Military Engineer Services-MES has published Tender For Repair To Flooring Plastering Joinery Plumbing And Certain Br Works In Building Inside Inf School Mh Mdc Of Age Br Ii Under Ge Mis Mhow. Submission Date for this Tender is 06-02-2024. Building Work Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Jan-2024 | Change in bid dates | Date | 06-02-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified |
| 2 | Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified |
| 3 | S & Fsecond class hard woodplain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 4 | S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified |
| 5 | S&F second class Hard wood35 mm thick glazed and skeleton(doors)shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a) Supplied and fitted to chowkats complete all as specified |
| 6 | M&L for peparation of new wood and wood based surfaces of any description not other wise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 7 | S&Ffactory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified |
| 8 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail, lock rail & bottom rail. Panelling of plain colourPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified |
| 9 | S&F Butt hinges of size 100mm medium weight cold rolled mild steel and fixed |
| 10 | S&F 150 mm long Aluminium anodized barrel tower bolts of extructed section . |
| 11 | S&F aluminum alloy handles fabricatedanodised of 150 mm long. |
| 12 | S&Ffabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partition, with one or more rebates sections of approved tint including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc including taking down of existing frame complete all as specified |
| 13 | S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, jointing cleats, glazing clips rubber packing anodised aluminium snap beading screws etcincluding taking down of existing shutter complete all as specified |
| 14 | S&F aluminium coloured power coated door shutters, aluminium section weighing 0.55 Kg/m including necesssary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etcincluding taking down of existing shutter complete all as specified |
| 15 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferring of edges for service window/counters complete all as specified |
| 16 | S&F in repair aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified |
| 17 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified |
| 18 | S&F in repairsVeneered decorative 18 mm thick plywood, grade 1 (with BWR resin) with decorative laminate minimum 1mm thick on both faces; fixed with screws to timber frame work complete all as specified Note: Colour and texture of laminate shall be approved byEngineer-in-charge. |
| 19 | S & Ffactory made PVC shelf/partition of required size consisting of panel of 18 mmthick celuka PVC ply having 1 mm thick PVC sheet pasted on itof density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified and directed .Note:Design,Size,Colour and Texture of PVC ply shallbe approvedby Engineer in charge. |
| 20 | S&F in repair 25 mm dia mild steel chromium plateddrapperycurtain rod withfixing bracket complete all as specified |
| 21 | M&L for Aluminium Composite Panels (ACP) any colour offor fixing in Alm door/partition with all other necessary accessories for fixingcomplete all as specified and directed. |
| 22 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified |
| 23 | Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified |
| 24 | M&Lfor Brick work with sub class "B" modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in any positioncomplete all as specified |
| 25 | All as per item No 24 above but except brick. Note : Serviceable bricks obtained from demolition shall be re-used. |
| 26 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall andfinished even and smooth without using extra cement complete all as specified |
| 27 | M&L for rendering 10 mm thick in CM ( 1:6 ) on fair faces of wall/ concrete surfaces finished even and faircomplete all as specified |
| 28 | M&L for applying two coats of first quality oil emulsion distember over a coat of primer overa coat of Acrylic / water proofing wall putty (ifrequired) on walls complete all as specified Note:- Putty shall be measured and paid seperately under relevant item |
| 29 | M&L for preparation of newplasteredsurfaces of walls and applying two coats ofacrylic smooth exterior paint of required shade @ 1.67 litre/10 sqm overa coat of primer @ 2.20 kg /10 sqmofsame makeall as specified |
| 30 | M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks and applying two coats offirst quality oil emulsion distemper white/coloured overa coat of cement base white wall carebased putty as required at site in patches complete all as specified Note:- Putty shall be measured and paid separately under relevant item. |
| 31 | M&L for Preparation of old painted surfaces of wood/wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified |
| 32 | All as per item No. 31 above but on steel surfaces |
| 33 | M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marksand applying twocoats ofexterior weather proof water base emulsionpaint white/coloured over primer of same makeover white cement based putty as required at site in patches all as specified. Note : Putty shall be measured and paid seperately under relavant Item. |
| 34 | M&L for providing and applying minimum 1mm thick Acrylic /water proofing wall putty over prepared surface to achive the surface even and smooth for painting. |
| 35 | S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed/Glass and one shutter wire mesh)with following specification complete all as specified and as directed by Engineer-in-charge. (i) Windows frame of cross section 101mm x 44mm (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm (iii) Sliding shutter frame of cross section 40 x 18mm (iv) 4 mm thick glass superior quality. (Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (Min) (vii) Sliding rollers per shutter - 02 Nos. (Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.Note- (a)Thickness of Aluminium Section shall be minimum2 to 3mm (Final Thickness and Cross Section ofAluminium sectionof higher size without any extra cost shallbe approvedEngineer in Charge as per Site requirement (b) Drawing /size of window shallbe provided by Engineer in Charge during execution of work as per site requirement. |
| 36 | S & F powder coated aluminum door with the following specification and making good the adjacent surfaces, complete all as specified and as directed. (a) Cross section of chowkhat frame 101.60x44.45mm (b) Cross section of hanging and meeting style 83x44mm (c) Top rail of cross section 114x44mm (d) Bottom rail of cross section 114x44 mm(e) Locking rail (middle rail) of cross section 83x44 mm (f) 4 mm thick glass superior quality. (Min) (g) Aluminum handle eisc type -02 Nos per shutter (inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Concealed Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. Note- (a)Thickness of Aluminium Section shall be minimum2 to 3mm (Final Thickness and Cross Section ofAluminium sectionof higher size without any extra cost shallbe approvedEngineer in Charge as per Site requirement (b) Drawing /size of window shallbe provided by Engineer in Charge during execution of work as per site requirement. |
| 37 | Demolition of cement concrete of any description in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all asspecified and as directed . |
| 38 | M&L for PCC 1:2:4 type B0 using 12.5 mm graded crushedstone aggregate as in sub base, levelling course, etc complete all as specified |
| 39 | M&L forPCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, floor, etccomplete all as specified |
| 40 | M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in mud stops complete all as specified |
| 41 | M&L forMoorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed includingwatering as required complete all as specified and directed. |
| 42 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing )and rubbish off the primeses complete all as specified |
| 43 | M&L for non skidceramic colouredtiles 7-8mm thick (square/rectangular) of size 300x300mm/400x400mm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified |
| 44 | M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT) / Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.18 sqmbut not exceeding 0.36 sqm (ie)size 600mm x 600 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified and as directed.Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / textureof GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b)Glazed Coating on GVT / PGVTshallnot be less than 1mm thick . |
| 45 | All as per item No 44above but as in skirting / dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified |
| 46 | M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT) / Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.36 sqmbut not exceeding 0.72 sqm (ie)size 600 mm x 1200mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified and as directed.Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / textureof GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b)Glazed Coating on GVT / PGVTshallnot be less than 1mm thick . |
| 47 | All as per item No 46above but as in skirting / dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified |
| 48 | M&L for glazed ceramic coloured tiles (Matt / Gloss finish) of size not less than 300x250x7 mm thick as in vertical surfaces such as on wall ,dado,skirtting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including15 mm thick backing coat on fair faces of brick work in cement mortar1:4 mixed with water proofing compound PD Proof 101 LW (+) of Dr fixit or other equivalant integral water proofing admixture @ 200ml /bag complete all as specified and as directed.Make of tile:- Superior quality tile from Kajaria/Somany/Orient tiles.Note:(a) WPC .PD Proof 101 LW (+) of Dr fixit shall bemeasured and paidseperately under relevant item. (b) Pattern/Texture and finish of walltile shall be approved by GE |
| 49 | M&L for glazed ceramic coloured tiles (Matt / Gloss finish) of size not less than 450x300x7 mm thick as in vertical surfaces such as on wall ,dado,skirtting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including15 mm thick backing coat on fair faces of brick work in cement mortar1:4 mixed with water proofing compound PD Proof 101 LW (+) of Dr fixit or other equivalant integral water proofing admixture @ 200ml /bag complete all as specified and as directed.Make of tile:- Superior quality tile from Kajaria/Somany/Orient tiles.Note:(a) WPC .PD Proof 101 LW (+) of Dr fixit shall bemeasured and paidseperately under relevant item. (b) Pattern/Texture and finish of walltile shall be approved by GE |
| 50 | Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified |
| 51 | M&Lfor chequered cement concrete tiles with grey cementand pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified |
| 52 | M&Lforchequered cement concrete tiles with grey cementand pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified |
| 53 | M & Lfor machine cut kota stone slab inflooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified |
| 54 | M&Lfor 18-20 mm thick Black shade granite slab of approved quality ofany sizebeddedand jointed in greycement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonelaid over and including 15 mm thick screed bed in CM (1:4) including granite polish using by mechanical grinder and moulding edges complete allas specified |
| 55 | M&Lfor 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 grade of approved shape, size and colourconforming to IS 15658-2006including joints filled with sand and stone dust 25m thick as in levelling course of interlockingcomplete all as specified |
| 56 | M&Lfor 80mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 grade of approved shape, size and colourconforming to IS 15658-2006including joints filled with sand and stone dust 25m thick as in levelling course of interlockingcomplete all as specified |
| 57 | S&Fprecast cement concrete 1:2:4 type B1 using 20mm graded stone aggregateas in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM 1:4complete all as specified |
| 58 | M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slabby the following specifications as specified and directed :-(a) Provide PCC 1 : 1.5 : 3 type A0using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compoundmanufactured by Dr FIXIT or other equivalent as approved, finish the surface even & smooth without using extra cement.(b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm oncomplete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (d) applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application complete all as specified and directed. (Note : Floor Area shall be measured for payment). |
| 59 | M&L for grinding & wax polishing the existing to old kota stone slab to obtainmirror finish surfaceas in floor ,stepsetccomplete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for 25mm thick cement concrete 1:2:4 type B0using 12.5mm graded stone aggregate as in roof top etc complete all as specified |
| 61 | M&L for rendering 15 mm thick in cement mortar 1:4on roof surface mixed with WPC as per Manufacturer"s instruction"s and finishing the surfaces even and smooth without using extra cementcomplete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respective item. |
| 62 | Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer"s specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @0.15 Kg/Sqm shall be applied over the APP membrane surface. NOTE:- The work of water proofing treatment shall be got executed only through authorised applicator certified by Manufacturer"s. |
| 63 | Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT |
| 64 | S&F precast cement concrete louvers and jallies 50mm thick (measured solid), using cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate , set in cement mortar (1:4) including all moldings but excluding frame complete all as specified |
| 65 | S& F in repair Rotational moulded Polyethylene water storage tank 500 litrescapacity three layered (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part Icomplete. |
| 66 | All as per item No 65 above but 1000 litres capacity |
| 67 | All as per item No 65 above but 2000 litres capacity |
| 68 | S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc , including taking down old steel tube from site complete all as specified |
| 69 | S&F in repair 15mm bore bib taps chromium platedwith crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrulecompleteall as specified |
| 70 | S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specifiedand directed.Make:Plumber/Essco of Jaguar(Economical range) |
| 71 | S&F in repair CP wall mixer for mixing hot & cold water screwed down for ironpipe 15mm borecomplete all as specifiedand as directed.Make:Plumber/Essco of Jaguar(Economical range) |
| 72 | S&F in repair vitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified |
| 73 | S&F in repair vitreous china squatting pan `Orissa " pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe, lime concrete bedding, "P" or "S" trap complete all as specified |
| 74 | S&Fin repairs PVCvalve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including bracketsand connection to pipe and fixing of chainand pull or lever if any complete all as specified.Make:Plumber/Essco of jaguar(Economical Range). |
| 75 | S&F in repair health faucet with flexible pipe of one meter length including wall hook forEWC complete all as specifiedMake:Plumber/Essco of jaguar(Economical Range) |
| 76 | S&F in repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specifiedMake :Plumber/Essco of jaguar(Economical Range) |
| 77 | S & F in repairs vitreous china wash basin white (oval shaped under counter) of size560 x 410 x 180 mm including 32mm brass CP waste coupling complete all as specified .Make-Plumber/Essco of jaguar(Economical Range) |
