High Court-HC has published Tender For Purchase Rate Contract For Customized Modular And Standard Furniture And Partitions. Submission Date for this Tender is 19-02-2024. Connectors Supply Tenders in Jabalpur Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1. Section A - REVOLVING CHAIRS |
| 2 | Revolving High Back Chair for Hon" High Court Judges - High Back Chair for High Court Judges. WIDTH (W) - 69.0cm DEPTH (D) - 77.8cm HEIGHT (H) - 123.5-133.5cm SEAT HEIGHT (SH) - 49.5-59.5 cm. SEAT ASSEMBLY:The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring coms, super soft foam of 32 kg/m3 density and edging foam of 28 kg/m3 dormity. A 200GSM soft touch fiber fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. BACK ASSEMBLY: The back assembly is made up of a combination of pinewood members, 12mm thick MR Grade plywood and 2mm thick cardboard, layered with slab stock foam of 28 kg/m3 density. A 200GSM soft touch fiber fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. ARM PAD ASSEMBLY: The arm pad assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated brackets, Inbuilt with foam of 60 kg/m3 density, A 200GSM soft touch fiber fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. CENTER TILT WITH MULTI POSITION LOCK MECHANISM: The mechanism is designed with the following features: • 360 revolving type. • 3 Position locking till tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The Class 4 pneumatic height adjustment has stroke of 100.3cm. PEDESTAL ASSEMBLY: The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color-coated internal surface, it is fitted with 5 castors and has a pitch-center diameter of 67.510.5 cm (77.5 10 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black polyamide. WIDTH (W) - 69.0cm DEPTH (D) - 77.8cm HEIGHT (H) - 123.5-133.5cm SEAT HEIGHT (SH) - 49.5-59.5 cm. |
| 3 | Revolving chair for Registry Officer High Court / District Court Judges – Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY:The Cushioned seat assembly consists of seat outer (material-30% Glass Fiber Nylon) & upholstered Seat inner (material - Poly Propylene) with moulded Polyurethane foam & polyester fabric. The Net Back should be made up of back outer (material-Glass Fiber Filled Nylon) & Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H)Seat Size : 51.0 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgffor 25% compression. BACK SPINE: The support spine should be made up of High Pressure Die cast polished head Aluminum. ARMRESTS: The armrest should be having two adjustments, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner. ACTIVE BIO-SYNCHRO Mechanism: The adjustable tilting mechanism should be designed with the following features: • 360° revolving type • Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort • Tilt tension adjustment can be operated in seating position • 5 position Tilt limiter giving option of variable tilt angle to the chair • Seat / back tilting ratio of 1:2 • The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron). SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cm. LUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material-Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm. PEDESTAL ASSEMBLY WITH CASTORS: The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. Pitch-center dia.(75.0 ± 1.0cm. with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. The neck rest assembly consists of upholstered Neck rest inner (material-Poly Propylene) with moulded Polyurethane foam and Polyester fabric. Upholstered inner should be fixed to Neck rest cover. Neck rest should be fixed to back assembly through Neck rest spine. Neck rest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2° Overall Dimensions of Chair Seat Height - min 45.5 to max 55.5cm. Height - min 95.5 to max 105.5 cm. Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm. |
| 4 | Revolving Chair for District Court Judges / Registry Officer High Court - Executive High back Chair & Chair should be tested on BIFMA standards with Seat Slide for All Division Incharge with High BACK SIZE: 51.6 cm. (W) x 75.2 cm. (H)- SEAT/BACK ASSEMBLY: to be made up of 1.2 ± 0.1cm thk. hot pressed plywood upholstered with knitted fabric, over moulded High Resilience Polyurethane foam. SEAT SIZE: should be 49.0 cm. (W) x 51.4 cm. (D).The HR polyurethane foam should moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. The adjustable armrest shall have following features: Up-Down adjustment 8 steps (8.0±0.5 cm range) · Height adjustable armrest structure which is powder coated & fitted with an armrest top. Fixed Armrest Top is PU molded over metal insert. FRONT PIVOT SYNCHRO MECHANISM: with following features: · 360° revolving type. · Single point control. · Front-pivot for tilt with feet resting on ground ensuring more comfort. · Tilt tension adjustment. · 4-position locking with anti-shock feature. · Seat/back tilting ratio of 1:2 Chair Back can be adjusted in 5 positions manually · Stroke of height adjustable spines hall be 7 cm. PEDESTAL ASSEMBLY WITH CASTORS: which shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is Ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors).Seat can be slide horizontally as per user convenience. Stroke of seat slide shall be 4 cm- 5 cm. |
| 5 | Revolving Chair for Sr. Division Judge / Civil Judges- Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE): The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU arm top 5.ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features 360° revolving typeFront-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort Till tension adjustment can be operated in seating position 5 position Tilt limiter giving option of variable sit angle to the chair Seat/back tilting ratio of 1:2 The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron) HEADREST: The Headrest sub-assembly is made up of injection moulded glass filed Polypropylene which is upholstered with moulded HR polyurethane loam and fabric has an adjustment of 3.00.1cm & it is assembled over GRETA 20F. The complete headrest assembly is retrofit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm. 8. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W) - 76.0cm DEPTH (D) - 76.0cm HEIGHT (H) - 114.0 cm- 123.5cm SEAT HEIGHT - 43.5 - 54.0cm. |
| 6 | Revolving Chair for Civil Judges / Sr. Division Judges: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with Leatherite upholstery covers and moulded Polyurethane foam. The seat has extra thick foam on front edge to give comfort to potential area. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE51.0 cm. (W) x 70.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 14±2 kgf as per IS:7888 for 25%compression. ARMRESTS: The adjustable armrest is designed with the following features : · Up-Down adjustment · 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon · Fixed Armrest Top is PU moulded over Polypropylene insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: The mechanism is designed with the following features: · 360° revolving type. · 3 positions locking with anti shock mechanism. · Tilt tension adjustment. HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair. The complete headrest assembly is retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. Pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 117.5 - 127.5 CM. SEAT HEIGHT (SH): 46.0 - 56.0 CM. |
| 7 | Revolving Chair for Asstt. Admin Officers and Admin Officers- High Back Chair with Dimension WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 117.0 - 130.0 CM. SEAT HEIGHT (SH): 44.5 - 54.0 CM. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat has extra thick foam on front edge to give comfort to potential area. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. SEAT SIZE:53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : · Up-Down adjustment · 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon · Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: The mechanism is designed with the following features: · 360° revolving type. · 3 positions locking with anti shock mechanism. · Tilt tension adjustment HEADREST:The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair. The complete headrest assembly is retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. |
| 8 | Revolving Chair for Admin Officers / Asstt. Admin Officers - SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. Thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat has extra thick foam on front edge to give comfort to potential area. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE51.0 cm. (W) x 70.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 14±2 kgf as per IS:7888 for 25%compression. ARMRESTS: The adjustable armrest is designed with the following features : · Up-Down adjustment · 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon · Fixed Armrest Top is PU moulded over Polypropylene insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: The mechanism is designed with the following features: · 360° revolving type. · 3 positions locking with anti shock mechanism. · Tilt tension adjustment. HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair. The complete headrest assembly is retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. Pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 117.5 - 127.5 CM. SEAT HEIGHT (SH): 46.0 - 56.0 CM. |
| 9 | Revolving Chair for Staff of High Court /District Courts – Supplying and placing of High Back Chair with dimension Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 99.5 to max 110.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. The seat assembly should be made up of 1.2 ±0.1cm. Thick hot-pressed plywood upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back assembly consist of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 70.5 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT MECHANISM: The mechanism should be designed with the following features: · 360° revolving type. · 17° ±2° maximum tilt on pivot at centers. · Upright position locking. · Tilt tension adjustment. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT MECHANISM: The mechanism should be designed with the following features: · 360° revolving type. · 17° ±2° maximum tilt on pivot at centers. · Upright position locking. · Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. Pitch-center dia (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. |
| 10 | Revolving Chair for High Court Employee / Staff District Courts – Mid Back Revolving Chair – SEAT/BACK: The seat and back shall be made up of 1.2 cm thick hot pressed plywood, upholstered with changeable fabric upholstery covers and moulded Polyurethane foam, together with moulded back-spine cover. The back foam shall be designed with contoured lumbar support for extra comfort having back size of 47.5 cm.(W) x 58 cm.(H) & seat size 47.0 cm.(W) x 48.0 cm.(D). The Foam used in chair shall be Polyurethane foam which shall be moulded with density = 45 +/- 2 kg/m3 and Hardness = 20 +/- 2kg on Hampden machine at 25% compression. ARMRESTS (FIXED): The one-piece armrests are injected moulded from Black co-polymer polypropylene. The armrests shall be scratch and weather resistant. The armrests shall be fitted to the seat with armrest brackets made of 0.5cm. thk. HR steel. CENTRE TILT SYNCRO MECHANISM: The mechanism shall be designed with the following features: · 360° revolving type · Upright position locking · Seat/back tilting ratio of 1:3 · Tilt tension adjustment (6 DEG SEAT TILT/18 DEG BACK TILT). PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment shall have an adjustment stroke of 12.0 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow shall be 3-piece telescopic type and it is injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is injected moulded in black 33% glass filled Nylon -66 and fitted with 5 twin wheel castors.The pedestal shall be 66.3cm. Pitch-centre dia. (76.3 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% glass filled black Nylon. Overall dimensions of Chair shall be Width- 76.3 cm, Depth- 76.3cm, Height- 85.5cm-97.5cm, Seat Height- 42.5cm-54.5cm. |
| 11 | 2. SECTION B - VISITOR CHAIRS |
| 12 | Hon"ble High Court Judges Visitor Chair – SEAT/BACK ASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3, and hardness load 16 ± 2 kgfor25% compression. The stitched cover should be made from spacer fabric and leatherette. Cushioned back should be made of PU Foam with in molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. Seat SIZE :47.0 cm. (W) x 48.0 cm. (D) BACK SIZE : 45 cm. (W) x 60.5 cm. (D) TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame should be cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Overall Dimensions of Chair Seat Height - 44.8cm. Height - 99.5cm. Width-60.9 cm and Depth-64.3 cm. |
| 13 | Visitor Chair for High Court - Providing, supplying and placing of Visitor Chair. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to potential area.The chair is available in three models.*PCH-9U01RG/9U02RG/9U12RG SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS :The one-piece armrests are injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME (FOR 9U12RG): The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair WIDTH (W): 61.4 CM. DEPTH (D): 64.5 CM.HEIGHT (H): 89.5 CM. SEAT HEIGHT (SH): 46.5 CM. |
| 14 | Registry Officers High Court / District Judges / Sepcial Judges / Court Room Visitor Chair - Providing, supplying and placing of Visitor Chair: SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to potential area.The chair is available in three models.*PCH-9U01RG/9U02RG/9U12RG SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The one-piece armrests are injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME (FOR 9U12RG): The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair WIDTH (W): 61.4 CM. DEPTH (D): 64.5 CM. HEIGHT (H): 89.5 CM. SEAT HEIGHT (SH): 46.5 CM. |
| 15 | Visitor Chair for District Judges / Special Judges / Court Room Visitor Chair – SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. Thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam with PVC lapping all around. The back foam should be designed with contoured lumbar support for extra comfort. BACK SIZE: 49.0 cm. (W) x 47.0 cm. (H) SEAT SIZE:49.0 cm. (W) x 44.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 ±2 kg/m3 and Hardness load 16 ± 2 kg for 25% compression. ARMRESTS: The armrest tops should be injection moulded from black Polypropylene. They should be fitted to tubular armrest supports made of Ø2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). The tubular armrest supports hold together the seat and back. TUBULAR FRAME: The tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). BACK SIZE: (W) 49.0cm x (H)47.0 Cm, SEAT SIZE: (W) 49.0cm x (D) 44.0cm. Overall Dimensions of Chair Seat Height - 43.0 Height - 80.0cm. Width & Depth of Chair as measured from pedestal - Width-55 cm and Depth-61.0 cm. |
| 16 | 3. SECTION C – NORMAL CHAIRS |
