}

Tender For Special Repair Of 10 X Shutter Of Certain Building In Ad Regiment And Electrical And Mechanical Works At Mh And Ad Record Bldg Under Ge I Gos, Ganjam-Odisha

Military Engineer Services-MES has published Tender For Special Repair Of 10 X Shutter Of Certain Building In Ad Regiment And Electrical And Mechanical Works At Mh And Ad Record Bldg Under Ge I Gos. Submission Date for this Tender is 02-02-2024. Building Work Tenders in Ganjam Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

41762049
Tender For Special Repair Of 10 X Shutter Of Certain Building In Ad Regiment And Electrical And Mechanical Works At Mh And Ad Record Bldg Under Ge I Gos
Open Tender
Indian
Odisha
Ganjam
02-02-2024

Tender Details

Special Repair Of 10 X Shutter Of Certain Building In Ad Regiment And Electrical And Mechanical Works At Mh And Ad Record Bldg Under Ge I Gos

Key Value

Document Fees
INR 500 /-
EMD
INR 88000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:SPECIAL REPAIR OF 10 X SHUTTEROF CERTAIN BUILDING IN AD REGIMENT AND ELECTRICAL AND MECHANICAL WORKS AT MH AND AD RECORD BLDG UNDER GE (I) GOS.
Sl. No. Item Description
1M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:4 including demolation of brick work or stone/ boulder masonry, built in cement mortar completed all as specified and directed.
2M & L for Cutting holes in brick walls (Exc. half brick but not exc.one brick ) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
3M&L, 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces,finished even and smooth without using extra cement complete withpreparation of new decoratedsurfaces of wall applying two coat of cement base paint complete all speciified and directedall as specified.
4S & F in 1.00 mm thick mild steel rolling shutter strips duly pressed on both ends of vertical sides for interlocking locks for the required length of existing shutter as directed by Engg-in-Charge
5S&F heavy duty (C-class) pipe required to roll the rolling shutter over it of dia as required at site exc 50mm but nexc 100mm including necessary drilling , making key by shapers and nuts, bolts, washers as requird
6S&F in Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
7S&F in Ball bearing for rolling shutters complete all as specified and directed.
8M & L for preparation of new steel/iron surfaces exceeding 10cm width or girthand applyingtwo coats of synthetic enamelled paint over a coat of red oxide primer including complete all as specified and directed.
9M&L for complete removing of old decoratedsurfaces of wall applying two coat of cement base paint and one coat primer complete all speciified and directedall as specified.
10Taking down and refixing in the same opening steel rolling shutter including oiling and greasing to required necessary fitting to functionall shutters as required bush, Spring. MS pipe , rod .lock. ball bearing,top cover, anchoring rod, hasp and staple andpush pull or gear operating system, bevel gear box and crank handleetccomplete all as specified.and directed.(area of rolling shutters exc 6 sqm but n. exc. 12 Sqm each ) (Note:-Necessary constituent items required during repair of rolling shutter shall be paid seperately in item No. 05,06,07,08 as given above .)
11M & L for preparation of old steel/iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamelled paintincluding complete all as specified and directed.
12Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removingmaterials to store forkeeping in safe custody or for taking credit (credit for above items should be made for conditions separately )and including making good the disturbed surfaces to match with existing surface and colour shade with proper puttyfor smooth finishing without undulations complete all as specified and directed.
13Materialand labour for one light point controlled by one 10 Amps switch one way point wiring with 1.5 sqmm complete suitable circuit wiring from distribution board to control switch board PVC insulated wires, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed,multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawn through and including PVCConduit 20 mm dia medium grade(MMS) andincluding cutting, chasing work at any height and all accessoriesconcealedinwalls / roofs / floors / ceiling etc. flush mountingMS box with top,bottom,side/back wall knockout for conduitentry from any direction suitable for fixing of andincludingwhite/Silver/Dark bronzecolour modular blankingplate as per number of switch modules flush mountedfor fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colourmodular plate cover of required modules andincluding 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with 3mm putty and necessary distamber for smooth finishing complete all as specified and directed. (Note:- Allnecessary accessories such asmodular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height/places(incl stone bldgs) it shall be deemed in to included in quoted rate only.) Make for item No 15 to 24 :- (1).PVC Copper conductorcable FRLSH type :-Finolex / Havells / RR Kabel / Polycab . (2) PVC conduit (MMS)/PVC Casing & Caping & AccessoriesISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd
14All as per item No. 13 above, but onefan point controlled by one 10 Amps switch and oneregulator.
15All as per item No. 13 above, but oneexhaust fan point controlled by one 10 amps switch .
16All as per item No. 13 above, but one 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .
17All as per item No. 13 above, but one 5 pin 6 amps socket point controlled by one 10 amps switch on same board .
18All as per item No. 13 above, but one bell/buzzer point controlled by onebell push.
19All as per item No. 13 above, but one light point controlled by two 2 way switches/bed switch point
20All as per item No.16 & 17 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all for one 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switchon independent board.
21All as per item No.16 & 17 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all for one 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.
22All as per item No. 16 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.
23Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Markedcomplete all as specified and directed.
24Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC,ISI Markedcomplete all as specified and directed.
25Supply & fixing modular type bell push10 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.
26Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V, AC, ISI Marked complete all as specified and directed.
27Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,ACISI Marked complete all as specified and directed.
28Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,ACISI Markedcomplete all as specified and directed
29Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 moduleISI Marked complete all as specified and directed.
30Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps,ISI Markedcomplete all as specified and directed.
31Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality,ISI marked, as approved type complete all as specified and directed.
32Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbscomplete all asspecified and directed.
33Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed. Make for item No 25 to 35:- (1) Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AABas existing type and as approved (2) PVC conduit (MMS)/PVC Casing & Caping & AccessoriesISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd
34Supply & fix20 watt LED light fitting pride essential bright linea white lighting, high quality materials andslim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/wand including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nosand connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips
35Supply and fixing 20 watt LED batten nicolaus glamtubeintegrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :- Havells or equivalent make in Crompton/Philips
36Supply and fixing 36 wattsLED supernovalight fitting high wattage completeLED lighting with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed.Make :- Havellsor equivalent make in Crompton/Philips
37Supply and fixing LED 20 watt,6500K, Pride plusinverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/wand including providingpre-wired, and PVC/Wooden round or square blocks -02 Nosand connected with LED fitting to ceiling roseand removing old unserviceable fitting complete all as specified and directed. Make :-Havells or equivalent make in Crompton/Philips
38Supply and fixing 20 watts LEDAustra mirror smart light fitting one feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmentalfriendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :-Havells or equivalent make in Crompton/Philips
39Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2"x2" LED 36 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can besuspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fittingand including removing old unserviceable item complete all as specified and directed.Make:- Havells or equivalentin Crompton/Philipsany approved make
40Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2"x2" LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can besuspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fittingand including removing old unserviceable item complete all as specified and directed.Make:- Havells or equivalentin Crompton/Philipsany approved make
41Supply and fixed in repairs recess mounting 2"x2" LED 40/42 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can besuspended with provided kit and including connecting up with ceiling rose to fittingand including removing old unserviceable item complete all as specified and directed complete all as specified and directed. Make:- Havells or equivalentin Crompton/Philipsany approved make
42Supply and fixedelegantly designed sleek surface mounting pressure die-cast aluminium in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver withglare free symmetrically illumination 12watt LED light fitting and including providing internally prewired,connector incl providing kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fittingand including removing old unserviceable item complete all as specified and directed.Make:- Havellsor equivalentin Crompton/Philipsany approved make
43Supply only, fixed in repairs flexible neo LED strips 24 watt 6000k ,240Volts ,standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required andincluding all connected accessories suitable for proper fixing as per site requirement and removing old unserviceable fitting complete all as specified and directed.Make:- Havells or equivalentin Crompton/Philipsany approved make
44Supply and fixed in repairs LEDbldg secruity light fitting of capacity 45 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells or equivalent make in Crompton / Philipsas approved
45Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirementwith hot or coldbending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixedonwall surfaces and including providingsuitable fabricate galvanised flat ironclamps of 30X6 mm thick-02 Nossuitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.Make of GI pipe- Jindal/Tata/Bansal
46S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired ofluminaires including LED light driver and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed.Make:- Havellsor equivalentin Crompton/Philipsany approved make
47Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs aslight source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 60-70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells or equivalentin Crompton/Philipsany approved make
48Supply & fixingand sheet metal enclosure, double door ,415 volts AC,VTPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:-Legrand or equivalent in Hagar/Schneider /Havells.
