|
| 1 | Civil Items |
| 2 | Dismantling roofinga) 2nd class mud roofing( CSR Item No. = 8.8b) |
| 3 | Dismantling brick work tile masonry or tile lining.(In cement) CSR Item no. 8.5b( CSR Item No. = 8.5b) |
| 4 | Removing R S beams from structures or truses.( CSR Item No. = 8.25) |
| 5 | Dismantling wood work from roof. ( CSR Item No. = 8.9) |
| 6 | Dismantling concrete or precast concrete. e) Reinforced cement concrete( CSR Item No. = 8.6 e) |
| 7 | Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base.( CSR Item No. = 8.17) |
| 8 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below. Doors of area 3 sqm and below. (CSR item no. 8.26a) |
| 9 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below. Windows of area 3 sqm and below. (CSR item no. 8.26b) |
| 10 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below. Clestorey window of area 3 sqm and below. (CSR item no. 8.26c) |
| 11 | Racking of joints in lime or cement, mortar and preparing the surface for repointing or re-plastering including disposal of rubbish to the dumping ground within 50m lead (excluding the cost of scraping of plaster and re-plastering).(AOR) |
| 12 | Scraping of (c)Cement Plaster( CSR Item No. = 8.31 ( C )) |
| 13 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcementcentring and shuttering in super structure ( CSR Item No. = 10.21) |
| 14 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.( CSR Item No. = 9.8) |
| 15 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, forR.C.C works, where not including in the complete rate of RCC including bending and placing in position complete( CSR Item No. = 18.18) |
| 16 | Providing and laying vitrified floor tiles of different sizes in light color shadesmade using double charged technology(thickness to be specified by the manufacture) with water absorption\"s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on 20mm thick cement mortar 1;4(1 cement ;4 fine sand ) complete. (Design is homogenous throghout the tile body).( CSR Item No. = 14.113(a)) |
| 17 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 300 x 450 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (based on CSR item 14.143) ( CSR Item No. = 14.126) |
| 18 | Anti-skid floor tiles 10mm thick 300x300mm (fully vitrified) in flooring skirting and dado in 12.5mm thick cement plaster 1:3 base and jointed with whit cement slurry in joints including corners, angles and beading.( CSR Item No. = 14.72) |
| 19 | Pink Marble tiles of Makrana & Adanga flooring 15 mm 20 mm thick of various sizes over 12.5 mm thick base of cement mortar 1:3 laid and jointed with white cement slurry mixed with pigment to match the shade of Marble including rubbing and polishing.( CSR Item No. = 14.74(V) b) |
| 20 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. ( AOR) |
| 21 | 12.5 mm thick cement plaster 1:5 ( CSR Item No. = 15.10) |
| 22 | 20mm thick cement plaster 1:5 in two coat work ( CSR Item No. = 15.21) |
| 23 | Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.( CSR Item No. = 13.45) |
| 24 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. ( CSR Item No. = 13.55) |
| 25 | Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)( CSR Item No. = 13.74a) |
| 26 | Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.( CSR Item No. = 13.75a) |
| 27 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish( CSR Item No. = 16.65) |
| 28 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.( CSR Item No. = 16.1) |
| 29 | Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm ( CSR Item No. = 16.59) |
| 30 | Carriage of material (Earth, Surkhi. Sand, Earth, Fly Ash. Bajri. Ballast. Stone Boulders. Kankar and Building Rubbish, Earth)includingloading and unloading (metaled roads)With lead up to 1.00 km( CSR Item No. = 5.2(i) &4.2 (a)) |
| 31 | Carriage of Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone Boulders, Kankar and Building Rubbish, Earth.0.5 to 1.0 km including Stacking within 15 metres of the unloading points into stacks of specified sizes.(V) Timber ( CSR Item No. = 5.2 (v) & 4.2a&4.28) |
| 32 | Carriage of MS Bars, Steel, Coal, Lime, GI pipes and specials, CI manhole covers, steps and other castings and ancillary miscellaneous items like lead, hemp yarn etc. 0.5 to 1.0 kmincluding Stacking within 15 metres of the unloading points into stacks of specified sizes( CSR Item No. = 5.2(IV) 4.9 &4.34) |
| 33 | Carriage Tiles (30.48 cm x 15.24cm x 5.08cm)including loading, unloading including Stacking within 15 metres of the unloading points into stacks of specified sizes With 1 km. lead ( CSR Item No. = 5.2(vii) 4.4(i) ) |
| 34 | Scraping e) bricks dismantled from brick work in lime or concrete ( CSR Item No. = 8.31e) |
| 35 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation ( CSR Item No. = 6.6) |
| 36 | Cement Concrete 1:8:16 with 40mm gauge stone aggregate.( CSR Item No. = 10.6 b ii) |
| 37 | Conglomerate floor 50mm thick cement concrete topping 1:2:4. ( CSR Item No. = 14.7) |
| 38 | Floating coat of 1.5mm thick neat cement laid in one operation to the topping. ( CSR Item No. = 14.4) |
| 39 | Providing & fixing glass strips 4mm thick in floors. a) 50mm wide( CSR Item No. = 14.105a) |
| 40 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973c (iv) Decorative with teak facing on both sides edges lipped with teak with laminated core( CSR Item No. = 17.27 b(iv)) |
| 41 | Deodar wood doors shutter with 12mm thick phenol Bonded BWP ply (Anchor Kit ply, Nova teak , or National or any other ISI approved quality) I/C hinges, screws, chocks & cords etc. Complete fixed in position (Single leaf) a) Phenol Bonded Ply Panel (II)35mm thick ( CSR Item No. = 17.10 (Ix) a (II)]) |
| 42 | Kail wood doors shutter and window shutter panelled, glazed or glazed and panelled including hinges screws chokes cleats and cords etc. complete flied in position (Single Leaf) b) 35mm thick ( CSR Item No. = 17.10 (I) a ii) |
| 43 | Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf) a) 35 mm thick ( CSR Item No. = 17.11 (I) i) |
| 44 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. (a) with special quality paint( CSR Item No. = 16.16) |
| 45 | Painting two coats excluding prming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete. a) with special qualit paint ( CSR Item No. = 16.17) |
| 46 | Terracing consiting of tile 22.86x 11.43x 3.83 cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.( CSR Item No. = 13.13i) |
| 47 | Scraping (g)Tilesdismantled from the work in lime or cement.( CSR Item No. = 8.31 (g)) |
| 48 | Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete. ( CSR Item No. = 17.41 (b)) |
| 49 | Providing and fixing 0.50mm thick aluminium sheet including cost of necessary fittings i.e. screws, etc. complete.( CSR Item No. = 17.44) |
| 50 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(A) 300mmX16mm( CSR Item No. = 17.49 (A)) |
| 51 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)For shutter area above 0.50 sqm. ( CSR Item No. = 17.23 (ii)) |
| 52 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.(a) Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter( CSR Item No. =18.24a) |
| 53 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. (c) Doors and windows frame of size 151mm x60mm with 35mm wide double rebate weighing 3.95 kg per meter. ( CSR Item No. =18.24c) |
| 54 | Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects.( CSR Item No. = 18.27) |
| 55 | Water Supply and Sanitation Items |
| 56 | Dismantling sanitary fixtures such as European/Indian/Orissa W.C., PVC/ China ware cistern, Wash hand basin, Urinal Pot, Sinks and CP fittings and disposal of dismantled material within a distance of 100 mtr.complete in all respect as required by EIC. a) European Indian/Orissa W.C.( CSR Item No. = 30.88 a) |
| 57 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings compete in all respect. a) 15mminternal diameter pipe line( CSR Item No. = 28.63.a) |
| 58 | Providing, laying, jointing, fixing & testing ISI marked G.I. pipe (as per IS 1239) B-Class premium make such as (Jindal, Hisar) including cost of specials (such as tees, bends, sockets, elbow etc.)painting with anti-corrosive bitumastic paint, testing, cutting, threading inside building complete a)15mm dia i/d( CSR Item No. = 28.35 a) |
| 59 | Providing, fixing and jointing G.I. union coupling (of approved make with the approval EIC) as per IS1879 in G.I. pipe lines compete in all respect.a) 15mm i/d GI Union( CSR Item No. = 28.40 a) |
| 60 | Providing & fixing of J-hooks( MR) |
| 61 | Cutting chase in brick wall in cement or in floor for embedding GI or CI pipe line and making good the same to its original condition. Size 75mm x 75mm ( CSR Item No. = 30.85 a) |
| 62 | Cutting chase in brick wall in cement or in floor for embedding GI or CI pipe line and making good the same to its original condition. Size 75mm x 50mm ( CSR Item No. = 30.85 c) |
| 63 | Providing and fixing in position hinaware European Indian Orisa water closet size 580mmof approved make( to theapproval of the EIC)consisting of 10 ltr.PVCflushing cistern including cost of PVC long bend32mm diacomplete in all respect and to the entire satisfaction of EIC)( CSR Item No. = 30.2) |
| 64 | Providing & fixing in position 15mm I/d bib cock of approved make ( to the approval of Engineer-in-Charge) complete in all respect. Brass Bib cock/stop cock 15mm x 400gm( CSR Item No. = 30.65A (iv)) |
| 65 | P&F in positionS.S. grating with frame of approved make (to the approval of Engineer-in –Charge)complete in all respect)( CSR Item No. = 30.80) |
| 66 | P&Fin positionCPbrass overhead shower 1 flow with shoerarm with 15mm i/dinlet of approved make ( to the approval of EIC) complete in all respect( CSR Item No. = 30.56-A) |
| 67 | P&F in position towel rails/ring of approval make (to the approval of EIC) fixed in with rawl plugs embedded in walls with bras screw complete in all respect. (a) C. P. brass towel rails size15mm dia 600mmlong. ( CSR Item No. = 30.58 (a)) |
| 68 | Cuttingholes upto 23cmsquare through B.B. in cement walls or stone masonary wall in cement for pipesand making goodthe same and finishing according to existing finish where requiredThrough wall 22.86 cm thick( CSR Item No. = 28.56 (b)) |
| 69 | Providing & fixing in position stop cock/angle valve of approved make (to the approval of EIC) complete in all respect.b) CP brass 15mm concealed stop cock wit flange( CSR Item No. = 30.66 (b) ) |
| 70 | Providing & fixing in position stop cock/angle valve of approved make (to the approval of EIC) complete in all respect. A) CP brass 15mm angle valve without flange( CSR Item No. = 30.66 (c) ) |
| 71 | P&Fin position CPaluminium khuntiof approved maked ( to the approval of EIC)fixed into wallwith cp brass screws and rawl plugs etc. complete in all respecte)aluminium khunti with 4 pegs. ( CSR Item No. = 30.63-e) |
| 72 | Providing and fixingin positionstainlesssteel sink of approv(to the approval of Engineer in charge) 1mm thick,grade 304(18/8) with waste coupling complete in all respect.(a)Rectangular sink with deluxe border single bowl overall size 700mmx555mmx230mm( CSR Item No. = 30.47 a ) |
| 73 | Electical items |
| 74 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (With fan box)( CSR Item No. = 34.05(i) (b)) |
| 75 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring light point( CSR Item No. = 34.05(ii) ) |
| 76 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring call-bell point( CSR Item No. = 34.05(iii)) |
| 77 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring 6 Amp. Plug control comprising wall socket point( CSR Item No. = 34.05(v) ) |
| 78 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring 16/20Amp. power plug control point( CSR Item No. = 34.05(vi) ) |
| 79 | MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-(ii) MCB Single Pole 6-32amp. (10kA, Curve-C)( CSR Item No. = B) |
| 80 | MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-(iii) MCB Single Pole 40amp. (10kA, Curve-C)( CSR Item No. = C) |
| 81 | SHEET METAL IRON CLAD CHANGEOVER SWITCHES: supply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications:-(i) ICDP Changeover Switch 32amp., 415volts( CSR Item No. = 34.19(i)) |
| 82 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB\"s/ RCBO\"s/ RCCB\"s:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-(ii) SP&N Double Door Distribution Board 8 way each( CSR Item No. = 34.17 (ii)) |
| 83 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 4sq.mm (Un-sheathed)( CSR Item No. = 34.09(iv)) |
| 84 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 2.5sq.mm (Un-sheathed)( CSR Item No. = 34.09(iii)) |
