Department Of Agriculture And Food has published Tender For Farmer Counselling Center At Risigaon, Khariar, District-Nuapada For The Year-2023-24. Submission Date for this Tender is 29-01-2024. Building Work Tenders in khariar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in hard soil or gravelly soil within 50m.Initial lead and 1.5m initial lift including roughdressing and breaking clods to maximum 5cm to 7cmand laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. for foundation work, excluding labour cess and GST. |
| 2 | Supplying, filling in foundation and plinth with sand in 22.5 cm thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only)excluding labour cess and GST. |
| 3 | Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour, and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 4 | CC (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials withT&P etc. Required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 5 | R.C.C. work M-20 grade using 20mm and 10mm size black hard crusher broken granite chips including hoisting lowering laying and centring shuttering and finishing the exposed surface smooth providing groves or beds wherever necessary including curring andcost, conveyance, royaltiesand cost of all materials and labour with T & P required for the work etc. complete in all respect excluding the cost of M.S. Rods or Tor steel and binding wires and labour charge for bending binding and tying grills as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 6 | columnbase and plinth band |
| 7 | Lintel |
| 8 | Sun shade and Chajja |
| 9 | Column and beam |
| 10 | Slab |
| 11 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance of all materials with labour, and T&P etc. required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST.. |
| 12 | Fly Ash brick masonry in cement mortar (1:6) in Plinth & Foundation work using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and of all materials with all labour,and T&P required for the work complete in all respect in all floors as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 13 | Fly Ash brick masonry in cement mortar (1:6) in Superstructure work using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and of all materials with all labour and T&P required for the work complete in all respect in all floors as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 14 | 16 mm thick cement plaster (1:6) finished smooth to inside rough surface ofbrick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and of all materials with all labour, T&P required for the work etc. complete as per the direction of engineer-in-charge, excluding labour cess and GST.. |
| 15 | 12 mm thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST.. |
| 16 | 20mm thick grading plaster(1:4) on roofincluding cost and TC of all materials and curring royalties labour charges complete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 17 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including watering and curing with cost, conveyance, royalties andof all materials with all labour and T&P required for the work etc. Complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 18 | Finishing outside & inside walls with Weather Coat paint of approved shade on new work two coats to give an even shade with one coat water based primer with cost, conveyance, royalties and of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 19 | Finishing inside walls with plastic Emulsion paint of approved shade on new work two coats to give an even shade with one coat water based primer with cost, conveyance, royalties and of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 20 | Providing and Fixing of MS Angle Fabricated Trusses, Purline wind tie andMS Door Shutter, MS Windows as per the Drawing & design approved by deptt. including transportation charges, Two coat of Synthetic enamel paint of approved shedover coat of anti-corrosive red-oxide zinc chrome primer andof all materials with labour, cess and T&P etc. required for the workcomplete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 21 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved qualiy complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 22 | Supply and Fitting of Ceramic Tiles in floors of 30x30cm/ 40x40cm , treads or steps and landing on 5mm thick bed of cement withmortar (1:1) with neat cement slurry mixed with pigments including cost of tlle,&TC of mateials all complete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 23 | Supply and Fitting of Ceramic Tiles in wall of 20x30cm/ 20x20cm and dado on 5mm thick bed of cement withmortar (1:1) with neat cement slurry mixed with pigments including cost of tlle,&TC of mateials all complete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 24 | Cost of Sanitary works(As per the sheet) |
