Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-01-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-02-2024 |
| 2 | 19-01-2024 | CORRIGENDUM TO GENERAL SUMMARY | Other | 30-01-2024 |
| 3 | 19-01-2024 | CORRIGENDUM TO SCHEDULE OF CREDIT | Other | 30-01-2024 |
| 4 | 19-01-2024 | CORRIGENDUM TO BOQ | BOQ | 30-01-2024 |
| 5 | 19-01-2024 | CORRIGENDUM TO CONTENTS PAGE | Other | 30-01-2024 |
| Sl. No. | Item Description |
| 1 | EXCAVATION & EARTHWORK |
| 2 | Excavation in trenchesnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed |
| 3 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed |
| 4 | Removing excavated materialsto a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed |
| 5 | B/R WORKS |
| 6 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed |
| 7 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed |
| 8 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering /wall cladding complete all as specified and as directed |
| 9 | Dismantling mild steel work or wraught iron of any description and in any position complete all as specified and as directed |
| 10 | Dismantling wall and ceilingboards (fibre, pulb, insulation, etc.) or insulation boards slabs/blankets of any thickness including cover fillets complete all as specified and as directed |
| 11 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed |
| 12 | Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces |
| 13 | Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces |
| 14 | Taking up or down steel water tubing and connections, 15mm bore from any location / position including sorting, stacking serviceable tubings for reuse and disposing off unserviceable tubings, etc. complete all as specified and as directed |
| 15 | Taking up or down steel water tubing and connections, 20mm bore from any location / position including sorting, stacking serviceable tubings for reuse and disposing off unserviceable tubings, etc. complete all as specified and as directed |
| 16 | Taking off existing bituminous felt in roofing including cement mortar bedding using suitable T&P and removing of spoil outside MD land complete all as specified and as directed |
| 17 | M&L for roughening of old concrete roof slabs by rubbing with wire brush, sweeping clean and washing down with water to remove all loose dust, dirt, etc. and brushing with neat cement slurry @3kg/sqm mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directedNote: WPC will be measured and paid separately under respective item herein |
| 18 | S&F in position mild steel sheet 1.0mm thick, eaves gutters, galvanised class 3, half round, 150mm dia with rounded edges complete all as specified and as directed |
| 19 | S&F 5mm thick plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 290W grade-E -165 complete all as specified and as directed |
| 20 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 10 to 15cm in length, dia of neck & shank 11 to 15mm complete all as specified and as directed |
| 21 | S&F in position steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer, etc. using ERW or induction butt welded tubes / SHS conforming to IS-1161-2014 / IS-4923-1997 grade St-210 complete all as specified and as directed |
| 22 | S&F bands, straps, hold fasts, wall ties, two way and three way straps, plate washers and similar articles of mild steel 25x5mm conforming to Fe-290 grade E-165 complete all as specified and as directed |
| 23 | M&L for mild steel TMT bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 24 | M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 25 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed |
| 26 | M&L for formwork to sides and soffits of floor or roof beam, beam haunching, girder, lintels, cantilever, shelves including supports, etc. for rough finished flat surfaces of concrete complete all as specified and as directed |
| 27 | Supply and lay aluminium dividing strips 38mm wide, 1.5mm thick inserted in position conforming to design and pattern (as approved) in floors complete all as specified and as directed |
| 28 | M&L for brickwork with sub-class \"B\" bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed |
| 29 | M&L for 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm gradedstone aggregates) in floors, levelling courses and similar works complete all as specified and as directed |
| 30 | M&L for plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregates) as in roof padding, roof kerb or similar works in required thickness to maintain slope on roofs, surfaces finished even and fair complete all as specified and as directed |
| 31 | M&L for plain cement concrete 1:2:4 M-15 (nominal mix) type B-2 (using 40mm graded stone aggregates) as in levelling courses, paving, etc. complete all as specified and as directed |
| 32 | M&L for plain cement concrete 1:2:4 (type B-2) using 40mm graded stone aggregate as in beds of drains, surface channels, etc. complete all as specified and as directed |
| 33 | M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in floors, plinth protection, pavings, etc. surface finished even and fair, laid in alternate bays/panels and joints filled with bituminous mix of 1 part bitumen and 3 part of sand complete all as specified and as directed |
| 34 | M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in foundation filling, mass concrete, complete all as specified and as directed |
| 35 | M&L RCC M 25 designmix as in columns, pillars, posts, etc complete all as specified and as directed |
| 36 | M&L RCC M 25 design mix as in bands, beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed |
| 37 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 38 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directedNote: Inner girth shall only be measured |
| 39 | M&L rendering 15mm thick, in cement mortar (1:4) on walls / concretesurfaces, etc. in two layers (10+5mm) finishing layer mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directedNote: WPC will be measured and paid separately under respective item herein |
| 40 | M&L rendering 15mm thick, in cement mortar (1:6) on walls / concretesurfaces, etc. finished even and fair without using extra cement complete all as specified and as directed |
| 41 | M&L rendering 10mm thick, in cement mortar (1:4) on walls / concretesurfaces, etc. finished even and fair without using extra cement complete all as specified and as directed |
| 42 | M&L rendering 10mm thick, in cement mortar (1:3) on celing / soffit surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed |
| 43 | M&L for 2mm thick in cement mortar (1:2), mixed with integral colour (tint as approved) for finishing of concrete floors, etc. finished even and fair without using extra cement complete all as specified and as directed |
| 44 | Supply only integral water proofing compound all as specified |
| 45 | S&F pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebates including hinges (100/50mm stainless steel), lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of aldrop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs, etc. complete all as specified and as directed |
| 46 | S&F steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast including suitable locking arrangements complete all as specified and as directed |
| 47 | S&F 30mm thick factory made plain framed paneled door shutter (two panels) 2nd class HW rail and style with lock rail and panels of 12mm thick ISI marked veeneered particle board with commercial veeneering on both faces, with size of rail and style shall be as per IS-1003 (Part-I) complete all as specified and as directed |
| 48 | S&F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.24(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed |
| 49 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed |
| 50 | S&F factory made 28 to 30mm thick single/double leaf solid PVC moulded door shutter with particle board core, stiles, with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm plain coloured PVC sheet on back face, supplying & fixing in frame at site as per requirement complete all as specified and as directed |
| 51 | S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with mild steel square tube and edges painted to match with printed sheet all as specified in clause 8B.3.1 and as per drawing shown in SSR Part-II (2010) complete all as specified and as directed |
| 52 | S&F 75mm MS butt hinges, medium weight, cold rolled complete all as specified and as directed |
| 53 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 54 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed |
| 55 | S&F 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed |
| 56 | S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed |
| 57 | S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed |
| 58 | S&F 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 59 | S&F 300mm, mild steel, ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed |
| 60 | S&F in repairs 20mm dia fancy type chromium coated (tint as approved) MS curtain / drapery rods, etc. of rod wall thickness 1mm (min), including pair of CP MS brackets, holders with funnel at ends complete all as specified and as directed |
| 61 | M&L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600x600mm with main runner 38x24mm and wall angle 24x24mm using 4mm thick high pressure non-asbestos fiber cement decorative board (E-Board Classic) in grid of GI system duly suspended from 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from roof with adjustment clips, providing positions for light fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detectors, etc., cnforming to IS 14862, the main runners duly secured to structural soffits by hanger @1220mm c/c (maximum) with the last hanger at the end of each main runner not interlocked between main runners @610mm c/c so as to form 600x600mm grid complete all as specified and as directed |
| 62 | M&L for preparation of masonry / concrete wall surfaces and applying two coats of oil bound distemper (tint as approved) over and including 1mm thick layer of wall care putty and one coat of alkali resistant walll primer with all necessary staging, scaffolding, etc. as required complete all as specified and as directed |
| 63 | M&L for preparation of old decorated plastered masonry / concrete wall surfaces and applying one coat of oil bound distemper (tint as approved) with all necessary staging, scaffolding, etc. as required complete all as specified and as directed |
| 64 | M&L preparation of old decorated plastered / unplastered wall surfaces including cornices, etc. and applying two coats of white wash complete all as specified and as directed |
| 65 | M&L preparation of old decorated plastered / unplastered ceiling / soffit surfaces including cornices, etc. and applying two coats of white wash complete all as specified and as directed |
| 66 | M&L for preparing of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of wall primer complete all as specified and as directed |
| 67 | M&L for preparing of old plastered or unplastered decorated surfaces of walls and applying one coat of cement based paint complete all as specified and as directed |
| 68 | M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed |
| 69 | M&L for preparing of old steel / metal surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint (tint as approved) complete all as specified and as directed |
