Grama Panchayat has published Tender For Construction Of Anganwadi Building 168 In Ward 15 Venmoney Grama Panchayath. Submission Date for this Tender is 29-01-2024. Building Work Tenders in chengannur Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Stone for masonry work |
2 | Through and bond stone size 24 x 24 x 39cm |
3 | Carriage of Soling stone & masonry stone |
4 | Sundries |
5 | Portland Cement |
6 | Coarse sand (zone III) |
7 | Structural steel such as tees, angles, channels and R.S. joists |
8 | Steel |
9 | Red oxide Zinc chromate primer |
10 | Carriage |
11 | Adjustable span ESO+SI (2.35-3.40) |
12 | Adjustable telescopic prop 3 m (2.02-3.75m) |
13 | Stone Aggregate(single size):20 mm nominal size |
14 | Stone Aggregate(single size): 10 mm nominal size |
15 | Carriage of Stone aggregate below 40 mm nominal size |
16 | Carriage of Coarse sand |
17 | Carriage of Cement |
18 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
19 | Vibrator (Needle type 40 mm) |
20 | Twisted steel/deformed bars |
21 | Carriage of Steel |
22 | Solid blocks of size 30x20x20cm |
23 | Cement |
24 | Coarse sand |
25 | Wall form panel 1250x450xmm |
26 | Corner angle 45x45x5 mm 2.50 long |
27 | Column clamp 450x1070 mm |
28 | Prop 2 m (2-3.5m) |
29 | Fine sand (zone IV) |
30 | Fine sand (1 part badarpur sand : 2 parts jamuna sand |
31 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
32 | Carriage and sundries |
33 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
34 | Vitrified floor tile 50x50 cm |
35 | Pink primer (for wood) |
36 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
37 | Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock |
38 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
39 | Chromium plated Brass screws 30 mm |
40 | Anjili wood scantls |
41 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
42 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
43 | Bright finished or black enameled mild steel screws 40 mm |
44 | Bright finished or black enameled mild steel screws 20 mm |
45 | Anjili wood planks |
46 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
47 | Synthetic enamel paint in black or chocolate shade |
48 | 200 mm Aluminium aldrop |
49 | Iron hooks & eyes 100 mm |
50 | Vitreous China orrisa type w.c. pan size 580 mm |
51 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
52 | 100 mm S.C.I. trap with vent heel |
53 | Vitreous China flat back wash basin 630x450 mm |
54 | 15 mm C.P.brass tap |
55 | C.P. brass waste 32 mm |
56 | C.I. bracket for wash basin and sinks |
57 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
58 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia |
59 | Stone aggregate below 40 mm nominal size |
60 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia |
61 | PVC door Elbow 110 mm dia |
62 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
63 | Plastic emulsion paint |
64 | 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
65 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
66 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
67 | Mild Steel round bar above 12 mm dia |
68 | Flats up to 10 mm in thickness |
69 | Rawl plug 50 mm (designation 10 nos) |
70 | Oxidised mild steel handles 125 mm |
71 | Oxidised mild steel screws 25 mm |
72 | Stone Aggregate(single size): 40 mm nominal size |
73 | Carriage of Stone aggregate 40 mm nominal size and above |
74 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
75 | PVC pipe 50 mm outer dia.6kgf/cm2 |
76 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
77 | PVC vent cowl 63 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail