Haryana Vidyut Prasaran Nigam Limited-HVPNL has published Line-1: Construction Of 220Kv D/C Line From 400Kv S/Stn. Pgcil Bahadurgarh To 220Kv S/Stn. Metl Dadri Toe With Acsr Moose Conductor By Hvpnl As A Deposit Work Of M/S Model Economic Township Limited, 3Rd Floor, 77-B, Iffco Road, Sec-18, Gurugram.Line-2: Cr. Submission Date for this Tender is 19-03-2024. Conductor Tenders in gurugram Haryana. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 21-Feb-2024 | Corrigendum_1 | Date | 05-03-2024 |
2 | 11-Mar-2024 | Corrigendum 2 | Date | 19-03-2024 |
Sl. No. | Item Description |
1 | Construction of 220 kV transmission lines in Kaithal, Rohtak and Jhajjar area on turnkey basis |
2 | Fabrication and supply of following tower parts with stubs, bolts & nuts, step bolts, U-bolts, hangers, D-shackle etc. of following Designs: 220kV DA type towers (TATA Design ) |
3 | i) +3 mtr. Extn. Only |
4 | ii) +6 mtr. Extn. Only |
5 | 220kV DB type towers (TATA Design ) |
6 | i) +3 mtr. Extn. Only |
7 | ii) +6 mtr. Extn. Only |
8 | iii) +9mtr. Extn. Only |
9 | 220kV DC type towers (TATA Design ) |
10 | i) +3 mtr. Extn. Only |
11 | 220kV DD type towers (TATA Design ) |
12 | i) +3 mtr. Extn. Only |
13 | ii). +6 mtr. Extn. Only |
14 | iii). +9 mtr. Extn. Only |
15 | iv). +15 mtr. Extn. Only |
16 | 220kV MD type towers (KRR Design ) |
17 | i) +3 mtr. Extn. Only |
18 | 1. +6 mtr. Extn. Only |
19 | 2. Extra Cross Arm Only (Set of 6) |
20 | 220kV MD+9 Special type tower (KRR Design) |
21 | 220kV MD+12 Special type tower (KRR Design) |
22 | 220KV D/C Gantry |
23 | Supply of earthing of Towers i) Pipe type |
24 | Supply of following Tower accessories i) Danger Plate |
25 | ii) Number Plate |
26 | iii) Phase Plate (set of 3) |
27 | iv) Circuit Plate (set of 2) |
28 | v) Bird Guard (Set of 3) |
29 | vi) Anti Climbing Device |
30 | vii) Glowing Plate |
31 | Conductor: 0.4” Sq. Inch ACSR Zebra Conductor (approx.) |
32 | Conductor: 0.5” Sq. Inch ACSR Moose Conductor (approx.) |
33 | 220 kV Post insulator |
34 | 220kV Silicon Rubber Polymer Insulator Strings i). 90 kN |
35 | ii) 160 kN |
36 | i) 70 kN |
37 | ii) 120 kN |
38 | Hardware Fittings of ACSR Moose Conductor 1. Single ‘I’ Suspension String |
39 | 2. Single Suspension Pilot String |
40 | 3. Single Tension String |
41 | 4. Double Tension String |
42 | Accessories for ACSR Moose Conductor i) Mid Span Compression Joint for conductor |
43 | ii) Repair sleeves for conductor |
44 | iii) Vibration damper for conductor |
45 | Hardware Fittings of ACSR Zebra conductor i) Single ‘I’ Suspension String |
46 | ii) Single Suspension Pilot String |
47 | iii) Single Tension string |
48 | iv) Double tension string |
49 | ACSR Zebra Conductor Accessoriesi)Mid Span Compression Joint for conductor |
50 | ii) Repair sleeves for conductor |
51 | iii)Vibration damper for conductor |
52 | OPGW (24 Fiber) (DWSM, G.652D) (equivalent to Earth wire 7/3.15mm in all respect) which includes following portions:-(i) 400KV PGCIL Bahadurgarh – 220KV METL (Length 19.830KM) |
53 | OPGW (48 Fiber) (DWSM, G.652D) (equivalent to Earth wire 7/3.15mm in all respect) which includes LILO portion of one circuit 220KV Cheeka-Sonta line at 220KV S/Stn. Neemwala. |
54 | Hardware Set for above 24 OPGW Fiber Optic (equivalent to Earth wire 7/3.15mm in all respect) cabling including all cable fitting & accessories except joint box |
55 | Hardware Set for above 48 OPGW Fiber Optic (equivalent to Earth wire 7/3.15mm in all respect) cabling includingall cable fitting & accessories except joint box |
56 | FODP 48F: Indoor type, rack mounted with FCPC Coupling and pig tails (5mtrs. each) as applicable for 220KV S/Stn. METL & 400KV PGCIL Bahadurgarh |
57 | FODP 96F: Indoor type, rack mounted with FCPC Coupling and pig tails (5mtrs. each) at 220KV Neemwala |
58 | Joint Box 24 Fiber OPGW to OPGW (2-way Joint Boxes) (as applicable) (Quantity may varies as per drum schedule of OPGW) |
59 | Joint Box 24 Fiber OPGW to FOAC (as applicable for 400KV PGCIL Bahadurgarh & 220KV METL) |
60 | Joint Box (48 Fiber)3-way OPGW to OPGW |
61 | Fiber Optic Approach Cable, 24 fiber (DWSM) along with PLB HDPE Ducts of suitable size & strength and all accessories for 220KV METL & 400KV PGCIL Bahadurgarh |
62 | Fiber Optic Approach Cable, 48 fiber (DWSM) along with PLB HDPE Ducts of suitable size & strength and all accessories |
63 | Joint Box (48 Fiber) OPGW to FOAC |
64 | Wideband Communication equipment and spares Telecom Equipment as required SDH Equipment (STM - 16 MADM upto 5 MSP protected directions) Optical Interface Cards/SFP S4.1 SFP (The quantities will be decided at the time of detailed engineering) |
65 | L4.1 SFP (The quantities will be decided at the time of detailed engineering) |
66 | Equipment Cabinet with DDF and all installation accessories Integration of the Equipment with existing network Note: Above quantity covers the requirement of remote station as well. |
67 | Mandatory Spares Telecom Equipment as required for 220KV METL & 400KV PGCIL Bahadurgarh SDH Equipment (STM - 16 MADM up to 5 MSP protected directions) Optical Interface Cards/SFP S4.1 SFP (The quantities will be decided at the time of detailed engineering) |
68 | L4.1 SFP (The quantities will be decided at the time of detailed engineering) |
69 | Tributary cards Pre Connectorized Optical Patch Cards (10Mtrs.) – Pack of six Patch Cards |
70 | Dismantlement to be taken in Erection part Only Dismantlement of existing ACSR Zebra Conductor along with hardware fittings and accessories of line and its transportation, proper stacking at any dedicated store of HVPNL. |
71 | Dismantlement of following design of towers of existing line including its transportation:- The dismantlement of tower shall also include following: dismantlement of Stub concrete upto a depth of 1M (one meter) from Natural Ground level, back filling, compaction and clearing the site of debris. 220KV D/C DA+0 (TATA Design) Type Tower |
72 | 220KV D/C DB+0 (TATA Design) Type Tower |
73 | 220KV D/C DB+6 (TATA Design) Type Tower |
74 | Dismantlement of existing ACSR Zebra conductor along with Hardware fittings & Accessories and Insulators of line and its transportation, proper stacking at any dedicated store of HVPNL. |
75 | Dismantlement of existing Earthwire/OPGW along with Hardware fittings and accessories of line and its transportation, proper stacking at any dedicated store of HVPNL. |
76 | Any other item/items left out but required to complete the work |
77 | Detailed Survey |
78 | Furnishing bore log data |
79 | Construction of tower foundations as per HVPNL Drgs & Specifications for 0 to 6Mtr. extn. including excavation, concreting, supply and placement of steel reinforcement and backfilling complete in all respect. i) 220kV D/C "DA" type Tower (TATA Design) classified as - Dry |
80 | - Wet |
81 | i) 220kV D/C "DB" type Tower (TATA Design) classified as- Dry |
82 | - Wet |
83 | i) 220kV D/C "DC" type Tower (TATA Design) classified as - Wet |
84 | i) 220kV D/C "DD" type Tower (TATA Design) classified as- Dry |
85 | - Wet |
86 | i) 220kV M/C "MD" type Tower (KRR Design) classified as - Dry |
87 | - Wet |
88 | Construction of tower foundations as per HVPNL Drgs & Specifications for above 6Mtr. extn. including excavation, concreting, supply and placement of steel reinforcement and backfilling complete in all respect. i) 220kV "DB" type D/C Tower (TATA Design) classified as- Wet |
89 | i) 220kV D/C "DD" type Tower (TATA Design) classified as- Wet |
90 | i) 220 kV D/C Gantry(TATA Design) |
91 | i) 220kV M/C "MD" type Tower (KRR Design) classified as -Dry |
92 | . - Wet |
93 | Dewatering of subsoil water for lowering of water table to enable excavation of earth, concreting for foundations/stub and backfilling, by boring of tube wells or deploying well point system so that continuous lowering of water table is made till completion of work, without disturbing the soil characteristics. The rate shall include all type of expenditure for required dewatering arrangements and irrespective of type of tower including extensions if any. |
94 | Protection MeasureBrick masonry in 1:4 cement sand mortar including excavation |
95 | Earth filling, compaction, leveling etc inside revetments |
96 | M-20 (1:1½ :3 mix) concrete for top seal cover, for revetment etc. |
97 | Lean concrete (1:3:6) |
98 | Lean concrete (1:4:8) |
99 | RCC 1:1.5:3 (M20) including all material, labour, excavation, cutting and placing of steel, centering & shuttering, concreting etc. complete in all respect. |
100 | Earthwork in excavation in hard rock (blasting prohibited)upto 3m depth including dressing, backfilling, compaction and disposal of surplus material. |
101 | RCC (1:1½ :3) complete in all respect excluding centering, shuttering, finishing and reinforcement. |
102 | Centering, shuttering including strutting propping etc. and removal of formwork. |
103 | Steel reinforcement for RCC Work including cutting, bending, placing, binding etc. complete in all respect. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail