Military Engineer Services-MES has published Tender For Repair Replacement Of Granite Works Flooring Dado Ss Railing Acrylic Polycarbonate Sheet Works Toughened Glass And Connected Work Under Age B R I Of Ge South Pune.. Submission Date for this Tender is 01-02-2024. Shed Construction Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-02-2024 |
| Sl. No. | Item Description |
| 1 | Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc. 500m complete all as directed by Engr-in-Charge |
| 2 | Demolition of plain cement concrete in any position from roof slab etc and removing the demolished materials & rubbish off the premises to a distance exc. 500m complete all as directed by Engr-in-Charge |
| 3 | M & L Water proofing treatment to RCC roof slab, walls, chhajja etc, shall be carried out as specified below and as directed by Engineer-in-Charge with and including the following stages:- (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces by using ready mix plaster. (b) Preparing the plastered surfaces of roof slab, walls, chhajja etc, by brooming with broom sweeping and make these free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/sqm of area. (c) M&L for Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method as specified & directed by Engr-in-Charge and on completion carrying out test by flooding water for 24 hrs for leakage & seepages. Ifany leakage & seepages observed the it shall be rectifying by the contract at his own coat and entire satisfaction of Engr-in-charge. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge. |
| 4 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 5 | M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles / cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :-The rate is inclusive of replacement of if any defective fittings / fixtures of any type / material elbows, bend, tee, reducer single "Y", double "Y" with cleaning eye and concealed piece of pipe below floor as well asbetween wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved) |
| 6 | S&F12mm thick toughened glass as in partition including with stainless steel fixing arrangements (Make-Jaquar) complete all as specified and directed by Engr-in-charge |
| 7 | S&F 12mm thick plywood, grade BWR, type BB, commercial faces, fixed with screws to timber frame work, complete all as specified and directed. |
| 8 | Material & Labour for providing and fixing stainless steel, Grade 304 as inrailing made of hollow tubes, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, kerb, bed plates, and similar works including weathering and throating including necessary form work etc., complete all as specified and directed. |
| 10 | M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protectionfinishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection complete all as specified and as directed. |
| 11 | M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in stone kerb with rounded top throating including necessary form work etc., complete all as specified and directed. |
| 12 | M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed blocks for embedding hold fasts complete all as specified and directed. |
| 13 | Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed. |
| 14 | Demolition of stone slab & tiles of any description or thickness infloor, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 15 | M&L for 25 mm thick PCC 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed. |
| 16 | M&L formatt finished, coloured ceramic tiles 7 to 8 mm thick 400 x 400mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thickscreed bed in CM 1:6 etc as in flooring, complete all as specified and directed. |
| 17 | M&L for hand cut kota stone slab as in flooring 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and mirror polishing, laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Note:- The size of kota stone slab shall not be less than 550mmx550mm (cut size except the location where balanced). |
| 18 | M&L for hand cut kota stone slab as in skirting / dado 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and mirror polishing, laid over and including 10mm thick rendering in cement mortar 1:4 and triangular filleting on top in CM 1:4, complete all as specified and as directed. |
| 19 | M&L for coloured glazed ceramic tiles of 600x300x7mm thick size as in skirting /dado, laid and jointed in neat cement slurry and pointed in coloured cement to match complete laid over and including 10mm thick rendering as in backing coat in CM 1:4 including triangular filleting on top in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for Vitrified colouredtiles10 mm thick (square / rectangular) polished area of each tiles exceeding 0.36 Sqm but not exc. 1.20 Sqm in floors, set an jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thickscreedbed in CM 1:6, complete all as specified and directed. |
| 21 | M & L for granite ( of any type ) work ( table rubbed and polished ) 16 to 18 mm thick as in steps, jambs, pillars, window cill, cooking platform and flooring set in CM 1:4 including pointing in white cement 1:2 using marble dust without mixture of pigment to match with shed of granite, laid over and including 15 mm thick screed bed of CM 1:4, complete all as specified and directed. |
| 22 | M&L for machine cut cudappah stone slab 20 to 25 mm thick as on cooking platform, set, jointed & pointed in grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing and polishing etc. laid over and including 15 mm thick screed bed of CM 1:4, complete all as specified and directed. |
| 23 | Rounding to edges of stone slab one edge, such as insteps, cooking platform and other similar situations, complete all as specified & directed. |
| 24 | M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, builtin CM 1:6 complete, including demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. |
| 25 | Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water, complete all as specified and directed. |
| 26 | M&L for rendering (as subsequent coat) 10mm thickin CM 1:6 by using ready mix plaster over dubbed out surfaces, finished the surfaces even & smooth with sagol finish, complete all as specified and directed. |
| 27 | M&L for rendering 15mm thickin CM 1:4by using ready mix plaster duly mixed with WPC as per manufacturers instruction, on brick / concrete surface, sponge finish, complete all as specified and directed. Note :- WPC shall be measured and paid separately. |
| 28 | Supply only integral water proofing compound, complete all as specified and directed. |
| 29 | M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemperover a coat of alkali resistant primer, complete all as specified and directed. |
| 30 | Removing of existing water tank of capacity 500, 1000 or 2000 Ltr setting aside (or lowering if required) for repair, cleaning etc and reconnecting & refixing in position after carrying out necessary roof treatment including necessary fittings and GI Pipes if required, complete all as specified and directed. NOTE : Necessary by pass arrangements for water supply is to be done by the contractor till completion of roof work at his own cost. |
| 31 | M & L for 4mm thick Asbestos cement sheets as in ceiling fixed with and including aluminium grid frame for ceiling with using 36.5mm x 23.5mm x 1.5mm thick main tee 23.5mm x 23.5mm x 1.28mm cross tee and 25mm x25mm x1.50mm angle fixed to perimeter of wall for false ceiling including necessary, supporting hanger with 2.00mm dia Gl wire and J bolts washer nuts for securing frame work to ceiling suspended at 120cm center to center both way of grid shall be 605mm x 605mm etc complete all as specified and directed. |
| 32 | Removing demolished materials including loading, unloading and stacking at the destination to a distance n.exc. 5 KM of outside of MD land, complete all as specified and directed. |
| 33 | Dismantling of asbestos cement (corrugated, semicorrugated etc.) sheets as in roof covering, including wind tie etc, complete all as specified and directed. |
| 34 | S & F 6 mm thick Asbestos cement , corrugated or semicorrugated sheetsin roof, walls etc fixed with L or J type hooks as in patches, complete all as specified and directed. |
| 35 | All as per item no.34 but fixing only, complete all as specified and directed. |
| 36 | M&L for asbestos cement two piece adjustable serrated ridge, 6mm thick, fixed with"J" or "L" type hook or cranked hook bolts, complete all as specified and directed. |
| 37 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / trenches / floor, complete all as specified and directed. |
| 38 | Dismantling of existing SWR pipe of 110mm dia and Re-fixingthe same to walls / trenches / floor including fitting & fixtures (If any required), complete all as specified and directed. |
| 39 | S & F 110mm dia., PVC (SWR) bends any radius, complete all as specified and directed. |
| 40 | Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 41 | Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 42 | Taking down shutters of any description exc. 1 sqm but not exc. 2 sq m each, complete all as specified and directed. |
| 43 | Taking down shutters of any description exc. 2 sqm each, complete all as specified and directed. |
| 44 | M&L for taking down shutters of steel window of any type by means of gas cutter complete all as specified and directed. |
| 45 | S & FSolid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge |
| 46 | S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drawing given SSR Part-II2020 Refer item No. 8080 as specified and directed by Engr-in-charge. |
| 47 | M&L for Gypsum ceiling board for ceilingprepainted, perforated finish, 600 x 600 x 8 to 9 mm thick in size, of approved brand/make, laid over and including grid work of size 595 x 595mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. suspension wires spaced at 1200 mm on main runners including making niches for fans / light, including dismantling of old unserviceable ceilings complete all as specified and directed. |
| 48 | S&F aluminium powder coatedthree track sliding window with two or more shutters with & including4 mm thick tinted glass, one shutter of stainless steel mosquito proofing with good qualitybearing,handle, lock etc using PVC beadingetc using following sections of `Jindal Aluminum Ltd " or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved. fixing to stone masonary walls with & including Ist class hard wood Teak plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes etc, complete all as specified and directed:- (a) Frame bottom 20620 (b) Frame top& side 20681 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side ) for 20606 shutters, (e) Handle (side) for 20606 Shutters |
| 49 | All as item no.48 but with provision of opening of AC, complete all as specified and directed. |
| 50 | S&Faluminium powder coated single leaf door on pivots alongwith hydraulic door closer, door lock, handles, 5mm thickglass panel etc. complete, fixed with rubber beading and glazing clips and by using following sections of `Jindal Aluminum Ltd " or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved complete all as specified and directed by Engineer-in-Charge:- (a) Rectangular tube 14005 (b) Shutter vertical 19503(c) Shutter top rail 19503 (d) Shutter Middle rail 060 (e) Shutter Bottom rail 19511(f)Glazing clips 19352 |
| 51 | S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd " or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with 12 mm thick both side prelaminated particleboard interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & includingIst class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes etc, complete all as specified and directed:- (a)SP – 20048 (b)DP -20047(c)Glazing clips- 19352 |
| 52 | M&L for Coloured chequerred cement concrete glazed tiles glossy finished of size 305x305x25mm thick in floor, confirming to IS-1237 (2006), laid and jointed in neat cement slurry and pointed in grey cement and pigment laid over and including 20 mm thick screed bed in CM (1:6)complete all as specified and as directed. |
| 53 | M&L for cloured, glossy finish, machine pressed precast concrete interlocking paver block tilesof M-30 grade, 60 mm thickof any shape and size confirming to IS 15658-2006 as in floor / pavement laid over and including 75 mm thick stone dust cushioning, laid dry to the profile over rammed earth complete all as specified and dircetd. |
| 54 | S & F 125 mm X 60 mm sizepressed steel frames made out of 1.25mm thick mild steel sheets for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes with and incluidng filled with the hollow portion of door frame & making goodin PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 55 | S & F 105 mm X 60 mm sizepressed steel frames made out of 1.25mm thick mild steel sheets for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes with and incluidng filled with the hollow portion of door frame & making goodin PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 56 | M&L for IInd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 57 | S&F 35mm thick flush shutters, solid core contruction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 58 | S & F IInd class hard wood 30mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc. (without sash bar) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 59 | S&F MS work as in guard bars,using with round or square bars & flat iron etc incl necessary drilling, welding etc complete & simillar articles confirming to Fe-290 grade E-165, complete all as specified and directed. |
| 60 | M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with andincluding 1mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture instructions at both side and 3mm thick 1st Class HW (TW) beading all around the edges complete all as specified and directed by Engr-in-Charge |
| 61 | M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 62 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 63 | S & F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18mm in repairs etc complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F butt hinges of cold rolled mild steel,medium weight,100mm size fixed with welding with existing MS door frame, complete all as specified and directed. |
| 65 | S & F aluminum anodized barrel tower bolt of extruded section 200mm sizeetc, complete all as specified and directed. |
| 66 | S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed. |
| 67 | S & F 150 mm extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. |
| 68 | S & F 0.56 mm thick aluminium sheeting fixed to door with chromium plated screw @ 200 mm c/c complete all as specified as directed. |
| 69 | S&F floor door stopper, over all length of cover plate 150 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in door, complete all as specified and directed. |
| 70 | M&L for applying two coats cement base paint (snowcem) on walls surfaces, including preparation of surface of walls, complete all as specified and directed. |
| 71 | S&F19mm thick commercial plywood Conforming to IS-12823, Gde-I, quality, extrior grade, commercial typeas in Kitchen Cabinet etc, fixed with screwwith andincluding 0.9mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture instructions at both side complete all as specified and directed by Engr-in-Charge . |
| 72 | S & F plain fillet of 1st class hard wood (teak) square, rectangular or triangular in section clean sawn secured with nails or brads sectional area exc. 13 but n. exc. 25 sqcm complete all as specified and directed. |
| 73 | S&F plain fillet of 2nd class hard wood, square, rectangular or triangular in section clean sawn secured with nails or brads sectional area exc. 13 but n. exc. 25 sqcm complete all as specified and directed. |
| 74 | S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed. |
| 75 | S&F in repairs 100m size handle, CP fancy type suitable for cupborad& drawers, complete all as specified and directed. |
| 76 | S&F magnet catch and brass body and striking plate including letting in, complete all as specified and directed. |
| 77 | M&L for hasp & staple 75mm size, aluminium anodised, safety type, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed. |
| 78 | M&L for hasp & staple 100mm size, aluminium anodised, safety type, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed. |
| 79 | S&F in repairs aluminium powder coated fancy type curtain rod 25mm bore, medium grade complete all as specified & directed. |
| 80 | S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match with complete all as specified and directed. |
| 81 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 82 | M&L for MS structural steel work, framed as in trusses, purlins, rafter etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as specified and directed. |
| 83 | S & Froof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, including dismantling of old unserviceable CGI sheet of any type, complete as specified and directed |
| 84 | S&F in repair Aluminiumheavy duty hydrolic door closer complete all as specifed and directed |
| 85 | S&F in repair Aluminiumheavy dutydoor closer fittied on floor complete all as specified and firected. |
| 86 | S&F 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) |
| 87 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beading in square n. exc 0.5 Sqm in each pane, including hacking out old broken glass if any (any thickness, quality & size), complete all as specified and directed. |
| 88 | S&F 3 mm thick figured glass pin headed type, ordinary quality and glazing with oil putty / wooden beading in square n. exc 0.5 Sqm in each pane, including hacking out old broken glass if any (any thickness, quality & size), complete all as specified and directed. |
| 89 | S&F in repair for stainless steel wire cloth 0.36nominal dia of wire and average width of aperture 1.4mm and fixedwith stanless steel stepple to wooden/steel frames complete all as specified and directed. |
| 90 | S&F 2nd class hard wood of sectional area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall paneling work with melamine polish for architect look complete, fixed with screws in repairs etc. complete all as specified and directed. |
| 91 | Supply and Fixing in repair of solid wall lining consisting of 5 mm thick, plain, coloured or wood grain printed as approved by the Engr-in-Charge, prelam PVC sheet used inclusive of solvent as per specification of manufacture, complete all as specified and directed. Make : Rajshree Plastiwood / Duroplust / Plastopan |
| 92 | Supply and Fixing in repair of 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing as in grid / frame on wall suitable for wall lining / paneling as per specification of manufacture, complete as specified and directed by the Engineer-in-Charge. |
| 93 | S & F of PVC decorative beading of 2-5mm thick moulded / designed for PVC paneling complete all as directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