49Supply & fixing andsheet metal enclosure, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand or equivalent makein ABB/Havells
50Supply & fix and in repair sheet metal enclosure 240 volts AC,SPNdistribution board 12 wayfor flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP,and MCB SP as outgoing and complete connecting cable linkswith top and bottom removable gland plates withIP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coatall as specified and as directed. Make:- Legrand or equivalent in Hagar/Schneider / Havells.
51Supply & fix andsheet metal enclosure, double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP,and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand or equivalent in Hagar/Schneider / Havells.
52Supply & fixMCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.
53Supply & fix and MCB SPN 32 to40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.
54Supply & fix and MCB SPN 40 to63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. Note for item No.50 to 56- MCCB/MCB DBs and MCBs/MCCBs are used same make only
55M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
56M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn drawnthroughand including PVC conduit in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etcand including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC casing caping shall be measured as one unit.
57M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring andmaking good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
58M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. Make for item No 57 to 60 :- (1)PVC Copper cable -Finolex/Havells/RR Kabel/Polycab (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza Note :- Making good the disturbed surfaces to match with existing surface and colour shade with 3mm putty and necessary distamber for smooth finishing and to match with existing surface and including colour shadecutting & cheasing work rate will be deemed into quoted rate only.
59Supply and fixsuitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20Amps, 10KA "C "series, 230 Volts,50Hzsuitable for AC"s/Geysers complete all as specified and directed.Make:- Legrand / Hager/ Havellsor as equivalent approved make
60Supply and fixMCCB,100 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washersand including removing old unserviceable itemcomplete all as specified and as directed. Make:- Legrand/ABB/Schneider/ Havells or equivalent
61Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing 230 V, 1200mm sweep brushless direct currentsmart and decorativetype ceiling fan complete withthree blades,down rods, smart electronic regulator, metalic finish, dust resistant andconnected accessories, . Min air delivery 210 CFMwith brushless direct current copper winding motor,colour as per requirement at site incl writing MES No on ceiling fan with synthetic enamel paint complete all as specified and directed.Make:-Atomberg ( Renesa ) or equivalentin Havells/Orientas approved make
62Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing 230 V, 600 mm sweep brushless direct currentsmart and decorativetype ceiling fan complete withthree blades,down rods, smart electronic regulator, metalic finish, dust resistant andconnected accessories, . Min air delivery 210 CFMwith brushless direct current copper winding motor,colour as per requirement at site incl writing MES No on ceiling fan with synthetic enamel paint complete all as specified and directed.Make:-Atomberg ( Renesa ) or equivalentin Havells/Orientas approved make
63Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with bladesand including providing insect protection net frame , with louvers and frameincl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make
64Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixingexhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 300 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make
65Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody andSupply anf fixingexhaust fan made of sturd engineering plasticPVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make
66Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipeof 15 mm diafrom earth electrode up to test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required valueincluding removing old item completeall as specified and directed.
67Supply and fixPVC casing and caping of size not less than 25X25 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,TV Cable wires etc along thewall/ceiling/roof etc complete all as specified and as directed.
68Supply and fixPVC casing and caping of size not less than 50X50 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,Cable wires etc along thewall/ceiling/roof etc complete all as specified and as directed.
69Supply and fixPVC casing and caping of size not less than 50X100 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,Cable wires etc along thewall/ceiling/roof etc complete all as specified and as directed.
70S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.
71Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providingnut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and properaluminium frameto avoid insect protection fix at inner surface of wall andmaking good the disturbed surface area complete all as specified and directed.
72Supply and fixingsheet steelenclosure in CRCA sheet suitable for MCCB100Ampsto 160Amps,4pole,415Volts,16/18KA MCCB and including providing necessary nut,bolts and washers and fixed in wall concealed/surface as site conditon complete all as specified and directed.make:-Havell/Legrand/Indoasian/ABB
73Supply and fix and in repair aluminium busbar chamber in sheet steel enclosure of current rating capacity 160 amps,4 way,415 volts with necessaryfixing arrangements such as holefastners/screws, bolts,nuts and washers etc and including removing old unserviceable item from existing loaction and making good the distrubed surface area and complete all as specified and as directed. Make:- Havells/Standard/Indo Asian/Hager as approved
74Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 300 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed.Make:- Havells/Finolex/Polycab/Universal
75Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed.Make:- Havells/Finolex/Polycab/Universal
76Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed.Make:- Havells/Finolex/Polycab/Universal
77Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 70 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed.Make:- Havells/Finolex/Polycab/Universal
78Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed.Make:- Havells/Finolex/Polycab/Universal
79Supply and fix20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protectionand providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed. Make :-Crompton or equivalent in Havells / Bajaj /Philips as approved
80Supply and fix40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protectionand providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed. Make :-Cromptonor equivalent in Havells / Bajaj /Philips as approved
81Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.
82Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portioncoping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washingmade by the contractor costdeemed intoquoted rete only.
83Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.
84Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all asspecified and directed.
85Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed
86Removing excavated soil not exc50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed
87M & L for brick sub class "B" 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cablecomplete all as specified and directed.
88Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST
89Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST
90Supplyand fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;1.0 sqmm and including electric connection from ceiling fan to ceiling roseand including removing old unserviceable item complete all as specified and directed. Make:-Havells/Finolex/Polycab
91M&L for old size brick work with fly ash bricks straight or curved on plan exc6m mean radius in CM 1:6 complete all as specified and directed.
92M&L forrendering 15mm thick on fair face of brick works in CM 1:6 finished evenandsmooth with out using extracement complete all as specified and directed.
93M&L for preparation of new plastered of wall/ceiling or concrete surface of walls or concrete and applying two coats of 3 mm thick wall care puttycomplete all as specified and directed
94M&L for preparation of old decorated surface of wall and apply two coats of white washcomplete all as specified and directed
95M&L for applying two coats of oil bound distember on wall or concrete over a coat of primer on prepared surfaces including,rubbing with sand paper after complete removal of existing treatment complete
96Supply and fixed in repairs at suitable for surface/ recess mounting (as per site requirement) 2"x2" LED 40 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can besuspended with provided kit and including connecting up with ceiling rose to fittingand including removing old unserviceable item complete all as specified and directed complete all as specified and directed. Make :-Crompton/Havells/Philips
97Supply and fixing decorative LED 7.5/9 watt light fitting, sparkler WL 1LS E27 BRS, minimalistic design of wall lights without shade in different finish and design in ,recommended to use with energy savingand including providing 7.5 /9 watts LED filament lamps,220 Volts ACwith high efficiency, soft glare free light complete with LED lamp,holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :-Havells or equivalent make in Crompton/Philips
98Supply and fixing decorative LED 9 watt decorative, globe type,high quality ploycarbonate materials suitable for 9 watt LED lamp ,B22,220 Volts ACwith high efficiency, soft glare free light complete with LED lamp,holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :-Havellsor equivalent make in Crompton/Philips
99Supply and fixing 12 wattLED panel type slim, compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specifiedMake :-Crompton/Havells/Philips
100Supply and fix LED secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton or equivalent make in Havells / Philipsas approved
101S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired ofluminaires including LED light driver and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. Make :-Havells or equivalent make in Crompton/Philips
102M & L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring andmaking good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
103Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make
104Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody andSupply anf fixingexhaust fan made of sturd engineering plasticPVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make
105Taking down old unserviceable wall mounted fans of any type/sweep from work site and deposit to MES store yard for safe custody andSupply and fix wall mounted fan 230Volts, single phase, oscillating type, 450 mm sweep, Hi-speed,low noise, heavy dutywith blades and outer cover and including providing hanging hook and connected items complete all as specified and directed.Make:- Havells/Usha/Crompton
106Taking down old unserviceable air circulators fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix air circulator heavy duty,metal body type fan 230Volts single phase oscillating 500 mm sweep and all connected accessories and including providing hanging heavy duty GI plate/clamp, nuts, bolts and washers complete all as specified and directed.Make:- Almonard/Havells/Usha/Crompton/Polar
107Supplylaying and testingPVC Insulatedarmoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 95 sqmm 3.5 core all as specified and directed.
108Supplylaying and testingPVC Insulatedarmoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 25 sqmm 4 core all as specified and directed.
109Supplylaying and testingPVC Insulatedarmoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 35 sqmm 3.5 core all as specified and directed.
110Supply and providingriver sand for cushioningwith dry cleansand 15 cm below cable and 8 cm above theunder ground cables and necessary fillings in thetrenches and punning to provide required cover complete all as specified and directed.
111Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for makingfoundation/base plinth and pole coping, foundation etc including necessary use and waste of form work complete all as specified and directed.
112Boaring holesexcavation by trencheless technology across the road,pavement,hard standing by trenche technology using ultra sounding technique and necessary machine and necessaryT&P andincluding providingcable protection HDPE ring pipe 100MM dia heavy dutysuitable for 0.4 mpa working for passing of UG cable and without any damages the existing road surfaces and any other UG cables, signal cables, OFC cables and any other assets complete all as specified and as directed. Note:- During excavation/trencheless excavation any other assetes damagedon site the contrator should be responsible for the making good and including replacing the new material/ item incl labour& repair cost etc with out any extra cost from the department.
113Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed .Make: Tata/Swastik/Jindal
114M&L for maint free Chemical earthing consisting of single pit of minimum 3 mtr depth filled with earth enhancing power compound of minimum 25Kgs, with Earthing Electrode of size 80mm dia, length 3000mm including 03 Nos Earthing electrodes, test link box, 3Nos HDPE Earth pit chamber cover, inxuding suitable size oflugs with insulator complete all as specified and directed.(Make: Techno Power / Forecast or equivallent)
115M&L forESE Type lightning Arrester with non electgric early streamer emission standardized according to norms UNE 21.186 and NFC 17.102 duly tested and certified & METU Turkey having coverage areaof 107 Mtr (Level 4) having lightning charge capacity 300 KA with triggering tme of 60 micro seconds early warning time inflow comes with 20 years warranty complete all as specified and directed. (Make: Paratonex Sira 60/ Forecast or equivallent)
116M&L for High Mast consisting ofGI Mast 5 mtr lengthheavy duty octognal type 100mm dia at bottom and 80 mm dia at top,with flange at bottom for mounting of ESE Lightning Arrester and necessary steel wire rope anchorages as per site requirement,nuts,bolts and washers etc and including providing suitable PCC foundation with grouting nut,bolts and washers etc complete all as specified and directed. (Make: Tacho Power / Forecast or equivallent)
117M&L for Lighning strike counter complete all as specified and directed. (Make: Turkey (Paratonex) / Forecast or equivallent)
118M&L for PVC insulated copper unsheathed single core 10 sqmm multi stranded copper conductor cable as earth continuity conductor complete all as specified and directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail