Tender For Special Repair To Bldg No P-32 (Offers Md Accommodation) At Althino, Panaji Goa., panaji-Goa

Tender For Special Repair To Bldg No P-32 ( Offers Md Accommodation ) At Althino, Panaji Goa. ; 1 Taking Down Cement Plaster On Wall Built In Cement Or Cement Mortar Raking Out Joints, Hacking For Key, Scrubbing Out With Water Etc. Complete. 2 Demolition Of Brickwork Or Stone / Boulder Masonry, Built In Cm Including All Quoins Arches Pillars Etc. 3 Material And Labour For Brick Work With Sub Class ‘B’ Bricks Straight Or Curved On Plan Exceeding 6M Mean Radius With Old Size Bricks Built In Cement Mortar 1:4 Complete All As Specified And As Directed. 4 M & L Rendering 15 Mm Thickon Stone Masonry Surfaces Or Surface Other Than Fair Face Of Brickwork Or On One Side Of Lathing In Cm 1:6Without Using Extra Cement. 5 M & L Rendering 15 Mm Thick On Stone Masonry Surfaces Or Surface Other Than Fair Face Of Brickwork Or On One Side Of Lathing In Cm 1:4 Without Using Extra Cement With Using Water Proofing Compound.Note :- Water Proofing Compound Will Be Measered Seperatly. 6 M&L 10Mm Thick Plastering On Fair Faces Of Bricks Or Concretesurfaces Finished Even And Smooth W / O Using Extra Cement In Cm1:3 On Ceiling 7 Supply Only Integral Waterproofing Compound. 8 M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50Gm / Ltr And Uv Resistance As Per Is 15489-2004, Alkali And Fungal Resistance, Dirt Resistance Exteriorpaint Of Required Shade ( Company Depot Tinted ) With Silicon Additives @1.43 Litre / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre / 10 Sqm Over 1Mm Thick Plaster Of Paris Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete All As Specified And Directed. 9 M&L For Complete Removal Of Existing Surfaces Of Walls And Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50Gm / Ltr And Uv Resistance As Per Is 15489-2004, Alkali And Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade ( Company Depot Tinted ) With Silicon Additives @1.43 Litre / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre / 10 Sqm Over Over 1Mm Thick Plaster Of Paris Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete All As Specified And Directed. 10 M&L For Complete Removal Of Existing Treatment And Applying Two Coat Of Oil Bound Distemper On Plastered Surfaces Ofwalls Including Providing And Applying 3Mm Thick Wall Care Putty On Wallthickness Over Plastered Surfaces To Prepare The Surface Even And Smooth Complete All As Specified And Directed. 11 M&L Applying Two Coat Of Oil Bound Distemper On Newly Plastered Surfaces Ofwalls Including Preparation And Including Providingapplying 3Mm Thick Wall Care Putty On Wall Over Plastered Surfaces To Prepare The Surface Even And Smooth Complete All As Specified And Directed. 12 M&L For Preparation Of Old Painted Wooden Surfaces Of Any Description Not Other Wise Described Over 10Cm Width Or Girth And Applying Two Coat ( Finishing Coats ) Of Synthetic Enamel Paint Complete All As Specified And As Directed By Engineer-In-Charge . 13 M & L Preparation Of New Wooden Surface And Applying Two Coats Of Synthetic Enamel Paints Over A Coat Of Pink Primer Of Any Description, Not Otherwise Described, Over 10Cm Width Or Girth. 14 M & L For Preparation Of Old Steel Surfaces And Applying One Coats Of Synthetic Enamel Paint On Surfacess Of Any Discription, Over 10Cm In Width Or Girth . 15 M&L Two Coat Vanish With Sizing, Wood Filler, Stain Surfaces Of Any 10Cm In Width Or Girth. 16 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) . 17 M&L Glazed Ceramic Coloured Designer Pattern Tiles 450Mmx 300Mmx7mm Thick On Vertical Surface Such As Skirt, Dado Etc Set And Jointed In White Colour Cement Including 10Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4. 18 Demolition Of Cement Concrete In Below Or Above Ground Floor And Paving N.Exc 15 Cm Thk ( Unreinforced ) For Plinth Protection & Foot Path. 19 M&L Cement Concrete Type B1 1:2:4 Using 20Mm Graded Stone Aggregate 25Mm Thick As In Flooring Etc. 20 M & L Coloured Non - Skid Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cementslurry And Pointed In White Or Coloured Cement To Match Incl 20Mm Th Screed Bed In Cm 1:6. 21 M & L For Virified Ceramic Tiles 10 Mm Thick Light Shade ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, Including 20Mm Thick Screed Bed In Cm 1:6. 22 M&L For 20Mm Thick Granite ( Of Any Type ) Work ( Table Rubbed And Polished ) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar ( 1:4 ) Including Pointing In White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Including 15Mm Thick Screed Bed In Cm 1:6. 23 M & L Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations. 24 M&L Machine Cut Kota Stone Slab Flooring 20Mm To 25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Including 20Mm Thick Screed Bed In Cm 1:6Complete. 25 M&L Machine Cut Kota Slab 20Mm To 25Mm Thick In Risers Of Step Skirting Dado Over Cement Screed And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishingincluding 10Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete. 26 M & L Cement Concrete Type C- 2, 1:3:6 ( 40Mm Graded Aggregate ) 75Mm Thick As In Sub Base. 27 M & L Chequered Cement Concrete Tiles 20Cm X 20Cm X 25Mm Thick, Set, Jointed And Pointed In Neat Cement Slurry In Floors With Grey Cement And Pigments Including 20Mm Thick Screed Bed In Cm 1:6. 28 M & L Pcc 1:3:6, Type C-2, 75Mm Thick As In Plinth Protection, Surface Finished Fair And Smooth Without Using Extra Cement. 29 Taking Down Chowkat With Shutter ( Without Taking Off Shutter From The Frame ) Area Exc 1.5Sqm But N Exc 4 Sqm Each. 30 Taking Down Chowkat With Shutter ( Without Taking Off Shutter From The Frame ) Area Exc 1Sqm But N Exc 2 Sqm Each. 31 Taking Down Shutter Of Any Description ( Aluminium / Wooden Door ) Exc 1 Sqm But Not Exc 2Sqm Each And Refixing In Same Opening . 32 Taking Down Shutter Of Any Description ( Aluminium / Wooden Window ) Not Exc 1 Sqm Each And Refixing In Same Opening . 33 Taking Down Shutter Of Any Description Exc 1 Sqm But Not Exc 2Sqm Each Etc. 34 S & F 1Stclass Soft Woodplain Solid Straight Chowkats & Frames Wrought, Framed, Rebated On The Solid Rounded Or Chamfered Put Together With Glue, Pinned At Joints. 35 Supply And Fix 35Mm Thick Factory Made 2Nd Class Hard Wood Plain Framed, Panelled Shutter ( Two Panel ) With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 ( Part- I ) , Kiln Seasoned And Chemically Pressure Treated. 36 S & F Second Class Hard Wood Factory Made Glazed And Skeleton Door Shutters 35Mm Thick, Open Rebated And Prepared To Receive Glass, Gauze, Etc Divided Into Squares With Plain, Chamfered Or Rounded Mitred And Rebated Sash Bars Any Number & Fitted With Cut And Mitred Beads For Securing Glass, Etc Sizes Of Members Of Shutters As Specified In Ssr Part-I 1991 Section 8 Clause 8.20 ( B ) 37 Supply And Fix Solid Pvc Door Frames Of Size 50Mm X 47 Mm Made Out Of 5 Mm Thick Plain / Printed Coloured Pvc Sheet Reinforced With Ms Square Tube All As Per Specification & Drg. 38 Factory Made Solid Pvc Moulded Door Shutter, 28 To 30 Mm Thick ( Stiles ) , With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Coloured Pvc Sheet On Front Face & 2Mm Plane Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing With Particle Board Core. 39 S & F 150 Mm Aluminium Handles, Cast Type Anodised 40 S & F 100Mm Butt Hinges For Windows Midium Weight, Cold Rolled Mild Steel And Fixed 41 S & Faluminium Anodised Barrel Tower Bolts150mm For Door Of Extruded Section And Fixed 42 S&F 300 Mm Long Aluminium Alloy, Anodised, Sliding Door Bolts With Hasp, Staple ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed. Bright Bolt Not Less Than 12 Mm Dia With And Including Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate Complete All As Specified. 43 Supply And Fix Mild Steel 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 44 S & Mortice Lock 2 Lever Brass, Vertical Type, Size 100 Mm 45 S&F In Repair Floor Door Stopper Aluminiumbody With Overall Length 140Mm 46 Supply And Fix Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) Work For Doors Windows Ventilators And Partitions ( Fixed Portions ) With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is 1285 Fixing With Dash Fasteners Of Required Dia And Size Including Necessary Filling Up The Gaps At Junctions I E At Top Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth Rust Free Straight Mitred And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing / Panelling C P Brass / Stainless Steel Screws All Complete As Per Architectural Drwings And The Directions Of Engineer-In-Charge. 47 S & F Power Coated Aluminium Window And Ventilator Shutters Fixed, Openable Or Sliding Type Without Sash Bar, Aluminium Section Weighing 0.55 Kg / M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws Etc. Complete All As Specified 48 S&F Aluminium Grills Dg-104 Of Deco Grill / Hindal 10 Mm Thick Diamond Shape With Aperture 7.5Cm For Windows 49 S & F Aluminium Alloy Wire Cloth, 0.45Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Aluminium Wire Staples As Repair. 