|
| 1 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed by Engineer-in-Charge. (170+28) |
| 2 | M&L non skid ceramic coloured tile 7 to 8mm thick(square/rectangular) area of each tiles exceeing 0.06 sqm but not exceeding 0.11 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified and directed. (3+3) |
| 3 | M&L Glazed ceramic coloured tiles in verticle surface of size 350x250x7 / 450x200x7mm thick including 10 mm thick rendering in CM (1:4)Overand jointed in neat cement slurry and pointed in white or coloured cement to match complete. All as specified and directed. (60+7) |
| 4 | M&L for Vitified Ceramic tiles 8-9 mm thick (square/ rectangular) polished of any shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 15 mm thick screed bed in CM 1:6 and polishing complete all as specified and directed by Engr-in-charge. (100+18) |
| 5 | M&L for Vitified Ceramic tiles 8-9 mm thick (square/ rectangular) polished of any shade, area of each tiles not exceeding 0.36 sqm, in vertical surfaces such as dao and skirtingetc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 12 mm thick rendering in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge. |
| 6 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed |
| 7 | M&L for 18mm thickGranite (of any type)machine cut, in window cills, bathroom platforms, shelf platforms etc.bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover and including 15 mm thick screed bed in CM 1:6 and polishing complete all as specified and directed by Engr-in-charge. |
| 8 | M&L for 18mm thickGranite (of any type)machine cut, in vertical surfacesetc.bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover and including 12 mm thick rendering in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for 15-18mm thickGranite (green marble)machine cut, in window cills, bathroom platforms, shelf platforms etc.bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover and including 15 mm thick screed bed in CM 1:6 and polishing complete all as specified and directed by Engr-in-charge. |
| 10 | M&L for 15-18mm thickGranite (green marble)machine cut, in vertical surfacesetc.bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover and including 12 mm thick rendering in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge. |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in charge. |
| 12 | S&F Sinks made of stainless steel 1 mm thick kitchenwith plugs, washers and wastes; including bedding in cement mortar and connecting union to pipe,bowl size 405mm x 354mm x 203mm including s/s coupling and PVC waste pipe complete all as specified and directed by Engr-in-charge. |
| 13 | Hacking out old broken glass (any thickness, size, quality or description) form wooden or stone, concrete or brick surroundsl, glazed with putty or fixed with beads. |
| 14 | S & F in repairs 3mm thick sheet glass, figured glass, pin head type , glazing with oil putty area n exc 0.5sqm each pane complete all as specified and as directed by Engr in charge. |
| 15 | S&F Stainless stell wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples for complete all as specifed and directed. |
| 16 | M&L for old steel surfaces over 10 cm width or girth including preparation of oldsurfaces with 1 coats of syntheticenamelled paint complete all as specified and directed.. |
| 17 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified & directed. |
| 18 | Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing orremoval to store. |
| 19 | All as per item No 18above but 20 mm bore. |
| 20 | S&F for tubes, \"medium garde\" galvanised, with all fitting and fixed complete to walls and ceillings or laid in floor for 20mm bore pipecompleteall as specified and directed |
| 21 | All as per item No 20 above but 15 mm bore. |
| 22 | S & F in repair CP Health Faucet 8 mm diawith 1 meter long Easy flex tube and wall hook with NRV (black flow preventor) make - Jaguar Cat No ALD CHR - 583) complete all as specified and directed by engr-in-charge |
| 23 | S & F in repair Vitreous China wash basin, white, flat back, size 550mm x 400 mm with & including a pair of cast iron brakets embedded in PCC 1:3:6) type C-1 (using 20mm graded stone aggregate), blocks of size 10x7.5x15cm , and 32 mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed, ( excluding tap ) including PVC Waste coupling of PTMT 32mm dia (half or full threaded) Minimum weight 45gms , washers and Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete as specified and directed by Engr-in-Charge. |
| 24 | S&F inrepairs PVC flexible waste down pipe 32mm diawith full thread coupling and washers complete all as specified and directed by Engineer-in Charge. |
| 25 | S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete as specified and directed by Engr-in-Charge. make Jaquar |
| 26 | S&F in repairs Bib taps (15mm dia of bore), cast copper alloy with capstan heads, fancy type chromium plated ,screwed down, screwed for iron pipe or for brass ferrule and fixed includng neccesary fittings complete all as specified and directed by Engr-in-charge. |
| 27 | S&F in repais Pillar taps (15mm dia ofbore) , cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed brass chromium Concealed angle stop cock with wall flange of15mm dia capastan head including neccesary fittings complete all specified and directed by Engr-in-charge. |
| 28 | S&Fin repairs Stop valves( 15 mm dia of bore), cast copper alloy, fancy type Chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed as Engr-in-charge. |