| 25 | Providing and fixing of Rotational moulded polyethylene cylindrical vertical water storage tanks (double layer)conforming to IS : 12701--1996 500 litre capacityincluding all materials and labour complete, as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 26 | Providing and fixing to wall or ceiling and floor rigid UPVC pipes class IV (8 kgf/cm²)/class III(6kgf/cm²) conforming to IS:4985/2000 and pipe fittings of the following nominal bore with including making good the wall, ceiling and floor all complete as per specification clamps 25 mm dia |
| 27 | Providing and fixing to wall or ceiling and floor rigid UPVC pipes class IV (8 kgf/cm²)/class III(6kgf/cm²) conforming to IS:4985/2000 and pipe fittings of the following nominal bore with including making good the wall, ceiling and floor all complete as per specification clamps 16 mm dia |
| 28 | Providing and fixing of |
| 29 | 15mm dia CP Brass Short Body Bib Cock with cp flange |
| 30 | 15mm dia CP Brass Angle Stop Cock with cp flange |
| 31 | 15mm dia CP pillar cock long neck |
| 32 | 15mm dia CP revolving shower |
| 33 | CP soap holder |
| 34 | Ball Valve teflon brass ball & spindle |
| 35 | Hand Faucet Spray of CP Brass with extension all complete |
| 36 | Supplying all materials, labour, T&P for fitting and fixing of wash hand basin including all fittings and testing etc. complete Vitreous china flat back wash basin 550x400 mm |
| 37 | ProvidingandfixingP.V.C.lowlevelflushingcisternwithmanuallycontrolleddevice(handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litr capacity white |
| 38 | Providing and Fixing Wash Down Water Closet (European type W.C pan of parryware/cera/naycer make) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) |
| 39 | Providing and Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. |
| 40 | Provinding and fixing of 110 mmall complete(110mm dia UPVC single socketed pipe (working pressure 4 kg / cm²) |
| 41 | Provinding and fixing of |
| 42 | a)100 cowl |
| 43 | b)Floor Trap |
| 44 | other sepitic tank fittings and connection with saok pit and etc |
| 45 | Proving and fixing of PVC doors for Toilet including frame complete |
| 46 | Supply connection from the existing water supply with UPVC 25mm pipe allcomplete |
| 47 | Extra fitting for water supply Connection |
| 48 | Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification. |
| 49 | 15mm dia CP urinal spreader |
| 50 | Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification.(size 450mm x 350mm) |
| 51 | Septic Tank and Soak Pit |
| 52 | Electrification (As per the sheet) |
| 53 | Recessed wiring to light pointswith 1.5 mm2 in 20mm dia rigid PVC conduit with 1559mm single core multi strand copper wire and earth continut in copper with on M.S. board with 3mm thick B.K. covered and 5A flash type switch with ISI marked as the direction of engineer in charge |
| 54 | a) Group A |
| 55 | Supply and fitting of 5/6 A 250 flash type socket and switch above specification of existing switch boards.as the direction of engineer in charge |
| 56 | Supplying and fixing of in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3pin 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc as required.(For light plugs to be used in non residential buildings |
| 57 | Recessedcopperwiringtocallbellpointin1mm²pvcs/c multistand copper wire run in 20mm die flex able non-metallic pvc conduit. |
| 58 | Supply and fixing of 2way sigle door MCB dist. Board complete |
| 59 | Supply and fixing of sigle pole 5 amp to 32 amp rating 240 V "B" series miniature circuit breaker MCB |
| 60 | Recessed wiring to submain wiring in PVC conduit along with earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked confirming to IS-694/1990 in 20mm non metalic PVC conduit |
| 61 | (2 x 1.5 sq.mm + 1 x 1.5 sq.mm) |
| 62 | (3 x 2.5 sq.mm + 1 x 1.5 sq.mm)( (inverter line of 2.50 sq mm |
| 63 | (2 x 4 sq.mm + 1 x 1.5 sq.mm) |
| 64 | Supply, Installation, Testing, and Commissioning of 32Amp ICDP Main switchesexisting surface / wall mountnting and complete with HRC Fuse links,interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK |
| 65 | Supply and fitting wiring of 20 watt LED TL fitting with tube complete with all accessories and connections.( Havells/Bajaj/CG) as the direction of engineer in charge |
| 66 | Supply and fitting B.K. angel holder with ISI marked |
| 67 | Supply and fitting of 15 watt /Led light with ISI marked (( Havells/Bajaj/CG) |
| 68 | Supply and wiring of 48 AC celing fan complete with all accessories and connection (Bajaj, Usha, Khatian) |
| 69 | Supply and Installation, testing and commissioning of exhaust fan up to 225 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc. as required.(Bajaj, Usha, Khatian) |
| 70 | Supply and Installation, testing and commissioning of Street light of 20w LED with comple frame fittings including making the suitable of fixtures all complete, connection, etc. as required.(Bajaj, Usha, Khatian, Havells) |
| 71 | 10.0 sq mm PVC insulated Aluminium black twin flat cable working voltage suitable up to 1100 volt |
| 72 | Supply and Installation of 1 KW with 12 Volt 200 Ah Battery Including Trolly Stand and connecting to the power supply line and wiring of (Luminous, Microtech, Exide) make all complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