50 S & F 4 Mm Thick Plain Sheet Glass Ordinary Quality Fix With Bead In Squaresn. Exc. 0.5 Sm In Each Pane. 51 Taking Down Or Up Steel Tubing And Connection S Inculding Cleaning For Refixing Or Removal To Store 15Mm Bore . 52 Taking Down Or Up Steel Tubing And Connection S Inculding Cleaning For Refixing Or Removal To Store 20Mm Bore . 53 Supplying And Laying Of 20Mm Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings On Walls / Ceiling Or Laying In Floors Complete All As Specified. 54 --Do-- All Asabove But For 25Mm Bore. 55 Supply And Fixing In Cpvc 20Mm Brass Elbow ( 3 / 4 X 1 / 2 ) 56 Supply And Fixing In Cpvc 20Mm Brass Tee 57 Supply And Fixing In Cpvc 20Mm Male Brass Threaded Adaptor ( Mta / Mbta ) 58 Supply And Fixing In Cpvc 20Mm Female Brass Threaded Adaptor ( Fta / Fbta ) 59 S / F Gate Valve Of 25Mm Dia Brass All As Specified And Directed 60 S / F Gate Valve Of 20Mm Dia Brass All As Specified And Directed 61 S&F Rotational Moulded Polyethylene Water Storage Tank ( Cylindrical Vertical With Closed Top ) Hoisted & Fixed In Position All As Specified In Ssr Pt I Capacity Of Tank 1000 Ltr Including Gun-Metal, Globe Or Gate Valves 25Mm Bore, With Iron Wheel Head, Screwed Both Ends & Ball Brass Valves 20Mm Dia, High Pressure, With Polythene Float And Fly Nut And Dismantling Water Tanks And Removing To Store Complete. 62 Supply & Fix In Repairs White Vitreous China Squatting Pan Orissa Pattern Of Size 580Mm X 440 Mm, With Integral Foot Rest And P Or S Trap Connection To Trap And To Flushing Pipe Front Or Back Inlet Including, Trap And Taking Out Old Wc & Connections Including 110Mm Pvc ( Swr ) Wc Connector With Lip Ring Etc With Ptmt Set Of Length Of 450 Mmcomplete All As Specified And Directed. 63 S & Fpvc Valveless, Syphonic Action Type Flush Tank In Repair, White, 10 Litre Capacity With Inlet Ball Valve, Float & Handle Incl Brackets Complete High Level, Flush Pipes Of Pvc 32 Mm Dia, Rubber Cones, Pvc Connection 15 Mm Size With Ptmt Nut Of Length 600 Mm Etc Complete All As Directed . 64 Suuply And Fix In Repairs Vitreous Chaina Wash Hand Basin White Flat Back Of Size 550Mm X 400Mm, Fixed With A Set Of Cast Iron Brackets Including Cutting And Pinning In Ends Of Brackets To Wall, Provision Of 15Mm Size Pillar Tap, Cast Copper Alloy, With Capstan Head, Chromium Plated, Screwed Down High Pressure, With Or Without Letter Hot Or Cold With Long Scrwed Shanks And Fly Nuts, 32Mm Dia Brass Chromium Plated Waste Fittings 450Mm Long Pvc Connection Of 15Mm Size With Ptmt Nuts And 40Mm Dia Waste Pipe Complete. 65 S&F Sinks Made Of Stainless Steel L Mm Thick Kitchen Or Laboratory With Plugs, Washers And 32Mm Wastes; Including Bedding In Cement Mortar On To Dwarf Wall Or Includingfixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X 160Mm All As Specified And Directed. 66 S & F Towel Rail 60 Cm Long Brass Chromium Plated 20Mm Dia With Brackets Fixed To Walls. 67 S&F Chromium Plated Shower Roses With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipeor Uniobrass Chromium Plated Shower Rose 125Mm Size Fixed In Repair All As Specified. 68 S&Fdouble Arm Wall Mounted Reversible Plain / Magnifying ( X3 ) Pivoted Mirror , Fixed In Repairs, Complete All As Specified And Directed. 69 S&F Vitreous China Table Top Basin Size ( Mm ) 170X420x380, In Repairs. 70 Aesthetically Designed Bathroom Mirror With Hi-Quality 4Mm Glass Dual Hanging Option Durable And Strong, With Overall Size 600 X 600 Mm And Mirror Size 600 X 450, Complete All As Specified And Directed. 71 S&F Vitreous China Wash Down Water Closet ( Pedastal Pattern ) White Colour Of P Or S Trap Combine Pan With All Accessories. 72 S&Ftowel Rack With Lower Hanger ( Stainless Steel ) , Fixed In Repairs, Complete All As Specified And Directed. 73 S&F Central Hole Basin Mixer For Whb With Round Spout With Popup Waste System With 450Mm Long Braided Hoses, 20Mm Cartridge Size Suitable For 15Mm Bore Gi Pipe. 74 S&F Wall Mixer Wall Mount Brass Silver Polished 3-In-1 All As Spd And Directed By Engr-In-Charge. 75 S&F Angular Stop Cock With Wall Flange Suitable For 15Mm Bore Gi Pipe. 76 S&F 2 Way Angular Stop Cock With Wall Flange Suitable For 15Mm Bore Gi Pipe. 77 S&F Bib Cock With Flange Suitable For 15 Mm Bore Gi Pipein Repairs, All As Spd & Directed. 78 S&F Soap Dish Holder, In Repairs, All As Spd And Directed By Engr-In-Charge. 79 S&F Paper Holder With Flap Recessed Type ( Stainless Steel ) , In Repairs, All As Spd And Directed By Engr-In-Charge. 80 S&F Corner Glass Shelf With Bracket, In Repairs, All As Spd And Directed By Engr-In-Charge. 81 S&Fglass Shelf With Bracket, In Repairs, All As Spd And Directed By Engr-In-Charge. 82 S&F Hand Shower ( Health Faucet ) ( Abs Body ) With 1 Metre Long Easy Flex Tube In Chrome Finish And Wall Hook, In Repairs, All As Spd And Directed By Engr-In-Charge. 83 S & F Pvc ( Swr ) Floor Trap With Grating 75 Mm Dia, Plain With Steel Grating Including Jointing With Solvent Cement 84 S&F 600X450mm Be Velled Edge Mirror Of Selected Quality Glass Mounted On 6Mm Thick Ac Building Baord Or Comercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Waste Washer. 85 Dismantling Cast Irondrain Pipes Of Dia 100Mm 86 M&L For 110Mm Dia Pvc ( Swr ) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Floors / Walls As Soil Pipe All As Spd. 87 M&L For 75 Mm Dia Pvc ( Swr ) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Floors / Walls As Soil Pipe All As Spd. 88 S&F For 110Mmpvc ( Swr ) Junction Single ( Single T ) Equle Or Unequle With Access Door All As Spd. 89 S&F 110X75mm Pvc ( Swr ) Reducer 90 S&F 110Mm Pvc ( Swr ) Bends 91 S&F 110 / 110 Pvc ( Swr ) P Trap All As Specified And Directed. 92 Pvc ( Swr ) 75 Mm Dia Bends Any Radius. 93 Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Including Cutting And Separating Old Reinforcement To Facilitate Demolition Including Removal Of Rubbish Outside Md Land Complete All As Specified And As Directed By Engineer-In-Charge. 94 M&L For Rcc 1:2:4 Type B-1 ( Using 20 Mm Graded Aggts ) As In Chajjas / Parapets, Manhole And Canopies Etc Upto 4 Storey Buildings Complete All As Specified And As Directed By Engineer In Charge. 95 Material And Labour For Rcc 1:2:4 Typeb-I Using 20 Mm Graded Stone Aggregate As In Slabs, Supported On Walls, Landings, Balconies, Shelves And The Like Complete All As Specified And As Directed By Engineer In Charge. 96 S&F Any Dia Of Tmt Bars10 Mm Dia & Over As In Reinforcement Of Columns, Beams, Rcc, Slabs, Chajjas, Lintels Etc Cut To Length Bent To Shape Required Including Cranking, Bending, Spirally Hoping For Columns, Hooking Ends And Welding The New Reinforcement With Old Steel Bars To Receive Gunniting Treatment Over Existing Surfaces Complete All As Specified And As Directed By Engineer In Charge. 97 S&F 8Mm Dia Tmt Bars, Cut To Length Bent To Shape Requiredincluding Cranking Bending Spirally For Hoping For Columns, Chajjas To Parapets Etc Hooking Ends And Binding With Mild Steel Wire Not Less Than 0.90Mm Dia Complete All As Specified And As Directed By Engineer In Charge. 98 From Work To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landing & Similar Work Not Exc 200Mm Thick ( Horizontal Or Sloping ) For Rough Finished Surfaces Complete All As Specified And Directed By Engineer-In-Charge . 99 M&L For From Work To Lintels / Chajjas Or Sunshades For Fair Finished Flat Surfaces Complete All As Specified And As Directed By Engineer-In-Charge. 100 M&L For Cutting Chases, Pinning In Making Good To Faces Where Required In Cement Mortar 1:3 For Lintels / Chajjas Shelves Etc In Brick Work Exceeding 20Cm Girth Complete All As Specified And As Directed By Engineer-In-Charge. 101 Exposing Existing Rcc Members Such As Columns, Beams, Slabs, Lintels Etc. Up To The Main Reinforcement Carefully By Means Of Chisel & Hammer, Hard Wire Brushes Or Any Other Mechanical Means, So As To Remove All Loose Concrete And Cleaning The Surface To Remove All Rust Particles Etc. And Make The Surface Ready For Further Chemical Treatment In Bone Dry Condition. 102 M&L For50 Mm Thick Guniting In Patches On To The Required Area On Rcc / Pcc Columns, Beams, Stairs, Lintels, Retaining Walls, Sunshades, Roofing Slab Etc. Of All Sizes And Shapes At All Heights From Existing Ground Floor And All Locations With Cement And Mortar 1:3 ( 1 Cement : 3 Sand ) Under 2 To 2.8 Kg / Cm2 Pressure After Removing The Damaged Loose Spalt Concrete Portions By Chipping, Removal Of Dust And Applying One Coat Of Rust Convertor / Kp-100 Equivalent Grade Over Reinforcement Wherever Necessary Providing And Tying In Position 75X75x10 G Ms Welded Mesh Or Smaller Size Over Treated Surface Ready To Receive Grouts, Curing For 10 Days Etc, Complete Operation All As Directed Including Labour Charges Hire For All Tools And Plant Machineries Cost Of Consumables, Scaffolding All Types Of Protective Equipments, Plant Floors, Pipelines, Vessels, Materials Etc. So As To Do Guniting In Plant, Removing The Debris Etc. Rebound Materials Etc. To Low Lying Areas In The Factory Compound And Leveling As Directed, Complete All As Directed By Genote ( I ) After Placing The Additional Reinforcement All Concrete Surfaces Shall Be Thoroughly Scrubbed With Brushes, Washed With Water Andalloy To Dry.To This Surface Apply Chemistic Polycrete Admixture At The Rate Not Less Than 2% By Weight Of Cement Or As Per Manufacture’S Instructions. ( Ii ) When Polymix Coating Is In Tackey Condition Guniting Is Done With Polycrete Admixture At The Rate Not Less Than 2% By Weight Of Cement Or As Per Manufacturer’S Instruction.Polycrete Admixture Shall Be Procured From Chemical Adhesive Pvt Ltd Co Or Their Authorized Dealer. ( Iii ) Cost Of The Above Aspects Shall Be Deemed To Be Included In The Quoted Rate Of The Respective Item And Nothing Extra Shall Be Paid On Any Account. 103 -Do- For 35 Mm Thick Guniting To Ceiling 104 Supply And Fix Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roofcovering / Cladding To Wall, Fixed With Self Tapping Screws As Specified. 105 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws As Specified. 106 S & F Steel Work In Tubular Trusses Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161- 1979 Grade St.-240Channel, Angle, Or Tee Sections, Fixed Independently As In Rafter And Purlins Without Connecting Plates, Etc. 107 S & F Plates ( Plain Or Chequered ) Channels, Square Cut Or Notched ( Ordinary And Counter Sunk ) Forming Holes, Without Any Attachment Fe-410-W ( Gde E-250 ) Quality Ball As Specified. 108 M & L For Preparation Of New Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide On Surfacess Of Any Discription, Over 10Cm In Width Or Girth 109 M & L For Cement Concrete 1:2:4 Type B1, Using 20Mm Graded Aggregate As In Foundations, Including Rafts, Footings, Foundation Beams, Plinth Beams; Bases For Columns, Etc. Basement Slabs, Under-Reamed Piles And Mass Concrete. 110 S& F Of Solid Pvc And Cupboard Shelf / Partition Frame, Base / Shutter Of 18 Mm Thick Side Of Panel Externally Impact Finish To The Shutter And Joined Together With Solvent Cement Adhesive 8Mm Thick ( 4Mmx 2Mm ) X 12Mm Wide Pvc Sheet Is Used As Gap Insert For Top And Bottom Rail 18Mm X 1Mm Pvc Edge Looing Is Done On Top And Bottom Side Using Pvc Solvent Cement Adhesive Etc Complete As Per Direction Of Engr-In-Charge Manufacture Specification And Drawing.Complete All As Specified And Directed By Engr-In-Charge. 111 S&F For Sheel Partition Of Requried Size Consisting Of Pannel Of 12 Mm Thick Celuka Pvc Ply And For Supporting The Hold Of Shelf / Partion To Be Edge Lpped By 118 X18 Mm As Per Requried Length. The Front Edge Visible In The Front Of The Shelf / Partition To Be Edge Coloured By Matching Colour Complete As Per Direction Of Engr-In-Charge Manufacture Specification And Drawing. 112 S&F Stainless Steel 302, Electro-Polished Corrosion Resistense Kitchen Cutlery Holder Basket Having Size Modular Type Of Size 24X20x4 Inches With Side Sliding Roller Clip Over Stainless Steel Channel On Both Side Included Auto Hinges Of Size 3X2X1 Withfixed Complete As Per Spcified And Directed. 113 S&F Stainless Steel 302, Electro-Polished Corrosion Resistense Cup And Sauccor Holder / Basket Having Size Modular Type Of Size24x20x6 Inches With Side Sliding Roller Clip Over Stainless Steel Channel On Both Side Included Auto Hinges Of Size 3X2X1 Fixed Complete As Per Spcified And Directed. 114 S&F Stainless Steel 302, Electro-Polished Corrosion Resistense Moduler Thali Hold Unsevisiable / Basket Having Sizesize24x20x8 Inches Including Telescopic Drawer Channel Having Weighing Capacity Of 6Kg Fixed Complete As Per Spcified And Directed. 115 S&F Stainless Steel 302, Electro-Polished Corrosion Resistense Moduler Jar Basket Unsevisiable / Basket Having Size15x20x8i Inches Ncluding Telescopic Drawer Channel Having Weighing Capacity Of 6Kgcomplete As Per Spcified And Directed. 116 S&F Electric Chimney Filterless Auto Clean Of Size: 60 Cm 2-4 Burner Stove Wall Mounted Chimney Suction Capacity: 1200 M3 / Hr, Motion Sencer Control Mkae Elica, Faber, Glen, Hinware Complete As Per Spcified And Directed. 117 S&F Stainless Steel Handles 100Mm Size For Kitchen Cabinet Shutters Complete As Per Spcified And Directed. 118 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Each Door . 119 S & F Steel Rolling Shutters, With Out Ball Bearing, As Specified Including Top Cover, Anchoring Rod, Hasp And Staple And One Shop Coat Of Primer;Erected In Position As Indicated, Complete But Gear Operated Type With Bevel Gear Box And Crank Handle Thichness 1.25Mm In Laths. 120 S & F For Safety Lever Locks Mild Steel With 4 Levers For Rolling Shutters. 121 S & F For Ball Bearing For Rolling Shutters. 122 Removing Demolished Materialexc. 1.50 Km But N Exc. 5 Km And Depositing Where Directed The Starting Point In Soils.

INR 1000 /-

INR 166500.0 /-

INR 94.10 Lakhs /-

Name of Work : SPECIAL REPAIR TO BLDG NO P-32 (OFFRS MD ACCN) AT ALTHINO, PANAJI GOA

Sl. No.	Item Description
1	Taking down cement plaster on wall built in cement or cement mortar raking out joints, hacking for key, scrubbing out with water etc. complete.
2	Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc.
3	Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed.
4	M & L rendering 15 mm thickon stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6without using extra cement.
5	M & L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 without using extra cement with using water proofing compound.Note :- Water proofing compound will be measered seperatly.
6	M&L 10mm thick plastering on fair faces of bricks or concretesurfaces finished even and smooth w/o using extra cement in cm1:3 on ceiling
7	Supply only integral waterproofing compound.
8	M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exteriorpaint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 1mm thick plaster of paris putty over plastered surface to prepare the surface even and smooth complete all as specified and directed.
9	M&L for complete removal of existing surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over over 1mm thick plaster of paris putty over plastered surface to prepare the surface even and smooth complete all as specified and directed.
10	M&L for complete removal of existing treatment and applying two coat of oil bound distemper on plastered surfaces ofwalls including providing and applying 3mm thick wall care putty on wallthickness over plastered surfaces to prepare the surface even and smooth complete all as specified and directed.
11	M&L applying two coat of oil bound distemper on newly plastered surfaces ofwalls including preparation and including providingapplying 3mm thick wall care putty on wall over plastered surfaces to prepare the surface even and smooth complete all as specified and directed.
12	M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying two coat (finishing coats) of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge .
13	M & L preparation of new wooden surface and applying two coats of synthetic enamel paints over a coat of pink primer of any description, not otherwise described, over 10cm width or girth.
14	M & L for preparation of old steel Surfaces and applying one coats of synthetic enamel paint on surfacess of any discription, over 10cm in width or girth .
15	M&L two coat Vanish with sizing, wood filler,stain Surfaces of any 10cm in width or girth.
16	Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) .
17	M&L glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4.
18	Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) for plinth protection & foot path.
19	M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring etc.
20	M & L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cementslurry and pointed in white or coloured cement to match incl 20mm th screed bed in CM 1:6.
21	M & L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 20mm thick screed bed in CM 1:6.
22	M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6.
23	M & L rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.
24	M&L machine cut kota stone slab flooring 20mm to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including 20mm thick screed bed in CM 1:6complete.
25	M&L Machine cut kota slab 20mm to 25mm thick in risers of step skirting dado over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishingincluding 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 complete.
26	M & L Cement concrete type C- 2, 1:3:6 (40mm graded aggregate)75mm thick as in sub base.
27	M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm thick screed bed in CM 1:6.
28	M & L PCC 1:3:6, type C-2, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.
29	Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5sqm but n exc 4 sqm each.
30	Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1sqm but n exc 2 sqm each.
31	Taking down shutter of any description (Aluminium/wooden door) exc 1 sqm but not exc 2sqm each and refixing in same opening .
32	Taking down shutter of any description (Aluminium/wooden window) not exc 1 sqm each and refixing in same opening .
33	Taking down shutter of any description exc 1 sqm but not exc 2sqm each etc.
34	S & F 1stClass soft woodplain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints.
35	Supply and fix 35mm thick factory made 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part- I), kiln seasoned and chemically pressure treated.
36	S & F Second class hard wood factory made glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I 1991 section 8 clause 8.20 (b)
37	Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg.
38	Factory made solid PVC moulded Door shutter, 28 to 30 mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded coloured PVC sheet on front face & 2mm plane colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core.
39	S & F 150 mm aluminium handles,cast type anodised
40	S & F 100mm butt hinges for windows midium weight,cold rolled mild steel and fixed
41	S & FAluminium anodised barrel tower bolts150mm for door of extruded section and fixed
42	S&F 300 mm long Aluminium alloy,anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified.
43	Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
44	S & Mortice lock 2 lever brass, vertical type, size 100 mm
45	S&F in repair floor door stopper aluminiumbody with overall length 140mm
46	Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors windows ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i e at top bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing/panelling C P brass/stainless steel screws all complete as per architectural drwings and the directions of engineer-in-charge.
47	S & F Power coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
48	S&F aluminium grills DG-104 of Deco Grill/ Hindal 10 mm thick diamond shape with aperture 7.5cm for windows
49	S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples as repair.
50	S & F 4 mm thick plain sheet glass ordinary quality fix with bead in squaresn. exc. 0.5 SM in each pane.
51	Taking down or up steel tubing and connection s inculding cleaning for refixing or removal to store 15mm bore .
52	Taking down or up steel tubing and connection s inculding cleaning for refixing or removal to store 20mm bore .
53	Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
54	--do-- all asabove but for 25mm bore.
55	Supply and fixing in CPVC 20mm Brass Elbow (3/4 x 1/2)
56	Supply and fixing in CPVC 20mm Brass Tee
57	"Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA)
58	"Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA)
59	S/F Gate valve of 25mm dia brass all as specified and directed
60	S/F Gate valve of 20mm dia brass all as specified and directed
61	S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR PT I capacity of tank 1000 ltr including Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut and Dismantling water tanks and removing to store complete.
62	Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections including 110mm PVC (SWR) WC connector with lip ring etc with PTMT set of length of 450 mmcomplete all as specified and directed.
63	S & FPVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as directed .
64	Suuply and fix in repairs vitreous chaina wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold"" with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete.
65	S&F sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and 32mm wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.
66	S & F Towel rail 60 cm long brass chromium plated 20mm dia with brackets fixed to walls.
67	S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or unioBrass chromium plated shower rose 125mm size fixed in repair all as specified.
68	S&FDouble Arm wall mounted Reversible Plain/Magnifying (X3) Pivoted mirror , fixed in repairs, complete all as specified and directed.
69	S&F Vitreous China Table Top Basin Size (mm) 170x420x380, in repairs.
70	Aesthetically designed bathroom mirror with Hi-quality 4mm glass dual hanging option durable and strong, with overall size 600 x 600 mm and mirror size 600 x 450, complete all as specified and directed.
71	S&F vitreous china wash down water closet (pedastal pattern) White colour of "P" or "S" trap combine pan with all accessories.
72	S&FTowel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed.
73	S&F Central hole Basin Mixer for WHB with Round Spout with popup waste system with 450mm Long Braided Hoses, 20mm Cartridge Size suitable for 15mm bore GI pipe.
74	S&F Wall mixer wall mount brass silver polished 3-in-1 all as spd and directed by Engr-in-Charge.
75	S&F Angular stop Cock with wall flange suitable for 15mm bore GI pipe.
76	S&F 2 way Angular stop Cock with wall flange suitable for 15mm bore GI pipe.
77	S&F Bib Cock with flange suitable for 15 mm bore GI pipein repairs, all as spd & directed.
78	S&F Soap Dish Holder, in repairs, all as spd and directed by Engr-in-Charge.
79	S&F Paper holder with Flap Recessed Type (Stainless steel), in repairs, all as spd and directed by Engr-in-Charge.
80	S&F Corner Glass shelf with bracket,in repairs, all as spd and directed by Engr-in-Charge.
81	S&FGlass shelf with bracket,in repairs, all as spd and directed by Engr-in-Charge.
82	S&F Hand Shower (Health faucet) (ABS Body) with 1 metre long easy Flex Tube in Chrome Finish and Wall Hook, in repairs, all as spd and directed by Engr-in-Charge.
83	S & F PVC (SWR) floor trap with grating 75 mm dia, plain with Steel grating including jointing with solvent cement
84	S&F 600x450mm be velled edge mirror of selected quality glass mounted on 6mm thick AC building baord or comercial plywood and fixed to wooden plugs with chromium plated brass screws and cup waste washer.
85	Dismantling cast irondrain pipes of dia 100mm
86	M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as spd.
87	M&L for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as spd.
88	S&F for 110mmPVC (SWR) junction single (single T) equle or unequle with access door all as spd.
89	S&F 110X75mm PVC(SWR) reducer
90	S&F 110mm PVC(SWR) bends
91	S&F 110/110 PVC(SWR) P trap all as specified and directed.
92	PVC (SWR) 75 mm dia bends any radius.
93	Demolition of reinforced cement concrete of any description and in any position including cutting and separating old reinforcement to facilitate demolition including removal of rubbish outside MD land complete all as specified and as directed by Engineer-in-Charge.
94	M&L for RCC 1:2:4 type B-1(using 20 mm graded aggts ) as in chajjas/parapets,manhole and canopies etc upto 4 storey buildings complete all as specified and as directed by Engineer in Charge.