| 17 | Plastic Chairs – Providing, supplying and placing of cafe chair. SHELL: The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for color chart). SHELL SIZE: 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H) 2. M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powdercoated (DFT 50±10 microns) welded tubular frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W tube. The 0.16 ± 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and is fitted at the end of the tubular frame. WIDTH (W): 51.5 CM DEPTH (D): 52.5 CM HEIGHT (H): 81.8 CM SEAT HEIGHT (SH): 45.9 CM. |
| 18 | Cane Chair – Providing, supplying and placing of chair. SEAT/BACK ASSEMBLY: The seat and back should be made from seasoned wood, knitted with cane and finished with synthetic paint (black). Back size: 45.7 cm. (W) X 39.0cm. (H). Seat size: 45.7 cm. (W) X 42.4cm. (D). CANE FOR SEAT/BACK: Cane should be produced from blends of High and Low density Polyethylene The Cane high tensile strength at break = 1400 Kg/cm2 (min.) & Elongation at break = 54% maximum. CANE FOR SEAT/BACK: Cane should be produced from blends of High and Low density Polyethylene The Cane high tensile strength at break = 1400 Kg/cm2 (min.) & Elongation at break = 54% maximum. ARMREST TUBE: The armrest tube should be made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and welded to the understructure assy. ARMREST: The armrest should be gas-as should be ted injection moulded from black Polypropylene. UNDERSTRUCTURE ASSEMBLY: The understructure assembly should be a cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns). Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 88.0cm. Width & Depth of Chair as measured from base - Width-58.0 cm and Depth-57.5 cm. |
| 19 | 4. SECTION D - TABLES |
| 20 | Table for High Court Chamber- Providing supplying and placing of Main Table, ERU & pedestal. 1800x2100x750 Primary Work Surface made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 04mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top . Under structure Made of 25mm Thick Pre-Laminated with board of E1-E2 grade and approved shade confirming tp IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping . Integrated Pedestial Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2mm thick PVC lapping . Drwwer fonts made of 25mm thick MDF one side pre-laminated board confirming to IS-14587:1998 with0.4mm PVC membrane pressde on to top Pedestal construction is BOX-BOX-FILE type which Uses Powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening . Pedestal are provide with lock for security. |
| 21 | Hon"ble High Court Judges Chamber Table – MAIN TABLE with SIDE TABLE: Table is provided with one drawer + Cupboard Unit with Hinge Door attachment on RHS/LHS. Table Top: 1800 x 1200. Made of 25mm Thick (± 1mm) Pre-laminated Particle Board with 2mm PVC lipping. Other Panels: Made of 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lapping. Side table should be made of Size 1050W x 450D x 740Hmm Drawer bottom panel to be made up of 9mm thick (±lmm) Pre-laminated Particle Board. Locking to be provided on top drawer & Cupboard.Overall Size- 1800W x 2250D x 740H mm. Top and Legs shall be made of 25mm Thk. PLB and Modesty Panel shall be made of 18mm Thk PLT. Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Other Panels: Made of 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lapping. Side table should be made of Size 1050W x 450D x 740Hmm Drawer bottom panel to be made up of 9mm thick (±lmm) Pre-laminated Particle Board. Locking to be provided on top drawer & Cupboard.Overall Size- 1800W x 2250D x 740H mm. Top and Legs shall be made of 25mm Thk. PLB and Modesty Panel shall be made of 18mm Thk PLT. Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. |
| 22 | Tables for Registry Officers and District Court Judges Chamber –Providing, supplying and placing of Main Table, ERU & pedestal. 1650x1950x750 Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-bulid power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. |
| 23 | Conference Table / Head Module – Work Surface : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Understructure : It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Aluminum alloy 63400: WP profile is used for connecting panels together. The product has a knock-down construction. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Modesty Panel : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513, epoxy polyester powder coated (DFT 40-60 microns) Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop. Head Module is Dimension of Head Module is 1800 X 850 X 740 mm which consists of 4-Seater. |
| 24 | Conference Table / One Seating Module– Work surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Understructure: It consists of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Aluminum alloy 63400: WP profile is used for connecting panels together. The product has a knock-down construction. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Modesty Panel : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513, epoxy polyester powder coated (DFT 40-60 microns) Wire Management : An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop. Head Module is Dimension of per Seating Module is 675 X 600 X 740mm. |
| 25 | Conference Table / Two Seating Module– Worksurface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Understructure: It consists of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Aluminium alloy 63400: WP profile is used for connecting panels together. The product has a knock-down construction. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Modesty Panel: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513, epoxy polyester powder coated (DFT 40-60 microns) Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop. Two Seating Module is Dimension of Two Seating Module is 1350 X 600 X 740 mm. |
| 26 | Chamber Tables of District Judges of District Courts – Trident Middle Main Desk with ERU (RHS) size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height (ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Venge and savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards. 2- Drawer and 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of different colors. Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks.PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal C21Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. |
| 27 | Chamber Tables of Civil Judges:Providing, supplying and placing of Main Table. 1650x750x750 Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-bulid power box are provided on work surface for wire management. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Understructure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal C21Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. |
| 28 | Tables for District Judges – Providing And Placing OFFICE TABLE : Table is to be provided with One drawer + Hinge Drawer Unit attachment on RH side. Top Panel of size: 1500 x 740. Made of 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lipping. Other Panels to be made from 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lapping. All drawer bottom panels made up of 9mm thick (±lmm) Pre-laminated Particle Board. Locking has been provided on top drawers only. Overall Size: 1500W x 750D x 750H mm. PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal C21Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. |
| 29 | Tables for DIAS for High Court / District Court – Providing and placing- DIAS TABLE: Table is provided with one drawer + Cupboard Unit with Hinge Door attachment on RHS/LHS. Table Top: 1800 x 1200. Made of 25mm Thick (± 1mm) Pre-laminated Particle Board with 2mm PVC lapping. Other Panels: Made of 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lipping.Drawer bottom panel to be made up of 9mm thick (±lmm) Pre-laminated Particle Board. Locking to be provided on top drawer & Cupboard. Overall Size: 1800W x 1200D x 740H mm. Top and Legs shall be made of 25mm Thk. PLB and Modesty Panel shall be made of 18mm Thk PLT. |
| 30 | Tables for Staff of High Court / District Courts - Reader / DW / Steno – Providing, supplying and placing of office Table. Enterprise 1350 Table without CPU Hanger size shall be 1350 Width mm x 750 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edge banding. Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish: powder Coat (epoxy polyester). Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW Tube, finish powder coat ( epoxy polyester).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyester) plus the drawer front shall be 0.8mm thick CRCA Finish powder coat (epoxy polyester) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyester)and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyester). |
| 31 | Staff Table for High Court / Reader / DW / Steno – Providing and placing - OFFICE TABLE: Table is to be provided with one drawer + Hinge Drawer Unit attachment on RH side. Top Panel of size: 1500 x 740. Made of 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lapping. Other Panels to be made from 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lapping. All drawer bottom panels made up of 9mm thick (±lmm) Pre-laminated Particle Board. Locking has been provided on top drawers only. Overall Size: 1500W x 750D x 750H mm. |
| 32 | Staff Table for District Courts - Reader / DW / Steno– Providing and placing: OFFICE TABLE: Table is provided with one drawer + Hinge Drawer Unit attachment on Right Hand side. Top Panel; 1350 x 750. Made of 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lapping. Other Panels: Made of 25mm Thick (±lmm) Pre-laminated Particle Board with PVC lapping. Drawer bottom panel to be made up of 9mm thick (±lmm) Pre-laminated Particle Board. Locking to be provided on top drawer only. Overall Size: 1350W x 750D x 750H mm. PVC membrane pressed on to top Pedestal construction is BOX BOX-FILE type which Uses powder coated 400 MM long metal C21Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. |
| 33 | Computer Table for Computer Operator– Providing and placing of OFFICE TABLE: The Main Table should be of Size - 1200 x 610 x 760mm -/+ 20 mm. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-BACK UNIT lid power box are provided on work surface for wire management Modesty Panel should be made of 25mm thick pre-laminate twin board confirming to IS-14587:1990 edge banded with matching 2mm thick PVC lapping. Under structure should bemade of 25mm thickpre-laminate twin board E1-P2 grade and approved shade confirming to IS-14587:1990 edge banded with matching 2mm thick PVC lapping Hinge Door Storage should bemade of 25mm thick pre-laminate twin board E1-P2 grade and approved shade confirming to IS-14587:1990 edge banded with matching 2mm thick PVC lapping. Handle should be provided for easy opening and storage is provided with Cam lock for security. |
| 34 | Centre Table for High Court / District Court - Providing, supplying and placing of coffee table - PISA SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for forcing with understructure. PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm. |
| 35 | Staff Table - Providing, supplying and placing of table. Work - 4020 size shall be 1200 Width x 600 Depth x 740 Height. The top shall be made from 25 mm thick pre- laminated board. All the edges are sealed with 2 mm thick PVC edge band all around. Side panels shall be made from 25 mm thick pre- laminated particle board. All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side. The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board. All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement. The drawers are provided with suitable slides for smooth operation. All the pedestal drawers are centrally locked with a single key. Drawer slides are of Hettich. |
| 36 | 5. SECTION E - SOFA |
| 37 | SOFA 3 Seater - The seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should beupholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of super soft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose .t should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. Width (W): 205.5 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM. Ergonomic Back Support, Soft Touch Fine Finish, Durable Shaneel Fabric, also available in Rich Black Leatherite. |
| 38 | SOFA 2 Seater - The seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of super soft foam of density 23±2 kg/cu.mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose. it should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. Width (W): 146.0 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM. Ergonomic Back Support, Soft Touch Fine Finish, Durable Shaneel Fabric, also available in Rich Black Leatherite. |
| 39 | SOFA 1 Seater - The seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of super soft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. Width (W): 86.0 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM. Ergonomic Back Support, Soft Touch Fine Finish, Durable Shaneel Fabric, also available in Rich Black Leatherite. |
| 40 | 5 Seater Sofa in combination of 3+1+1 - Providing, supplying and placing sofa set (3+1+1) - Seat:(1 Seater, 2 Seater, 3 Seater, Chaise, Corner, Wing chair) Understructure: Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of Understructure cross sections 22x64mm,34x64mm and 16x35mm without having major knots & defects on the surface. Complete understructure of Seat is made by gluing, nailing & stapling. Non-woven fabric of 100GSM is stapled on the top surface after attaching Zig-Zag spring to cover the structure. Seat support tube made up of Steel is added in the seat structure of 2Seater, 3Seater and Chaise for additional strength & support. Foam: Seating surface is made by using pocket spring of wire dia 2mm which is surrounded by PU foam of density 28 kg/m3. A top layer of super soft PU foam with density 32 kg/m3 is used to provide softness. Upholstery cover: Upholstery cover of seat is made of woven fabric. Backrest: (1 Seater, 2 Seater, 3 Seater, Chaise, Corner, Wing chair)Understructure: Understructure is made up of combination of pinewood members, 12mm THK ·Plywood and HDPE sheet. Pinewood are of cross sections 16x35mm, 16x74mm, 25X25mm without having major knots & defects on the surface. Foam: Backrest is made of PU foam with density 60 kg/m Upholstery Cover: Upholstery cover of backrest is made of woven fabric. Cushion: (1 Seater, 2 Seater, 3 Seater, Chaise, Corner, Wing chair) Cushion is made up of loose recron filled in White non-woven 30 GSM bag. This stitched non-woven bag is kept inside the upholstery cover of cushion pillow. Upholstery Cover: Upholstery cover of cushion is made of woven fabric. The cover is in dual tone, bottom half made with Fabric-1(woven finish fabric) & upper half with Fabric-2(velvet finish fabric). Legs: Polypropylene leg (with 20% talc for better filled with M8 steel stud in black color. Armrest (Normal Amrest LH & RH & wing Armrest) Understructure: Understructure of armrest is made up of combination of pinewood members, 12mm thick Plywood, 3mm thick MDF. Pinewood is of cross sections 16x79mm without having major knots & defects on the surface. Complete understructure of Armrest is made by gluing, nailing & stapling. Foam: Foaming of Armrest is done with density 28kg/m3 and 60kg/m³. Complete understructure of Armrest is made by gluing, nailing & stapling. Bolster: Bolster is a small loose cushion filled with loose recron in white non-woven 30 Gsm bag. This bag is placed in main upholstery cover. Assembly:Modular SKUs like 1str, 2str, 3str, Chaise, Corner can be fitted with each other with the help of Steel connecting brackets provided on the seat structure & nut-bolt provision on backrest. |
