing in cement mortor 1:3, cutting not exc 10 cm girth complete all as specified and directed. |
| 118 | Taking down Gl tubing 15mm complete all as specified and directed. |
| 119 | Taking down Gl tubing 20mm complete all as specified and directed. |
| 120 | Dismantling of PVC water tank exc 250 Itrs and not exec 500 Ltrs complete all as specified and directed. |
| 121 | S&F PVC Rotational moulded polyethylene water storage tank cylindrical, vertical with closed top hoisted and fixed in position all as specified in SSR Part-1, 500 Ltrs complete all as specified and directed. |
| 122 | S & F 25mm bore ball brass valve high pressure with polythene float with fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 123 | S&F grating doom 100mm dia of PTMT complete all as specified and directed. |
| 124 | S&F brass chromium plated tubular towel rail 20mm dia D type 60 cm long complete all as specified and directed. |
| 125 | S&F 32mm dia waste fittings brass chromium plated in wash basin complete all as specified and directed. |
| 126 | S&F waste pipe for wash basin of size 32mm dia complete complete all as specified and directed. |
| 127 | S&F CP Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 128 | M&L Providing and injecting anti-termite chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 129 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 130 | M&L excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in soft/ disintegrated rock and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 131 | M&L cement concrete Type C2 1:3:6 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 132 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 133 | S&F Mild steel round bars 10mm dia and over confirming to Fe-410-W Gde E-250) quality A or Fe 290 (Gde -E-165), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 134 | M&L Demolition of reinforced cement concrete as in fins, facia, slab and similar works etc complete all as specified and directed |
| 135 | M&L Re-inforced cement concrete 1:24 Type B0 using 12.5 mm graded stone aggregate as in fins, tacias, parapets, slab etc. complete all as specified and directed |
| 136 | M&L formwork to fins, facia, louvers with fair finished surface of concrete complete all as specified and directed |
| 137 | M&L mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required binding with and including mild steel wiere (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed |
| 138 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed |
| 139 | Dismantling mangalore pattern roofing tiles single layers complete all as specified and directed |
| 140 | M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry. complete all as specified and directed |
| 141 | M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed. |
| 142 | Taking down chowkats with shutters n.exc 1.5 Sqm/ each complete all as specified and directed. |
| 143 | M & L for of 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 144 | Material and Labour for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for supporting of CI/GI pipes, header etc all as specified and directed by Engr-in-Charge |
| 145 | S & F Extruded aluminium bow handles 150mm fabricated type, anodised all as specified and directed |
| 146 | S & F Floor door stopper of aluminium alloy body of size 140mm and tongue anodised, with hard drawn steel spring, fixed in floor all as specified and directed |
| 147 | S&F powder coated aluminium grill of make DG 104 (10mm thick) with DL 102 frame complete all as specified and directed. |
| 148 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 149 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed. |
| 150 | Surface excavation n exc30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 151 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra san complete all as specified and directed. |
| 152 | Supply and spreading locally available dry M-Sand for covering and cushining of UG Cable in trenches complete all as specified and directed. Note: Punned thickness only measured and paid. |
| 153 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed. |
| 154 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core. complete all as specified and directed. |
| 155 | Supplying laying, jointing and testing Tubes, "light grade" galvanised, with all fittings and fixed complete to walls or laid under road for passing cables complete of size 50mm all as specified and directed. |
| 156 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 157 | M & L For One light point controlled by one switch with PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq. mm size drawn through and including stove enamelled steel conduit of suitable size concealed in wall and open conduit on ceiling and all accessories, fire resistant, ISI Marked including connecting with flame proof rotary type switch, including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq.as earth continuity conductor and making good the disturbed surfaces of walls/floors/ceiling etc all as specified and directed. |
| 158 | Same as per itern No 157 but One Cieling fan point controlled by one switch all as specified and directed. |
| 159 | Same as per itern No 157 but with cable 4 sqmm for One 3/5 pin socket outlet 16 amps on the independent board. all as specified and directed. |
| 160 | S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified and directed. |
| 161 | S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth all as specified and directed. |
| 162 | S&F CIMFR Certified flameproof LED battern ftg suitable for twin T8 tube of 20 watt. Recommended for Gas/Vapor group of IIA & IIB and one 1 & 2, IP65 Protected all as specified and directed. |
| 163 | M&L For One light point controlled by one switch with PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq. mm size drawn through and including PVC conduit of suitable size concealed and all accessories, fire resistant, ISI Marked including ISI marked standard pressed modular terminal box (recessed) with top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 15 sq.as earth continuity conductor and making good the disturbed surfaces of walls/floors/ceiling etc all as specified and directed. |
