Military Engineer Services-MES has published Tender For Addition / Alteration Including Repair To Jcos / Ors Md Accn ( Old Map ) Bldg No P-25, P-26, P-27, P-32, P-33 & P-71 At Dholewal Mil Complex Under Ge Ludhiana.. Submission Date for this Tender is 07-02-2024. Building Work Tenders in ludhiana Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-02-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified & as directed by Engineer-in- charge. |
| 2 | Material and labour50 mm thickPCC 1:4:8 typeD-2 (with using40mm graded stone aggregate)as in sub base of floor complete all as specified & as directed by Engineer-in- charge. |
| 3 | Material and labour 40mm thick cemnt concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in floorings , finished even and smooth without using extra cement complete all as specified & as directed by Engineer-in- charge. |
| 4 | Material and labour 50mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement complete all as specified & as directed by Engineer-in- charge. |
| 5 | Supply and fixing 38mm width of strip glass dividing strips, 3mm thick and inserted in position to confirm to design complete all as specified & as directed by Engineer-in- charge. |
| 6 | Material and labourEndura chequered cement concrete tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15 mm thick screed in cement mortar 1:6 complete all as specified & as directed by Engineer-in- charge. |
| 7 | Material and labour Chequered cement concrete tiles 30cm x30cm x 25mm thick set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment over 15mm thick screed bed or bedding in cement mortar 1:6 in floors complete all as specified & as directed by Engineer-in- charge. |
| 8 | Dismantling brick tiles or terracing tiles, single layers including any treatment on roof complete all as specified & as directed by Engineer-in- charge. |
| 9 | Demolition of mud in roofs, any thickness, incl plastering and leeping (whether full thickness removed or only part thereof) complete all as specified & as directed by Engineer-in- charge. |
| 10 | Material and labour forPlain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate average thickness 50mm as in roof padding incl mixing water proofing compoundcomplete all as specified and as directed. Note. water proofing liquid shall be measured and paid seperately) complete all as specified & as directed by Engineer-in- charge. |
| 11 | Material and labour rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & as directed by Engineer-in- charge.. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule). |
| 12 | Supply only integral water proofing compound. |
| 13 | Applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm incl cleaning surfaces complete all as specified & as directed by Engineer-in- charge. |
| 14 | Material and labour providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqmby forced application complete all as specified & as directed by Engineer-in- charge. |
| 15 | Removing material of mud phuska exc. 250 m but n exc. 500 m and depositing where directed complete all as specified & as directed by Engineer-in- charge. |
| 16 | Material and labour40 mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement complete all as specified & as directed by Engineer-in- charge. |
| 17 | -ditto- as Item No 16 but except tiles after clening and removing old mortar from bricks complete all as specified & as directed by Engineer-in- charge. |
| 18 | Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbishcomplete all as specified & as directed by Engineer-in- charge. |
| 19 | Material and labour PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregates) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & as directed by Engineer-in- charge. |
| 20 | Demolition of reinforcement cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work (reinforcement cut as reqd to facilitate demolition) complete all as specified & as directed by Engineer-in- charge. |
| 21 | Reinforced Cement Concrete type B1 1:1.5:3 (M20) (nominal mix ) (using 20 mm gradedstone aggregate) in slab suppurted on wall complete all as specified & as directed by Engineer-in- charge. |
| 22 | Reinforced Cement Concrete type B1 1:1.5:3 (M20) (nominal mix ) (using 20 mm gradedstone aggregate) in Chajjas etc complete all as specified & as directed by Engineer-in- charge. |
| 23 | Use and waste rough finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified & as directed by Engineer-in- charge. |
| 24 | Use and waste rough finished Form work to edges of concrete floor and roofs and similar work exceeding 5 Cm but not exceeding 10 Cm wide complete all as specified & as directed by Engineer-in- charge. |
| 25 | Material and labour for machine cut kota stone slab flooring 20-25 mm thick laid on screed bed 15 mm thick in cm (1:6) and jointed with greay cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified & as directed by Engineer-in- charge. |
| 26 | Ditto as item No 25 above but in one piece as in riser ,treads of of stair,skirting / dado laid over 10mm thick cement screed in CM 1:4 complete all as specified & as directed by Engineer-in- charge. |
| 27 | Dismantling of stone slabs and tiles of anydescription or thickness in floors, approns and laid bedded and pointed in any mortar etc complete all as specified & as directed by Engineer-in- charge. |
| 28 | Material and labour, Granite slab 20 mm thick (table rubbed and polished) as inin steps, jambs,pillars, window-cill, cooking platform over and including 15mm thick bedding layer in cement mortar (1:4)inand pointed with white or colour cement(1:2) using marble dust with admixture to match the shade of granite complete all as specified & as directed by Engineer-in- charge. |
| 29 | Dismantling floor, hearth or wall tilesincluding cement mortar bedding(but not backing) andremoving serviceable tiles to stores and rubbish off the premises complete all as specified & as directed by Engineer-in- charge. |
| 30 | Material and labour Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neatcement slurry and pointed in white or coloured cementwith pigment to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified & as directed by Engineer-in- charge. |
| 31 | -ditto- as per item no 30 but in shirting/doddo laid over 10mm thick cement screed in cm 1:4 complete all as specified & as directed by Engineer-in- charge. |
| 32 | Material and labour Glazed ceramic coloured/ printed tiles (450X350mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neatcement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4 complete all as specified & as directed by Engineer-in- charge. |
| 33 | Taking down cement plaster in any heightof any descriptionon brick or concrete surfaces etc including scaffolding, racking out joints, hacking for key, scrubbing down with water etc. complete all as specified & as directed by Engineer-in- charge. |
| 34 | Material and labour 12mm thick rendering on brick work or concrete surfacesin cement mortar 1:6finsihed the surfaces even and smooth without using extra cement complete all as specified & as directed by Engineer-in- charge. |
| 35 | Material and labour rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling, complete all as specified & as directed by Engineer-in- charge. |
| 36 | Material and labour 15mm thick rendering on brick work or concrete surfacesin cement mortar 1:4finsihed the surfaces fair and even complete all as specified & as directed by Engineer-in- charge. |
| 37 | Material and labour on newly plastered surface of walls applyingtwo coats of oil bound distemper over a one coat of primer over 3mm wall care putty complete all as specified & as directed by Engineer-in- charge. |
| 38 | Material and labour three coats white wash on wall surfaces inclduing prepration of newly plasteredand undecorated surfaces complete all as specified & as directed by Engineer-in- charge. |
| 39 | Material and labour three coats white wash on ceiling surfaces inclduing prepration of newly plasteredand undecorated surfaces complete all as specified & as directed by Engineer-in- charge. |
| 40 | Material and labour two coats of cement base paint including preparation of newly plastered surfaces on walls, complete all as specified & as directed by Engineer-in- charge. |
| 41 | Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each complete all as specified & as directed by Engineer-in- charge. |
| 42 | Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & as directed by Engineer-in- charge. |
| 43 | Taking down shuttersof any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and refixing in the same opening after easing and minor adjustment complete all as specified & as directed by Engineer-in- charge. |
| 44 | Taking down Shutters of any description area exc 1 Sqm but n.exc. 2 Sqm Each complete all as specified & as directed by Engineer-in- charge. |
| 45 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing complete all as specified & as directed by Engineer-in- charge. |
| 46 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified & as directed by Engineer-in- charge. |
| 47 | Supply and fixing pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified & as directed by Engineer-in- charge. |
| 48 | Supply and fixing pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified & as directed by Engineer-in- charge. |
| 49 | Providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats & hold fastcomplete all as specified & as directed by Engineer-in- charge. |
| 50 | Supply and fixing 2nd class(factory made )35mm thick hard wood,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, and fitted to chowkatscomplete all as specified. |
| 51 | Supply and fixing 35mm thick 2nd lass hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I complete all as specified & as directed by Engineer-in- charge. |
| 52 | Material and labour two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer including prepration of newly untreated surfacescomplete all as specified & as directed by Engineer-in- charge. |
| 53 | Supply and fixing steel window & ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles ofz section 100mm long (c) Stopper - 01 No per leaf (d)Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f)Fabrication & fixing arrangement .Note : Glass, guard bar and painting shall be measured and paid separately under appropriate item etccomplete all as specified & as directed by Engineer-in- charge. |
| 54 | Ditto as item No 53 but fixing with wire mesh, (wire mesh and painting shall be paid seperately). |