| 78 | S & F in repairs vitreous china wash basin white table top of size 460x350 including 32mm brass CP waste coupling and all other fittings complete all as specified .Make-Plumber/Essco of jaguar(Economical Range) |
| 79 | S&F in repair kitchensink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wallor including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified |
| 80 | S&F7 mm thick aluminium coloured power coated grill of Deco Grill pattern DG 104, fixed in aluminium windows / ventilatorsincluding necessary aluminium channels in openings of windows / ventilatorscomplete all as specified |
| 81 | Dismantling of Asbestos cement (corrugated, semicorrugated) sheets in roof coverings complete all as specified |
| 82 | S&F 0.50mm thick (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified |
| 83 | Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified |
| 84 | S&F Mild steel Hollow Sectionwork in tubular trusses, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer using ERW or induction butt welded tubes conforming IS-4963,1993 andIS-1161-1979 grade ST-240 complete all as specified |
| 85 | S&Fmild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 86 | S&F mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165complete all as specified |
| 87 | S&F Mild Steel forJoist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified |
| 88 | M&L for preparation of newsteel surfaces of any description over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide completeall as specified |
| 89 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified |
| 90 | S&F PVC Ceiling Lining(False Ceiling) consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on frame work as per requirement on site complete all as specified and directed. |
| 91 | S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at (approx) 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finishCeiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. |
| 92 | S&FAnodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 93 | S&FExposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified. Note : Frame shall be measured and paid separately under relevant item. |
| 94 | S&F PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, including taking down of old board, complete all as specified and directed. |
| 95 | S&F in repair 100mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified |
| 96 | M&L for PCC 1:3:6 type C2 as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested internal dia of pipe 150mm with specified bedding thickness, etc complete all as specified |
| 97 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate asin precastcoverslab for manholes and soak well cover slab etc set in cement mortar (1:4) etc with and includingnecessary form works and reinforcement complete all asspecified . |
| 98 | M&Lfor plain cement concrete1:3:6 type C2using 40 mm graded stone aggregateas in foundations, filling , mass-concretecomplete all as specified |
| 99 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on planand getting out in hard/dense soil complete all as specified |
| 100 | Excavating over areas not exceeding 1.5 m deep and getting outin hard/dense soil complete all as specified . |
| 101 | Removing excavated soilto a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified |
| 102 | Returing, filling in trenches with soil includingspreading, levelling, watering and well ramming in layers not exc 25 Cmcomplete all as specified |
| 103 | S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed |
| 104 | M&L for 20-25mm Granite/Stone Cladding (of any type) work(table rubbed and polished)as in piIllars/ walls upto 12m heightin cement mortar (1:4) including pointingin white cement (1:2) mixed with marble dust andadmixture of pigment to match with shade of granite including grinding and polishing including necessary scaffolding arrangmentcomplete all as specified .Note:Colour,shade and pattern of granite shall l be approved by GE. |
| 105 | S&F 10-15mm thick Polycarbonate sheet in dome structure/similar condition with rubber neoprene/similar packing material fixed and packed with sheet including dismantling of existing sheeting complete all as specified and as directed. |
| 106 | S&FAluminium Composite Panel (ACP) of any colour of exterior edge for cladding near entrance of Alucobond/Alstrong/Brand approved equivalent make for external wall /column / canopy cladding in combination of solid / Metallic colours, including all necessary frame work and complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface shallbe furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of ECCA /AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure of 150 Kg/Sqm. All hardware shall corrosion resistant frame out of anodised aluminium member. |
| 107 | Taking down Urinal/Urinal Sensor machine, for repairing including providing necessary spare parts such as battery, Sensor part, Wiring etc. as required for smooth functioning and refixing the Urinal/Urinal sensor in the same position complete all as specified and directed by Engineer-in-charge. Make of parts:-Jaquar,CERA,Hindware and Parryware |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