95	Material and labour for RCC 1:2:4 typeB-I using 20 mm graded stone aggregate as in slabs, supported on walls, landings, balconies,shelves and the like complete all as specified and as directed by Engineer in Charge.
96	S&F any dia of TMT bars10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars to receive gunniting treatment over existing surfaces complete all as specified and as directed by Engineer in Charge.
97	S&F 8mm dia TMT bars, cut to length bent to shape requiredincluding cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and as directed by Engineer in Charge.
98	From work to soffits of suspended slabs such as roof slabs, floor slabs, landing & similar work not exc 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and directed by Engineer-in-Charge .
99	M&L for from work to lintels/chajjas or sunshades for fair finished flat surfaces complete all as specified and as directed by Engineer-in-Charge.
100	M&L for cutting chases, pinning in making good to faces where required in cement mortar 1:3 for lintels/chajjas shelves etc in brick work exceeding 20cm girth complete all as specified and as directed by Engineer-in-Charge.
101	Exposing existing RCC members such as columns, beams, slabs,lintels etc. up to the main reinforcement carefully by means of chisel & hammer, hard wire brushes or any other mechanical means, so as to remove all loose concrete and cleaning the surface to remove all rust particles etc. and make the surface ready for further chemical treatment in bone dry condition.
102	M&L for50 mm thick guniting in patches on to the required area on RCC/PCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and mortar 1:3 (1 cement : 3 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 75x75x10 g MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc, complete operation all as directed including labour charges hire for all tools and plant machineries cost of consumables, scaffolding all types of protective equipments, plant floors, pipelines, vessels, materials etc. so as to do guniting in plant, removing the debris etc. rebound materials etc. to low lying areas in the factory compound and leveling as directed, complete all as directed by GE Note (i)After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water andalloy to dry.To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions. (ii)When polymix coating is in tackey condition guniting is done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction.Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized dealer. (iiI)Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
103	-do- for 35 mm thick guniting to ceiling
104	Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/ cladding to wall, fixed with self tapping screws as specified.
105	S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
106	S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240channel, angle, or tee sections, fixed independently as in rafter and purlins without connecting plates, etc.
107	S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W(Gde E-250) quality Ball as specified.
108	M & L for preparation of new steel Surfaces and applying two coats of synthetic enamel paint over a coat of red oxide on surfacess of any discription, over 10cm in width or girth
109	M & L for cement concrete 1:2:4 Type B1, using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams,plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete.
110	S& F of Solid PVC and cupboard shelf/ partition frame, base/ shutter of 18 mm thick side of panel externally impact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx 2mm) x 12mm wide PVC sheet is used as gap insert for top and bottom rail 18mm x 1mm PVC edge looing is done on top and bottom side using PVC solvent cement adhesive etc complete as per direction of Engr-in-charge manufacture specification and drawing.complete all as specified and directed by Engr-in-Charge.
111	S&F for sheel partition of requried size consisting of pannel of 12 mm thick celuka PVC ply and for supporting the hold of shelf / partion to be edge lpped by 118 x18 mm as per requried length. The front edge visible in the front of the shelf/ partition to be edge coloured by matching colour complete as per direction of Engr-in-charge manufacture specification and drawing.
112	S&F stainless steel 302, electro-polished corrosion resistense kitchen cutlery holder basket having size modular type of size 24x20x4 inches with side sliding roller clip over stainless steel channel on both side included auto hinges of size 3"x2"x1" withfixed complete as per spcified and directed.
113	S&F stainless steel 302, electro-polished corrosion resistense cup and sauccor holder /basket having size modular type of size24x20x6 inches with side sliding roller clip over stainless steel channel on both side included auto hinges of size 3"x2"x1" fixed complete as per spcified and directed.
114	S&F stainless steel 302, electro-polished corrosion resistense moduler thali hold unsevisiable /basket having sizesize24x20x8 inches including telescopic drawer channel having weighing capacity of 6kg fixed complete as per spcified and directed.
115	S&F stainless steel 302, electro-polished corrosion resistense moduler jar basket unsevisiable /basket having size15x20x8i inches ncluding telescopic drawer channel having weighing capacity of 6kgcomplete as per spcified and directed.
116	S&F Electric chimney filterless auto clean of size: 60 cm 2-4 burner stove wall mounted chimney suction capacity: 1200 m3/hr, motion sencer control Mkae Elica, Faber, Glen, Hinware complete as per spcified and directed.
117	S&F stainless steel handles 100mm size for kitchen cabinet shutters complete as per spcified and directed.
118	Dismantling wrought iron or mild steel work of any description not otherwise provided for each door .
119	S & F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete but gear operated type with bevel gear box and crank handle thichness 1.25mm in laths.
120	S & F for Safety lever locks mild steel with 4 levers for rolling shutters.
121	S & F for Ball bearing for rolling shutters.
122	Removing demolished materialexc. 1.50 km but n exc. 5 km and depositing where directed the starting point in soils.