Tender For Nrs Medical College & Hospital- Academy Building - Emergent Repair & Painting Of Telemedicine Roomat 1St. Floor., Kolkata-West Bengal

Tender For Nrs Medical College & Hospital- Academy Building - Emergent Repair & Painting Of Telemedicine Roomat 1St. Floor.- 1 Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. . 2 Applying epoxy based reactive joining agent for joining the old concrete withfresh concrete to be ….etc 3 (a) Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with ….etc 4 Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed ….etc 5 a) 20 mm thick 6 Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering …..etc 7 (ii) With 1:4 cement mortar . 8 (b) 15 mm. thick plaster.(Add. above ground floor - 1st. floor) 9 (ii) With 1:4 cement mortar . 10 (c)10 mm. thick plaster.(Add. above ground floor - 1st. floor) 11 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). 12 (d) Sal : Local. 13 Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber ….etc 14 (a) 35 mm thick shutters (single leaf) 15 supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar , end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction . ( cost of concrete will be paid separately). 16 (a) 40mm x 6mm, 250mm Length . 17 Iron butt hinges of approved qualityfitted and fixed with steel screws, with ISI mark. 18 (vii) 100 mm x 58 mm x 1.90 mm. 19 (i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete :. 20 (b) Medium (I.S.I. size 2). 21 Anodise aluminium barred/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws:. 22 (iv) 150 mm long x 10 mm dia. bolt. 23 Anodise aluminium Aldrop/Slidingbolts of approvedquality manufactured form extruded section conforming to I.S. specifictation (I.S.2681/66) fitted and fixed complete. 24 (i) 250 mm x 16 mm dia. bolt . 25 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:. 26 (a) With continuousplate base (hexagonal/round rod). 27 (vi) 150 mm grip x 10mm dia rod. 28 (b) Rendring the surface of walls and ceilingwith white cement based wall putty of approved make and brand (15mm thick). 29 Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturers specification)including cleaning and smoothning of surface.Two Coats 30 Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top,bottom and ….etc 31 a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90sqm 32 Supplying fitting & fixing in position 9 mm thick Heavy Duty Cement board - Type-A (High Pressure steam cured, tested asper AS-1530 part 3 & BS-476 …..etc 33 Supplying bubble free float glass of approved make and brand. Conforming to IS: 2835-1987. 34 (iii) 5 mm thick clear glass. 35 B) Supplying & laying of approved make and brand of scratch proof, flexible & homogeneous P.V.C. Vinyle flooring conforming to IS:3462 - 1982 in required finish, fixed with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge. 36 (ii) 1.5 mm thick (with stud / checkered) 37 Supplying, fitting and fixing PVC pipes of approved make ofof Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es …etc 38 For Exposed Work PVC Pipes. 39 20 mm. 40 For Exposed Work PVC Pipes. 41 40 mm. 42 Supplying, fitting and fixing bib cock or stop cock. 43 PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm 44 Supplying, fitting and fixing shower of approved brand and make. 45 PTMT overhead shower (prayag or equivalent ) 46 75 mm round . 47 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings(tested to 21 kg per sq.cm.). (Note: Item (vii),(viii) and (ix) to be done as per specific direction of the Engineer-in-charge). 48 20 mm. 49 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. 50 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. ….etc 51 550 mm x 400 mm size. 52 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved makecomplete in position with necessary bolts, nuts etc. 53 With P trap. 54 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws supplied, fitted and fixed complete. 55 E.W.C. . 56 Plastic (hallow type) white. 57 Supplying, fitting and fixing towel rail with two brackets. 58 Aluminium . 59 25 mm dia. and 600 mm long. 60 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. in cluding using of approved putty etc. on the surface , if necessary. 61 (a) On timber or plastered surface:. 62 (2)With other than hi gloss of approved quality. 63 (iv) Two coats (with any shade except white).

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	08-01-2024	1st Corrigendum	Other	22-01-2024

Refer document

INR 3673.0 /-

INR 1.83 Lakhs /-