| 70 | M&L for preparation of new wood or wood based surfaces of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (of approved tint) over one coat of pink primer complete all as specified as as directed |
| 71 | M&L for preparing of old wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint, tint as approved complete all as specified and as directed |
| 72 | M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.06sqm but not exceeding 0.11sqm each, 7 to 8mm thick of superior quality as in floors, etc. laid over 15mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed |
| 73 | M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality as in floors, etc. laid over 15mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed |
| 74 | M&L for glazed ceramic tiles, coloured, of size 300x250mm, 6 to 7mm thick, of superior quality as in vertical surfaces, skirting, dado, etc. laid over 10mm thick backing coat in CM (1:4) (rate shall be included) pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed |
| 75 | M&L for vitrified tiles, coloured, 10mm thick, joint free, edge cut, area of each tile exceeding 0.18sqm but not exceeding 0.36sqm, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in CM (1:6) (rate shall be included) complete all as specified and as directed |
| 76 | S&F pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 77 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 78 | S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed of the following bores: |
| 79 | 15mm bore |
| 80 | 20mm bore |
| 81 | S&F in repairs vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and \"P\" or \"S\" trap, connecting to flushing pipe and trap and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed |
| 82 | S&F in repairs vitreous China wash down water closet pan (Pedestal pattern), white, with \"P\" or \"S\" trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed |
| 83 | S&F in repairs vitreous China bowl urinal flat back half stall of size 590x390x375mm (minimum), white, with grating and union for discharge pipe, including providing fixing plugs, brackets, grating, union and connections to flushing pipe, bedding urinal against wall in CM 1:2, securing bowl with plugs and 60mm long brass screws, pointing around urinal bowl in white cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed |
| 84 | S&F in repairs wash hand basin, vitreous China, white, pedestal type, of size 510x420x780mm, approved design, with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed |
| 85 | S&F in repairs wash hand basin, pedestal type (full pedestal), vitreous China, white, with all connected accessories of size 560x430x195mm, of approved design complete all as specified and as directedMake: CNS-WHT-811 of Jaquar or equivalent model of Kohler, Plumber, Cera, Roca |
| 86 | S&F 10litres capacity PVC flushing tank, white / coloured, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing and taking down of old PVC flush tank and disposing off complete all as specified and as directed |
| 87 | S&F in repairs gun metal globe or gate valve, 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed including necessary cutting into existing pipe, threading, inserting new piece of GI pipe of existing size, breaking/cutting into cement concrete, masonry, etc. and making good the disturbed surfaces complete all as specified and as directed |
| 88 | S&F in repairs 15mm bib taps, chromium plated, cast copper alloy, long neck with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed |
| 89 | S&F in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstain heads, chromium plated, screwed down, high pressure, with or without lettered \"HOT\"/\"COLD\", with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed |
| 90 | S&F in repairs 15mm dia stop cocks / angle valves, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed |
| 91 | S&F in repairs 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass, minimum weight 40gms complete all as specified and as directed |
| 92 | S&F in repairs 600x450mm full sized bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 93 | S&F in repairs 20mm dia chromium plated tubular towel rail, D type, 600mm long (minimum weight 170gm) including suitable brackets complete all as specified and as directed |
| 94 | S&F in repairs toilet paper holder, box type, 175x170x92mm, vitreous China, white, of approved deisgn and finish and fixed with steel screws and wooden/rawl plugs complete all as specified and as directed |
| 95 | S&F in repairs soap dish 168x165x95mm, vitreous China, white, of approved deisgn and finish and fixed with steel screws and wooden/rawl plugs complete all as specified and as directed |
| 96 | S&F in repairs health faucet, 15mm bore, telephone type, with CP arms, swivel joints, flexible braided stainless steel pipe with 1.25m long stainless steel braided tube (minimum 1000mm long) and ABS wall hook of approved finish including making all necessary connections complete all as specified and as directedMake: Cat No. F-160027 of Hindware or equivalent model of Jaquar, Kohler, Plumber, Cera, Roca |
| 97 | S&F in repairs braided water connection pipe, steel armoured, for hot & cold water supply suitable for geysers, 15mm bore, minimum 600mm long, with connecting accessories and making all necessary connections complete all as specified and as directed |
| 98 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm wide, 600mm long, with chromium plated stainless steel bracket guard and railing of approved design complete all as specified and as directed |
| 99 | S&F in repairs 15mm PVC connections, 450mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed |
| 100 | S&F in repairs 15mm PVC connections, 600mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed |
| 101 | M&L for disconnecting PVC overhead water storage tanks, 250 to 500litres capacity, including staging (if required), at any position / location, setting aside or lowering (if required) and cleaning of internal surfaces of by scrubing the surfaces with the help of coir brush, jute cloth and flushing out all the accumulated mud / siltinside the tank, then applying two coats of lime wash on all internal surfaces like wall, ceiling, floor, etc. and writing tank number, capacity of tank, date of cleaning with white synthetic enamel paint over a black synthetic enamel paint base (of suitable dimensions) with size of letter 4\" height and refixing in position and connecting up complete all as specified and as directed |
| 102 | S&F in repairs PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber ring joints fixed on walls with suitable clamps, etc. complete all as specified and as directed |
| 103 | S&F in repairs PVC (SWR) pipes, 75mm bore, single socketed in any length with rubber ring joints fixed on walls with suitable clamps, etc. complete all as specified and as directed |
| 104 | S&F in repairs 110mm bore PVC (SWR) bend of any radius complete all as specified and as directed |
| 105 | S&F in repairs 110mm bore PVC (SWR) WC connector with lip ring including jointing with solvent cement complete all as specified and as directed |
| 106 | S&F in repairs 110mm bore PVC (SWR) reducers in any radius complete all as specified and as directed |
| 107 | S&F in repairs PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified as directed |
| 108 | S&F in repairs PVC(SWR) \"S\" trap, 110mm dia outlet, plain with grating including jointing with solvent cement complete all as specified as directed |
| 109 | S&F in repairs 75mm dia PVC (SWR) vent cowl complete all as specified and as directed |
| 110 | E/M WORKS |
| 111 | Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed |
| 112 | Taking down house service bracket of any size / shape from any location/position and disposing off complete all as specified and as directed |
| 113 | Taking down main switches, sheet metal enclosures, DBs by disconnecting and blanking supply mains from any location/position and disposing off complete all as specified and as directed |
| 114 | Taking down unserviceable ceiling fans, any sweep from any location/position and depositing in MES storeyard complete all as specified and as directedNote: Cost of loading, unloading, carting to MES store as required shall be included in quoted rate |
| 115 | Taking down unserviceable metal exhaust fans, any sweep from any location/position and depositing in MES storeyard complete all as specified and as directedNote: Cost of loading, unloading, carting to MES store as required shall be included in quoted rate |
| 116 | M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including cutting chases as required, provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following: |
| 117 | One light point controlled by one 5A one way switch |
| 118 | One ceiling fan / exhaust fan point controlled by one 5A one way switch |
| 119 | One switch socket outlet 3 pin 5A controlled by one switch on independent board |
| 120 | One switch socket outlet 3 pin 5A controlled by one switch on same board |
| 121 | M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including cutting chases, provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed |
| 122 | M&L for point wiring with 4sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including cutting chases, provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for AC / equipment controlled by one SP/SPN MCB independent, wiring from DB to swicth socket running independently with 3 wires for each point without tapping complete all as specified and as directed |
| 123 | M&L for point wiring with 1.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic PVC casing capping not less than 25mm wide and accessories flush on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, including cutting chases for sinking for box and making good to the surface to match the existing and terminal boxes complete all as specified and as directed for the following: |
| 124 | One light point controlled by one 5A one way switch |
| 125 | One ceiling fan / exhaust fan point controlled by one 5A one way switch |
| 126 | One switch socket outlet 3 pin 5A controlled by one switch on independent board |
| 127 | One switch socket outlet 3 pin 5A controlled by one switch on same board |
| 128 | S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed |
| 129 | S&F switch piano flush modular type, single pole, ISI marked, one way 6A, 1 module, 230V complete all as specified and as directed |
| 130 | S&F switch piano flush modular type, single pole, ISI marked, one way 16A, 1 module, 230V complete all as specified and as directed |
| 131 | S&F socket outlet, 2/3 pin, 6A modular type, ISI marked, combined 2 module, 230V complete all as specified and as directed |
| 132 | S&F socket combination outlet, 6 pin, 16A modular type, ISI marked, 3 module, 230V complete all as specified and as directed |
| 133 | S&F electronic fan regulator, modular type, stepped type (8 steps), 100W, 230V, 2 module, ISI marked duly connected up complete all as specified and as directed |
| 134 | S&F bell push modular type, single pole, ISI marked, one way 6A, 1 module, 230V complete all as specified and as directed |
| 135 | S&F in repairs bell buzzer, ding dong type, 230V, single pole, 50Hz, AC complete all as specified and as directed |
| 136 | S&F in repairs PVC / polycarbonate lamp holder, insulated body, bracket holder / angle holder with back plate 240V complete all as specified and as directed |
| 137 | S&Fin repairs modular metal flush box with white cover plate with frame ISI marked complete all as specified and as directed suitable of the following modules: |
| 138 | 1 module |
| 139 | 3 modules |
| 140 | 4 modules |
| 141 | 6 modules |
| 142 | 8 modules |
| 143 | S&F modular 1 module blank plate complete all as specified and as directed |
| 144 | S&F decorative bracket lamps LED 10W, white light, of approved design and type including taking down and disposing off old unserviceable fitting complete all as specified and as directed |
| 145 | S&F 10W, white light, LED lamp suitable for bracket fittings complete all as specified and as directed |
| 146 | S&F LED tube light fitting 1x20W, 220V, AC, decorative box type, with suitable driver, holder including 20W LED tube, all accessories prewired and connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to fitting and taking down and disposing off old fitting complete all as specified and as directed |
| 147 | S&F LED mirror light fitting, decorative box type, 10W with 10W lamp, driver holder and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed |
| 148 | S&F LED bulk head 10W with pressure die cast aluminium housing high efficient LEDs and enclosed with milky diffuser IP 66 protection, input voltage 90-300V, PF 0.95, CRI> 70, L 80 stranded luminaries with efficiency 100 lumen/Watt, with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable and taking down and disposing off old fitting complete all as specified and as directed |
| 149 | S&F building security light, LED luminaire 20W IP 66 with LED lamp, driver, etc. with all accessories pre-wired and connecting with 3 core flexible copper conductor cable drawn through PVC conduit of size 20mm and taking down and disposing off old fitting completeall as specified and as directed |
| 150 | S&F ceiling fan 1200mm sweep, 230V, minimum air delivery 210CFM with service value 6.00 BEE 5 star rated, with blades, down rods and accessories complete all as specified and as directed |
| 151 | S&F heavy duty, PVC body with PVC blades, legs, ISI marked energy efficient, 230V, 50Hz, 900RPM, exhaust fan, 250mm sweep with lauvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts complete all as specified and as directed |
| 152 | S&F heavy duty, PVC body with PVC blades, legs, ISI marked energy efficient, 230V, 50Hz, 900RPM, exhaust fan, 200mm sweep with lauvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts complete all as specified and as directed |
| 153 | S&F sheet metal enclosures for 8 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces complete all as specified and as directed |
| 154 | S&F sheet metal enclosures for 4 way MCB DB, 240V, TPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces complete all as specified and as directed |
| 155 | Taking down old unserviceable submain wiring of any type, any size, from any location or position and disposing off including making good the disturbed surfaces, etc. complete all as specified and as directed |
| 156 | M&L for submain wring using proper colour codingwith 2 runs of single core, PVC insulated,FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 6sqmm and 1 run of 6sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 20mm wide, heavy duty, ISI marked concealed in wall/ceiling/roof, etc. with all required accessories complete all as specified and as directedNotes: (i) 2 runs of 6sqmm main cable, 1 run of earth conductors and 1 run of PVC conduit shall be measured as one length(ii) Separate conduit shall be used for each sub-main wiring circuit irrespective of numbers of wire(iii) The minimum size of conduit shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of casing as per requirement at site |
| 157 | S&F MCB SP, 240V, 6 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed |
| 158 | S&F MCB SPN, 240V, 6 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed |
| 159 | S&F MCB TPN, 415V, 63A, 4P 10kA, 50Hz, B curve complete all as specified and as directed |
| 160 | M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directedNote: Only punned thickness of sand shall be considered for measurement purposes |
| 161 | Supply and laying burnt bricks of sub-class \"B\" designation 75 laid in trenches for cable protection complete all as specified and as directed |
| 162 | S&F in repairs steel water tubing, light grade, 40mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc. complete all as specified and as directed |
| 163 | Supply, laying, jointing, connecting and testing 4 core 16sqmm XLPE insulated PVC sheathed cable 1100V grade, screwed PVC bedded, armoured electric power cable, conforming to IS: 7098 (Part-I), heavy duty multi-stranded aluminium conductor laid in trenches / fixed on walls/poles, passing through pipes, etc. including connecting up to DBs, etc. with required lugs, end terminal / cable glands including taking out/down old unserviceable cable and disposing off complete all as specified and as directedNote: Excavation and earthwork will be measured and paid separately under respective item herein |
| 164 | M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 15mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications, taking down and disposing off old earthing complete all as specified and as directed |
| 165 | Notes for serial item No. 164: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included(ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item(iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
