}

Tender For Annakara Glp In Elavathur Area. School No. 46 Anganwadi Construction, MULLASSERY-Kerala

Grama Panchayat has published Tender For Annakara Glp In Elavathur Area. School No. 46 Anganwadi Construction. Submission Date for this Tender is 16-01-2024. Building Work Tenders in MULLASSERY Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

41554256
Tender For Annakara Glp In Elavathur Area. School No. 46 Anganwadi Construction
Open Tender
Indian
Kerala
MULLASSERY
16-01-2024

Tender Details

Tender For Annakara Glp In Elavathur Area. School No. 46 Anganwadi Construction Stone Aggregate(single size): 40 mm nominal size cum 1995 4.7833 80704320176800+GST+Cess 1%Stone Aggregate(single size):20 mm nominal size cum 2205 10.6685 Coarse sand (zone III) cum 2415 16.3985 Portland Cement tonne 10240 11.5369 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper Day 1760 1.7322 Vibrator (Needle type 40 mm) Day 800 1.7322 Sundries L.S 2.71 9425.2 Stone for masonry work cum 1837.5 23.915 Through and bond stone size 24 x 24 x 39cm 50 nos 142.8 40.838 Stone Aggregate(single size): 10 mm nominal size cum 2205 4.3613 Royalty for good earth cum 118 14.776 Solid blocks of size 30x20x15cm each 40 2785.84 Anjili wood scantls cum 85000 0.4264 Structural steel such as tees, angles, channels and R.S. joists quinta l 7740.8 0.5847 Red oxide Zinc chromate primer Litre 177 0.4731 Adjustable telescopic prop 3 m (2.02-3.75m) each 1663.8 0.8505 Beam clamp 300-380 mm (450- 1070 mm) each set 601.8 0.2194 Second class kail wood in planks 10 cud m 44.84 200.284 Second class kail wood in scantling 10 cud m 45.08 58.6192 Hollock ballies 125 mm diameter metre 383.04 21.5446 Adjustable span ESO+SI (2.35- 3.40) each 2596 0.4897 Twisted steel/deformed bars quinta l 8260 16.2519 Fine sand (zone IV) cum 1942.5 5.3189 Mild Steel round bar above 12 mm dia quinta l 7611 1.0833 Flats up to 10 mm in thickness quinta l 7528.4 0.3832 Rawl plug 50 mm (designation 10 nos) each 41.3 52.5245 Klin seasoned selected sheesham wood planks 10 cud m 106.2 66.4278 Kiln seasoning of timber cum 1100 0.1053 Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm 10 nos 9.68 9.0585 Bright finished or black enameled mild steel screws 40 mm 50 nos 2.01 210.184 Hollock wood in planks 10 cud m 64.9 38.8871 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 10 nos 13.92 5.3031 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 10 nos 8.5 1.7679 Bright finished or black enameled mild steel screws 20 mm 50 nos 1.06 22.9567 Anjili wood planks cum 90000 0.056 Anodised Aluminium sliding door bolt 300x16 mm each 259.6 3 Chromium plated Brass screws 25 mm 50 nos 5.78 35.9996 Anodised Aluminium handles 10 60.18 6 125 mm with plate 175 x 32 mm nos Oxidised mild steel tower bolt (barrel type) 200x10 mm each 63.72 6 Oxidised mild steel screws 30 mm 50 nos 1.75 48.0016 Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm 10 nos 23.01 42 Bright finished or black enameled mild steel screws 50 mm 50 nos 2.48 336.001 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. sqm 401.2 3.7146 Vitrified floor tile 60x60 cm sqm 1062 47.6676 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black sqm 401.2 24.3725 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre Litre 112.1 12.9868 Plastic emulsion paint Litre 365.8 22.4487 Synthetic enamel paint in black or chocolate shade Litre 295 1.4477 Multi surface paint Litre 424.8 1.3268 Special primer (C.W) Litre 230.1 1.1057 Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile metre 578.2 17.1 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) sqm 3481 4.725 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 10 nos 20.06 7.9412 Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers each 531 2 Vitreous china pedestal type wate closet each 1628.4 2 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) each 979.4 2 Polyethylene water storage per 9.44 500 tank with cover and suitable locking arrangemnet litre Vitreous China flat back wash basin 630x450 mm each 1239 2 15 mm C.P.brass tap each 377.6 4 C.P. brass waste 32 mm each 135.7 2 C.I. bracket for wash basin and sinks pair 141.6 3 Stainless steel (Grade - 304) hollow section round/square tubes kg 566.4 63.3549 Stainless steel bolts /square bar and plates kg 401.2 30.169 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm each 2183 1 PVC pipe 25 mm outer dia. 10kgf cm2 metre 60 36.55 PVC pipe 32 mm outer dia. 10Kgf/cm2 metre 70 23 PVC pipe 50 mm outer dia.6kgf/cm2 metre 110 11.5 PVC pipe 63 mm outer dia . 6kgf/cm2 metre 120 15.75 PVC bend 110 mm dia each 150 3 PVC door Elbow 110 mm dia each 130 2 PVC door Tee 110x110x110 mm dia each 160 3

Key Value

Document Fees
INR 800 /-
EMD
INR 20176.0 /-
Tender Value
INR 8.07 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail