Moradabad Development Authority has published Tender For 16- Sahyadri Housing Scheme Pocket-B Location 96 Mmg. Painting, Painting, Repair And Residual Work Of Buildings.. Submission Date for this Tender is 05-02-2024. Building Work Tenders in moradabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Civil work-(A) Scrapping old white or coloure wash including disposal of refuse as directed by the Engineer inchargewithin adistance of 60 meter (200ft) s I no 708 PWD SOR 2022 |
2 | Dismantling existing plaster including disposal of refuse as directed by Engineer-in-Charge with in a distance of 60 meter (200 feet). S.I. No-706/SOR-2022 |
3 | M-150 brick work in Superstructure 1:4 (one cement and four coarse sand) including necessary cutting and moulding of brick and rewuried thickness of walls not to be less than 1.0 brick. SI 307+309+310/2022 |
4 | Mild steel or iron work of small size and section such as holding down bolts hold fast, tie roads gratiings etc .(when not included in an over all rates )wrought to required form including of supply of steel, bolts , nuts and wastage etc .and fixing same as item no 50 but of fabrication of gril and stair case railling SOR502C-2022 |
5 | supply and fixing MANN on other approved (IS marked)Z section single double leaf openeble shutter steel window with required shesh bass including supply andfixing of approved heavy quality M.s hinges hendis 30mm long stay and holes fasts etc . Complee wrought to required form including drilling holes ,required welding where necessary and also including supply of steel fitting bilts nuts waslage and lasom etc and then fixing required for proper complation of wove as per direction of engineer in change including all material labour T&P machinary royailty and all taxes etc complete as per direction of engineer in change |
6 | Mild steel or iron work in heavy sizes as window and door frame including cost of hinges and including supply of all material, labour, T&P required for proper completion of work. (S.I. No. 503B)/UPPWD SOR-2022 |
7 | Mild steel or iron work offabrication of gril and stair case railling.complete in all respact sor item no 502(C). |
8 | 12 mm. thick plaster with 1:4 (one part cement & Four parts of coarse sand of 2.75 F.M.) over brick work minimum thickness not to be less than 1 cms. Including supply of all material, labour. T & P etc. required for proper completion of the work. (S.I.No.584)/2022 |
9 | Providing wall Putty two coat on New surface with approved quiliy material of Berger/JK/Birla or samiliar make 2 coat Ch.15 New Item 12/2022 |
10 | Providing wall Putty two coat on old surface with approved quiliy material of Berger/JK/Birla or samiliar make 2 coat Ch.15 New Item 13/2022 |
11 | P/f 3"x3" single plaster of paris cornice at the joint of wall and roof including supply of all materials, labour and tools and plants etc required for proper completion of the work as per direction of engeneer in charge complete in all respects. (PSR) |
12 | Supply and fixing of 32mm thick flush door commercial quality conforming to I.S. 2022 Part I (1983) including fixing of wooden clears and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied S.I.470(i) SOR 2022 |
13 | Providing and fixing 30 mm thik wire gauze shutter using galvanised M.S. wire gauze of average width of aperture 1.4 mm wire of dia 0.63 mm for doors windos and clerestory windows including ISI marked bright finished black enamelled MS kiled seasoned amd leak wood (S.I no 9.30.1/2022) |
14 | Providing and fixing ISI marked oxidesM.S. sliding door bolts with nuts & screws etc. complete SorSNO-9.62 250x16mm |
15 | Providing and and fixing ISI marked oxidised M.S. tower bolt blackfinish ,(Barrel type )with necessary screws etc .complete SorSNO-9.63 200x10mm |
16 | providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc complete SorSNO-9.66.1 125 mm |
17 | P/L vitirified floor tiles (BELL/KAJARIA/SOMANI or other standard make) in different sizes (thickness to be specified by the manufaturer) with water absorptions less then 0.08 % and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement, 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. SOR new item. 4 page 39/2022 |
18 | Supply and fixing of 6 mm thick china glaxed tiles of first quality in skirtion or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointion and polishing complete including supply of all materials, labour and %&P etc. required for proper comletion of the work. SOR N0 628/2020 |
19 | Marble stone flooring with 18 mm thick marble stone, as per sampleof marble approved by Engineer-in-charge, over 20 mm (average) thickbase of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :DSR-11.23.2 Raj Nagar plain |
20 | fixing pans of glass with ISI mark quality putty, brads and springs including supply of all material , labour etc concreate SI no. new item 2B chapter 19 pg no.47 SOR 2022 |
21 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR-13.48.1/2022 |
22 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied on previsully paint on old surface.@ 2.20 kg/10 sqm) DSR 13.46.1/2021 |
23 | painting three coat over priming coat (but excluding cost of priming coat) on wood or steel and other metal surface with superiorsynthetic enamel paint of standared make brushing to give an even shade and finished and including cleanig the surface all dirt dust and other foreign matter sand paparing and stripping including coast matter and scoured with wire brushes fine steel/wood scrappers sand papering and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper comletion of the work.SOR New item-2+3(iii)+4(iii)/2022 Page No. 42&43 |
24 | Supply and fixing 10cm internal dia P.V.C. down pipe everest or charminar make complete with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5cm x 3 mm fixed to wall with and including supply of 10 cm long 6 mm dia nuts and bolts including washers of required size. all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe.As per item No. 730 above but with PVC pipe, 6kg/per sq.cm. pressure 100cm dia.SI.NO-730(A)/2022 |
25 | 10cm thick average mud phusha of damped mud mixed with chopped straw @ 8 to 10kg. Per cum well preported 5cm mud laid to proper slope consolidated with wooden thappies with and including 13mm thick plaster with mud and gobri mortar in propertion 3:1 mud and cow dung and covered with flate brick tiles 4cm thick designated M_100 grouted with cement and fine sand norter in 1:3 the joinnts shall be finished with the brick tile surface including cost of all materials, labour and T&P etc. required for proper completion of the work including pointing in proporton of 1:2(1pert of cement and 2 parts of coarse saand) |
26 | Electric work-B Wiring for light point/ fan point/exhaust fan point/ call bell point with 15 sq.mm FRIS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group CDSR(1.10.3)/2022 |
27 | Supplying and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amodular socket outlet and 15/16A modular swithc. connection etc. as requiredDSR(1.32)/2022 A- 100X100X65MM(159/2018) |
28 | B- 175X100X65MM(SOR No 161)/2018 |
29 | C- 250X200X65MM(Sor-162/2018) |
30 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable Jin surface/recessed medium class PVC conduit as required 2x15 sqmm.1x15 sqmm earth wire DSR(1.14.1) 20 2) 146 /2022 |
31 | S/Wiring of submain with two number 4 sqmm FR PVC insulated 1100 volts grade multistand single core copper conductor cablein 20 mm dia heavy dutyPVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. ( SOR N0-262C/2018) |
32 | Wiring for circuit/ subrain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2x25 Somm + 1x25 sqmm earth wire DSR(1.14.2)/2022 |
33 | Sanitary work-C Providing and fixing white vetreous china wash basin including making connection but exculding the cost of fittings, Flat back wash basin of size 630X450 mm SI.no- 17.25.1 |
34 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weithing not less then 690 gms. 15mm nominal bore. (DSR 18.51.1/2021) |
35 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 17.10.1.1 / DSR 2021 (510x1040 mm bowl depth 250 mm) |
36 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with100mm sand cast Iron P or Strap, 10 liter low level white P.V.C. fushingcistren with manually controlled device (handle lever) conforming to IS: 7231,with all fittings and fixtures complete including cutting and making good thewalls and floors wherever required. sor -SNO.17.10 |
37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality comnfoming to IS. 8931, 15mm norminal bore. SOR NO 18.53.1/2021 |
38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC slovent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer - in - charge. Concealed work including cutting chases and making good the walls etc. 20 mm Dia(DSR- 18.8.1)/2021 |
39 | 25 mm (DSR- 18.8.3)/2021 |
40 | Providing and placing on terrace (at all floor leveis) polyethyiene water storage tank ISI, 12701 marked with cover and sulitable locking arrangement and making necessary hles for inlet, outlet and overflow pipes but without fittings and the base support for tank. SI.No. 18.48/DSR/ 2021 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail