Rural Development And Panchayats Department has published Tender For Building 1 Work Under MlacdS 2023-24- Palani Block- Tn-05-146. Submission Date for this Tender is 24-01-2024. Building Work Tenders in palani Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jan-2024 | DATE EXTENDED | Date | 24-01-2024 |
| Sl. No. | Item Description |
| 1 | 1.Construction of 60000 litre OHT (12m staging) in III ward at Pachalanaickenpatty H/O Pachalanaickenpatty Estimate Amount Rs.17.00 Lakhs |
| 2 | Earth work excavation & Depositing on bank with Initial lead of 10m and lift & 2m in hard stiff clay, stiff black cotton hard red earth shales, murram, gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B Including all other incidental charges such as slurring strutting, baling out water forming, protective bunds etc., complete for foundation. |
| 3 | First Depth of 2.0 M |
| 4 | Second Depth of 1 m |
| 5 | Filling with good river sand including cost & conveyance of sand and all labour charges etc., complete as per std. Specifications. |
| 6 | Cement concrete 1:4:8 mix using 40mm ISS HBG metal for foundation including cost and conveyance of all materials to site and watering whenever necessary and laid in layers not more than 15cm thick compacting etc., complete complying with std. Specifications and as directed. |
| 7 | Filling with excavated earth other than sand including all labour charges as per standard specification. |
| 8 | Supplying and erecting centering are strutting including neceassary supports for place surface for PCC works erc.,using mild steel angles of sizes 90x60x10cmgauge stiffness welded mild steel angles of sizes 25x25x3mm for boarding laying over silver oak joists of single 10cm -6.5cm space of 75cm centre to centre complete complying with standard specificatinon |
| 9 | PLAIN SURFACE |
| 10 | Below ground level |
| 11 | Ground level to 3.30m above |
| 12 | Above ground level- 3.30m to 4.30m |
| 13 | Above ground level- 5.30m to 6.30m |
| 14 | Above ground level- 8.30m to 9.30m |
| 15 | Above ground level- 11.30m to 12.30m |
| 16 | CURVED SURFACE |
| 17 | 0 to 3.30m - Above ground level |
| 18 | 3.30m to 4.30m- Above ground level |
| 19 | SQUARE COLUMN |
| 20 | Below Ground level |
| 21 | 0m to 3.30m- Above ground level |
| 22 | 3.30m to 4.30m- Above ground level |
| 23 | 4.30m to 5.30m- Above ground level |
| 24 | 5.30m to 6.30m- Above ground level |
| 25 | 6.30m to 7.30m- Above ground level |
| 26 | 7.30m to 8.30m- Above ground level |
| 27 | 8.30m to 9.30m- Above ground level |
| 28 | 9.30m to 10.30m- Above ground level |
| 29 | 10.30m to 11.30m- Above ground level |
| 30 | 11.30m to 12.30m- Above ground level |
| 31 | Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification . The binding wire will be supplied by the contractor as per clause MOST specification. |
| 32 | Reinforced Cement concrete 1: 1 1/2:3 mix using 20mm ISS HBG metalincluding cost and conveyance of all materials to site and watering whenever necessary and laid in layers not more than 15cm thick compacting etc., complete complying with std. Specifications and as directed. |
| 33 | 1.50m to 4.50m below Ground level (Rectangular & Trapezoidal Portion) |
| 34 | 0m to 1.50m below Ground level - For column |
| 35 | 0m to 4.50m above Ground level - For Column brace |
| 36 | 4.50m to 7.32m from ground level - For Grid beam, Floor Slab, Side wall and Haunches |
| 37 | 7.33m to 10.98m from Ground level - For Side wall & Roof Slab |
| 38 | 4.50m to 7.32m from ground level - For Grid beam, Floor Slab, Side wall and Haunches |
| 39 | 7.33m to 10.98m from Ground level - For Side wall & Roof Slab |
| 40 | Provisions for pipe connection arrangements for inlet & outlet scour and overflow etc.,cincluding cost of pipes, specials, valve, labour charges for lifting , aligning, cutting,threading,fixing and painting of GI pipes with two coat of approved quality enamel paint etc.,complete |
| 41 | 80mm GI Scour Pipe, Over flow pipe |
| 42 | 65mm GI Inlet Pipe |
| 43 | 80mm GI Delivery Pipe |
| 44 | 90 mm dia PVC Threaded coupler |
| 45 | 80 mm G.I. Tee |
| 46 | 80 mm G.I. Bend |
| 47 | 80 mmG.I. Elbow |
| 48 | 80 mmG.I. Flange set |
| 49 | 80 mm dia G.I. Hex Nipple |
| 50 | 80 mmG.I. Coupler |
| 51 | 80 mm G.M. Gate Valve with wheel |
| 52 | Provision for Name Board |
| 53 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
