|
| 1 | ITEM NO-01Earth work in excavation of foundation trenches or drains. In all sorts ofsoil (including mixed soil but excluding laterite or sandstone ) including removing, spreading or stacking the spoils within the lead of 75m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom. Bailing out water as required complete. (a) Depth of excavation not exceeding 1.500mm.. |
| 2 | ITEM NO-02Earthwork in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm including watering & ramming etc.layer by layer complete. i) Earth obtained from excavation of foundation |
| 3 | ITEM NO-03Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (B) With N.B. Variety stone metal. |
| 4 | ITEM NO-04Ordinary cement concrete ( Mix 3:1.5:1)M-20 with graded stone chips (20 mm. Size) excluding shuttering and reinforcement, if any, in G. floor. As per IS 456-2000 |
| 5 | ITEM NO-05 Hire &labour charges for shuttering with centering & necessary staging up to 4m. using approved stout props & thick hard wood planks of approved thickness with required bracing for concrete stabs, beams, columns, lintels curved or straight including fitting, fixing & striking out after completion of works. (Up to roof of ground floor) (f) 25mm to 30mm shuttering as per decision & direction of Engineer-in-charge. |
| 6 | (f) 25mm to 30mm shuttering without staging in foundation etc |
| 7 | ITEM NO-06Supplying and laying polythene sheet(150gm/sqm) over damp proof course or below flooring or roof terraching or in foundation trenches’ |
| 8 | ITEM NO-07Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening & removal of loose lust (if necessary), cutting to requisite length, hooking & bending to correct shape, placing in proper position & binding with 16 gauge black annealed wire at every inter-section, complete as per drawing & direction. |
| 9 | ITEM NO-08Plaster ( To wall, floor, ceiling etc. ) with sand & cement mortar including rounding off & chamfering corners as directed & raking out joints roughening of concrete surface including throating, nosing & drip course where necessary (ground floor). With (1:4) cement mortar (a) 15mm thick plaster |
| 10 | ITEM NO-10Applying decorative cement based paint of approved quality preparing the surface Including scraping etc. |
| 11 | ITEM NO-11Cleaning compound premises of shrubs plants jungles etc |
| 12 | ITEM NO-12M.S structural work in roof trusses with tubular sectionsconforming to I.S.8069 & 1957& I.S.1161-1958 connected to one another with Bracketgusset ,cleats as per design , direction Of Engineer –in –charge complete including Cutting to requisite size fabrication with Necessary metal are weldingconfirming To I.S.816-1956& I.S 9595using electrodes of approved make and brand confirming to I.S. 814-1957 haulage, hosting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charges of al tools and plants and labour required for the work including all incidental charges such as electricity charges labour insurance charges etc. i) For trusses spanning 12.0 m |
| 13 | GST @ 18 % |
| 14 | CESS @ 1% |