Tender For Provide Services And Facilities To The Collectorate And Its Subordinate Offices, mumbai-Maharashtra

Tender For Provide Services And Facilities To The Collectorate And Its Subordinate Offices-2 Item No. 1: Single Faced Fixed Unit For Compactor 2I5ommh X L83ommw X 457Mind Providing And Fixing Single Faced Fixed Unit For Compactor 2L5ommh X 1830Mmw X 457Mmd - Baseframe : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Cany A U.D.L. Of 70 Kgs. Vertical Panel:Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 2Oswg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralised Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism Driving Mechanism Will Be Provided Externally Supported On Special Grade Antifriction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish Powder Coating ( 8 Tanks Process With 70 Microns ) . 3 Item No. 2 : Single Faced Mobile Unit For Compactor 25Ommh X 183Ommw X 457Mmd Providing And Fixing Single Faced Mobile Unit For Compactor 2150Mmh X L83ommw X 457Mrnd - Base Frajvie : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Ra [ Ls : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Pane ) , Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kgs. Vertical Panel: Vertical Panel Consists Of The Front, Centre &Rear Panel Shall Be Made Out Of 20Swg Thick C.Rc.A. Prime Quality Mild Steel &Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thickc. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking System Will Be Provided With Individual Rack Locking As Well As Centralised Lockingarrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortlessmovement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish Powder Coating ( 8 Tanks Process With 70 Microns ) . 4 Item No. 3: Double Faced Mobile Unit For Compactor 2150Mm11 X L83ommw X 900Mmd Providing And Fixing Double Faced Mobile Unit For Compactor 2L5ommhx I83ommwx900mmd -Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Superstructure: Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry Au.D.L. Of 70 Kgs. Vertical Panel: Vertical Panel Consists Of The Front, Centre &Rear Panel Shall Be Made Out Of 2Oswg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking System Will Be Provided With Individual Rack Locking As Well As Centralised Locking Arrangement On The Last Unit When All Units Are Brought Together Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Overthe Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish Powder Coating ( 8 Tanks Process With 70 Microns ) . 5 Item No. 4 : Single Faced Fixed Unit For Compactor 2L5ommh X 2745Mmw X 457Mmd. Providing And Fixing Single Facedfixed Unit For Compactor 2I5ommh X 2745Mmw X 457Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Superstructure: Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D, L. Of 70 Kgs. Vertical Panel: Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 2Oswg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking System Will Be Provided With Individual Rack Locking As Well As Centralised Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock Whenoperated Gets Locked With The Floor & Does Not Allow Access To The Units. Driveechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Drivingwheel Fully Powder Coated Three Pronged Drive Wheel For Better Torque Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish : Powder Coating ( 8 Tanks Process With 70 Microns ) . 6 Item No. 5 : Single Faced Mobile Unit For Compactor 2L5ommh X 2745Mmw X 457Nimd. Providing And Fixing Single Faced Mobile Unit For Compactor 2L5ommh X 2745Mmw X 457Mmd - Base Fra1vie : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Superstructure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kgs. Vertical Panel:Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 2Oswg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism.Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralised Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti- Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel Foreasy Identification & Retrieval. Final Finish Powder Coating ( 8 Tanks Process With 70 Microns ) . 7 Item No. 6 : Double Faced Mobile Unit For Compactor 2L5ommh X 2745Mmw X 900Mmd. Providing And Fixing Double Faced Mobile Unit For Compactor 2L5ommh X 2745Mmw X 900Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure: Super Structure Of The Mobilestorage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kgs. Vertical Panel:Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 2Oswg Thick C:R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition: The Entrepartition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 225Wg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralised Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powdercoated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval, Final Finish Powder Coating ( 8 Tanks Process With 70 Microns ) 8 Item No, 7 Providing & Fixing In Position Guide Channels Consisting Of J Section 2 Mm Rhk Hr Sheet & 25 Mm Square Bright Bar Both Connected By Screws, Prior To The Embedding Of The Guide .

INR 31300 /-

INR 313000.0 /-

INR 3.13 Crore /-