National Handloom Development Corporation Limited-NHDC has published Tender For Construction Of Auditorium At Indira Sagar Power Station, Narmada Nagar, Distt Khandwa (M.P.).. Submission Date for this Tender is 12-02-2024. Auditorium Construction Tenders in sagar Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jan-2024 | Addendum 1 Cum Corrigendum 1 | Technical Bid | 05-02-2024 |
| 2 | 05-Feb-2024 | Ext 1 | Date | 12-02-2024 |
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. |
| 3 | Earth work in excavation by mechanical means(Hydraulicexcavator)/manual means over areas (exceeding 30cm in depth.1.5minwidthaswellas10sqmon plan)includingdressingofsidesand rammingofbottomdisposalofexcavated earth,leadupto50mandliftupto1.5m, disposedearthtobelevelledandneatly dressed.(Noextraliftispayableifworkis done by mechanical means) All kinds of soil |
| 4 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and liftup to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock |
| 5 | Filling available excavated earth (excludinghardrock/Ordinaryrock)in trenches, plinth, sidesoffoundationsetc. in layersnotexceeding20cmindepth, consolidatingeachdepositedlayerby ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 6 | Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting(minimumcompaction95%of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm). |
| 7 | Providing and laying in position cement concreteofspecifiedgradeexcludingthe costofcenteringandshuttering-Allwork upto plinth level : With 40mm nominal size graded stone aggregate. M-15 - Grade concrete |
| 8 | Providing and laying in position cement concreteofspecifiedgradeexcludingthe costofcenteringandshuttering-Allwork upto plinth level : With 40mm nominal size graded stone aggregate. M-10Nominal(Mix-1Cement:3sand:6 graded stone aggregate) |
| 9 | Providingandlayinginpositionspecified gradeofreinforcedcementconcrete(with 20mm nominal size graded stone aggregate) excludingthecostofcentering,shuttering, finishingandreinforcement-All workupto plinth level : M-20 Grade Concrete |
| 10 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 11 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. above plinths upto 3.6 m height from plinth level |
| 12 | Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand). |
| 13 | Pre construction antitermite treatment to the building under construction by providing. Stage 1: Treating the bottom and the sides(upto30cmheightoftheexcavated trench@5literspersqmofthesurface area. Stage 2: After masonry/RCC work, the backfillintheimmediatecontactwiththe foundation structure treatment @ 7.5 liters per sqm. Of the vertical surface of the substructure for each side. Stage 3: surface treatment by spreading emulsionovertheplinthareabeforelaying the base concrete under floors @ 5.0 litres/Sqm. Stage 4: Pumping the emulsion in plinth masonry on filling side at floor junction @ 7.5 litres/Sqm. Stage 5: Pumping the emulsion from outer side of the plinth below ground around themasonry@5.0litres/SqmasperI.S. 8944 Emulsion. (1Chlorpyrifos: 19water)withfiveyearsserviceguarantee (Measurements to be taken for plinth area) Note – Treatment should start when foundationtrenchesandpitsarereadyto take bed concrete or leveling course in foundations.Lyingofbedconcreteshould start when the chemical emulsion has been absorbedbythesoilandthesurfaceis reasonablydry.Treatmentshouldnotbe carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. |
| 14 | Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominalsize graded stone aggregate.) |
| 15 | Reinforcedcementconcretework(with20mm nominalsizegradedstoneaggregate)inwalls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete |
| 16 | Reinforcedcementconcretework(with20mm nominal size graded stone aggregate)in beams, suspended floors, roofs havingslope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstaircases above plinth level and upto floor two level excluding the cost of centering, shuttering,finishingandreinforcement inconcrete grade. M-20 Grade Concrete |
| 17 | ReinforcementforR.C.C.workincluding straightening,cutting,bending,placingin positionandbindingincludingcostofbinding wireallwastagesandoverlaps,couplers (overlapsshallbeprovidedasperrequirement of IS 13920 for ductile detalingIS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:- 1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge. 2. No extra payment shall be done for overlaps and/or couplers. 3.CouplersshallbeconformingtoIScodeon “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Thermo-Mechanically Treated bars.FE 500 D or more conforming to IS 1786 |
| 18 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Columns, Pillars , Piers, Abutments, Posts and Struts. |
| 19 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 20 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Lintels, beams, girders, bressumers and cantilevers |
| 21 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Stairs, (excluding landings) except spiral- Staircases. |
| 22 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 75 kg / cm2 average compressive strength. Cement mortar 1:6 (1 cement : 6 sand) |
| 23 | Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level : Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) |
| 24 | Providingandfixingfactorymadesingle extruded WPC(Wood Polymer Composite) solid door/window/ceosetorywindowsandother frames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers(woodpowder/ rice .husk/wheat husk) and non toxic additives (maximum toxicityindexof 12 for 100 gms) fabricatedwithmiterjointsafterapplyingPVC solvent cement and screwed with full body threaded star headed S.S. screws having minimum density of 750 kg/m3 and screw withdrawalstrengthof2200N(Face)&900N (Edge), minimumcompressive strength 58 N/mm2,modulusofelasticity 900N/mm2and resistance to spread of flame of Class A categorywithpropertyof beingtermite/borer proof,water/moistureproofandfireretardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in- Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single or double rebate (125 mm X 65 mm) |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 26 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in charge. |
| 27 | Providingandfixingfactory madeintegralPVC flushdoorshuttermadefromrigidPVCfoam sheet(SingleExtruded)withdensitynotless than 600 kg/cum, conforming to IS: 2380 part 14 forscrewholdingstrengthwithCellukafinish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 - 2000 certified company. 28 to 30 mm thick plain solid PVC flush door shutter |
| 28 | ProvidingandfixingISImarkedstainlesssteel handles with necessary screws etc. complete : 125 mm |
| 29 | ProvidingandfixingISImarkedstainlesssteel slidingdoorboltswithnutsandscrewsetc. complete: 300x16mm |
| 30 | ProvidingandfixingISImarkedstainlesssteel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm |
| 31 | Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. |
| 32 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed onthebody,doorweightupto36kgto80kg and door width from 701 mm to 1000 mm) with doublespeedadjustmentwithnecessary accessories and screws etc. complete. |
| 33 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conformingtoIS:6315,havingbrandlogo embossed on the body /platewithdoublespringmechanismanddoor weight upto 125 kg., for doors, including cost of cuttingfloors,embeddinginfloorsasrequired andmakinggoodthesamematchingtothe existingfloorfinishingandcoverplateswith brasspivotandsinglepieceM.S.sheetouter boxwithslideplateetc.completeasperthe direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness |
| 34 | Providing and fixing Brass 100 mm mortice latch andlockwith6leverswithoutpairof handles(best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 35 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, includingapplyingaprimingcoatofapproved steel primer. M.S. tube. |
| 36 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) |
| 37 | 12 mm cement plaster of mix : 1:6 (1 cement : 6 sand) |
| 38 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 sand) |
| 39 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 40 | ProvidingandfixingCeramicglazedwalltiles 300x450mmormore(havingthickness6to7 mm)of1stqualityconformingtoIS:15622of approvedmakeinallColours&shades,except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)prepradsamedaywhenmortarisstill greenjointedwithgreycementslurry@3.3kg per sqm includingpointingthejointswithwhitecement and matching pigments etc., complete. |
| 41 | ProvidingandlayingCeramicglazedfloortiles 300x300mmormore(havingthickness6to 7mm) of 1st quality conforming to IS : 15622 of approvedmakeinanycoloursandshadelaid on20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand)includingpointingthejointswithwhite cement and matching pigment etc., complete. |
| 42 | Providing and layingvitrified floor tiles Multi/Doublecharged(Minimumtoplayer thickness 2.0mm) Neno Polished self design, in differentsizewithwaterabsorptionless than0.05% and conforming to IS:15622 of approvedmakeinallcolours&shades,quality/ premiumqualityinflooringlaidon12mmthick cementmortar1:4(1cement:4sand)including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm |
| 43 | Providing and layingvitrified floor tiles Multi/Doublecharged(Minimumtoplayer thickness 2.0mm) Neno Polished self design, in differentsizewithwaterabsorptionlessthan 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premiumquality in skirtinglaid on 12mmthick cementmortar1:4(1cement:4sand)including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm |
| 44 | Supply and Installation of Teak wood flooring system for Auditorium Stage / Sports flooring SURFACE BOARD: - Teak Wood Sports Flooring - Grade 1”LABO SPORTS Test Certify finished with 21 mm thick, 55 to 85mm wide and in random length in tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti-termite and water- resistant lacquer. THE UNDER FRAME: - Resilient SPF Pine Wood sleeper subfloor of 70 mm x 45 mm, treated with anti-termite solution and fixed on the bottom side with 10 mm thick EPDM rubber pads, stapled through the two wings at 350mm x 350 mm. INSTALLATION: - IPS subfloor treated with a vapour barrier to be placed on the levelled IPS subfloor before laying the under frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove ofadjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. The expansion of 12-15 mm will be left open between the wooden flooring and the surrounding. Note:- The item shall be executed only after the permission of Chief Engineer/ Additional Project Director. |
| 45 | ProvidingandlayingGranitestoneflooringin required design and patterns in linear as well as curvilinearportionsofthebuildingallcomplete asperthearchitecturaldrawingswith18mm thickstoneslabover20mm(average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade includingrubbing,curingandpolishingandas directed by the Engineer-in-Charge Granite stoneslabDarkBlack.DarkRed,Whiteor equivalent, Flamed Finish Granite |
| 46 | Providing edge moulding to 18mmthick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. |
| 47 | Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinylStretch Tracks half wrap/ full wrap 25mm and Midseam 25mm , strand, synth PF with requisite accessories and tools.Woodenbase 10mm is first installed on the wall along the marking lines with metal fasteners at 300mm centers. Tracks to be installed on wooden base, by using Base tape (by removing the protective cover) fora true and continuous secure grip, and heavy-duty fasteners at 15mm centers on one/both sides of Stretch Tracks. Strand square edge magnesite bonded wood fiber panels of size 600x1200x15mm having density 400kg/m3, weight 4- 8kg which is fixed to wall. Synth PF 10x10mm thickadhered on strand panel by using Stick 7 adhesive. Fabric of width 1700mmis then aligned to the Stretch tracksby followingthe fabricthread line or pattern.The fabricis stuckon the AlignTape(byremovingtheprotectivecover)atthesametimeasbeing stretched and tucked into the Stretch tracks and secure into the locking jaws so thatitwillbesmooth,freeofwrinkleswiththetuckingtools.Note-minimum 50mmadditionalfabricisrequiredfortuckinghencemaximummodulewidth would be 1600mm |
| 48 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. |
| 49 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658- 2006 made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction byusing plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand including locking with M15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer"s specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade |
| 50 | Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Plank will be manufactured on advanced CAD/CAM equipment that includes several levelling stages in the manufacturing process. Torsion Spring panel with two side legs die formed and two end legs die formed and punched to receive torsion springs (min two springs each end or side) for secure engagement into Tee Grid main runners which are factory punched to receive torsion springs. Tiles will be square edged. The Plank shall be Polyester powder coated in whitecolour (RAL 9010).The panels will be pre-treated in latest Nano technology process and electro statically powder coated with automatic Caroni system and cured with gas catalytic technology. Main runners 24mm deep, inverted “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Plank of 600mm wide ,1200 mm long and 0.6mm thick |
| 51 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 53 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. |
| 54 | Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 55 | Finishingwallsbyanymechanicalormanual meanswithPremiumAcrylicSmoothexterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including onecoatundilutedexteriorwaterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with anelongationof150%andwaterproofingof upto 3 bars on vertical surface) |
| 56 | Providingandfixingaluminiumworkfordoors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sectionsandothersectionsofapprovedmake conformingtoIS:733andIS:1285,fixingwith dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e.attop,bottomandsideswith requiredEPDMrubber/neoprenegasketetc. Aluminiumsectionsshallbesmooth,rustfree, straight,mitredandjointedmechanically wherever required including cleatangle, Aluminiumsnapbeadingforglazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions ofEngineer-in-charge.(Glazing,panelingand dashfastenerstobepaidforseparately): For Fixed Portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 57 | Providingandfixingaluminiumworkfordoors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sectionsandothersectionsofapprovedmake conformingtoIS:733andIS:1285,fixingwith dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e.attop,bottomandsideswith requiredEPDMrubber/neoprenegasketetc. Aluminiumsectionsshallbesmooth,rustfree, straight,mitredandjointedmechanically wherever required including cleatangle, Aluminiumsnapbeadingforglazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions ofEngineer-in-charge.(Glazing,panelingand dashfastenerstobepaidforseparately): For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required(Fittings shall be paid for separately). Powdercoatedaluminium(minimumthickness of powder coating 50 micron) |
| 58 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With floatglass panes of 5.00 mm thickness (weight not less than 12.5 Kg/Sqm) |
| 59 | Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183 density 24kg/m3, 50mm thick, wrapped in aluminium foil laminated placed over matel mesh between the gape of purlin and sheet with wire mesh of 12.5mm x24 gauge wire mesh, using self drilling/ self taping screws of size (5.5x55mm), EPDM seal. Providing and fixing under deck fiber glass wool insulation |
| 60 | Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washersetc. complete Hot finished welded type tubes |
| 61 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² |
| 62 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or Strap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures completeincluding cutting and making good thewalls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 63 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required Range ofthreehalfstallurinalswith10 litre P.V.C. automatic flushing cistern. |
| 64 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 65 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 66 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm. |
| 67 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 68 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. |
| 69 | Providing and fixing toilet paper holder : C.P.BRASS |
| 70 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighingnot less than 105 gms. |
| 71 | Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer- in- Charge.Concealed work including cutting chases and making good the walls etc 15 mm nominal outer dia .Pipes. |
| 73 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer- in- Charge.Concealed work including cutting chases and making good the walls etc 20 mm nominal outer dia .Pipes. |
| 74 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia. nominal bore |
| 75 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 32 mm dia. nominal bore |
| 76 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. External work : including trenching and refilling etc. 50 mm dia. nominal bore |
| 77 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore. |
| 78 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. |
| 79 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore |
| 80 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore. |
| 81 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore |
| 82 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15mm nominal bore |
| 83 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100mm dia |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 85 | Providing and fixing square-mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks |
| 86 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design :Withwell burnt bricks |
| 87 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly. 150mm dia |
| 88 | Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design 150mm dia |
| 89 | Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion . 110 mm diameter (minimum wall thickness 2.2 mm) |
| 90 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming toIS : 5382 leaving 10 mm gap for thermal expansion.75 mm diameter (minimum wall thickness 1.8mm) |
| 91 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Plain Bend 87.5: 75 mm bend (minimum wall thickness 1.8 mm) |
| 92 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Plain Bend 87.5: 110 mm dia band (minimum wall thickness 2.2 mm) |
| 93 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Shoe (Plain) 110 mm she (minimum wall thickness 2.2 mm) |
| 94 | Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (minimum wall thickness 2.2mm) |
| 95 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore |
| 96 | Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS:specification. 15 mm nominal bore. . |
| 97 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. |
| 98 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stoneaggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : Withwell burnt bricks |
| 99 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stoneaggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : Withwell burnt bricks |
| 100 | Extra for depth for manholes Size 90x80 cm Withwell burnt bricks |
| 101 | Extra for depth for manholes Size 120x90 cm Withwell burnt bricks |
| 102 | Internal Furnishing |
| 103 | Supplying,installation of Stage Wing panel madeout from 25mm x 50mm of 16 swg MS pipe duly painted in black colour with 6mm commercial ply on one side withglazed curtain cloth / thick cloth having manual moving facitlity. |
| 104 | SupplyinginstallationofFrillsmadeoutfromBlackcotton,clothsuspendedfrom overhead 32mm dia MS pipe (Size of 4ft.) |
| 105 | Supply and installation of cushioned chair with push back and with writing padon concrete base for auditorium only furniture works |
| 106 | Internal Electrification works |
| 107 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories. Light point/fan points. Primary short point |
| 108 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories. Light point/fan points. Primary medium point |
| 109 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories. Light point/fan points. Primary long point |
| 110 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.(Light point/fan points) looping point, Secondary short point |
| 111 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.(Light point/fan points) looping point, Secondary medium point |
| 112 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.(Light point/fan points) looping point, Secondary long point |
| 113 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories. 3 Pin 6 Amp socket outlet on separate board, Short point |
| 114 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.3 Pin 6 Amp socket outlet on separate board, Medium point |
| 115 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.3 Pin 6 Amp socket outlet on separate board, Long point |
| 116 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.Call bell/buzzer points, Medium point |
| 117 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.Call bell/buzzer points, Long point |
| 118 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsetc. as required as per specification for :-Using modular accessories.Twin control light points, Long point |
| 119 | Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board. |
| 120 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm. |
| 121 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification 4x2.5 Sq.mm. |
| 122 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification 6x2.5 Sq.mm. |
| 123 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification 8x2.5 Sq.mm. |
| 124 | Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsas per specification for :-Using modularaccessories, On separate board, Short point |