| 41 | 6. SECTION F - ALMIRAH (Furniture manufacturer"s name should be embossed on the furniture articles) |
| 42 | Steel Almirah - Providing, supplying and placing of almirah. Storwel plain shall have an overall size of916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of color options and shelving options shall be available. |
| 43 | Glass Door Almirah - Providing, supplying and placing of almirah. Glass Door Storwel shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of color options and shelving options shall be available. |
| 44 | SMALL Almirah Plain - Storwel Minor plain shall have an overall size of 765mm(W)x440mm(D)x1270mm(H) with welded construction. It should have the shelf thickness of 0.7mm, Back thickness of 0.8mm and all other components shall be 0.9mm thick. These components are made of CRCA ‘D’ grade high yield strength as per IS:513. The storwel Minor should have a three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting (3 nos.) which shall have a Uniformly Distributed Load capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). |
| 45 | 7. SECTION G - Filing Cabinet |
| 46 | Vertical Filing Cabinet 4 Drawer: Providing, supplying and placing of cabinet. Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA. It should have 1 Point Locking Mechanism and a Rigid Knock down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). |
| 47 | 8. SECTION H - Drawer |
| 48 | TOP SUPPORTING Pedestals -Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 720mm ht 3dr = 2box+1file. |
| 49 | 9. SECTION I - Tray (KBPT) |
| 50 | Key Board Pull out Tray is made of 0.9mm thick CRCA "D" Grade as per IS-513 (Size- 482mm(W) X 280mm(D) X 40mm(H) -Tolerance +/- 10 mm) within ball slide of 350mm (long) X 11.8mm (thick) X and ball slide should have single extension (stroke - 230 mm) and ball slide should made of combination of 1.2/1.5 mm thick roll-formed CRCA "D" grade as per IS-513. KBPT should have retro fittedmouse tray (size 210mm X 210 mm) at right hand or left hand as per user requirement and mouse tray should made of 0.9mm Thick CRCA "D" grade as per IS-513. |
| 51 | 10. SECTION J - Stool |
| 52 | Providing, supplying and placing of stool. SEAT ASSEMBLY: li should be circular type 0 30.0±0.5cm and made up of 0.1±0.012cm thk CR Steel. It should be welded to the understructure and black powder coated (DFT 40-60 microns) UNDERSTRUCTURE ASSEMBLY: The understructure should be made of MS tube 0 2.2±0.03cm x 0.16±0.0128cm thk MS ERW tube. It should be welded to the MS fabricated circular seat assembly and black powder coated (DFT 40-60 microns). The understructure should be provided with black PP injection moulded ferrules. Overall dimensions of stool are: Width- 47.3 cm, Depth- 47.3cm, Seat Height-46.5cm. |
| 53 | 11. SECTION K - Footrest |
| 54 | Footrest platform should be of size 450mm X 300mm and made of Plastic-(High Impact Polystyrene) in black color and it"s frame should be crome plated. Overall Tolerance +/- 10mm. |
| 55 | 12. SECTION L - Racks |
| 56 | Boltless Racks: Product specification for Boltless shelving - Depth (, mm) 500 , Width (mm) 1300, L/L Height (mm) 425 mm & 349 mm in top shelf, System Height (mm) 2500, Upright Height (mm) 2495 , Self loading capacity 142 . UDL, WITH 6.1 UPRIGHT : Upright type - Upright G50, Profile, ‘T’ Profile, Profile Size 50 mm x 37 mm, No of bends 9 bends, Level adjustability 25 mm, Material Grade Min Ys=210 Mpa, Mfg process Roll forming, Finish Powder coated finish on Zinc coated steel, Color Oxford Blue, 6.2 SHELF: Width 1300 mm, Depth 500 mm, Material Zinc coated, Shelf Height 32mm,No of bends 14, Mfg Process Roll formed, Fasteners NO, Mounting ‘4’ nos. of clips per shelf ( no bolting), Surface finish Zinc Coated spangle free fine finish, 6.3 BRACINGS Section Flat Mid rib and end bends, Mfg process Press forming, Connectivity Hooking & Pin it, Surface finish Zinc coated, SHELF CLIP Profile section 24 x 8 x 35mm, Material GI, Mfg process Blanking & Punching, No of bend 2, Connectivity Insertion, Surface finish Galvanized, 6.5 STABILITY MEMBER: Profile section 20 x 25 x 54mm, Material Zinc coated Mfg process Notching & Folding, No. of bends 2, Connectivity Hooking & pin it. STRUCTURAL ANALYSIS AND TESTING: The Racks / Shelves/ selves are tested for structural rigidity and safety. Design analysis and development activities are validated and approved by premier structural institutes and organization. |
| 57 | Slotted Angle Rack: Supply and Installation of Slotted angle rack having shelves material 0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513, angle size of 40x40x2mm, ground clearance is 55mm +/-2, with Powder coated to avoid rust & corrosion. Dimensions are H 1830mm, W 915mm & D 457mm. |
| 58 | 13. SECTION M – WORKSTATIONS (MODULAR FURNITURE) |
| 59 | WISH panel & tile based modular workstation: with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric magnetic. Bottom tiles: Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management: Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs:metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. |
| 60 | RECTA WORKSTATIONS - 1200 X 600 X 1200H: 1Seater: Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht – 1200 including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom Tiles- Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs- Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface- out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 61 | RECTA WORKSTATIONS - 1200 X 600 X 1200H: 2Seater ( BACK to BACK): Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs- Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface- out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 62 | RECTA WORKSTATIONS - 1200 X 600 X 1200H: 4Seater ("+" Cluster) : Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 63 | RECTA WORKSTATIONS - 1350x750x1200: 1Seater: Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs- Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - Out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 64 | RECTA WORKSTATIONS - 1350x750x1200: 2Seater (Back to Back): Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mmthk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles- Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 65 | RECTA WORKSTATIONS - 1350 X 750 X 1200H: 4Seater ( "+" Cluster) : Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mmthk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 66 | RECTA WORKSTATIONS - 1500x750x1200: 1Seater: Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 67 | RECTA WORKSTATIONS - 1500x750x1200: 2Seater (Back to Back) : Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mmthk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 68 | RECTA WORKSTATIONS – 1500 x750 x1200: 4Seater ( "+" Cluster) : Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom Tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - Out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 69 | PENTA WORKSTATIONS - 1500 X 1500 X 1200H: 1Seater: Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles are fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 70 | PENTA WORKSTATIONS - 1500 X 1500 X 1200H: 2Seater (Side By Side): Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200including powder coated aluminum trims. Tiles: Combination of top tiles is fabric. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in DL +DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - Out of 25 mm thk prelam particle board with flat pvc lapping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. |
| 71 | 14. SECTION N - Back Unit for Chambers |
| 72 | Unit Size: 1650x500x750 mm. The top shall be made up of 12 mm The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-BACK UNIT lid power box are provided on work surface for wire management Modesty Panel should be made of 25mm thick pre-laminate twin board confirming to IS-14587:1990 edge banded with matching 2mm thick PVC lapping. Under structure should be made of 25mm thick pre-laminate twin board E1-P2 grade and approved shade confirming to IS-14587:1990 edge banded with matching 2mm thick PVC lapping Hinge Door Storage should bemade of 25mm thick pre-laminate twin board E1-P2 grade and approved shade confirming to IS-14587:1990 edge banded with matching 2mm thick PVC lapping. Handle should be provided for easy opening and storage is provided with Cam lock for security. |
| 73 | 15. SECTION O - BENCH |
| 74 | Three Seater Bench for Waiting Area - Providing, supplying and placing of waiting chair. The seat shell should be a welded assembly of seat, back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforated. They should be welded to side frame of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel. The welded assembly should be powder coated (DFT 40-60 microns). The seat has a front water fall edge to provide potential clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small chlidren from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) BACK SIZE : 41.6 cm (W) x 23.0 cm (H)Understructure assemblyconsists of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk. The welded structure assembly should be powder coated (DFT 40-60 microns).The leg assembly should be fitted with shoes and Levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take should be of uneven flooring. Connecting beam should be fitted with snap locking end cap. lt also aids in side-by-side understructure alignment .Armrest assembly consists of armrest frame and armrest pad. The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated (DFT 40-60 microns). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. Overall Dimensions of Chair : Seat Height - 44.1 cm. Height - 78.5 cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
