Rajasthan State Road Development And Construction Corporation Limited has published Tender For Providing, Fixing And Placing Furniture At 2Nd Floor In Capacity Building And It Training Center And Help Desk At Kar Bhawan, Jaipur. Submission Date for this Tender is 18-01-2024. Book Supply Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | EXECUTIVE TABLE WITH CREDENZA SIZE: TABLE:2550 x 900 x 750 MM(L x W x H) LEFT CREDENZA:1500 x 600 x 750 MM(L x W x H) RIGHT CREDENZA:1200 x 450 x 600 MM(L x W x H) BACK UNIT: 1800 x 450 x 750 MM(L x W x H) The table top of(w x h)2550 x 900mm, would be made out of 50mm (25mm+25mm) thick in batten type using MDF board having density 600-800kg/ m3. One of the rectangular top is of (w x d) 1950 x 900mm and the remaining is of (w x d) 600 x 900 mm. Both the tops of table are laminated with 0.2mm thick membrane foil. The edges of the table are in quarter round shape. Reverse side of top is laminated in matching color. The top is rested on one Right side credenza & two pillars with modesty panel. The modesty panel of (w x h) 1850 x 725mm would be made out of 18mm thick MDF board having density 600-800kg/m3. The modesty panel is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. This type of design made with CNC router is possible only on MDF board. The pillars are also grooved with CNC router for design purpose. The bottom of table is provided with molding in membrane finish. Left credenza of size (w x d x h) 1500 x 600 x 750mm is provided with table. The top of credenzawould be made out of 50mm (25mm +25mm) thick in batten type using MDF board having density 600-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick MDF having density 600-800 kg/m3, laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 1.3mm thick PVC edge banding in matching color. The back side of the side unit would be made out of 18mm thick MDF board having density 600-800kg/ m3. It is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. All shelves would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick PVC edge banding. All drawers are mounted on steel telescopic channel. All drawers are provided with handles. It has space for CPU storage.Keyboard tray. Right credenza of size (w x d x h) 900 x 450 x 600mm is provided with table. The top of credenza would be made out of 50mm(25mm +25mm) thick MDF board having density 600-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 1.3mm thick PVC edge banding in matching color. The back side of the side unit would be made out of 18mm thick MDF board having density 600-800kg/ m3. It is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the sliding shutter are in flat shape. Reverse side of shutter is laminated in matching color. All shelves would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 1.3mm thick PVC edge banding. Back Unit of size (w x d x h) 1800 x 450 x 750mm is provided with table. The top of back unit would be made out of 50mm(25mm +25mm) thick MDF board having density 600-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 1.3mm thick PVC edge banding in matching color. The back side of the side unit would be made out of 18mm thick MDF board having density 600-800kg/ m3. Shutters of side unit would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. All shelves would be made out of 18mm thick MDF board having density 600-800kg/m3, laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 1.3mm thick PVC edge banding. All drawers are mounted on steel telescopic channel. All drawers are provided with handles. Glass Top : Providing Glass Top on main table &left side unit made out with 12mm thick float clear glass is provided with all edges should be diamond polished. Footrest: All structure made out of 18mm thick MDFboard with four side PVC edge banding finish. |
| 2 | Office Table with side unit & back unit Size- 1800x900x750 mm) MAIN TABLE & TOP SURFACE: The main table of size 1800 x 900 x 750mm with the top surface made out of 25mm thick particle board with half round/duck nose shape post forming on front and the rear side and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and balancing laminate of matching colour on the reverse side. Table have drawer unit of size 625 x 450 x 572mm (H X W X D) made out of 18mm thick pre-laminated board, having three number of drawer units, the two top units of 6” depth each and the bottom drawer of 15” depth.The front shutters matching with top surface in quarter round post formed shutters and mounted on steel telescopic channels including necessary hard-wares, handle locks etc. The side unit of size 900 x 450 x 625mm:- top surface made out of 25mm thick particle board post formed and laminated with balancing laminate on reverse side 1.3mm thick matching colour PVC Edge banding and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and balancing laminate of matching colour on the reverse side. Oneshelves & one openable shutter with lock. BackUnit Size- (1800x450x1800 mm) The back unittop surface at 750 mm level made out of 25mm thick particle board post formed half roud finish back side laminated with white balancing laminate on reverse side. All flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Back unit should be 18 mm thick pre laminated partical board provided two openable shutter with single shelves with soft close hinges & two sliding shutters with single shelves inbuilt including necessary hard-wares, handle, All Single having individual locks etc. Above 750mm height two nos tower unit will be made in 18 mm prelaminated partical board duly seal with 1.3 mm PVC edge bend. |
| 3 | Office Table with side unit TABLE : 1800 X 900 X 750 SIDE UNIT:900X 450 X 625 Main Table & Top Surface: The main table of size 1800 x 900 x 750mm with the top surface made out of 25mm thick particle board with half round/duck nose shape post forming on front and the rear side and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and balancing laminate of matching colour on the reverse side. Side unit: The side unit of size 900 x 450 x 625mmtop surface made out of 25mm thick particle board post formed and laminated with balancing laminate on reverse side 1.3mm thick matching colour PVC Edge banding and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and balancing laminate of matching colour on the reverse side. One shelves & one openable shutter with lock. Table both side supoorted on M.S. leg duly powder coated finish as per refrence Image. |
| 4 | Office Table with side unit Size 1500 x 750 x 750 mm Table Top: The table top of size 1500 x 750mm would be made out of 25mm thick prelaminated particle board finish all four sides edge banded with 1.3mm thick matching colour PVC Edge banding finish . All flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Front Cover:The front cover of the table is made of 18mm thick particle board board matching with the color of the tabletop. The top is supported by pedestal unit on both side made of 18mm thick prelaminated particle board with 1.3mm thickmatching colour PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Pedestal Unit: Left side drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick pre-laminated particle board, having one openable shutter with single shelve with soft close hinges.The front shutters matching with top surface finish including necessary hard-wares, handle locks etc. Right side drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick pre-laminated particle board, having two drawer & one shutter units, the one top units of 6” depth and the rest is bottom shutter.The front shutters matching with top surface finish and mounted on Telescopic channels including necessary hard-wares, handle locks etc. |
| 5 | BackRack Size- (1800x450x750 mm) The back unittop surface made out of 25mm thick particle board post formed half roud finish back side laminated with white balancing laminate on reverse side. All flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Back unit should be provided two openable shutter with single shelves with soft close hinges & two sliding shutters with single shelves inbuilt including necessary hard-wares, handle, All Single having individual locks etc. |
| 6 | Side Rack Size- 1050x450x750 mm Side rack structure is made out with 18mm thick Prelaminated particle board with 1.3mm thick PVC edge banding of matching color There is a 50mm skirting provided in the bottom area.The top of the unit is made of 25mm thick particleboard duly post formed having half round shape on the front edge and rest of the sides edge banded with 1.3mm thick PVC Edge Banding of matching color. The unit is duly covered with 3 nos. of openableshutters with adjustable shelves with soft close hinges& 3 nos. drawers running with Telescopic chanel made out with 18mm particleboard with post formed finish and quarter round edges fitted with soft close hinges, handles, Each shutter having individual lock and all other hardware/accessories as per design. |
| 7 | wooden almirah size(900x 450 x 1800 mm) Supply of almirah size 750 x 450 x 1800 Almirah over all structure made of 18mm thick prelaminated particale boardhaving 4 no. of internal shelves which makes total 5 no. of campartments with 2 openable shutters fixed with the soft close hinges , all the edges of almirah covered with 1.3mm thick edgebandingand 2" skirting at the bottom of the almirah shall be given. The almirah also having 2 no of handle and locking system, as per sample approved by the client and engineer in charge. |
| 8 | File Rack size : 1200 x 450 x 700 mm All rack made of 18mm thick prelaminated particle board with 1.3mm thickmatching colour PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Design as per refrence Image. |
| 9 | Fourshutter steel book case with glass door size : 914 x 320 x 1742 mm 4 Door Book Case shall have the configuration of 914mm(W) x 320mm(D) x 1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA.Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). |
| 10 | Steel almirah with glass door size : 900 x 480 x 1950 mm Supply of Glass door almirah size 900 x 480 x 1950 , the iron structure shall be powder coatedin 20-22 guage and almirah shall have the 4 no. of shelf made in iron finished with powder coated makeing 5 compartments having double openable shutters in front with fixed glass and SS handles and lockeing system. As per sample approved by the client and engineer in charge. |
| 11 | Officer chair with punch back Supply of High Back executive chair with silver koyal arms and steel base with 5 wheel costers. Seat and back made with 12mm thick hot press ply structure covred with 45+25mm thick (two layer)and 32 kg density foam in back and45+25+15mm thick(3 layer) and 32kg density foam in seat with leaterate upholestry. The chair having torison bar mechanism with height adjustment upto100mm. As per sample and design approvred by client and engineer in charge. |
| 12 | Visiter Chair Visitor Chair: The cushioned seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. Size of back (W)-48.5cm, (H)- 62.0cm & size of seat (W)-51.0cm x (D)-52.5cm. The sled base leg frame welded assembly made from MS ERW round tube of 25mm with 2mm thick with base plate for seat fixing. Visitor Chair frame is chrome coated. |
| 13 | Visiter Chair Supply of visitors chair, the chair base and overall chair made of 25mm dia ss crome steel finish single mouled round pipe with wooden handel scrweed with the pipe. Chair seat structure shall be made with 12mm thick hot pressed ply covered with 40mm thick foam and as per required tepestery and horizontal pipe shall be given at the bottom or below of the seat to support the seat structure and pipe shall be well velded with the chair structure. The chair back shall be net backfixed with chair structure. As per sample approved by the client and engineer in charge. |
| 14 | Officer Revolving Chairs Supplying ofhigh back revolving chair, The cushionedseatassemblyshallconsistsofinsertmouldedpolyurethanefoam(density35kg/cum, thickness 30mm) upholstered with foam laminated mesh fabric(220 GSM ). The insert moulded foam is assembeledoveraloadbearingplasticseatcover.Thebackshallmadeupoftwopieceinjection mouldedframe.Theinnerframeshallbeupholsteredwithmeshfabricandmountedonthemain assembly.Sizeofbackshallbe(W)-48.5cm,(H)-62.0cm&sizeofseatshallbe(W)-51.0cmx(D)- 52.5cm.ArmrestAdjustable.Themechanismofchairshallhave following features:360 degree revolving type,center tilt mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back it canbeadjustedupto4.5+/-0.5cmup-downandhasregularadjustmentof30degree+/-2.The pneumatic height adjustment have an adjustment stroke of 10.0 cm to 15.0 cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type and injection molded in black polypropylene .The pedestal is injection molded in black 30% glass filled Nylon. A 10.5 mm dia forged bright zine plated M.S. caster pin pressfitted into each prong for holding the castors. The pedestal shall be 700 mm pitchcentre- dia. (750 mm with castors).The twin wheel casters are made of nylon . Overall dimensions of Chair shall be, Width of Chair- 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. As per sample approvd by the client and engineer-in-charge. |
| 15 | Staff Revolving Chairs Supplying ofmid backrevolving chair, The cushionedseatassemblyshallconsistsofdoble ply medium back system with PP fix type arms and chair also have loadbearingplasticseatcover.Thebackshallmadeupofdoble ply frame system cover with 32kg density and 40-50mm thick foam and 50mm thick foam with 32kg desity at the seam used and covered with required tepestery. Themechanismofchairshallhave following features:360 degree revolving type. The chair base made of Metal SS crome with 5 wheels. As per sample approved by client and engineer in charge. |
| 16 | TV Console size : 1800 x 450 x 750mm (L X W X H) Top panelmade upof 25 mmthick three layer pre laminate particle board all flat edge duly sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Rest all structure 18 mm thickthreelayer prelaminateparticleboard .Edgesealedwith1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Console have 4 Drawer with full extension telescopic ball bearing slide channels&2 openable shutter with auto close hinges. The entire console is complete in all respects and made as per specification and as directed by engineer-in-charge. |
| 17 | Sofa 3 Seater :-SOFAS 3 SEATER : Size of 3 seater sofa shall be 1950 (L) 870 mm (W) 760 (H) .The frame material to be pinewood+ thickness of plywood used to be 12mm. The seat foam & back foam density to be 40kg/m3 upholstered with leatherette/fabric of approved color and make. Sofa to be covered with good quality leatherette. The material for leg to be teak wood and should be polish. The leg should be fixed with wood screw provided on frame in addition to M-8 / T-nut."Design will be as per reference image. |
| 18 | Sofa 1 Seater :-Size of 1 seater sofa shall be 970 (L) 870 mm (W) 760 (H) .The frame material to be pinewood+ thickness of plywood used to be 12mm. The seat foam & back foam density to be 40kg/m3 upholstered with leatherette/fabric of approved color and make. Sofa to be covered with good quality leatherette. The material for legto be teak wood and should be polish. The leg should be fixed with wood screw provided on frame in addition to M-8 / T-nut. Design will be as per reference image. |
| 19 | 3 seater sofa Supply ofthree seater sofa, size 1880 x 785 x730mm, sofa structure duly made with SS 304 rectangular frame 50 x 25mm, sofa internal structure duly made with mango/pine wood and fix at steel structure with the help of self tapping steel screw, sofa having 40 & 32 medium density foam and all foam duly covered with PU leathrite tapestry, sofa having in bottom four nos. of nylon steps for anti skid on floor. Complete in all respect as per design and approved by client and Engineer in charge. Design will be as per reference image. |
| 20 | 3 SEATER MS chair Supply of 3 seater weating are sofa size 1800x 760x 790mm (LxWxH)Cross beam shall be made up of black powder coated rectangular M.S.ERW tube having 8 ± 0.03 cm x 4 ± 0.03 cm x 0.2 ± 0.016 cm size. Leg and armrest shall be chrome plated made of cold rolled steelwith 0.12 ± 0.013 cm thinkness. Seat back shell shall be 1.6 mm th.powder-coated perforated shell made from cold rolled M.S. sheet 0.16 ± 0.013 em thickness. TheSide Bar shall be made of Chrome plated solid steel 3 ± 0.03 cm x 1.2 ± 0.3 cm (DIN174)with fluting and plastic inserts.The Shell shall be assembledon the Cross Beam with help of M8 Bolts (Per Seat- 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam). Complete in all respect as per design and approved by client and Engineer in charge. |
| 21 | CENTRETABLE size : 1180 x 600 x 450mm The dimension of the table shall be (L) 1180 mm x (W) 600 mm x (H) 450mm. 10mm thick clear toughened glass insert on top and material of shelf shall be of glass of 8 mm thick black tinted toughened glass UV glued. The table support to be made of teak wood of size- 55x22mm .Center Table Leg to be made of teak wood of size -50X22mm.All Wooden surface should be PU polished. |
| 22 | Center Table size : 1200 x 600 x 450mm (L x W x H) Table top: Table top & lower part made out with 18mm thick prelam particle boardwith four side edge band finish.The whole table is supported on four legand equal size which are made out of 18mm thick prelaminated particle board with PVC edge banding of matching color. Table having 8mm thick tinted glass. The entire table is complete in all respects and made as per specification and as directed by engineer-in-charge. |
| 23 | Storage Drawer The three drawer pedestal unit size: 725(H)x380(W)x450(D) shall made out of 18mm thick pre- laminatedboard,havingthreenumberofdrawerunits,thetwotopunitsof6”deptheachandthe bottom drawer of 15” depth.The front shutters matching with top surface in quarter round post forming on the right and left side and all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Drawersareprovidedwithfull extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system including necessary hard-wares, handle locks etc. The entire table is complete in all respects and made as per specification and as directed by engineer-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