| 125 | Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsas per specification for :-Using modularaccessories, On separate board, Medium point |
| 126 | Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsas per specification for :-Using modularaccessories, On separate board, Long point |
| 127 | Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsas per specification for :-Using modularaccessories, On separate board, Extra long-I |
| 128 | Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsas per specification for :-Using modularaccessories, On separate board, Extra long-II |
| 129 | Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for jointsas per specification for :-Using modularaccessories, On separate board, Extra long-III |
| 130 | Same board switch & socket 16 Amp./S.S. combined 20/16/6 Amp |
| 131 | Supply and fixing PVC conduit required conformity to IS: 9537 (Part 3) ISI marked FRLS along with the accessories in concealed system etc. as required, PVC. conduit 20 mm (HMS) |
| 132 | Supply and fixing PVC conduit required conformity to IS: 9537 (Part 3) ISI marked FRLS along with the accessories in concealed system etc. as required, PVC. conduit 25 mm (HMS) |
| 133 | Supply and fixing PVC conduit required conformity to IS: 9537 (Part 3) ISI marked FRLS along with the accessories in concealed system etc. as required, PVC. conduit 32 mm (HMS) |
| 134 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- 1 Or 2 Module metal box |
| 135 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:-3 Module metal box |
| 136 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- 4 Module metal box |
| 137 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- 6 Module metal box |
| 138 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- 8/9 Module metal box |
| 139 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- 12 Module metal box |
| 140 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- 16 Module metal box |
| 141 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- 18 Module metal box |
| 142 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification., 1.5 sq. mm. wire, 1 X 1.5 sq. mm. |
| 143 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification., 1.5 sq. mm. wire, 2 X 1.5 sq. mm. |
| 144 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification., 1.5 sq. mm. wire, 3 X 1.5 sq. mm. |
| 145 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification., 2.5 sq. mm. wire, 1 X 2.5 sq. mm. |
| 146 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification., 4.00 sq. mm. wire, 3 X 4.00 sq. mm. |
| 147 | Wiring for sub-mains with PVC insulated cable FRLS with copper multi strand conductor ISI marked in recessed/concealed rigid PVC conduit (HMS) FRLS ISI marked of suitable size (conduit included) including 2mm thick accessories, connection etc, as required as per specification. (Refer General Notes for Classification of Conduit Wiring Point No.11), 4 Wire sub main, 6.0 sq. mm. cable |
| 148 | Wiring for sub-mains with PVC insulated cable FRLS with copper multi strand conductor ISI marked in recessed/concealed rigid PVC conduit (HMS) FRLS ISI marked of suitable size (conduit included) including 2mm thick accessories, connection etc, as required as per specification. (Refer General Notes for Classification of Conduit Wiring Point No.11), 4 Wire sub main, 10.0 sq. mm. cable |
| 149 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal -magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2, MCCB 25kA current rating - 63 to100Amp & adjustable overload setting 80% -100% of In, adjustable short circuit setting 6-10 In 3 Pole |
| 150 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal -magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2, MCCB 25kA current rating - 125Amp & adjustable overload setting 80% - 100% of In, adjustable short circuit setting 6-10 In 3 Pole |
| 151 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal -magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2, MCCB 25kA current rating - 160Amp & adjustable overload setting 80% - 100% of In, adjustable short circuit setting 6-10 In 3 Pole |
| 152 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal -magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2, MCCB 36kA current rating - 400Amp & adjustable overload setting 80% - 100% of In, adjustable short circuit setting 6-10 In 3 Pole |
| 153 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of "C" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole, MCB SP 0.5Amp to 5Amp 10kA rating |
| 154 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of "C" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole, MCB SP 6Amp to 32Amp 10kA rating |
| 155 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of "C" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Double pole, MCB DP 6Amp to 32Amp 10kA rating |
| 156 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of "C" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- For Triple pole, MCB TP For 40Amp 10kA rating |
| 157 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of "C" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- For Triple pole, MCB TP 50Amp to 63Amp 10kA rating |
| 158 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of "C" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Four pole, MCB FP For 40Amp 10kA rating |
| 159 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of "C" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Four pole, MCB FP 50Amp to 63 Amp 10kA rating |
| 160 | Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator)- 8 Way double door IP 43 protection |
| 161 | Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator)- 12 Way double door IP 43 protection |
| 162 | Supplying of approved make TPN MCB DB metal double door IP 43 protection with provision for FP MCB/ Isolator/ RCCB/ RCBO as incomer and SP MCBs as outgoing inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator): 4 Way (8+12) |
| 163 | Supplying of approved make TPN MCB DB metal double door IP 43 protection with provision for FP MCB/ Isolator/ RCCB/ RCBO as incomer and SP MCBs as outgoing inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator): 6 Way (8+18) |
| 164 | Supplying of approved make TPN MCB DB metal double door IP 43 protection with provision for FP MCB/ Isolator/ RCCB/ RCBO as incomer and SP MCBs as outgoing inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator): 8 Way (8+24) |
| 165 | Supplying of approved make, powder coated metal double door vertical TPN MCB DB IP43 protection with provision for MCCB upto160A TP/FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB/MCBs) inclusive of busbar & connections etc, 8 Way without MCCB |
| 166 | Supplying and installing of RCBOs (Residual current circuit breaker with overload and short circuit protection) ISI marked complete as per I.S. standard conforming to IEC:61009-1 & IS:12640-2, 240/415V 50 Hz with 10 kA short circuit withstand capacity for earth leakage, overload & short circuit protection including connection in existing enclosure in approved manner as per specification., DP (4 module), 2 pole 6Amp to 25Amp, 30 mA sensitivity |
| 167 | Supplying and installing of RCBOs (Residual current circuit breaker with overload and short circuit protection) ISI marked complete as per I.S. standard conforming to IEC:61009-1 & IS:12640-2, 240/415V 50 Hz with 10 kA short circuit withstand capacity for earth leakage, overload & short circuit protection including connection in existing enclosure in approved manner as per specification., FP (8module), 4 pole 63Amp, 30mA sensitivity |
| 168 | Fixing of MCB/MCCB/Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (labour only) MCB/Isolator SP/DP |
| 169 | Fixing of MCB/MCCB/Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (labour only) MCB/MCCB Isolator TP/TPN/FP |
| 170 | Labour charges for fixing sheet steel enclosures, MCB/MCCBDB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc. complete For item no :- 161 to 164 |
| 171 | Labour charges for fixing sheet steel enclosures, MCB/MCCBDB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc. complete For item no :- 165 to 166 |
| 172 | Supply and fixing as per specification call bell/buzzer of approved make with necessary materials complete. Buzzer |
| 173 | Supply and fixing as per specification call bell/buzzer of approved make with necessary materials complete. Ding dong bell |
| 174 | Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt(2 module) |
| 175 | Supply and fixing as per specification 6Amp 250Volt bell push switch of approved make ISI marked with necessary material complete. 6/10Amp SP 250 Volt modular switch bell push |
| 176 | Supplying & fixing of approved make Industrial type metal plug & socket DBs(without MCB) SPN sheet encloser (dust protected) inclusive of 2 pole and earth metal plug and socket and space to incorporate SP MCB complete as per specification as required. 20 Amp |
| 177 | Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments. Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m³/min and service value = 4.00 as per BEE.. |
| 178 | Supplying, erection and testing of approved make wall mounting fan oscillating type with base, blades, guard, speed regulator etc. AC 230- 250 volts with connections and including raw bolt/anchor hole fastener etc. complete finished and as required. 300 mm sweep |
| 179 | Supplying, erection and testing of approved make "Fresh air fan" AC 230- 250 volts with connection and including frame bolt/anchor hole fasteners etc. complete finished and as required. 300 mm sweep bush type |
| 180 | Supplying and fixing of deluxe fresh air fan with louvers (ventilating fan) with self-closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required. 300mm RPM1300/1400 |
| 181 | Supplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required. 300mm sweep RPM 900 / 1400 |
| 182 | Supplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required. 380mm sweep RPM 900 /1400 |
| 183 | Supplygand ifixingiM.S. down trod 14 SWG (2mm) thick for ceiling fan including threading, painting, making holes etc. as required complete. Note: For new works difference of installed & standard down rod length shall be paid. |
| 184 | Supply and fixing Led tube rod comprising of LED tube with non- integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body, PC diffuser. |
| 185 | Supply and fixing of recessed mounting type Led light fixture, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF> 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.. LED luminiare 2" X 2", 36Watt, color temp 3000-6500k as required. |
| 186 | Supply and fixing of surface mounting type LED light fixture, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K& having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver, PF> 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. LED luminiare 2" X 2", 36Watt, color temp 3000-6500k as required. |
| 187 | Supply and fixing of surface mounting type LED light fixture, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K& having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver, PF> 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. LED luminiare 2" X 2", 45Watt, color temp 3000-6500k as required. |
| 188 | Supply and fixing recessed mounting LED down lighter, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF > 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 3 Watt, color temp 3000-6500k as required. |
| 189 | Supply and fixing recessed mounting LED down lighter, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF > 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.. 7/8/10 Watt, color temp 3000-6500k as required. |
| 190 | Supply and fixing recessed mounting LED down lighter, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF > 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.. 14/15 Watt, color temp 3000-6500k as required. |
| 191 | Supply and fixing surface mounting LED down lighter, LED of 1 to 3Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF > 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79- 08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 14/15 Watt, color temp 3000-6500k as required. |
| 192 | Supply and fixing in position LED lamp of approved make, 15 Watt 250Volt |
| 193 | Providing and fixing circular/hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. |
| 194 | Providing recess in brick wall suitable for erecting of exhaust fan up to 450 sweep complete with grouting of nut bolts, plastering and colour wash to match the colour of wall. For wall thickness upto 9" |
| 195 | Supply and drawing PVC insulated copper cable (earth continuity conductor) of green colour FRLS with copper multi strand conductor ISI mark in existing conduit along with other wires as required as per specification : 6 sq. mm. |
| 196 | Supply and drawing PVC insulated copper cable (earth continuity conductor) of green colour FRLS with copper multi strand conductor ISI mark in existing conduit along with other wires as required as per specification : 10 sq. mm. |
| 197 | Supplying and drawing co-axial T.V. cable RG-6 Grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tined copper braid and protected with PVC sheathed in existing surface/concealed, steel/PVC conduit as required. |
| 198 | Supply, fixing and testing of T.V. OutletModular (1Module) |
| 199 | Supplying & installing G.I. pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc. complete in an approved manner as required to complete excluding cost of excavation/dismantling & other finished masonry Item complete. For "B" class pipe ISI marked (IS-1161-68) 50.00mm |
| 200 | Supplying & installing G.I. pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc. complete in an approved manner as required to complete excluding cost of excavation/dismantling & other finished masonry Item complete. For "B" class pipe ISI marked (IS-1161-68) 100.00mm |
| 201 | Supplying & installing G.I. pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc. complete in an approved manner as required to complete excluding cost of excavation/dismantling & other finished masonry Item complete. For "B" class pipe ISI marked (IS-1161-68) 150.00mm |
| 202 | Supply and laying rigid PVC single socket and, non-metallic pipe ISI marked (IS-4985-2000) 10 Kg/sq.cm class 5 for protection of underground cable/or for water pump delivery side, for water supply complete with necessary clamp coupler, band, tee, elbow etc. in an approved manner excluding cost of excavation etc. 110.00mm O.D |
| 203 | Supply and laying rigid PVC single socket and, non-metallic pipe ISI marked (IS-4985-2000) 10 Kg/sq.cm class 5 for protection of underground cable/or for water pump delivery side, for water supply complete with necessary clamp coupler, band, tee, elbow etc. in an approved manner excluding cost of excavation etc. 160.00mm O.D |
| 204 | Supplying & fixing of fire extinguisher/refills as per IS specification. ABC type duly refilled 6 Kg & ready to use |
| 205 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor. 4 core armoured - 185 sq. mm. |
| 206 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor. 4 core unarmoured - 10 sq. mm. |
| 207 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor. 4 core unarmoured - 16 sq. mm |
| 208 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor. 4 core unarmoured - 25 sq. mm |
| 209 | Laying of one number armoured / unarmoured cable 1.1.KV grade of size exceeding 120 sq. mm. but not exceeding 400 sq. mm direct in ground including excavation in all soil/ murrum /soft rock, and sand cushioning protective covering and refilling the pit etc. as required. |
| 210 | Laying of one number armoured / unarmoured power cable 1:1 KV grade of size not exceeding 25 sq. mm in the existing RCC hume/stone ware/G.I. pipe/surface in existing trench as required. |
| 211 | Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer, rubber ring complete erected with cable and lead connection etc. as per specification complete, GLAND- Gland size 70 mm, 3 x 240 sq. mm, 3½ x 300 sq. mm |
| 212 | Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cable with alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B./M.C.B. etc. as required complete., Crimping type alum. Lugs - 180 sq. mm |
| 213 | Supplying & fixing pin terminal lugs as per ISS specification suitable for cable evenly cramped with high pressure tool & connection to switch gear terminal as required complete., Aluminum lugs pin type - Upto 16 sq. mm conductor |
| 214 | Supplying & fixing pin terminal lugs as per ISS specification suitable for cable evenly cramped with high pressure tool & connection to switch gear terminal as required complete., Aluminum lugs pin type - Upto 25 sq. mm conductor |
| 215 | LT panel - Supply, fixing, testing & commissioning wall/floor mounted LT panel primer coated with powder coated paint & provided with required gasket for dust/vermin proof with degree of protection IP42 suitable for 415Volt 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet upto 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Metre, Volt Metre, selector switches, frequency Metre, phase indicating lamp, Energy Metre complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs, ACB, panel mounted changeover switch/SFUs, etc. as required but excluding cost of busbar strips, Ampere Metre, Volt Metre, selector switch as per approved design & specification |
| 216 | LT panel accessories - Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification., Digital Ampere Metre with CTs with selector switch |
| 217 | LT panel accessories - Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification., Digital Volt Metre with selector switch & HRC fuse |
| 218 | LT panel accessories - Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification., Copper bus bar strips with PVC sleeves |
| 219 | LT panel accessories - Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification., LED lamp indicator |
| 220 | Street light with high power LED system - Supply and fixing street light with high power LED of 3 to 6 W each on existing bracket assembled on single MCPCB, system lumens output with efficacy>120 lm/W. luminiare having color temp upto 6500K & 50000 burning hrs. life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF> 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass/Lens type, IP65 protection.Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. tom complete the job., 24Watt to 25Watt, color temp 3000-6500k as required. |
| 221 | Fixing of street light fitting - Fixing of street light bracket of required angular shape and size pipe bracket on wall/pole including M.S. clamp not less than 40X5mm flat, nut, bolt 12mm of required length with necessary material including connection 3 core flexible wire etc. complete as required excluding cost of pipe paid separately. |
| 222 | 19/20mm dia. M.S. pipe 1 meter in length for lights - Supplying and fixing of 19mm/20mm dia. M.S. pipe 1 meter in length for CFL/LED street light/bulkhead/water tight bracket including bending to shape and wiring with 1.5sqmm W.P./PVC wire etc. as required. |
| 223 | Earthing with G.I. earth plate 600mm X 600mm X 6mm thick Including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required |
| 224 | Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required |
| 225 | Add extra for using salt and charcoal/coke for G.I. plate or copper plate earth electrode as required including excavation in hard rock and refilling the pit with black soil. |
| 226 | 25x5 mm G.I. strip on surface - Providing and fixing 25mm X 5mm G.I. strip on surface or in recessed for connection etc. as required. |
| 227 | 25x5 mm Cu strip - Providing and fixing 25mm X 5mm copper strip in 40 mm dia G.I. Pipe from earth electrode as required |
| 228 | Fire Detection |
| 229 | Fire panel : Providing, fixing, testing & commissioning microprocessor based main fire alarm panel and indicating panel solid state modular card type pulsar, timer for dual stage alarm facility with indicators, standby battery ,complies to IS 2189:1999.2 x 16 character backlit LCD display lamp test features. Complete with integral power supply and battery charger for SMF battery. NO/NC contacts for both fire and fault. Switches to enable on board operation. LCD and LED Indication for open, shortcircuit, Isolate, fire in each zone. reset, lamp test, silence, isolate, short, open, fire continuous buzzer for fault and intermittent buzzer for fire battery charger box, operating voltage 220 Volt mains A.C. input/24V D.C. output etc. complete in all respect., 8 zone fire panel |
| 230 | Smoke detector (ionization type) : Providing & fixing of ionization type smoke detectors as per IS: 11360-1985 of dual chamber, 12/24 volt DC, ionization source-less than one micro curie maximum Americium 241, twin visual alarm indicator (LED"s) "Blink" in stand by and "steady" in alarm complete in all respects. |
| 231 | Smoke detector (optical type) : Providing & fixing of optical type smoke detector as per IS:11360-1985 of photo-optic sensing chamber, 12/24 volt DC, ionization source-less than one micro curie maximum Americium 241, twin visual alarm indicator (LED"s) "Blink" in stand by and "steady" in alarm complete in all respects. |
| 232 | Heat detector : providing & fixing of heat detector based on heat rate-of- rise/fixed temperature with working voltage 9-33V DC twin visual alarm indicator (LED"s) "Blink" in stand by and "steady" in alarm complete in all respects. |
| 233 | Beam detector: Providing & fixing of beam detector including mounting base along with Interface module to direct connect to the loop, having a coverage area with a distance of min. 10 m and max. 100 m with extra width of up to 14 m, operating temperature range: -20 C to +55 C, response sensitivity of 40% |
| 234 | R.I. : Providing & fixing of response indicator |
| 235 | Manual call point: Providing & fixing of manual calls point flush or surface mounting. Front protection glass cover. Unbreakable glass ABS plastic body. |
| 236 | Internal hooter: Providing &fixing of internal hooter with working AC Voltage 220V A.C./24V D.C. current consumption, sound output 120 DB, material M.S. sheet. |
| 237 | Industrial hooter: Providing & fixing of industrial hooter speaker horn type ABS body with working AC Voltage 220V A.C./24V D.C. current consumption, sound output 120 DB, material M.S. sheet. |
| 238 | Supply of XLPE insulated 1.5 sq. mm. Armoured 2 core FRLSZH fire alarm cable (RED) Fire Survival Cable conforming IS-7098 (Part-1) 1988, 1100 Volt grade, 2/3/4/8/10/12 core ISI marked with copper stranded/solid conductor. |
| 239 | Supply and fixing PVC conduit ISI marked FRLS along with the accessories in concealed system etc. as required, PVC. conduit 25 mm (HMS) |
| 240 | AUTOMATIC FIRE DETECTION AND SUPPRESSION SYSTEM Supply, fixing, testing and commissioning of automatic linear pneumatic tube detection based NOVEC 1230/System for electrical panels consisting of the following components: 5 LB capacity NOVEC 1230, DLP assembly with automatic valve, push in connector for tube, 5 LB NOVEC 1230 gas, mounting bracket, end of line adopter and low pressure switch for monitoring system activation. |
| 241 | AUTOMATIC FIRE DETECTION AND SUPPRESSION SYSTEM Supply, fixing, testing and commissioning of automatic linear pneumatic tube detection based NOVEC 1230/System for electrical panels consisting of the following components: Linear pneumatic heat detection tube with all necessary fittings & supports. |
| 242 | AUTOMATIC FIRE DETECTION AND SUPPRESSION SYSTEM Supply, fixing, testing and commissioning of automatic linear pneumatic tube detection based NOVEC 1230/System for electrical panels consisting of the following components: Master control unit with audio visual alarm with wiring to make complete system operational. The control panel should have provision for integration with fire alarm/SCADA/BMS system. |
| 243 | HVAC |
| 244 | VRV/VRFoutdoor ACunit:-Supplyinstallation testingandcommissioningofVRV /VRF/MRV outdoor units with followingmultiple inverter based scrolltype compressors, electronicexpansion valve, R 410A/ecofriendly green refrigerant, cooling & heating modebothoptions,specialpre-coatedfin type heat exchanger, low noisedirect driven propellercondenserfansineachmodulewithtop discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48deg.C&heating within 0deg. Cto15deg. C, COP not less than 3.3.Each system should have the provision to combine maximum 3 nos compressor in eachoutdoorunit,everysingleoutdoorunit should nothavemorethan maximumCapacity20HP(3 phase) each compressor complete as per specification. Outdoor/indoor units should be of same make (brand). (Single phase/three phase). 20 HP |
| 245 | VRF/VRV indoor ACunit (wall mounted) Supply installation testing and commissioning of wall mounted indoor split unit comprising of copper evaporator,electronic expansion valve, blower, motor, filter pad, auto air swing louvers, and temperature & on/off display with provision of discharge angle setting by wireless remote controller includinginternalwiring,controls completeasper specification. (Single phase/three phase) 1.33TR |
| 246 | VRF/VRV indoor AC unit (mid - static ductable) Supply,installation,testingandcommissioningof high static ductable type comprising of copper evaporator,electronic expansion valve, blower, motor,filterpad,with inbuilt drainpump including internal wiring, controls with cordless remote. (Single phase/three phase). 5.4 TR |
| 247 | VRF/VRV indoor AC unit (mid - static ductable) Supply,installation,testingandcommissioningof high static ductable type comprising of copper evaporator,electronic expansion valve, blower, motor,filterpad,with inbuilt drainpump including internal wiring, controls with cordless remote. (Single phase/three phase). 8.19 TR |
| 248 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 34.9 mm O.D. wall thickness 1.4mm(insulation– =19 mm thick) |
| 249 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 28.6 mm O.D. wall thickness 1.2mm(insulation– =19 mm thick) |
| 250 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 22.2 mm O.D. wall thickness 1.0mm(insulation– =19 mm thick) |
| 251 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 19.1 mm O.D. wall thickness 1.0mm(insulation– =13 mm thick) |
| 252 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 15.9 mm O.D. wall thickness 0.8mm(insulation– =13 mm thick) |
| 253 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 12.7 mm O.D. wall thickness 0.8mm(insulation– =13 mm thick) |
| 254 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 9.5mm O.D.wall thickness 0.8mm(insulation– =13 mm thick) |
| 255 | Copper piping Supply,installation,testingand commissioning of interconnecting copper refrigerant pipe work(19mm/13mmthick)dulyinsulatedwith elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. Andexposedpipingshouldbe wrappedwithglass woven clothandlagcoatingforvapourbarrierand weatherprotection. Joints shallbe covered with nitrilerubbertapeof3mmthickcompleteasper specification. 6.4mm O.D.wall thickness 0.8mm(insulation– =13 mm thick) |
| 256 | Drain piping Providing and fixingof CPVC, 6Kg/cm2drainwaterpipingwithfittings,support and insulatedwith 6mm thick closedcell elastomeric nitrile rubberinsulation complete as per specification. 25 mm dia ID |
| 257 | Drain piping Providing and fixingof CPVC, 6Kg/cm2drainwaterpipingwithfittings,support and insulatedwith 6mm thick closedcell elastomeric nitrile rubberinsulation complete as per specification. 32 mm dia ID |
| 258 | Drain piping Providing and fixingof CPVC, 6Kg/cm2drainwaterpipingwithfittings,support and insulatedwith 6mm thick closedcell elastomeric nitrile rubberinsulation complete as per specification. 40 mm dia ID |
| 259 | Refrigerant Supplyandadditionalrefrigerant chargeofrefrigerantR410/410A&equivalentEco friendly green gas to compensate the additional pipingdoneatsiteforallsystems including testing commissioning as required, |
| 260 | Y joints Supply, installation, testing & commissioningofrefnut/Y-jointsbrassforindoor and outdoor units of suitable size as per requirement, |
| 261 | Ducting Supply andfixingof site fabricated GI sheetmetalductsinaccordance with the approved shop drawings and as required as per specifications. GI sheet will be as per IS-277. All necessary GI /MS supports using thread rods (as directed). Angle, flat, and anchorbolts, food gradeneoprene gaskets, foodgrade adhesiveincludedinthe scope. 24G |
| 262 | Ducting Supply andfixingof site fabricated GI sheetmetalductsinaccordance with the approved shop drawings and as required as per specifications. GI sheet will be as per IS-277. All necessary GI /MS supports using thread rods (as directed). Angle, flat, and anchorbolts, food gradeneoprene gaskets, foodgrade adhesiveincludedinthe scope. 22G |
| 263 | Ducting Supply andfixingof site fabricated GI sheetmetalductsinaccordance with the approved shop drawings and as required as per specifications. GI sheet will be as per IS-277. All necessary GI /MS supports using thread rods (as directed). Angle, flat, and anchorbolts, food gradeneoprene gaskets, foodgrade adhesiveincludedinthe scope. 20G |
| 264 | Thermal insulation Supplying and fixing of followingthicknessofmatfinishclosedcellnitrile rubber(class “1”)insulationonexistingductafter applying two coats of cold setting adhesive complete as per specifications and as required. 25 mm thick |
| 265 | Thermal insulation Supplying and fixing of followingthicknessofmatfinishclosedcellnitrile rubber(class “1”)insulationonexistingductafter applying two coats of cold setting adhesive complete as per specifications and as required. 19 mm thick |
| 266 | Internal duct acoustic insulation Supply, installation,testingandcommissioningofinternal ductacousticinsulationwith opencellstructured class"O"fireretardantnitrilerubberwithdensity 140-180kg/m³ andspecsasperRISACchart specificationsheetinsideoftheAHUsupplyair ducting up to 4 mtr. length from AHU mouth as per the specifications, it should have antimicrobial properties. 10 mm thick |
| 267 | Grills and diffusers Supplying & fixing of powder coated extruded aluminum airgrillswithout volume controldamper complete as required. |
| 268 | Grills and diffusers Supplying&fixingofcollerdampercompleteas required. |
| 269 | Grills and diffusers Supplying & fixing of powder coated extruded aluminumsquarediffuserwithout volumecontrol damper complete as required. |
| 270 | Grills and diffusers Supplying & fixing of powder coated extruded aluminum square diffuser with volume control damper complete as required. |
| 271 | Grills and diffusers Supplying&fixingof G.Iductvolumecontrol damper |
| 272 | Flexible connections Providing & fixing of flexible canvasconnectionbetweenindoorunitandductto avoid the vibration transfer |
| 273 | Control cable Supply and laying, testing & commissioningoffollowingsizesofcopper conductorcontrolcablesonexistingtrayincluding fixingclamps&properconnectionsto equipment etc. complete as required. 2C x 0.75 sq.mm |
| 274 | Control cable Supply and laying, testing & commissioningoffollowingsizesofcopper conductorcontrolcablesonexistingtrayincluding fixingclamps&properconnectionsto equipment etc. complete as required. 4Cx1.5 sq.mm |
| 275 | Control cable Supply and laying, testing & commissioningoffollowingsizesofcopper conductorcontrolcablesonexistingtrayincluding fixingclamps&properconnectionsto equipment etc. complete as required. 4Cx 2.5 sq.mm |
| 276 | Communication cable Supply and laying, testing & commissioning of following sizes of shielded copper conductorCommunicationcablesonexistingtray includingfixingclamps&proper connectionsto equipment etc. complete as required. 2Cx1.5 sq.mm |
| 277 | Outdoor stand fabrication Supply, fabrication and erectionofangle/channel/flatiron stand,hanging arrangementfor airconditioning machines &ducts etc, back /support clamps orother similar work etc. includingnutboltsofrequiredsize,makingholes, fabrication,welding,cutting,etc.and paintingwith onecoatofredoxidepaint&twocoatofenamel paint as required as per specification. |
| 278 | Audio Visual |
| 279 | Providing and Fixing of Horn loaded three way full range cabinet with a continuous power handling of 600 watt in a compact,BIAMPED design combination ofminimum 3 or More loudspeakerswith a LG(Long thro) cabinet using a dispersion of 40X40 or batter - MT (Medium Thro) 40X60 or batter ,ST (Shortthro)40X90orbatter andcustombuilt 2X12"(300mm)low-frequencydriveranda8"MF using a 50 mm voicecoil and a 1" exit compression driver having a 44 mm voice coil mounted on a constant directivityhorn. At 4 Ohm and a sensitivity of 101/109 dB, it has a continuous/Peak SPL of 131/137 dB. With a frequency response to be 75hz 20 kHz. Constructed from a 15/24 mm Baltic multi-laminateBirch,(MDFCabinetswillnotbeaccepeted)coveredinahighlyweatherresistant paint, protected by a sturdy 16 gauge steel grille. Bidder Should provideGLL Simulation Files along with Technical bid Speakers Should have CE and Rohs QualityStanderd Ceritificate Bidder should Provide OEM Authorization along withtechnical bidApproved Make - CSC Audio / KV2 / Funkstion one |
| 280 | 600 watt in a compact,BIAMPED design combination ofminimum 3 or More loudspeakerswith a LG(Long thro) cabinet using a dispersion of 40X40 or batter - MT (Medium Thro) 40X60 or batter ,ST (Shortthro)40X90orbatter andcustombuilt 2X12"(300mm)low-frequencydriveranda8"MF using a 50 mm voicecoil and a 1" exit compression driver having a 44 mm voice coil mounted on a constant directivityhorn. At 4 Ohm and a sensitivity of 101/109 dB, it has a continuous/Peak SPL of 131/137 dB. With a frequency response to be 75hz 20 kHz. Constructed from a 15/24 mm Baltic multi-laminateBirch,(MDFCabinetswillnotbeaccepeted)coveredinahighlyweatherresistant paint, protected by a sturdy 16 gauge steel grille. Bidder Should provideGLL Simulation Files along with Technical bid Speakers Should have CE and Rohs QualityStanderd Ceritificate Bidder should Provide OEM Authorization along withtechnical bidApproved Make - CSC Audio / KV2 / Funkstion one |
| 281 | Supply, installation, testing & Commissioning of a Type Multi loaded subwoofer Frequency Response (1) 37 Hz-300Hz ± 3 dB Drivers LF: 2 x18" (450 mm) with a 4" (100 mm) voice coil Power 3200 Watts Peak Power 6400 WattsSensitivity (1 Watt/1 metre) 106 dB Maximum SPL (9) 137dB continuous, 143 dB MaxNominal Impedance 4 Ohms Dispersion Omni Crossover LPF 100 Hz Enclosure Baltic birch ply Protective Grille Perforated steelBidder should Provide OEM Authorization along withtechnical bid &ShouldhaveCEaandRohsQualityStanderdCeritificate ApprovedMake-CSCAudio/KV2/ Funkstion one |
| 282 | Supply,installation,testing&CommissioningofReflexloadedinfrasubwooferforlowfrequency extension Frequency Response 26 Hz-120 Hz ± 3 dB DriversLF: 1 x 21" or batter ( 525 mm) with a 4" (100 mm) voice coil Sensitivity (1 Watt/1 meter) 98 dBSPL 130dB continuous, dB 136db max Nominal Impedance 4 Ohms Dispersion Omni CrossoverLPF 60 Hz EnclosureBaltic birch ply Finish Textured black paint Protective Grille Perforated steel Connectors 2 x Neutrik NL8 Rated Maximum Power/ProgramPower2800WattAccessoriesCastors,FeltedwaterproofcoversCEaandRohs QualityStanderdCeritificate Submittionof BiddershouldProvideOEMAuthorizationalongwith technical bid Approved Make - CSC Audio / KV2 / Funkstion one |
| 283 | Providing and Fixing of Active Stage Moniters Shell have Frequency Response165 Hz – 18 kHz1 Frequency Range150 Hz – 20 kHz1 Maximum SPL126 dB Coverage (Hort. x Vert. 90° x 60° PowerRating 1000WattsLFTransducer 12”wooferand1.5”high-frequencytitaniumcompressio driver (2) XLR/TRS Combo Jack, (1) 3.5 mm Input, and (1) XLR link Output OEM Authorization along withtechnical bid mandatoryCSC Audio / KV2 / Funkstion one |
| 284 | Providing and Fixing of Over-Ear Closed-Back Foldable Studio Headphones with Bluetooth Driver size (mm)50 Sensitivity (dB SPL/V @ 1 kHz)114 Rated impedance (O)32 Audio frequency bandwidth (Hz)15 -28000Audiofrequencybandwidth15-28000Hz ubmittionof BiddershouldProvideOEM Authorization along withtechnical bid mandatory Approve Make - Shennisher / AKG / Shure |
| 285 | Providing and Fixing of Ultra compact two way Full range Green Room Speakers Frequency Response (1)80Hz-16kHz±3dBDriversLF:5”(125mm)witha.75"(19mm)voicecoil,HF:3"(75mm) Sensitivity(1Watt/1metre)90dBmSPL(9)110dBcontinuousNominalImpedance8Ohms Dispersion 90° conical Continuous Power AES 100 Watt Crossover HPF 75 Hz full range / 110 Hz with subt ubmittion ofBidder should Provide OEM Authorization along withtechnical bidCSC Audio / KV2 / Funkstion one |
| 286 | Providing and Fixing of 30X Full HD PTZ Camera Lens f4.42mm ~ 88.5mm, F1.8 ~ F2.8 Digital Zoom 8X Digital Zoom FOV 60.7° ~ 3.36° Vertical Angle of View 34.1° ~ 1.89° Camera must have Face Detection OptionInterface USB 2.0, HDMI, 3G-SDI USB USB 2.0 ( For Recording ) HD Out put 1xHDMI: Version 1.3 Minimal Illumination : 0.5 Lux @ (F1.8, AGC ON) Shutter : 1/30s ~ 1/10000s Video S/N : =55dB Vertical Angle of View : 44.8° ~ 3.9° Horizontal Rotation Range : ±170° Vertical Rotation Range : -30° ~ +90°PanSpeedRange:1.7°~100°/sTiltSpeedRange:1.7°~69.9°/sH&VFlip :Support Image Freeze:SupportLocalStorage:SupportNumberofPreset:255PresetAccuracy:0.1°Video Compression:H.265/H.264/MJEPGVideoStream:MainStream,SubStreamMainStream Resolution:1920x1080,1280x720,1024x576SubStreamResolution:720x576,720x480,320x240 Video Bit Rate : 128Kbps ~ 8192Kbps Bit Rate Type : Variable Rate, Fixed Rate Frame Rate : 50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps, 720p120: 120fps, 640x480p240: 240fps Audio Compression : AAC Audio BitRate:96Kbps,128Kbps,256KbpsSupportprotocols:TCP/IP,HTTP,RTSP,RTMP,Onvif,DHCP, Multicast,etcCameraShouldsupplyedwithjousticController.SubmittionofCE,FCC,RoHSand UL/CB &Bidder should Provide OEM Authorization along withtechnical bidApproved Make / People link / Vadio / Axies |
| 287 | Provding and Fixing of Power Amplifyer Shall haveNo of channels4 Power channel2 Ohms 800 4 Ohms 800 8 Ohms 500 Input Sensitivity @4 ohms 1.42v Distortion : 20Hz-20kHz : 2dB 0.001 Slew Rate 30v/uSFrequencyResponse:+0/-1dB20-20kSNR100dBMaxInput:RMS10vInputImpedance: Ohms 10k DampingFactor :8 ohms: 100Hz1000 OutputCircuitry class-DConnector :Input/Link : XLRConnector:OutputSpeakonControls:FrontlevelControls:Rearmono/stereo&standby Indicatorssignal,limit,standbyProtectionovercurrent,overtemperature, mismatchedloads, overvoltage Cooling : 2X Fans temperature controlled variable speed fans Mains Operating Range 170 260VACMainsCablefixed1meterinlengthBiddershouldProvideOEMAuthorizationalongwith technical bid Approved Make CSC Audio /Power soft / Crown |
| 288 | SpacificationPower/ channel2 Ohms 1600 4 Ohms 1600 8 Ohms 1000 Input Sensitivity @4 ohms 1.42vDistortion:20Hz-20kHz:2dB0.001SlewRate30v/uSFrequencyResponse:+0/-1dB20-20k SNR 100dB Max Input : RMS 10v Input Impedance : Ohms 10k Damping Factor : 8 ohms : 100Hz 1000 Output Circuitry class-D Connector : Input/Link :XLR Connector : Output Speakon Controls : Front level Controls : Rear mono/stereo & standby Indicators signal, limit, standby Protection over current, over temperature, mismatched loads, overvoltage Cooling : 2X Fans temperature controlled variable speedfansBiddershouldProvideOEMAuthorizationalongwith technicalbidMainsCSCAudio/Power soft / Crown |
| 289 | ProvidingandFixingofDigitalSignalProsessorShallhave2inputsx6outputsaudioprocessorAll inputsandoutputsarebalancedControlandmutebuttons onthe frontpanelPolarity ineach input and output4 parametric EQ filters per input8 parametric EQ filters per outputLinkwitz-Riley, Butterworth, Bessel filters on outputs with 48 dB / oct slopesDelay up to 1000 ms on each input and outputCompressor/limiteronalloutputs,includingmake-upgain.3linkgroups(outputchannels link)24 bits / 48 kHz DSP processingLovely blue front panel LCD display with 2x20 characters4 front panel configuration keys and a digital encoderUSB interfaceSystem templates to create user configurations20 user presetsPassword protection system with 2 security modes levelBidder should Provide OEM Authorization along withtechnical bid Approved Make - Sysmatrix / Bi Amp / BSS audio / Eclair Audio |
| 290 | Providing and Fixing of 8 Ch Wireless SystemShall have Up to 24-bit, 48 KHz, digital audio RFDaisy- chainable up to 32 channels per RF band Working Range: Minimum 300 feet Encryption: 256 bit key (AES) always-on NSA FIPS 197 standard Frequency Response on 16 Ch & 32 Ch s 20 Hz - 20 KHzS/N Ratio:109dB(typical‘A’weighted)TotalHarmonicDistortion:<0.03%@1kHzStability:<5ppm Antenna Distribution: Attach up to 32 channels to one pair of antennasOutput Impedance: 100 Ohm Interface: USB, RS232 & Ethernet (dual port 10/100 Mbps) Dante™ Audiochannels: Eight (8) digital outputs@48KHz DantePorts:Primary&secondary,RJ45ports,100/1000Mbps,328ft.GPIO Interface:22programmablepinsGainAdjustmentRange:-20dBto+31dBBiddershouldProvide OEM Authorization along withtechnical bidApproved Make Clear one / Shennisher / DPA |
| 291 | Providing and Fixing of Charging Station (Docking Station) Housing: ABS Capacity: Charges 8 microphones simultaneously(mix and match any type of the supplied microphones) Power: 5.6V DC / 4AalongwithExtensionAntennasMount:Wallmount,ceilingormic-standmountConnectors: Straight connectors Reception Pattern: 130-degree reception pattern Gain: Provides 15dB of RF gain (915MHz) Power: Phantom-powered from the receiver Bidder should Provide OEM Authorization |
| 292 | Providing and Fixing of Foot Microphone Shall haveMic Polar Pattern : Cardioid, omniRF Output: 1, 10, 25 or 50mW, user selectable Power: USB or AA rechargeable (included) or AA disposal Antenna: InternalLED Indicators: Battery status, mute status Frequency Response: 60 - 20kHz (Omni version); 60 - 15kHzSignal-to-Noise Ratio: 80dB Typ. at 1kHz (1Pa) ‘A’ weighted(Omni version); 74dB Typ. at 1kHz (1Pa) ‘A’ weighted (Cardioid version)(Cardioid version) Talk Time: Up to 8 hrs continuous usage percharge, typical@1mWBiddershouldProvideOEMAuthorizationalongwith technicalbid Approved Make Clear one / Shennisher / DPA |
| 293 | Providing and Fixing of Wirless Goosneck Microphone shall have 18-inch neck with double bendMic PolarPattern:CardioidRFOutput:1,10,25or50mW,user-selectable FrequencyResponse:60- 15kHz Signal-to-Noise Ratio: 74dB Typ. at 1kHz (1Pa) ‘A’ weighted Antenna: Interna Power: USB or AA rechargeable Programmable Switch: Talk, mute, logic mute, on / offBattery Talk Time: Up to 16 hrs continuous usage per charge, typical @ 1mW Approved Make Bidder should Provide OEM Authorization along withtechnical bid Clear one / Shennisher / DPA |
| 294 | Providing and Fixing of Wireless Handheld Microphone Mic Polar Pattern Hyper-Cardi RF Output: 1, 10, 25 or 50mW, user-selectableFrequency Response: 60 - 15kHzSignal-to-Noise Ratio: : 74dB Typ. at 1kHz (1Pa) ‘A’ weighte Antenna: Interna Power: USB or AA rechargeableIndicators: Battery status, mute status Programmable Switch: Talk,mute,logic mute,on /offBatteryTalk Time:Up to8 hrs continuous usage per charge, typical @ 1mW Approved Make Bidder should Provide OEM Authorization along withtechnical bid Clear one / Shennisher / DPA |
| 295 | ProvidingandFixingofwirelessBeltpackTransmitterwithLavalierMicRFOutput:1,10,25or 50mW, user-selectable Antenna: External, field-replaceableDisplay: OLEDPower: USB, AA rechargableIndicators: Battery status, mute statusProgrammable Switch: Talk, mute, logic mute, on / offMic Input Impedance: 47 K OhmsMic Bias: 3V Mic Connector: TA4 Battery Talk Time: Up to 8 hrs continuous usage per charge, typical @ 1 mW Microphone Shall have Mic Polar Pattern: Omni FrequencyResponse:20-20kHzSignal-to-NoiseRatio:Above56dBat1kHz(1Pa)‘A’weighted ApprovedMakeBiddershouldProvideOEMAuthorizationalongwith technicalbidClearone/ |
| 296 | ProvidingandFixingofwirelessBeltpackTransmitterwithHeadsetMicRFOutput:1,10,25or 50mW, user-selectable Antenna: External, field-replaceableDisplay: OLEDPower: USB, AA rechargableIndicators: Battery status, mute statusProgrammable Switch: Talk, mute, logic mute, on / offMic Input Impedance: 47 K OhmsMic Bias: 3V Mic Connector: TA4 Battery Talk Time: Up to 8 hrs continuous usage per charge, typical @ 1 mW Microphone Shall have Mic Polar Pattern: Omni FrequencyResponse:50-18kHzSignal-to-NoiseRatio:Above56dBat1kHz(1Pa)‘A’weighted Headset:Single-earheadsetApprovedMakeBiddershouldProvideOEMAuthorizationalongwith technical bid Clear one / Shennisher / DPA |
| 297 | ProvidingandFixingofInProfessionalEarMoniteringsystemshallhaven-earDrivers:3Frequency Range:18Hz-19kHz Impedance:36 ohms Noise Attenuation:37dB Sensitivity:119dB SPL @ 1mW Cable Length:64? Replaceable Cable Plug Type:1/8?, 1/4? (adapter) Features:Volume control RF Output: 1, 10, 25 or 50mW, user-selectable Antenna: External, field-replaceableDisplay: OLEDPower: USB, AA rechargableIndicators: Battery status, mute statusProgrammable Switch: Talk, mute, logic mute, on / offMic Input Impedance: 47 K OhmsMic Bias: 3V Mic Connector: TA4 Battery Talk Time: Up to 8 hrscontinuoususagepercharge,typical@1mWApprovedMakeBiddershouldProvideOEM Authorization along withtechnical bid Shure / Shennisher /Samson |
| 298 | ProvidingandFixingofSupercardioiddynamicmicforinstrumentapplications icrophoneType: DynamicPolarPattern:SupercardioidFrequencyResponse:40Hz-18kHzOutputImpedance: 350 ohms Connector: XLR Switchable presence filters (3 levels) Sensitivity - 2.2 mV / Pa Approved Make - Sennisher / Shure / Clock Audio / Audix |
| 299 | ProvidingandFixingofdynamicsupercardioidhandheldmicrophoneSupercardioidpickuppattern insulates from other onstage signals Hum-compensating coil reduces electrical interference FrequencyResponse: 40Hz-18kHzOutputImpedance: 350ohmsConnector:XLRBiddershould Provide OEM Authorization along withtechnical bid Approved Make - Sennisher / Shure / Clock Audio / Audix |
| 300 | ProvidingandFixingofHigh-impedance1/4-inchTSconnectorstomaintainthehighestsignal2 channelsformorepossibilitiesSwitchableinputattenuatorforsignallevelsfrominstrumentsto loudspeakersHigh-qualityMidastransformersforvibrantsoundquality -15dBinputpad;easily accommodates signal levels up to 30 dBu ground looping problems with the earth lift switch Bidder shouldProvideOEMAuthorizationalongwith technicalbidApprovedMake-KlarkTechnics/ Behringer / Mars Audio |
| 301 | ProvidingandFixingof AudioMixer Shallhave 24-ChannelPremium MixingConsole16Mic Inputs with 48V Phantom Power and HPF per Channel 24 Line Inputs (16 mono and 4 stereo) 6 AUX Sends + 2 FX Sends 4 GROUP Buses + STBus 2 Matrix out1 Mono out Mixing channels: 24 Line Inputs (16 monoand4stereo)GROUP:4GROUPBuses+STBusAUX:6AUXSends+2FXSendsMATRIX:1 Matrix out On-board processors: FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) Mic inputs: MIC: 16 (INPUTS HPF: 100Hz 12dB/oct) Phantom power: 48Vphantom power per channel Line inputs: LINE: 16 mono+ 4stereo,CHINSERT: 16RETURN: 1 stereo Digital I/O: USB Device, iPod / iPhone Total harmonic distortion: 0.02% (20Hz-20kHz@ +14dBu) 128 dBu Equivalent Input Noise -94 dBu Residual Output Noise Frequency response: +0.5/-1.0dB 20Hz -20kHz,refertothenominaloutputlevel@1kHzApprovedMakeBiddershouldProvideOEM Authorization along withtechnical bid- Yamaha / Presonus / Midas |
| 302 | Providing and Fixing of Video Switcher Shall have Input HDMI 4K 4×HDMI-A Output HDMI 2K 1×HDMI- A Streaming1×USBTypeA Recording1×USBTypeAAudioIn2×3.5mmStereoJack Out1×3.5mm StereoJackCommunicationLAN1×RJ45Power1×USB-CSupported StandardsHDMI2.0 USB3.0 H.265 ITU-T H.265/ ISO/IEC 23008-2 4K HDMI Inputs mix audio from multiple inputs Record to USB AssignablePreviewMulti-ViewChromaKeyEmbedded&InsertAudiowithSyncUSBStreaming OutputOnboardvideopreviewConfigurablePIPvideooverlayControlremotelyfromOEMor3rd partySoftware Bidder should Provide OEM Authorization along withtechnical bid Approved Make - Mars Audio / RGB link /Extron |
| 303 | ProvidingandFixingofCAT6AF/UTP 10GNetworkCablemusthave 0.57mm(23AWG),bare copper wire insulated with FEP (Plenum) or PE (polyethylene). Installation: 0°C to +50°C Operation: - 20°C to +60°C Conductor diameter - in. (mm): 0.023 (0.58) Min. bend radius - in. (mm): 1.12 (28.45) Electrical/OpticalCharacteristicsMutualCapacitance:5.6nF/100mmaxDCresistancemaximum: 9.38Ohms/100m maximum Skew: 45 ns/100mmaximum Pair to ground Unbalance: 330 pF/100m max Nominal Velocity of Propagation (NVP):See cable jacket for NVP setting Coupling Attenuation: 75dB @ 30 MHz Cable should be s fully compliant with channel requirments specified by the TIA/EIA 568-C.2,Cat6AandISO/IEC118012ndEd.Am.1,ClassEAfor10GBASE-TapplicationsApproved Make - Molex / Belden / Element Cables |
| 304 | Providing and Fixing of High flexible speaker cable for power amplifiers up to 2750 watts, Must Have Jacket PVC, ø 9.4 mm, black Insulation PVC, ø 3.9 mm, black and red Conductor Stranded bare copper wires, 7x (32 x 0.15 mm) (3.96 mm²) Center conductor resistance Capacitance cond/cond Insulation resistance Power rating Current max. < 4.65 Ohm /km < 180 nF /km > 200 MOhm /km 2750 Watt 24.0 AmpereTestvoltagecond/condTemperaturerange(flex)Temperaturerange(fix)Bendingradius min.2000 V eff.- 5° to +50° C-30° to +70° C 5x overall diamBidder Shall Submitted oem Aurtozation along with technical bid Approved Make - Gothem / Sommar / belden |
| 305 | providing and Fixing ofhigh Quality SignalCable Jacket PVC, ø 8.80 mm, marine blueShield No. 1 Barecopperwires(0.10mm),100%coverageShieldNo.2Barecopperwires(0.10mm),100% coverageLayerPolyesternonwoventhermallybonded,bothsidesalum.coatedSeparationFiller materialviscoseConductorshieldlayerPolyesternonwoventhermallybonded,bothsidesalum. coated Cond. copper shield Bare copper wires (0.10 mm), 100% coverage Isolation Cellular PE, ø 2.00 mm, 4 different colors Conductor Stranded bare LCOF copper wires, 64 x 0.10 mm (4x) (0.50 mm²) Bidder Shall Submitted oem Aurtozation along with technical bidApproved Make - Gothem / Sommar |
| 306 | ProvidingandFixingof50M4K60Hz:FiberOpticHDMI2.0bCableHighSpeedHDMItoHDMI 18Gbps Subsampling 4:4:4/4:2:2/4:2:0, HDTV,HDCP2.2,3D 2160P 1080P Ethernet, ARC, HDR,Ultra HD, UHD 4k HDMI Cor High Speed 18Gbps Supports HDR/CEC/EDID /HDCP2.2, 1536KHz Sample Rates, 4K@60Hz,32UncompressedAudioandVideoSync,ARC,Chroma BidderShallSubmittedoem Aurtozation along with technical bidApproved Make - QED / Perfect Path / AOC |
| 307 | Providing and Fixing of USB 3.0 Fiber extension distance 250 MetersSupport USB3.0 SuperSpeed up to 5Gbps,USB3.0TypeAReceptacleDuplexLCfiberconnector,purehardwaredesign,nodriver needed, compatible with all operation systems, support plug and play |
| 308 | ProvideandFixingofCertifiedtoIEC/EN61643-1BranchCircuitsurgeprotectionandpower conditioningForaudio/Video/StageLightingspanel.isbuiltwithaprofessional-gradeNEMA magneticshieldingsteelenclosureeliminatesurgeenergyupto6,000voltswithoutproducing harmfulsideeffectssuchasearthcontaminationorcommon-modedisturbances.Nominallineto neutralvoltageU0(V)240VMax.Cont.OperatingVoltageUc(V) 240V260VACVoltageprotective level Up (V) 1KVMax. shorted current. (Isc) 3KA Open circuit voltage (Uoc) 6KVTOV characteristic (UT) TOVwithstand , tT = 5s, UT=335V; Applicable Power Supply System TN TTIT Number of ports Two Voltage regulation = 1% Operation temperature and humidity -40 - +35°C, 30-90% Bidder Shall Submitted oem Aurtozation along with technical bid Approved Make Surge X / Furman / Delta |
| 309 | ProvidingandFixingof42EquipmentRackwithClusterWheelsIncludingallHardwareApproved Make - Netrack / Tata / Vall rack |
| 310 | Providing and Fixing of Mounting Hardware for Main Speakers |
| 311 | Providing and Fixing of Mounting Hardware for Subwoofer System |
| 312 | Providing and Fixing of Mounting Hardware for Surround Sound System |
| 313 | Providing and Fixing of Boom Stand Small |
| 314 | Providing and Fixing of Boom Stand Big |
| 315 | Providing and Fixing of System Interconnect For audio System |
| 316 | Stage Lighting |
| 317 | Providing and Fixing of SITC of 100W High Quality LED wash Light complete with,Lamp source 3200K CCTColour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputedmake (LM80 to be provided)DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 45° Total Power Consumption of 115WHigh quality output r ParFlicker Free 100% for Tv & Film Cameras11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec VariableFixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmXBlack powder coated body.RDM Control options with latest technology (RDM ID to bespecified) Certification having BIS compliant to IS 10322 (Part 5/ Sec1):2012CE Certification complianttoEN60598-1:2015,EN61437-2-13:2014 Approvedmake MartinLightings/Leksa/ ETC/FD Lightings |
| 318 | SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/Osram/ Creeor reputedmake (LM80tobeprovided)CRI& TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec4 Kinds of dimming curves, Black finish housing ManualFocuswith4Beamshapingcutters Efficientandwell-designedLampreflector Efficient CoppertubebasedHeatSinkforHeatDissipation SleekandUniqueDesignedLightweightbody Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminatethe keypresentor ortalent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012CE Certification compliant to EN60598-1:2015, EN61437-2 13:2014 Approved makeMartin Lightings / Leksa /ETC /FD Lightings |
| 319 | SITCof200WLEDBlinderLight30Degreecompletewith 3200KCCT2x100WChipOnBoardLED LampsourceCOBLEDsourcefromCitizen/Philips/Osram/Creeorreputedmake(LM80tobe provided)DmX512dimmingwith4/8ChannelmodesCRI&TLCIValue>90 Strobeoption Adjustable1~25times/SecVariableBeamAngle30DegreeTotalPowerConsumptionof220W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% forTv&FilmCamerasBlackfinishhousing,IP20protection HavingStrobeoptionandsmooth dimmingilluminateStagewithuniformlightintensitylevels. RDMControloptionswithlatest technology(RDMIDtobespecified)CertificationhavingBIScomplianttoIS10322(Part5/Sec 1):2012CE Certification compliant to EN60598-1:2015, EN61437-2- 13:2014 Approved make Martin Lightings / Leksa / ETC /FD Lightings |
| 320 | SITC of 100W LED Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel Lens CRI,TLCIandR9valueabove96LEDCOBBasedSourceNoMultipleShadows–SingleSource illumination Total Power Consumption of 110W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V,50/60HZWorking Temperature - +40° ~ -30° Active Cooling with Low Noise Fan DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual AdjustmentManual and DMX control Option mode through 5pin xlr Black powder coated fabricated housingwithnormalyoke.RDMControloptionswithlatesttechnology(RDMIDtobespecified) CertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012 CECertificationcompliantto EN60598-1:2015, EN61437-2- 13:2014Approved makeMartin Lightings / Leksa / ETC/FD Lightings |
| 321 | SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided)RGBW 3W Lamp source x 54 PcsDmX 512 dimming with 8 ChannelHigh Bright Red, Green, Blue, White LED’s SourceUnlimited Color Mixing throgh DmX 0 ~ 100% Linear dimmingIn built presets for different colors Strobe Mode 20 times/Sec Data DmX through3/5PinXLR’s65dB~130dBSoundsensingcapacityPowerInandOutConnectionsHigh precision colors, IP20 protectionPowder coated Black finish housing Having Sound Control & Master Slave Auto Run ModeIlluminate the Indoor stage with unlimited colour effects Rigidly built pressure die-castedAluminiumbody.RDMControloptionswithlatesttechnology(RDMIDtobespecified) CertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012 CECertificationcompliantto EN60598-1:2015, EN61437-2- 13:2014 Approved makeMartin Lightings / Leksa / ETC /FD Lightings |