| 55 | Supply and fixing mild steel framed work such as grills, framed guard bars, grating and likeconfirming to FE 410 or FE 310 complete all as specified & as directed by Engineer-in- charge. |
| 56 | Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil puttyin squares n,exc 0.5 Sqm,each pane complete all as specified & as directed by Engineer-in- charge. |
| 57 | Supply and fixing Sheet 3.0 mm thick frosted glass, squares nexc 0.5 sq. m each pane complete all as specified & as directed by Engineer-in- charge. |
| 58 | Supply and fixing for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed by Engineer-in- charge. |
| 59 | Supply and fixing 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & as directed by Engineer-in- charge. |
| 60 | Supply and fixing inAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified & as directed by Engineer-in- charge. |
| 61 | Supply and fixing 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified & as directed by Engineer-in- charge. |
| 62 | Supply and fixing in Aluminium handles, cast type, anodised 150mm long complete all as specified & as directed by Engineer-in- charge. |
| 63 | Supply and fixingFloor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified & as directed by Engineer-in- charge. |
| 64 | Supply and fixing in repairs 300mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate, fixing with screw or welding to chowkhats complete all as specified & as directed by Engineer-in- charge. |
| 65 | Dismantling brick work or stone/boulder masonary, built in cement mortar or cement lime mortrar incl all qupins, arches, pillars, etc,but incl. ashlar fencings, dressed stone works and precast concrete articles complete all as specified & as directed by Engineer-in- charge. |
| 66 | Material and labour Brick work with sub class B brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified & as directed by Engineer-in- charge. |
| 67 | ditto- item no 66 but except bricks |
| 68 | Taking down eaves gutter and rain water pipes (of any size and patern), incl all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accesaries) complete all as specified & as directed by Engineer-in- charge. |
| 69 | Supply and fixing 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floors complete all as specified & as directed by Engineer-in- charge. |
| 70 | Supply and fixing 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints fixed to wall complete all as specified & as directed by Engineer-in- charge. |
| 71 | Supply and fixing 75 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & as directed by Engineer-in- charge. |
| 72 | Supply and fixing 75 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified & as directed by Engineer-in- charge. |
| 73 | Supply and fixing PVC (SWR) 75mm dia bend of any radius complete all as specified & as directed by Engineer-in- charge. |
| 74 | Supply and fixing PVC (SWR) 110mm dia bend of any radius complete all as specified & as directed by Engineer-in- charge. |
| 75 | Supply and fixing 75mm SWR vent cowls complete all as specified & as directed by Engineer-in- charge. |
| 76 | Supply and fixing 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & as directed by Engineer-in- charge. |
| 77 | Supply and fixing PVC P-Traps for water closets of 110mm bore complete all as specified & as directed by Engineer-in- charge. |
| 78 | Framedworkasincooler stand doorsor gates of angle or other sectiondrilled for fixingand hanging or sliding with and including either hooks andhingesorsteelhangingdoor fittings (exclusive of steel sheetingorother covering,running rails and guides) and hanging;alsofasteningandfixing complete (Fe410-W Gde E-250 Quality-A) complete all as specified & as directed by Engineer-in- charge. |
| 79 | Material and labour Prelaminated particle board thickness 18/19mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & as directed by Engineer-in- charge. |
| 80 | Material and labourExtra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified & as directed by Engineer-in- charge. |
| 81 | Supply and fixing Aluminium handles, cast type, anodised 100mm long complete all as specified & as directed by Engineer-in- charge. |
| 82 | Supply and fixing Continuous (piano) hinges 30mm width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified & as directed by Engineer-in- charge. |
| 83 | Supply and fixingPVC magnet cather fixed with screws to wooden framescomplete all as specified & as directed by Engineer-in- charge. |
| 84 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified & as directed by Engineer-in- charge. |
| 85 | Dittoas per item no 84 but 20 mm bore. |
| 86 | Supply and fixing 15mm GI tubes, medicum grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & as directed by Engineer-in- charge. |
| 87 | -ditto item no 86 but 20mm bore. |
| 88 | Refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore complete all as specified & as directed by Engineer-in- charge. |
| 89 | -ditto all as per item No 88but 20mm bore. |
| 90 | Supply and fixing in repairPVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets including flush pipe 32 mm, fixed in repairs complete all as specified & as directed by Engineer-in- charge. |