| 164 | Same as per item No 163 but One ceiling fan point controlled by one switch all as specified and directed. |
| 165 | Same as per item No 163 but One exhaust fan point controlled by one switch all as specified and directed. |
| 166 | Same as per item No 163 but One 3 pin socket outlet 5 amps on the independent board all as specified and directed. |
| 167 | Same as per item No 163 but one 3 pin socket outlet 5 amps on same board all as specified and directed. |
| 168 | Same as per item No 163 but with cable 2.5 sqmm for One 3/5 pin socket outlet 15 amps on the independent board all as specified and directed. |
| 169 | Supply and fix Modular switch 1 way 6A/10A. 1 module all as specified and directed. |
| 170 | Supply & Fix Modular switch 1 way 16A, 1 module all as specified and directed. |
| 171 | Supply and fix Socket, 6A-2/3 pin combined 2 module all as specified and directed. |
| 172 | Supply and fix Socket 6A/16A-2/3 pin combined 2 module all as specified and directed. |
| 173 | S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body, 65 x 50mm, 3. terminals all as specified and directed. |
| 174 | S&F Modular stepped type electronic Fan step regulator, 120W-2 module all as specified and directed. |
| 175 | Supply and fix LED tube light fitting of 20 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt including dismantling old one all as specified and directed. |
| 176 | Supply and fix LED tube light fitting of 10 watt, extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt including dismantling old one complete all as specified and directed. |
| 177 | M&L for sub main wiring with 4 runs of single core 6 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 2 runs of 4 sqmm multistranded insulated copper conductor cable as earth continuity conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required including dismantling old one. Note 4 Runs of PVC wires of 6 sqmm and 2 run of 4 sqmm earth wire and one run conduit will be measured as one unit) complete all as specified and directed. |
| 178 | M&L for submain wiring with 4 runs of single core 4 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith one runs of 4 sqmm multistranded insulated copper conductor cable as earth continuty conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required including dismantling old one. Note: 4 Runs of PVC wires of 4 sqmm and one run of 4 sqmm earth wire and one run conduit will be measured as one unit). |
| 179 | M&L submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 1 runs of 4 sqmm multistranded insulated copper conductor drawn through and including PVC conduit of suitable size on surface/recessed as required. Note 2 Runs of PVC wires of 4 sqmm and 1 run of 4 sqmm earth wire and one run conduit will be measured as one unit. |
| 180 | S&F sheet metal enclosure for MCCB DB Triple pole and neutral 4 ways, 415 volts with 250 Amps rated bus bar, double door including dismantling old one all as specified and directed. |
| 181 | S&F sheet metal enclosure for MCB DB Triple pole and neutral 4 ways, 415 volts with 200 Amps rated bus bar, double door including dismantling old one all as specified and directed. |
| 182 | Same as per item No 181 But for 240 V SPN 8 way all as specified and directed. |
| 183 | Same as per item No 181 But for SPN 4 way all as specified and directed. |
| 184 | Supply & Fix MCCB 415V, 50 HZ, 200 Amps, 4 pole of breaking capacity 36 KA with adjustable thermal magnetic release setting including dismantling old one all as specified and directed. |
| 185 | Supply & Fix MCCB 415V, 50 HZ, 160 Amps, 4 pole of breaking capacity 36 KA with adjustable thermal magnetic release setting including dismantling old one all as specified and directed. |
| 186 | S&F Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 63A including dismantling old one all as specified and directed |
| 187 | Supply and fixing 415V 10KA "B" curve miniature circuit breaker (MCB) of TPN 40 to 100Amps current carrying capacity in the DB complete with connection testing and commissioning including dismantling old one all as specified and directed. |
| 188 | Supply and fixing amp rating 240V, 32 Amps, 10KA, "C" curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning including dismantling old one all as specified and directed. |
| 189 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including dismantling old one all as specified and directed. |
| 190 | Taking down ceiling fan after disconnecting electric connection, sealing cable end, dismantling blades and removing fan and blades to store all as specified and directed. |
| 191 | M & L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as specified and directed. |
| 192 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed. |
| 193 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 380mm sweep with, blades, and frame and louvers all as specified and directed. |
| 194 | Supply & Fix exhaust fan, steel body AC single Phase 230 V of size 300m sweep with, blades frame and louvers. all as specified and directed. |
| 195 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm all as specified and directed. |
| 196 | Supply and fix All in One Solar Street Light 15 watts made with High Efficiency- Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially progrmmed to automatically control the dimming and brightness of light, which increases the backup time all as specified and directed. |
| 197 | M & L for Earthing complete with GI Steel earth plate electrode 600 × 600 × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground leve) earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers, with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth wire of size 4 mm, dia by means of bolts, nuts check soldered and revetted to earth plate. Earth wire will be protected by using 15mm dia bore GI pipe light grade. The earthing includes PCC Pitchamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance no less than 50 mtrs etc complete all as shown in electrical plate No. 3 of SSR Part-1 2009.connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