| 322 | SITCof180WLEDCCTtuneableLightcompletewithCCTTuneableLampsource LEDsourcefrom Lumiled / Seoul / Nichia or reputed make (LM80 tobe provided) Having CRITLCI Valuesabove 95 High precision steady colorNo heat, DmX 512 dimming with 2 ChannelBeam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coated Black finish housingRigidly built pressure die-casted Aluminium bodyLED Easy view display Flicker Free for high FPS Smooth fade in and Fade out Data DmXthrough5PinXLR’sTotalPowerConsumptionof180W SoundActiveModeControlIP20 protection.65dB ~ 130dB Sound sensing capacity Power In and Out ConnectionsRDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec1):2012 CECertificationcomplianttoEN60598-1:2015,EN61437-2-13:2014Approvedmake Martin Lightings / Leksa / ETC /FD Lightings |
| 323 | SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs LED source from Lumiled / Seoul / Nichia or reputed make (LM80 tobe provided)Having CRI TLCI Values above 95Flicker Free for high FPSSmooth fade in and Fade out High precision steady color No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium bodyLED Easy view displayData DmX through 3 / 5 Pin XLR’s 65dB ~ 130dBSoundsensingcapacityPowerInandOutConnections TotalPowerConsumptionof180W Sound Active Mode Control IP20 protection. RDM Control options with latest technology (RDM ID to bespecified)CertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012 CECertification compliant to EN60598-1:2015, EN61437-2- 13:2014Approved makeMartin Lightings / Leksa / ETC /FD Lightings |
| 324 | ProvidingandFixingof15RMovingheadLightsholdhaveHighBrightDaylight8500K±300 Pan Range - 540° & Tilt Range - 270°High Precision Movement14 kinds of color + blank 14 Fixed Metal Gobo Patterns Body Colors Available in BlackSoft Effect Adjustment8 Rotating Prisms Power supply: AC100V - 240V±10%Frequency: 50- 60 HzLight source: 330W 15RDMX Channels: 16CHSStrobe: 0 9 times/secProtection rate: IP20Ballast Electronic ballast Approved makeMartin Lightings / Leksa / ETC /FD Lightings |
| 325 | ProvidingandFixingof:4Wfatbeamredlaserbar shouldhaveLED:7°(Ambercolor) Scanning Angle : 180° Lamp Source Laser : 8 pic’s 500mW fat laser diodeLED : 7 pic’s of 3W amber LED’s Wave Length:638nm(RedLaser)Lasersafetystandard:Class350,000HoursLEDBurninglifeControl: DmX 512 Through 3/5 Pin XLR7/16 Channel DmX Control Auto Mode Operation Sound Active Mode ControlMaster Slave Mode Approved make Martin Lightings / Leksa / ETC /FD Lightings |
| 326 | Providing and Fixing of Fog MachineRated power 1500W Warm-up time 10 minutes (approx.)Fluid consumption 110 ml/min Fluid tank capacity 6 LitersAmbient temp. range 0°C – 40°C (32°F – 104°F) Control Manual, DMX 512, Timer Wireless (Optional) DMX channels 1 channel Connection XLR 3-pin and5-pin(DMX)WithProWirelessRemoteApprovedmakeMartinLightings/Leksa/ETC/FD Lightings |
| 327 | SITC of Light fixture moutingclampCustomizedfor suspendingon fixedbars onstage Madeup of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coatingmattblackfinish.Safeworkingload150KGSuitabletoBattenofsize30ODto60/FD Lightings OD Approved make Martin Lightings / Leksa / ETC |
| 328 | SITC of Light Fixture dual safetyChain made up of GI wire ropeBundled and twisted togetherHaving loadbearingcapacityabove200KgsSleveontherope.CarabinerClipApprovedmakeMartin Lightings / Leksa / ETC /FD Lightings |
| 329 | SITC of Suspender cum clamps designed made out ofMS material150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process withvariouschemicaltreatmenttokeepthemrustfreeSuitabletoholdvarioustypegrid&other rigging systems. Approved makeMartin Lightings / Leksa / ETC /FD Lightings |
| 330 | SITCofCProfileMSHotrolledstrips3mmthickwithExtraUbendusedeithertocreatebasic supportsCustomized 40 x 50mmm,All the materials under gone through 7 tank process with various chemicaltreatmenttokeepthemrustfreeMakeseasiertosuspendallthestagemachineryDuly powder coatedMatt black texture finish paintApproved makeStanderd |
| 331 | SITC of Fixed on stage Lighting bar/winch of 10Mtr length constructed with an dual contruction light bar with an MildSteel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixedontherccroofwith4anchorfastnersof10mmwhichcantakeantotalload of400KG each fastner. Made out of 48mm Outer Dai,40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe.Dual Barrel ArrangementPowder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall bethereLightbarLengthshallbeofcustomizedtypeaspersitecondition.Upperpipeofdual constructionisusedtoanchorthebar lowerpipeiseffectivelyusedtohangthelightfixtures Approved make Martin Lightings / Leksa / ETC /FD Lightings |
| 332 | SITC of Fixed stage side Ladder as per the design, Size of 600mm x 2400mm,Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrelDual Barrel Arrangement Dual Construction Powder coatedwithMattblackTextureSingleConstructionwithCrossconnectingpipesCrossconnecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site condition Approved make - Standerd / Custom as per site |
| 333 | SITC of Motorised integrated FOH bar/winch of 11Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG:B5,AMP:2.7Y,Volt:415v,DEBRG:62052Z,DUTY:S1,FREQ:50Hz,NDEBRG:62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6groveswheretheGIwireropeof5mmcanbewindedupwhenthehoistmovesupanddown. 415VACMotorwithBrakeforMotorSystemtoliftaloadof180Kgasasafeworkingloadwhich should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barreldulypowdercoated Madeusing40NBdualconstruction.Mattblacktexturefinishpaintto keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys,GI wire rope with winding drum.Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safeworkingloadof 200Kg.Cable managementsystem ApprovedmakeMartinLightings /Leksa / ETC /FD Lightings |
| 334 | SITCofFlatCableWireharnessrequiredtoprovidetheinputpowertothesocketsonthehoists connecting between grid level circuit box to on hoist circuit box with below specifications:FRLS Multi coreCoppercable 18CoresofPowereachwith2.5Sq.mmcopperwiresinsulatedwithhigh insulated material 2 DmX 5 core cables with low noiseWidth of the flat cable 120mm approx.Clips at each bending of the cable to act as retractor unitLong life, no breakage, smooth folding Approved make |
| 335 | SITCofPowerDistributionElectricalpanelhavingaIndividualMCBcontrolfor20outgoingcircuits MadeupofMSSheetmetalfabricatedhousing Blackpowdercoated Iveryconnectorsforthe internalterminationsandexternaloutgoingconnectingpoints,Fibre/ brassglands ofsuitable size fitted MCB control for outgoing circuits. Custom built as perspecification andproject requirement. Approved make Seimens / Leksa Lighting / L&T |
| 336 | SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing.Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted withPowercon orIECconnectorBox10A. Clamparrangementfor fixingor Raulplug arrangementfor wall/ floor fixing Approved make Approved make Seimens / Leksa Lighting / L&T/ Fidelity |
| 337 | SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating TempMoldings: Nylon, Flammability Rating UL94V-0Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing Approved make Approved make Seimens / Leksa Lighting / L&T/ Fidelity |
| 338 | SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing HightemperatureresistantinsulatormaterialAllmetalhousingoffersbestoverallRFprotection &electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLRMalesocketClamparrangementforfixingorRaulplugarrangementforwall/floorfixing Approved make Approved make Seimens / Leksa Lighting / L&T/ Fidelity |
| 339 | SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing HightemperatureresistantinsulatormaterialAllmetalhousingoffersbestoverallRFprotection &electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLRFemalesocketClamparrangementforfixingorRaulplugarrangementforwall/floorfixing Approved make Approved make Seimens / Leksa Lighting / L&T/ Fidelity |
| 340 | SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on toasheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection &electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing Approved make Approved make Seimens / Leksa Lighting / L&T/ Fidelity |
| 341 | SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares Approved make - Custom |
| 342 | SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid. Approved make Custom as per site Requirment |
| 343 | SITCofDmXMaleFemaleConnectors5PinhavingrubbersheethprotectionforCrossconnecting DmX wiring connections Approved make Samson / Neutrik / Gothem / MX / Leksa |
| 344 | SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframin Approved make Approved make Samson / Neutrik / Gothem / MX / Leksa |
| 345 | SITC of Digital Lighting Console with 1024 DMX channels, 1024 Channels. 10 Programmable Executors Master Fader, Keypad entry, LCD Display, Encoder Wheels Time control of scenes: Fade in/out, LTP slope Channels for each fixture 40 primary + 40 fine tune Switchable Page Scenes/Playbacks 10 Scenes torunsimultaneoulsy 600ScenestepShapegenerators:ShapesofDimmer,Pan/Tilt,RGB,CMY, Color, Gobo, Iris and Focus, Master slider -Global, playback, fixture USB Memory - FAT32 supported Approved make Lite Puter/ Leksa Lighting/ Avolite |
| 346 | SITC of Opto isolated RDM enabled DmX splitter unit providedwith, 8 Isolated outputsSlow blow safetyfuse 5PinXLRforoutputinterfaceDualmodetoselect2universeoperationDmXInput through 5 Pin XLR Connector Control Protocol RDM and DMX 512 Powder coated compartment finish Mounting brackets for grid mountApproved make Markrich MRK / Martin Lightings /ETC / Leksa /Aultra / Canara /Fidelity |
| 347 | SITC of Auxilary Marshalling Box, made up of MS Sheet metal fabricated housing black powder coated andiveryconnectorsfortheinternalterminationsandexternaloutgoingconnectingpoints,fibre glands of suitable size Approved make Approved Make - Custom |
| 348 | SITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 1Wayprovidingpowerinputformotorsinternallyneatlywiredwithcontactorshavingindividual motorcontrolwithrequiredPushbutton,Emergencytrip,RYBindicators,SupplyIndictorand necessary meters operated wireless smart working functianailty for the motorised lightbars should be there with one neutral & phase connection slots and with 2 vertual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features Approved make Markrich MRK / Martin Lightings /ETC / Leksa /Aultra |
| 349 | SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid levelpointmadeoutofMSSheetmetalfabricatedhousingdulypowdercoatedwithmattblack texture finish paint, fitted with required channels and ivery connectors, necessary glands etc.Approved make Leksa Lighting / Seimens / Aultra Lighting |
| 350 | SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size Approved make Polycab / Walna / SBEE |
| 351 | SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. Approved make Polycab / Walna / SBEE |
| 352 | SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size.Approved make Polycab / Walna / SBEE |
| 353 | SITCof5CoreDmXCablewithSheathedhousingonthecable,welldesignedinsulationlownoise suitable to transmet DmX signal. Approved make Gothem / belden / Crystal |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