| 91 | Supply and fixing in repair vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets &incl 32mm bore waste coupling (incl waste pipe)fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed complete all as specified & as directed by Engineer-in- charge. |
| 92 | Supply and fixing in repair viterous china squartting pan orrisa pattern , size 580x 440mm white, interged foot rest including connection to trap and to flush pipe, anti syphonic pipe etc complete making good to floor complete all as specified & as directed by Engineer-in- charge. |
| 93 | Supply and fixing Soap dish, any type, fixed to plugs with chromium plated brass screws in repair complete all as specified & as directed by Engineer-in- charge. |
| 94 | S & F in repair fancy type pillar taps 15 mm bore cast copper alloy with capstan heads chromium plated ,scrwed down high pressure, with or without lettered hot or coldwith long scrwed shanks and fly nuts-nuts scrwed for iron pipe and fixed in repair complete all as specified & as directed by Engineer-in- charge. |
| 95 | S & F in repairfancy type bib tap of 15 mm borecast copper alloychromium platedwith crutch or butterfly handle ,screwed down, scrwed for iron pipe or for brass ferrule and fixed in repair complete all as specified & as directed by Engineer-in- charge. |
| 96 | Supply and fixing in repair 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs complete all as specified & as directed by Engineer-in- charge. |
| 97 | Supply and fixing in repair 15mm stop cock cast copper alloy with crutch or butterfly handle, screwed down screwedfor iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type), complete all as specified & as directed by Engineer-in- charge. |
| 98 | Supply and fixing in repair chlorium platedshower roses with or without swivel join ts 125 mm size incl fixing to steel pipe all as per directedcomplete all as specified & as directed by Engineer-in- charge. |
| 99 | Supply and fixing in repairs brass chromium plated tubular towel rail, 20mm dia D-type, 60cm long between flange complete all as specified & as directed by Engineer-in- charge. |
| 100 | Supply and fixing in repair PVC bathroom cabinet mirror size 350mm x 450mm complete all as specified & as directed by Engineer-in- charge. |
| 101 | Supply and fixing in repairPVC connections 15mm size with PTMT nuts of lenth 600 mm complete all as specified & as directed by Engineer-in- charge. |
| 102 | Supply & fixing Glass self assembly with stainless steel frame Corner glass shelf etc complete all as specified & as directed by Engineer-in- charge. |
| 103 | Dismantling water tank & removing to store of capacity exc 250 and n exc 500 Ltr complete all as specified & as directed by Engineer-in- charge. |
| 104 | Supply and fixing in repairs Rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1 complete all as specified & as directed by Engineer-in- charge. |
| 105 | Supply and fixing 20mm bore Brass ball valve with polythene float and fly nut fixed in repairs complete all as specified & as directed by Engineer-in- charge. |
| 106 | Supply and fixing stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc fixed in repairs complete all as specified & as directed by Engineer-in- charge. |
| 107 | Supply and fixing in repair 25 mm dia fancy type mild steel, chromium plated curtain rod fixed in position with fixing brackets , stops, rollers, etc. complete all as specified & as directed by Engineer-in- charge. |
| 108 | Material and labour One coats white wash on wall undecorated surfaces including prepration of old plastered surfaces complete all as specified & as directed by Engineer-in- charge. |
| 109 | Material and labour One coats white wash on ceiling undecorated surfaces including prepration surface, plastered or un plastered of old undecorated surfaces complete all as specified & as directed by Engineer-in- charge. |
| 110 | Material and labour for complete removal of existing treatment and applying two coat of oil bound distemper on walls over 3mm thick wall care putty including preparation of surfaces of walls complete all as specified & as directed by Engineer-in- charge. |
| 111 | Material and labour one coat of cement base paint to old surfaces of walls after prepration complete all as specified & as directed by Engineer-in- charge. |
| 112 | Material and labour one coats of synthetic enamel painting on wooden surfaces overincluding prepration of old surfaces complete all as specified & as directed by Engineer-in- charge. |
| 113 | Supply and fixing in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified & as directed by Engineer-in- charge. |
| 114 | Supply and fixing in repairs stainless steel sink without drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete all as specified & as directed by Engineer-in- charge. |
| 115 | Supply and fixing in repairs stainless steel kitchen plate rack fixed in wall having overall size 600mm X 750mmX 250mm complete all as specified & as directed by Engineer-in- charge. |
| 116 | Demolition of cement concrete (unreinforced) in sunken portionexcceding 15cm thickness in any description complete all as specified & as directed by Engineer-in- charge. |
| 117 | Material and labour PCC 1:5:10 type E-2 using 40mm graded brick aggregate as filling under (sunken slab) floors complete all as specified & as directed by Engineer-in- charge. |
| 118 | Material and labour for applying two coats of Shalimar supercrete / Nito Bond water proofing coating on the entire surfaces of sunken portioncomplete all as specified & as directed by Engineer-in- charge. |
| 119 | Material and labour for 15mm thick screed bed in cement mortar 1:3 admixed with integrd water proofing compound complete all as specified & as directed by Engineer-in- charge. |
| 120 | Material and labour cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in sides ofruonded or chamfered on edges of sunken floor complete all as specified & as directed by Engineer-in- charge. |
| 121 | Excavation in trenches n. exc 1.5 metre wide for foundations etc. and not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified & as directed by Engineer-in- charge. |
| 122 | Demolition and breaking up 150mm bore drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified & as directed by Engineer-in- charge. |
| 123 | Material and labour, cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to 150mm boredrain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified & as directed by Engineer-in- charge. |
| 124 | Material and labour, 150mm bore reinforced concrete pipe class NP3 laid in trenches includingjointing & testingcomplete with collars complete all as specified & as directed by Engineer-in- charge. |
| 125 | Material and labour, for Cutting into existing manholes for connecting new drains pipe of 100mm dia , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified & as directed by Engineer-in- charge. |
| 126 | Returning filling in soil including spreading, levelling, watering and well ramming in layers notexceeding 25cm thick complete all as specified & as directed by Engineer-in- charge. |
| 127 | Removal of excavated surplus soil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & as directed by Engineer-in- charge. |
| 128 | Excavation in post holes ( or similar holes) each not exceeding 0.50 cubic meter in any typeof soil , getting out, retruning filling in watering and ramming earthor broken rubble mixed with earth around inlayers not exceeding 25 cm and removing surplus soil to a dsitance n.exc 50 mtr and making good surface complete all as specified & as directed by Engineer-in- charge. |
| 129 | Material and labour PCC ( 1:3:6) type C-2 using 40mm graded stone aggreage in fdn filling amd mass concrete complete all as specified & as directed by Engineer-in- charge. |
| 130 | Supply and fixing post and strut in fencing including cutting tops to shape as directed drilling holes notching for wire flat iron fillet ( for securing wire mesh) in incl all necessary drilling bolting and rivetting conforming to Fe-290Gd-165 complete all as specified & as directed by Engineer-in- charge. |
| 131 | Supply and fixing mild steel screw bolt ( maching made) with hexagonal or square head at one end and screwedthe other with washer n.exc 5 cm long dia bolt 5 to 10mm complete all as specified & as directed by Engineer-in- charge... |
| 132 | Supply only Chain link MS galvnised fencing , any size or type, complete all as specified & as directed by Engineer-in- charge. |
| 133 | Labour for Fixing only chain link fencing including line wires, any mesh, size and type to any type ofstandards,rails,strainingbolts,etc. including provission of binding wire,complete all as specified & as directed by Engineer-in- charge. |
| 134 | Material and labour for two coats of synthetic enamel paint on new surface of steel and iron surfaces any description over 10 cmwidth or girth over a coat of red oxide primer including prepration of surface complete all as specified & as directed by Engineer-in- charge. |
| 135 | Material and labour for TMTbars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoopingfor columns , hooking ends and binding with and including mild steel wire as in straightening bars for chain link fencing ( annelaed) not less than 0.9 mmd ia or securing with clips complete all as specified & as directed by Engineer-in- charge. |
| 136 | Taking down carefully the point wiring (light, Fan, socket or power) complete, (incl fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. complete all as specified and as directed by Engineer-in-Charge. |
| 137 | Taking down Ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custodyfor reuse at site andmaking good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.. |
| 138 | Refixingonly ceilingfan and connecting up including provision sutiable of new down rod for ceiling fans,of cable from celling rose/ connector to fan incl painting complete all as specified and as directed by Engineer-in-Charge. |
| 139 | Taking down Exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custodyfor reuse at site andmaking good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 140 | Refixingonly exhaustfan and connecting up including provision of cable from celling rose/ connector to fan incl painting complete all as specified and as directed by Engineer-in-Charge. |
| 141 | Material and labourfor point wiring with PVC insulated and PVC sheathed cable with copper conductor single core size of 1.5 sqmm in and including heavy duty PVC conduit ISI marked in concealed in walls, ceiling etc, for one light / fan / bell point controlled by one switch including replacing exisiting switch boards/boxes with new MS concealed terminal boxes with 3mm plastic laminated sheet top cover,earth contiunity wire PVC insulated sheathed 1.5 sqmm solid copper conductor cable connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for one light/fan/call bell point controlled by one, one way switch |
| 142 | Ditto all as per Item No 141 but for oneswitch socket outlet point 5 Amps on independent board |
| 143 | Ditto all as per Item No 141 but for one 3 Pin socket outlet , 5 Amps on the same board with other switch |
| 144 | Ditto all as per Item No 141 but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size |
| 145 | Ditto all as per Item No 141 but for but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 146 | Supply and fix LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20,higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and as directed by Engineer-in-Charge. |
| 147 | Supply and fix LED tube light fittings 600 mm, 10W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and as directed by Engineer-in-Charge. |
| 148 | Supply and fixing in repair energy saving bulk head luminaries with opal diffuse LED 10 watt 6000 K power factor more than 0.90 IP-65 class-I protection with high efficiency Led electronic driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply complete prewired products must be made in India only connection and testing complete all as specified and as directed by Engineer-in-Charge. |
| 149 | M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc complete all as specified and as directed by Engineer-in-Charge. |
| 150 | Supply and fixSPN MCB DB 8 wayswith 200 Amps rated bus bar 240Volt, Double door type complete all as specified and as directed by Engineer-in-Charge. |
| 151 | Supply and fixing MCB SPN 32 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA. complete all as specified and as directed by Engineer-in-Charge. |
| 152 | Supply and fixing MCB SP 6-32Amps240 V, C- curve, 50 Hz, breking capacity-10 kA . complete all as specified and as directed by Engineer-in-Charge. |
| 153 | Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed by Engineer-in-Charge. |
| 154 | Supply and fixing Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed by Engineer-in-Charge. |
| 155 | Supply and fixing Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed by Engineer-in-Charge. |
| 156 | Supply and fixing Switch Modular 6A single pole, two way, 1 module complete all as specified and as directed by Engineer-in-Charge. |
| 157 | Supply and fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 158 | Supply and fixing Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 159 | Supply and fixing Modular White cover plate with frame,8 module complete all as specified and as directed by Engineer-in-Charge. |
| 160 | Supply and fixing Modular White cover plate with frame,6 module complete all as specified and as directed by Engineer-in-Charge. |
| 161 | Supply and fixing Modular White cover plate with frame,3 module complete all as specified and as directed by Engineer-in-Charge. |
| 162 | Supply and fixing Modular White cover plate with frame,1 module complete all as specified and as directed by Engineer-in-Charge. |
| 163 | Supply and fixing Modular Metal flush box 8 module complete all as specified and as directed by Engineer-in-Charge. |
| 164 | Supply and fixing Modular Metal flush box 6 module complete all as specified and as directed by Engineer-in-Charge. |
| 165 | Supply and fixing Modular Metal flush box 3 module complete all as specified and as directed by Engineer-in-Charge. |
| 166 | Supply and fixing Modular Metal flush box 1 module complete all as specified and as directed by Engineer-in-Charge. |
| 167 | Supply and fixing Modular bell push single pole , AC, 230 Volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 168 | Supply and fixing Calling bell, AC, 230 Volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 169 | Supply and fix fan step regulator, 120W 1 module complete all as specified and as directed by Engineer-in-Charge. |
| 170 | Material and labour Earthing complete with galvanised steel earth plate electrode60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner complete all as specified and as directed by Engineer-in-Charge. |
| 171 | Taking down ofany size of bldy security light fittings complete all as specified and as directed by Engineer-in-Charge. |
| 172 | Supply and fixingbldg security light fitting LED 30/35 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. , IP66 with high power LED lampcomplete all as specified and as directed by Engineer-in-Charge. |
| 173 | Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and as directed by Engineer-in-Charge |
| 174 | Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 5 cm thick after laying of cable in trenchescomplete all as specified and as directed by Engineer-in-Charge. Notes : (i) Excavation and earth work to be measuredand paid separately). (ii) Thickness of 18 cms after punning shall be considered for payment. |
| 175 | Material and labour for old size sub class "B" bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified and as directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