| 29 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed as Engr-in-charge. |
| 30 | S&F10 ltr capacity PVC low level flushing cistern, valveless, duel symphonic action type, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cisterncomplete all as specified and directed. |
| 31 | S&F in repair viterous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap provision of flush pipe ,anti sypohonage pipe etc., with plastic wc seat cover (white)forclosed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging deviceof complete all as specified and directed. |
| 32 | Taking down PVC Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed. |
| 33 | S&F solid PVC door frame of size50mm x 47mm made out of 5 mm wood grain printedPVC sheetreinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 34 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. |
| 35 | Dismantling water tanks of 500 ltr capacity and removing to store |
| 36 | S & F in repairs 500 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 20mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) , hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc, complete as specified in SSR Part-I complete all as directed by Engr -in-charge. |
| 37 | S&F in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe. |
| 38 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 75 mm complete all as specified anddirected. |
| 39 | S&F Aluminium handle, cast type anodized size of handle 100 mm complete all as specified and as directed. |
| 40 | S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 100 mm complete all as specified and as directed. |
| 41 | Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc. (26+10) |
| 42 | S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall including clampscomplete all as specified and directed by Engineer-in Charge. (26+10) |
| 43 | S & F 110 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge. (3+1) |
| 44 | S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, with access doorcomplete all as specified and directed by Engr-in-charge. (3+1) |
| 45 | Excavating in trenches in soft/ loose soil, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc or for manhole , darin etc n ecx 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. (7+6+91.80) |
| 46 | S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints f, laid in trenches or in floorcomplete all as specified and directed by Engineer-in Charge. |
| 47 | Taking down floor trap/nahani trap of any description any size and making good to disturbed portion with cement concrete type B-1 1:2:4 with water proofing compound |
| 48 | M & L 75mm outlet dia PVC(SWR)floor trap, plainwith grating including jointing with solvent cementall as specified and directed. |
| 49 | M&L for concrete bed to drain pipes for 110mm bore SGSW/PVC SWR drain pipe in cm 1:4:8 type D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipesin foul smell condition complete all as specifed and as directed. |
| 50 | Demolition of brick work or stone/boulder masonary built in CM including all quoins, arches, pillars, etc but excludingashlar, facing, dressedstone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge (12+1+2) |
| 51 | M&L for brickwork with subclass \"B\" Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge. (12+5+5) |
| 52 | M&L for cement concrete 1:4:8 type D-2 (40mm aggregate) surface channels and drains etc. complete all as specified and directed by Engr in charge. |
| 53 | M & L Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all all as specified and directed. (1+0.50+1) |
| 54 | Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms ,oulds,mi-tred/stopped ends etc, complete all as specified and directed.(inner grith only measured) (30+100) |
| 55 | Add or deductfor each 25 mm girth or part thereof over 30cm inner grith ditto over item no 84 above complete all as specified and directed.(inner grith only measured) (30+100) |
| 56 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise all as specified and directed. |
| 57 | M&L for precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Type B1,1:2:4 (20mm graded aggregate) set in CM 1:4 complete all as specified and directed by Engr-in-charge. (0.18+0.50) |
| 58 | M&L for RCC (1:2:4) B0 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the likefinished fair and even, complete all as specified & directed. |
| 59 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping) rough finished, flat concrete surfaces complete all as specified and directed . |
| 60 | S&F Mild steel bars (TMT bars) 10 mm and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge. |
| 61 | S&F Mild steel bars (TMT bars) 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge. |
| 62 | Excavation in post hole each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out soft soil. (4+60) |
| 63 | M&L for cement concrete 1:3:6 type C-2 (40mm aggregate) columns , pillar and postsetc. complete all as specified and directed by Engr in charge. |
| 64 | Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges, complete all as specified & directed. |
| 65 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete,all as specified anddirected . |
| 66 | S&F in repairs steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 |
| 67 | S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed. |
| 68 | M&L for cement concrete 1:4:8 type D-2 (40mm aggregate) sub base of floors , mass concrete complete all as specified and directed by Engr in charge. (2+6.10) |
| 69 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamelpaint of approved tint over a coat of zinc chrome primer, complete all as specified & directed. |
| 70 | Taking down cement plaster on brick/blocksurfaes of walls or concrete surface etcall as specified and directed. (235+50) |
| 71 | M&Lfor rendering 15 mm thick(in two layers i.e. 10 mm + 5 mm thick ) in cement mortar 1:4 to other than fair faces of brick or concrete surfaces with WPC (as per manufacturer instruction)finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 72 | M&Lfor rendering 10 mm thick in cement mortar 1:6tofair faces of brick or concrete surfacesfinished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. (185+20) |
| 73 | Supply only WPCand applyas per manufacturer instruction complete all as specified and directed by Engr-in-charge. |
| 74 | M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth complete all as specified and directed. |
| 75 | M&L for apllying3mm thick wall careputty onwall and ceiling to provide smooth even surface complete all as specified and directed by Engr-in-charge. |
| 76 | M&L for preparation of newly plastered surfacesofwallsand applying two coats of Oil bound distemperover a coat of primer as per manufactured instructionscomplete all as specified and directed by Engr-in-charge. |
| 77 | M&L for complete removal of existing treatement and preparation of old plastered/concrete surfaces of walls/roof/ incl necessary scafolding by broomingdown, steel wire brushing, scrapping down, smoke soot, moulds,moss& efflorescent salts and applying two coats of Oil Bound Distemper over and including one coat of alkali resistant primer, complete, all as specified and as directed by engr-in-charge.Note-Primer shall be applied after complete removal to existing treatment from old painted plastered/concrete surface. Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. |
| 78 | M&L for complete removal of existing treatement and preparation of old/new plastered/concrete surfaces of wall/roof/ incl necessary scafolding by broomingdown, steel wire brushing, scrapping down, smoke soot, moulds,moss& efflorescent salts and applying three coats of white wash complete all as specified and directed by Engr-in-charge. |
| 79 | M & L for complete removal of existing treatement and preparation of old plastered/concrete surfaces of walls/roof/ incl necessary scafolding by brooming down, steel wire brushing, scrapping down, smoke soot, moulds,moss & efflorescent salts and Finishing walls with two caot of Acrylic Smooth exterior paint in camouflauge pattern of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed by Engr-in-charge. |
| 80 | Demolition of cement concrete (unreinforced) in ground floors andpavings n.exc 15cm thickness (below or above ground level)all as specified and directed (11.60+4.67) |
| 81 | M & L for cleaning of all loose dirt & dust ,removing of previous treatment from roof surface and applying roof treatment as under:- (a) 10 mm thick plastering in Cm (1:4) using 100 % coarse sand on roof/ parapet walls/ side walls with wpc @ 3% BY WEIGHT OF CEMENT (b) Applying coat of bituminoios primer @ 0.10 litre/ Sqm on prepared surfaces and allow to dry (c) Supply and laying of 3mm thick minimum polymeric water proofing membrance weighting not less than 3 kG/ Sqm black finish reinforcement with non woven polyster matt with help of torching with proplane or abutance gas using torch with minimum 75 mm side overlap and 100 mm end overlap as per manufacturar instruction. complete all as specified and directed. |
| 82 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base, bases of floor and roof complete all as specified and directed. |
| 83 | M&L for 75mm thick cement concrete Type C-2 ,1:3:6,( Using 40mm graded aggregate) as in plinth protection , subbase complete all as specified and directed by Engr-in-charge. (38+33) |
| 84 | M&L for hardcore (broken stone or boulders) of gauge n exc 63mm, deposited, spread and levelled in layers n exc. 15cm thic, watered and rammed to a true surface complete all as specified and directed. (5.30+2.50) |
| 85 | S&F aluminium anodised powder coated frame of standard section as directed or as perTD of CE(AF) shillong Zone for doors, windows, ventilators of any colour as approved with one or more rebates including joining cleat,etc for fixing etc. complete all as specified & as directed. |
| 86 | S&F aluminium anodised powder coated door shutters, with top rial of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc.complete, all as specified & directed. Note: all the aluminium shutterwill be as per TD drg no:- AF/TD/242/15shet no 1/3,2/3,3/3 of CE(AF) shillong Zone. |
| 87 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking downand refixing of shutter as in repairscomplete all as specified anddirected. |
| 88 | S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete,all as specified anddirected. |
| 89 | M&L for cement concrete 1:2:4 type B-2 (40 mm aggregate)in coloumns, pillar and posts etc complete all as specified and directed |
| 90 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed |
| 91 | Supply only mild steel galvanised chain link fencing 3.15 mm dia of mesh wire and mesh opening size 100x100mm with straining bolts, 10 mm dia round bars binding with 0.9mm dia MS binding wire, flat iron fillets (for securing wire mesh etc) binding and joining complete including necessary drilling, bolting or rivetting etc complete all as specified and as directed.Note: Flat iron, round bars, nut bolts and washers etc shall be measured and paid seperately |
| 92 | Supply only MS flat iron, round or square bars confirming to Grade E-165 (Fe-290) for fixing chain link wire fencing complete all as specified and directed |
| 93 | S&F mild steel work in angle iron in posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.;and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 94 | Supply only mild steel round bars of 10 mm dia and over confirming to Grade-165 (Fe-290) for fixing in chain link wire fencing complete all as specified and directed |
| 95 | S&F Mild steel screw bolts (machine made) withhexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cmlong and dia of neck 5mm to 10mm complete all as specified and directed |
| 96 | M&L for painting two coats with synthetic enamel paint over a coat of red oxide primer on new steel/iron surfaces of any description over 10 cm width or girth including prepartion of surfaces and priming with red oxide complete all as specified and directed by Engr-in-Charge |
| 97 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2 mm dia barbs at 75mm spacing and staining and fixing to any type of standards rails, staining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed.Note: Each line of horizontal/vertical/diagonal wire to be measured for the purpose of payment |
| 98 | M&L for prepartion of new/old undecorated plastered/concrete surface of wall/roof and applying two coat of weather proof acrylic emulsion paint (exterior grade) in camouflage pattern on wall, incl necessary scafolding over one coat of weather coat primer ((Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed |
| 99 | Returning filling in soft/loose soil in layers not exceeding 25cm thick, watering and well ramming complete all as specified and directed. (0.50+46.09) |
| 100 | Removal of surplus soil to a distance not exceeding 50 mtr away & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. (5.50+5.76+45.71) |
| 101 | M&L for rendering 15mm thick on PCC block masonary fair face or brick masonary surfaces or concrete surfaces in CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. (20+100) |
| 102 | S&F plates (plain or chequered) channels for ducts Fe-290 (Gde E 165) square cut or notched (ordinary and counter sun) forming holes, without any attachment complete all as specified and directed |
| 103 | M&L prepolished chequered cement concrete tiles with grey cement and pigment of size 30cmx30cmx 22 to 25mm thick set and jointed with neat cement slury over and including 15 mm bedding layer of cement sand mortar (1:6) and polished with grey cement complete all as specified and directed |
| 104 | M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channel, drain complete all as specified and directed |
| 105 | M&L for point wiring for light point with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in and incl PVC casing Caping of size not less than 25x12mm/32x12mm suitable as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round/square blocks at junctions etc screws, gutti/roul plugs PVC all as per site requirements including plastic terminal boxes for mounting of switches/sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm, cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black, Earth-Green complete all as specified and directed, (12+8) |
| 106 | All as per Item No 92 above but with socket outlet 5 Amps controlled by one switch on the same board complete all as specified and directed |
| 107 | All as per Item No 92 above but with one socket outlet 5 Amps controlled by one switch on independent board complete all as specified and directed |
| 108 | All as per Item No 92 above but with 4.0 sq mm for one 15 Amps socket outlet on independent bard and 2.5 sqmm PVC insulated multistranded copper conductor cable as continuous earth wire complete all as specified and directed |
| 109 | S&F switch piano type one way 5 amps 230 volts complete all as specified and directed. (12+8) |
| 110 | S&F switch socket combination outlet 5pin 5amps flush type complete all as specified and directed |
| 111 | S&F switch socket combination 2in 1, 3 pin, 6 and 16 Amp flush type universal 230 volts complete all as specified and directed by Engr-in-Charge |
| 112 | Supply and fixing ceiling rose surface bakelite 3 terminals complete all as specified and directed (12+8) |
| 113 | Supply and fixing of surface mounted batten type LED luminaries 20 W 230 V AC on wall by stainless steel screw, rawl plug etc & connecting upto ceiling rose with three core sheathed copper conductor cable (white/grey colour) of suitable size complete all as specified and directed |
| 114 | M&L for sub main wiring with two single core PVC insulated cable of size 2x4 Sqmm+1x4 sqmm earth wire multistranded copper conductor drawn in heavy duty PVC incl PVC casing & capping of size not less than 25x12mm/32x12mm dia with all fittings and continuous earth wire complete concealed with wall and making good disturbed surfaces of wall/floor etc complete all as specified and directed |
| 115 | Supply and fix sheet metal enclosure MCB SPN distribution board, 8 way, double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush type in wall/surfaces complete all as specified and directed |
| 116 | Supply and fixing SPN 32 Amp rating 240 V, 10 KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity I the MCB DB complete with connection testing and commissioningcomplete all as specified and directed |
| 117 | Supply and fixing SP 6 to 32 Amp rating 240 V, 0 KA, \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed |
| 118 | Supply and fix exhaust fan, steel body heavy duty AC single phase 230 V of size 300mm sweep heavy duty with copper winding complete including making hole in existing wall and finishing with cement ration 1:4 of 15 mm thick plaster work on brick surface/concrete surface/stone with louvers/flip cover of exhaust fan made with 0.5mm thick sheet in square/round complete all as specified and directed |
| 119 | M&L for earthing complete with copper earth plate electrode of size 600x600x3.15mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to 20x3mm copper strip as earth lead by means of nuts, bolts, check nuts, washers of galvanised iron s steel, protected by galvanised iron pipe 40mm bore (Medium grade) all as directed including cement concrte (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A1 cover sabof size 42x42x10 cm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necesary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion all complete as specified and directed. (copper strip upto 7.5 including testing consider in this item) |
| 120 | M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos, 8 mm dia 25 mm long hex head screw complete all as specified and directed |
| 121 | M&L for ccopper strip 20x3.15 mm with saddles and fixing screws etc for roof conductors and down conductors above ground complete all as specified and directed |
| 122 | M&L for cement concrete in foundations, filling and mass concrete type C2 1:3:6, 40mm graded aggregate all as specified and directed |
| 123 | M&L for sand cushioning for protection of LT underground cable with screen wash sand and punning to proper reqd cover all as specified and directed |
| 124 | M&L for brck protection with old size sub class \"B\" brick for PVCunder ground cable protection in trench with width equal to length of brick laid dry and flat joining each other with gap between adjacent brick not exceeding 10mm over LT under ground cable all as specified and directed |
| 125 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, round wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35.0 sqmm 3.5 core complete all as specified and directed |
| 126 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, round wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16.00 sqmm 4 core complete all as specified and directed |
| 127 | S&F on-load Manual change over switch (in sheet steel enclosure) 63 Amps 415 volts, 4 pole after disconnecting all electrical connection complete all as specified and directed |
| 128 | Supply and fix of MCCB TPN 4 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed |
| 129 | Supply and fix MCCB 63 Amps, 4 pole, 16 KA, 415 volts complete all as specified and directed |
| 130 | M&L steel tubular sewaged pole 9 mtr long complete with MS base plate, finial taper plug nut bolts, screws as specified type 410SP-31 as per relevant IS specification including two coat of aluminium paint over a coat of red oxide primer inclduing taking down unserviceable and removing from site complete all as directed by ENgr-in-Charge (earth work/excavation PCC shall be measured and paid seperately under relevant item of schedule |
| 131 | M&L for fixing the cable junction boxes of size 155x210x92 mm, with terminals for 10-16 sqmm, 4.0/3.5 C, 110 V cable, IP66/69, weather proof, outdoor installation type with threaded cable glands & pole mounting brackets, etc complete all as specified and directed. Make: Hensel/OBO |
| 132 | M&L 2.5 sqmm, 3 core black PVC insulated single solid aluminium conductor round service cable 1100V for connection from loop/junction box to street light/security complete all as specified and directed |
| 133 | M&L for tubes 15 mm bore light grade galvanised with all fittings laid in trenches/wall/pole through MS flat (25x3), nut, bolt & washers (where ever reqd) of proper sizes for protection cables complete all as specified and directed. Make: Nezone/Bansal/Jindal |
| 134 | M&L for hot dip galvanised (as per BS EN ISO 1461 1991) brackets of 40 mm dia (medium grade), 1.5 m long for fixing LED type street light luminaries, fixing it to pole through MS clamp, nut, bolt & washers incl taking down old one complete all as specified and directed. Make:NTL/Nezone/ Jindal/TataNote: Any welding works related to bracket should be carried out at the factory premises of the manufacturers. |
| 135 | Supply and fixing of LED street light fittings in aluminium PDC housing, toughened glass cover, individual LEDs ith secondary optics, covered with IP 66 protection with in built surge protection of minium 10 KV and repair/replacement warranty of minimum 3 years of capacity 60/65 Wcomplete all as specified and directed. Make: Havells/Wipro/Philips or equivalent make specified in CA |
| 136 | Supply, install, testing and commissioning outdoor type LT panel of suitable size, CPRI approved factory made totally enclosed dust and vermin proof, double steef shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door painted with powder coated paint and aluminium bus bar 150 amps suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC platform all around the panel board complete with the following items:-Incoming(a) MCCB, 4 pole, 100 A, 415 V 25 KA (I/C) with adjustable Thermal & Magnetic Release-01 Nos(b) Phase indicator lamps (RYB)-set of 3(c) Aluminium bus bar 4 strip(d) Internal wiring for panel incl insulators, sleeves etcOutgoing:-(A) MCCB, 4 pole, 100 A, 415 V 25 kA (O/G) with adjustable Thermal & Magnetic release-01 No |
