Tender For Supply Erection And Commissioning Of 2 Nos 35 Cs Axial Flow Water Lubricated Vertical Turbine Pump Along With 2 Nos 150 Hp 415 V 960 Rpm 6 Pole Ie2 Tefc 415 Volt 1250 Amp 3 Phase Motor Control Centre L.T. Panel At Babra Pump House In Jhaj, jhajjar-Haryana

Supply Erection And Commissioning Of 2 Nos 35 Cs Axial Flow Water Lubricated Vertical Turbine Pump Along With 2 Nos 150 Hp 415 V 960 Rpm 6 Pole Ie2 Tefc 415 Volt 1250 Amp 3 Phase Motor Control Centre L.T. Panel At Babra Pump House In Jhajjar , Supply, Erection And Commissioning Of 35 Cs. V.T. Mixed Flow Pumps Of 980 Rpm, Having Static Lift Of 25 Feet Including Ms Delivery Pipe As Per Site Requirement With All Flanges, Y-Body As Per Actual Site Requirement And Ms Delivery Bends Of Minimum 8 Mm Thickness With Bituminous Based Paint Inside & Culside Including Flange Welded, Ht Nut-Boits, Siphon Breaker Valve Bell Mouth And Support Of Bend With Any Other Left Over Item Duly Painted Inner And Outer Side Complete In All Respect, As Per Site Included Of All Civil Work Also And As Per Approved Technical Specifications. ( Annexure-A ) Note: Impeller Of Pumps Should Be Designed To Lift Waste / Sludge Water Of Stp And Mc Nala. , Supply, Erection And Commissioning Of Solid Shaft Motor Of Capacity 150 Hp, 980 Rpm, 3 Phase 415 Volt +-10%, 50 Hzwith Efficiency Class Ie2 ( As Per Is 12615 With Latest Amendments ) Suitable For 40 Cs. Vt Axial Flow Pumps With 6 Feet Lift Type Vertical Flange Mounted & As Per Approved Technical Specification With Earthing Of Motor Complete In All Respect As Per Site Requirements Complete In All Respect As Per Annexure-B. , Providing And Fixing Of Chemical Earthing By Digging Diameter 200Mm Bore, Complete With Gl Electrode With Gi Strip Of Suitable Length Of 400Ft. With Proper Specification And Proper Wiring With All Allied Accessories And Coke & Salt Etc Along With Name Plate Complete As Per Site Requirement , Providing And Laying Lt Armoured Pvc Copper Cable Of Size 185 Sqmm 3.5 Core With Copper Thimbles At Both End Conforming To Is 7098-1985 As Per Approved Makes. , Providing And Laying Lt Armoured Pvc Copper Cable Of Size 400 Sqmm 3.5 Core With Copper Thimbles At Both End Conforming To Is 7098-1985 As Per Approved Makes. , Supply Of 415 Volt, 1250 A, 3 Phase, 50 Hz., Motor Control Centre Lt Panel With Copper Bus Bar, Main Incomer With Fully Automatic Auto Transformer Starters For Operating 2 Nos. 150 Hp Motors Fitted With Suitable Range Of Acb, Mccb, Airbreak Contactors, Micro Controller Based Fault Protecting Devices / Relays, Capacitor Bank With Apfcr Relay, Duty Contactors And Other Allied Accessories Complete In All Respects As Per Approved Technical Specification In Annexure-C

INR 15000 /-

INR 250000.0 /-

INR 1.24 Crore /-

Name of Work:Supply Erection & Commissioning of 2 nos 35 Cs Axial flow water lubricated vertical turbine pump along with 2 nos 150 HP, 415 V, 960 RPM, 6 Pole, IE2, TEFC, 415 volt, 1250 Amp,3 phase Motor Control Centre L.T. Panel at Babra Pump House (Jhajjar) in W.S. Mech. Sub Division No 2, Jhajjar.

Sl. No.	Item Description
1	Supply, Erection and commissioning of 35 Cs. V.T. Mixed flow pumps of 980 RPM, having static lift of 25 feet including MS delivery pipe as per site requirement with all flanges, Y-body as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & culside including flange welded, HT nut-boits, Siphon Breaker Valve bell mouth and support of bend with any other left over item duly painted inner and outer side complete in all respect, as per site included of all civil work also and as per approved technical specifications. (Annexure-A) Note: Impeller of pumps should be designed to lift waste/sludge water of STP and MC Nala.
2	Supply, erection and commissioning of Solid shaft motor of capacity 150 HP, 980 RPM, 3 phase 415 Volt +-10%, 50 HZwith efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 40 Cs. VT Axial flow pumps with 6 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor complete in all respect as per site requirements complete in all respect as per Annexure-B.
3	Providing and fixing of Chemical earthing by digging diameter 200mm bore, complete with Gl electrode with GI strip of suitable length of 400ft. with proper specification and proper wiring with all allied accessories and coke & salt etc along with name plate complete as per site requirement
4	Providing and Laying LT Armoured PVC Copper Cable of size 185 Sqmm 3.5 core with copper thimbles at both end conforming to IS 7098-1985 as per approved makes.
5	Providing and Laying LT Armoured PVC Copper Cable of size 400 Sqmm 3.5 core with copper thimbles at both end conforming to IS 7098-1985 as per approved makes.
6	Supply of 415 Volt, 1250 A, 3 phase, 50 Hz., motor control Centre LT Panel with copper bus bar, main incomer with fully automatic auto transformer starters For operating 2 Nos. 150 HP motors fitted with suitable range of ACB, MCCB, Airbreak Contactors, micro controller based fault protecting devices/relays, capacitor bank with APFCR relay, duty contactors and other allied accessories complete in all respects as per approved technical specification in Annexure-C