|
| 1 | Picking 5cm to 10cm old metalled surface and sectioning and clearing away from the site and depositing the debris including labour charges for pickingetc., complete as directed by the Engineer as per standard specification and also as per MORTH No.111,112,202 |
| 2 | Work-C |
| 3 | Work- V |
| 4 | Providing and applying Tack Coat over existing bituminous surfaces with Bitumen Emulsion (RS-I type) using mechanical sprayer at the rate of 0.20 kg per sqm on the prepared bituminous surface as directed by the Engineer as per MORTH No. 111, 112, 503, 900 |
| 5 | Work-C |
| 6 | Road- V |
| 7 | Providing and layingBituminous Concrete which work shall consist of construction using coarse aggregates (Table 500-17) premixed with VG 30 Grade Bitumen at the rate of minimum 5.40% by weight of the total mix confirming to the aggregates and binder as per the job mix formula in the Hot mix plant, transporiting the mix to the worksite, laying with paver finisher and compaction with smooth wheeld and vibratory roller in accordance with the requirements of the specification and in confirmity with the drawing as directed by the Engineer for BC (Grade-II) as per MORTH No. 111, 112, 507, 900 |
| 8 | Work-C |
| 9 | Work- V |
| 10 | Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORT&H specification No.803 |
| 11 | Work- A |
| 12 | Work-B |
| 13 | Work-C |
| 14 | Work-D |
| 15 | Work-E |
| 16 | Work-F |
| 17 | Work-G |
| 18 | Work-H |
| 19 | Work-I |
| 20 | Work-K |
| 21 | Work-L |
| 22 | Work-M |
| 23 | Work-N |
| 24 | Work-P |
| 25 | Work-Q |
| 26 | Work-R |
| 27 | Work-T |
| 28 | Work-U |
| 29 | Work- V |
| 30 | Work- X |
| 31 | Work- Y |
| 32 | Providing and fixing reflective road studs of \"category A\" Raised pavement markers made out of poly carbonate / methyl methercrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/ 10/ 97-DO.III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + /- 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + /- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MORT&H specification 804 etc., complete. |
| 33 | Work- A |
| 34 | Work-B |
| 35 | Work-C |
| 36 | Work-D |
| 37 | Work-E |
| 38 | Work-F |
| 39 | Work-G |
| 40 | Work-H |
| 41 | Work-I |
| 42 | Work-K |
| 43 | Work-L |
| 44 | Work-M |
| 45 | Work-N |
| 46 | Work-P |
| 47 | Work-Q |
| 48 | Work-T |
| 49 | Work-U |
| 50 | Work- V |
| 51 | Work-X |
| 52 | Work-Y |
| 53 | Providing and Erecting of Rectro Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67- 2012. The retro reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)60cm equilateral triangle |
| 54 | Work-W |
| 55 | Providing and Erecting of Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67- 2012. The retro reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)60cm circular board |
| 56 | Work-U |
| 57 | Providing and erecting of Retro Reflectorised Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)90cm high octagon board |
| 58 | Work-T |
| 59 | Providing and Erecting of Retro - Reflectorised Hazard Marker Traffic Sign made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956 —09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)30cm x 90cm Rectangular |
| 60 | Work- A |
| 61 | Work-E |
| 62 | Work-F |
| 63 | Work-G |
| 64 | Work-H |
| 65 | Work-I |
| 66 | Work-K |
| 67 | Work-L |
| 68 | Work-R |
| 69 | Road- V |
| 70 | Road- W |
| 71 | Providing and fixing of Retro-Reflectorised cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade sheeting confirming of Type-IV standards of IRC 67: 2012 and ASTM D 4956-09, specification and fixed over a back supportingframe of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75 x 75x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and .30mbelow ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm size including cost and conveyance of all materials equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67: 2012 (as per MORT&H Specification No.801)(With Definition board). (Traiangle Curve & Speed Breaker Board)60cm equilateral triangle |
| 72 | Work-C |
| 73 | Work- V |
| 74 | Work-X |
| 75 | Work-Y |
| 76 | Providing and fixing of Retro - Reflectorised Cautionary, Mandatory and Informatory signs(without definition board) made out of High Inensity Ptismatic Grade Sheeting Conforming to IRC 67-2012 and ASTM D-4956-09,Type IV Specication and fixed over 2 mm thick aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild steel angle and supported on a mild steel angle post 75mmx 75mmx6mm with a clear height of not less than 2.10m from the ground level to the bottom of sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cmx60cm size including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High intensity ratio reflectro sheet shall consist of minimum coefficient retro -reflection as per table 6.6 of IRC67-2012. The retro-reflective sheeting shall be covered under 7 years warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67-2012. (as per MORTH specification No.801)90cm equilateral triangle |
| 77 | Work- A |
| 78 | Work-B |
| 79 | Work-D |
| 80 | Work-E |
| 81 | Work-F |
| 82 | Work-G |
| 83 | Work-H |
| 84 | Work-I |
| 85 | Work-J |
| 86 | Work-K |
| 87 | Work-L |
| 88 | Work-P |
| 89 | Work-S |
| 90 | Work-T |
| 91 | Work-U |
| 92 | Providing and fixing of Retro - Reflectorised Cautionary, Mandatory and Informatory signs(without definition board) made out of High Inensity Ptismatic Grade Sheeting Conforming to IRC 67-2012 and ASTM D-4956-09,Type IV Specication and fixed over 2 mm thick aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild steel angle and supported on a mild steel angle post 75mmx 75mmx6mm with a clear height of not less than 2.10m from the ground level to the bottom of sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cmx60cm size including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High intensity ratio reflectro sheet shall consist of minimum coefficient retro -reflection as per table 6.6 of IRC67-2012. The retro-reflective sheeting shall be covered under 7 years warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67-2012. (as per MORTH specification No.801)60cm x 45cm Rectangular |
| 93 | Work- A |
| 94 | Work-D |
| 95 | Work-E |
| 96 | Work-F |
| 97 | Work-G |
| 98 | Work-H |
| 99 | Work-J |
| 100 | Providing and erecting of Retro Reflectorised Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)60cm x 45cm Rectangular |
| 101 | Work-C |
| 102 | Work-Y |
| 103 | Providing fixing of Median marker double sided made of polycarbonate for impact resistance and good weather ability. Polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperature. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro reflective sheeting confirming to Tpe XI specifications as per ASTM D 4956. Area of reflective sheeting should not be less than 70 cm2 Edge of retro reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification. |
| 104 | Work- A |
| 105 | Work-O |
| 106 | Work-S |
| 107 | Providing and erecting Single sided Double Guard Metal Beam Crash Barrier System 1.70m high, comprising of 3mm thick wall \"W\" beams posts and spacer channels shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip galvanized having Zinc Mass of 550gms/ sqm, minimum 950mm above road/ ground level fixed on ISMC series channel vertical post 150x75x5mm spaced 2m center to center 312mm x 83mm flange width x 3mm thick, 4318mm long post directly embedded in the concrete (M15) pit size 350x350x800mm for a depth of 750mm below ground. All fixing bolts and nuts hot dip galvanized conforming to IS:1367 clause 4.60 all complete as per Technical Specification and as directed by the Engineer-in-charge |
| 108 | Work- A |
| 109 | Work-D |
| 110 | Work-F |
| 111 | Work-W |
| 112 | Providing and erecting of Direction and Place Identification Retro-reflectorised Sign made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thickAluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)Area upto 0.90 sqm Type-IV |
| 113 | Work-N |
| 114 | Supplying and installation of delineators (road way indicators, hazard markers and object markers), 80-100 cm high above ground level, painted at alternatively black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 etc., complete (as per MORT&H specification No. 806) |
| 115 | Work-E |
| 116 | Work-G |
| 117 | Work-J |
| 118 | Work-K |
| 119 | Work-L |
| 120 | Calculation of SubTotal, GST and Total Amount carried out by system automatically |
| 121 | Basic cost of value put to tender as per estimate |
| 122 | Add GST at 18% |
| 123 | Total Value put to Tender |
| 124 | Difference in Value |
| 125 | Bidder quoted value |
| 126 | Add GST at 18% of Final quoted Value |
| 127 | Total Value of Contract Including 18% of GST |
| 128 | Basic cost of value put to tender as per Estimate |
| 129 | Quoted Rate in Figures (Total Value of Contract Including 18% of GST ) |
