|
| 1 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]In 5th Floor(vi) 19mm |
| 2 | In 3rd Floor(vi) 9 mm |
| 3 | Scantling upto 50mm wide and 12mm thick (chamfering or rounding) for ceiling/partition battens including fitting, fixing in position with washers, coach screws etc. complete.:(a) Ordinary teakIn 5th Floor |
| 4 | Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type |
| 5 | Door stopper(Brass) |
| 6 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:(v) 100 x 63 x 3.2mm. |
| 7 | Supplying \"Godrej\" mortice lock chromium plated with keys 6 levers including fitting & fixing complete. |
| 8 | Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)(B) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 1990.(ii) Both side decorative laminate (a) Exterior grade 12mm thick In 3rd Floor |
| 9 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In Charge. (Payment will be made on finished length of the work).In 5th FloorA) In 10-12 Micron thickness Annodizing filmI) Natural whitek) Movable door shutteri) Door frame. (Top & sides) |
| 10 | ii) ShutterTop rail |
| 11 | Bottom rail. |
| 12 | Lock rail |
| 13 | Door Vertical |
| 14 | Glazing cleap |
| 15 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:(B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge3rd Floor |
| 16 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge(a) 200 mm long |
| 17 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987vi) 6mm thick coloured / tinted / smoke glass |
| 18 | Supplying, Fitting & fixing different factory made Metal Craft Sheet (excluding cost of metal crafting) incluing cost of powder coating (for M.S, Aluminium plate) & finished metal sheet with all fitting accessories complete in all respect as per diection ofEngineer-in-Charge.A) Stainless Steel Plate i) 2.0mm thick |
| 19 | B) Brass Plate i) 2.0mm thick |
| 20 | Carpenter (Head) for repairing of damaged almirah |
| 21 | Supply and pasting of Veneer with polish finish complete (including cost of Veneer, glue, polish and labour charges only) as per direction of Engineer-in-Charge.5th Floora) On new wood work |
| 22 | Supply, laying Dupoint make Corian over ply surface as required on Table Top/Facia etc. with glue by cutting into proper shape and sizes jointing along the side in place by proper fixing arrangement and finally moulding/polishing/boffing by hand grinder machine as per approved colour / Design and direction of Engineer - in - Charge |
| 23 | Add 18% extra in respect of GST on all items, on Rs. 1450953.00 |
| 24 | Add 1% extra in respect of Labour Welfare Cess on Rs.1712125.00 |
