Military Engineer Services-MES has published Tender For Repair/ Maintenance Of External Water Supply , Sewage, Fire Fighting System, Fire Alarm And Other Connected Works In Sekhon Vihar Under Ge (Af) Gurgaon No. 1.. Submission Date for this Tender is 01-02-2024. Fire Alarm Systems Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-02-2024 |
| Sl. No. | Item Description |
| 1 | Schedule of Works |
| 2 | Excavation in trenches in any type of soil i.e. loose/soft not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in width and getting out completeall as specified and as directed by Engineer-In-Charge. |
| 3 | Returning,filling and including spreading, leveling and watering and well ramming in layers not exceeding 25 cm to achieve desired compaction complete as specified and as directed by Engineer-In-Charge. |
| 4 | Removing of excavated material/soil to a distance not exceeding 50 Mtrs and depositing at a level not exceeding 1.5 Mtr above the starting point all as directed by Engineer-In-Charge. |
| 5 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregates) for repairing of valve chamber foundation etc including filling in road cuts/ hard standing etc completeall as specified and as directed. |
| 6 | Demolition of old brick work and M&L for brick work in cement mortar 1:6 using sub class "B" brick straight or curved on plain not exceeding 6m meanradius completeall as specified and as directed. |
| 7 | M&L for 10 mm thick cement plaster in cement mortar 1:4 surface other than fair faces of brick / concrete surfacesetc finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | Cleaning of Bar screen chamber of size 1.7 x 2x2.5 mtrand grit chamber of size 1.7 x 2x2.5 mtrby operating suction machine of capacity 5000 ltr with air blowing compressor including required manpower to operate the same and handling all the cleaning process for dissolving slit with sewage water and taking out mixed slit, mud andsludge after scraping from surfaces and making necessary arrangement required for cleaning including replacement of broken/ blockage air blowing network complete all as specified and as directed by Engineer-in-Charge. Note :- 1. Cleaning shall be done at a span of every 3 months starting from the date of commencement. 2. Each time cleaning shall be counted as one Job. 3. Sludge/Mud should be dispose 2KM away from the station. |
| 9 | Cleaning of main sawage collection sump (of sizes 8.3 x 8.6 x 3 mtr) by operating suction machine of capacity 5000 ltr with air blowing compressor including required manpower to operate the same and handling all the cleaning process for dissolving slit with sewage water and taking out mixed slit and sludge after scraping from surfaces and making necessary arrangement required for cleaning including replacement of broken/ blockage air blowing network all as specified and as directed by Engineer-in-Charge. Note :- 1. Cleaning shall be done at a span of every 3 months starting from the date of commencement. 2. Each time cleaning shall be counted as one Job. 3. Sludge/Mud should be dispose 2KM away from the station. |
| 10 | Cleaning of aeration tank/treated water tank (of size10.7 x 8.8 x 6.0 mtr)by operating suction machine of capacity 5000 ltr with air blowing compressor including required manpower to operate the same and handling all the cleaning process for dissolving slit with sewage water and taking out mixed slitmud and sludge after scraping from surfaces and making necessary arrangement required for cleaning including replacement of broken/ blockage air blowing network all as specified and as directed by Engineer-in-Charge. Note :- 1. Cleaning shall be done at a span of every 3 months starting from the date of commencement. 2. Each time cleaning shall be counted as one Job. 3. Sludge/Mud should be dispose 2KM away from the station. |
| 11 | Cleaning of MBBR tank(of size 7.2 x 6.0 x 3.0 mtr) for cleaning of above ground sewage collection tanksby operating suction machine of capacity 5000 ltr with air blowing compressor including required manpower to operate the same and handling all the cleaning process for dissolving slit with sewage water and taking out mixed slitmud and sludge after scraping from surfaces and making necessary arrangement required for cleaning including replacement of broken/ blockage air blowing network all as specified and as directed by Engineer-in-Charge. Note :- 1. Cleaning shall be done at a span of every 3 months starting from the date of commencement. 2. Each time cleaning shall be counted as one Job. 3. Sludge/Mud should be dispose 2KM away from the station. |
| 12 | Cleaning of tube settler tank ( of size 6.0x3.0xx3.0 mtr)by operating suction machine of capacity 5000 ltr with air blowing compressor including required manpower to operate the same and handling all the cleaning process for dissolving slit with sewage water and taking out mixed slit, mud andsludge after scraping from surfaces and making necessary arrangement required for cleaning including replacement of broken/ blockage air blowing network all as specified and as directed by Engineer-in-Charge. Note :- 1. Cleaning shall be done at a span of every 3 months starting from the date of commencement. 2. Each time cleaning shall be counted as one Job. 3. Sludge/Mud should be dispose 2KM away from the station. |
| 13 | Cleaning of Pre filtration tank ( of size 6.0x3.0xx3.0 mtr)by operating suction machine of capacity 5000 ltr with air blowing compressor including required manpower to operate the same and handling all the cleaning process for dissolving slit with sewage water and taking out mixed slit, mud andsludge after scraping from surfaces and making necessary arrangement required for cleaning including replacement of broken/ blockage air blowing network all as specified and as directed by Engineer-in-Charge. Note :- 1. Cleaning shall be done at a span of every 3 months starting from the date of commencement. 2. Each time cleaning shall be counted as one Job. 3. Sludge/Mud should be dispose 2KM away from the station. |
| 14 | M&L for taking out old sand/pebblesfrom dual media filterof size 5 mtr dia and 1.8 height and shape and filling the new sand/Pebblesmedia as per matching to existing size and shape as per requirement complete all as specified and as directed by Engineer-in-charge. |
| 15 | M&L for taking out old activated carbon media/Pebbles from activated carbon filter of size 5 mtr dia and 1.8 height andfilling the new actvated carbon media and pebbles as per matching to existing size and shape as per requirement complete all as specified and as directed by Engineer-in-charge. |
| 16 | M&L for taking out old filter media from MBBR tank of size 7.2 x 6.0 x 3.0 mtrand filling the new filter media upto requirement level complete all as specified and as directed by Engineer-in-charge. |
| 17 | Disconnect the cable connection fromcentrifugal sewage pump set of 02 HP capacitysludge pump from foundation with the help of special tools, opening the pump and motor completely and remetaling/grinding/polishing pump shaft, including replacement of gasket packing complete overhauling and re-assembling, testing and commissioning complete all as specified and directed.Note:- Cost of loading/ and transportation is deemed to fit in the quoted rates |
| 18 | Disconnect the cable connection fromcentrifugal sewage pump set of 02 HP capacitysludge pump from foundation with the help of special tools, opening the motor and rewinding with super enameled copper wire as per existing gauge including varnishing, making it serviceable by replacement of all unserviceable spares and make motor serviceable complete all as specified and as directed by Engineer-in-charge. |
| 19 | Disconnect the cable connection from centrifugal pump set of capacity 5.0/7.5 HP from treated water system and repair the same by rewinding with super enameled copper wire as per existing gauge including varnishing, making it serviceable by replacement of all unserviceable spares like pump impeller- 01 No, inner and outer rotor - 01 set, complete gasket - 01 Set and bushing-02 Nos and testing the same after installation including necessary cable and pipelines connections complete all as specified and as directed by Engineer-in-charge. Note :- (i) Any parts require for replacement shall be measured and paid seperately as "supply only" rates under respective item of Schedule.(ii) Rate for item required other than below mentioned items shall be included in rate quoted by the contractor for this item. |
| 20 | Supply onlyof "O" ring complete all as specifed and as directed by Engineer-in-charge. |
| 21 | Supply onlyof mechanical seal complete all as specifed and as directed by Engineer-in-charge. |
| 22 | Supply only water seal complete all as specifed and as directed by Engineer-in-charge. |
| 23 | Supply only ofballbearing for centrifugal pump set for 5.0/7.5 HP as per existing make and size complete all as specifed and as directed by Engineer-in-charge. Make : SKF/NBC/TATA. |
| 24 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers , of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified includingprovision of GI stripprotected by 40 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation andearth work & connecting the earthing to an earthing test pointcomplete all as specified & directed by Engr-in-Charge. |
| 25 | M&L for taking out burnt unserviceable sewage submersible pump set of capacity 7.5/10.0 HP from main sewage collection sump and repair of same by rewinding with super enameled copper wire as per existing gauge including varnishing, making it serviceable by replacement of all unserviceable spares like pump impeller- 01 No, inner and outer rotor - 01 set, complete gasket - 01 Set and bushing-02 Nosand testing the same after installation including necessary cable and pipelines connections complete all as specified and as directed by Engineer-in-charge. Note :- (i) Any parts require for replacement shall be measured and paid seperately as "supply only" rates under respective item of Schedule.(ii) Rate for item required other than below mentioned items shall be included in rate quoted by the contractor for this item. |
| 26 | Supply only"O" ring complete all as specifed and as directed by Engineer-in-charge. |
| 27 | Supply only mechanical seal complete all as specifed and as directed by Engineer-in-charge. |
| 28 | Supply only water seal complete all as specifed and as directed by Engineer-in-charge. |
| 29 | Supply only ballbearing for sewage submersible pump set for 7.5/10.0 HP as per existing make and size complete all as specifed and as directed by Engineer-in-charge. Make : SKF/NBC/TATA. |
| 30 | M&L for repairing and servicing of fertilizer machine including re-winding of 15 HP capacity centrifugal pump motor with super enameled copper wire as per existing gauge including varnishing, and replacement of all unserviceable spares like bearing-02 Nos, gasket-01 Set and power supply connector plate -01 No etcmaking it serviceable and testing the same complete all as specified and as directed by Engineer-in-charge |
| 31 | Supply & Fix in replacement of 3/8" PVC flexible suction/ delivery pipe as per existing pipe for chlorination system complete all as specified and as directed by Engineer-in-charge |
| 32 | M&L for repair to unserviceable dosing pump for chlorination system and repair of same , including replacement of all unserviceable spares like pump tube - 01 No, pump head -010 No and injection check valve -01 No and making it serviceable by replacement of unsv parts and testing the same complete all as specified and as directed by Engineer-in-charge. |
| 33 | Supply & Fix in replacement of pre air filter for 25 HP Air compressor as per matching to existing type complete all as specified and as directed by Engineer-in-charge.Make : ELGI for for 25 HP copmressor /similar makes of air filter AEROFLEX/ENVIRO |
| 34 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x4 mm as earth strip bymeans of bolts, nuts, check nuts and washers , of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified includingprovision of GI stripprotected by 50 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation andearth work & connecting the earthing to an earthing test pointcomplete all as specified & directed by Engr-in-Charge. |
| 35 | M&L for dismantling unsv compressor from its foundation and disconnecting the burnt electric terminals from its terminal block by carefully taking out the insulated conductors together with the burnt lugs etc complete and taking the compressor to work shop at a distance not exceeding 15 kms from site and dismantling the compressor for replacement of all leaking gaskets,bailings out compressor oil and refilling /reassembling entire compressor complete to make it functional and testing therefore , all as specified and as directed . Note : (i)Replacement of compressor oil wil be measured and paid seperately in the respective item.(ii)Cost of loading/lifting and transportation is deemed to fit in the quoted rates |
| 36 | M&L for replacement of 360 grade compressor oil suitable for air compressor complete all as directed. Make : Servo/Atlas/Castrol. |
| 37 | Supply & Fix in replacement of motor belt B93 series ser No B2362 for driving the air compressorcomplete all as specified and as directed by Engineer-in- charge. Make : Hi-flex/Poly-F/Pix. |
| 38 | Supply & Fix in replacement of pulley for driving the air compressor as per existing type complete all as specified and as directed by Engineer-in- charge. |
| 39 | Taking out of old unserviceable cascading type areator from its original location by carefully taking down the entire steel structure by using gas cutters and preparing the cut surface to re fabrication purpose , scrubbing and cleaning complete all as specified and as directed. |
| 40 | Material & labour for MS framed work, fabricating of ladder/cascading type areator from structural steel sections including welding, bending, cold or hot, drilling holes for bolts at both ends, in any shape or size and as indicated or directed having MS angle as per requirement size inclusive of two coats of synthetic enamel paint over a coat of red oxide primer and fixing in walls/roof etc complete all as specified and directed by Engr-in-Charge.Note: Cost of taking down/dismantling is deemed to be included in quoted rates by contractor. |
| 41 | Supply and Fix in replacement of SS stud nuts and bolts as per matching to existing and as directed by engr in charge |
| 42 | Taking shut down from main LT panel and making repair to any type of LT electric starter panel including welding of hanging/broken door, spary painting after scrapping old surfaces with synthetic enamel paint, dismantling of old wiring discipline inside the panel re-installation of wiring discipline according to the existing one complete with all relevant connection with cable glands, thimble and proper termination all as specifed and as directed by Engineer-in-charge. |
| 43 | Supply and fix in replacement of PVC junction box of size 140 x 140 x 95 mm having connector for LT cable as per matching to existing complete all as specified and as directed by engr in charge. |
| 44 | Testing ofSTP beforetreatment to analysis the following parameter as per IS 10500:2000 through Govt. approved agency:- a) Physicochemical parameters of water / eflluent sample b) Oil and grease, mg/l max. c) Total residual chlorine, mg/l max. d) Biochemical oxygen demand mg/l max.e) Chemical oxygen demand mg/l max. f) Suspended solids mg/l max. Note:- Water sample for testingshall be arranged by the contractor. 2. Testing shall be done at a span of every 3 months starting from the date of commencement. |
| 45 | Testing ofSTPafter treatment to analysis the following parameter as per IS 10500:2000 through Govt. approved agency:- a) Physicochemical parameters of water / eflluent sample b) Oil and grease, mg/l max. c) Total residual chlorine, mg/l max. d) Biochemical oxygen demand mg/l max.e) Chemical oxygen demand mg/l max. f) Suspended solids mg/l max. Note:- Water sample for testingshall be arranged by the contractor. 2. Testing shall be done at a span of every 3 months starting from the date of commencement. |
| 46 | Supply & Fix in replacement of CI butterfly valve of size 40mm, PN 1.6 , Gear operated as per matching to existing shape complete all as specified and directed. |
| 47 | Supply & Fix in replacement of CI butterfly valve of size 80mm , PN 1.6 , Gear operated complete all as specified and directed. |
| 48 | Supply & Fix in replacement of CI butterfly valve of size 100mm , PN 1.6 , Gear operated complete all as specified and directed. |
| 49 | Supply & Fix in replacement of CI butterfly valve of size 150mm , PN 1.6 , Gear operated complete all as specified and directed . |
| 50 | Supply & Fix in replacement of MCB SP 6 amps "C" series complete all as specified and directed. |
| 51 | Supply & Fix in replacement of MCB DP 10 amps "C" series complete all as specified and directed. |
| 52 | Supply & Fix in replacement of MCB TP 10 to 32 amps "C" series as per site requirement complete all as specified and directed. |
| 53 | Supply & Fix in replacement of Selector switch as per sample complete all as specified and directed. Make : Havells/Schnider/L&T |
| 54 | Supply & Fix in replacement of on off push buttonas per sample complete all as specified and directed. Make : Havells/Schnider/L&T |
| 55 | Supply & Fix in replacement of cable connectorsas per sample complete all as specified and directed. Make : Havells/Schnider/L&T |
| 56 | S&F in replacement of MCCB 3 pole 63A, Fixed Overload & fixed short circuit setting, breaking capacity 16KA fixed inin LT panels, complete all as specified and as directed by Engr-in-charge. |
| 57 | S&F in replacement of MCCB 3 pole 100A, Fixed Overload & fixed short circuit setting, breaking capacity 16KA fixed inin LT panels, complete all as specified and as directed by Engr-in-charge. |
| 58 | M&L for General overhauling & servicing of Jockey pump set of 15 HP motor complete with cleaning, change of gasket, greasing, coupling etc all as specified and as directed by engineer in charge Note cost of transportation, loading and lifting are deemed to be fit in quoted rates by the contractor. |
| 59 | Supply and fix in replacement of 200 ltr capacity MS diesel tank with level indicator complete all as specified and as directed by engineer in charge |
| 60 | M&L for Hydraulic testing of air vessel with air release valve, ball valve complete all as specified and as directed by engineer in charge |
| 61 | Supply and fix in replacement of Y-strainer 200mm diacomplete all as specified and as directed by engineer in charge |
| 62 | Taking out sluice valves, & supply and Fix new Sluice valve IS 14846 PN 1.6 SS spindle flanged type of size 200mm bore including necy gaskets and nut bolts as reqd at site complete all as specified and directed |
| 63 | All as per item No.61 above but of size 150mm bore -ditto-. |
| 64 | All as per item No.61 above but of size 100mm bore -ditto-. |
| 65 | All as per item No.61 above but of size 80mm bore -ditto-. |
| 66 | Supply and fix in replacement of CI non return valve, PN 1.6 both end flanged joint of size 200 mm all as specified and as directed by engineer in charge. |
| 67 | Supply and fix in replacement of CI non return valve, PN 1.6 both end flanged joint of size 100 mm all as specified and as directed by engineer in charge. |
| 68 | Supply and fix in replacement of Foot Valve conforming to IS 4038, 200 mm (8”) dia all as specified and as directed by engineer in charge |
| 69 | Supply & fix in replacement of fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290 complete all as specified and directed. |
| 70 | Supply and fix in replacement of hose reel of 20 mm dia and 30 meter length conforming to IS 5132 complete all as specified and directed. |
| 71 | Supply and fix in replacement of branch pipe with nozzle of 20 mm dia for hose reel conforming to IS 8090 complete all as specified and directed. |
| 72 | Supply and fix in replacement of Fire brigade inlet connection 4 way all as specified and as directed by engineer in charge |
| 73 | Supply and fix in replacement of Yard hydrant Post / Stand Post 80mm Dia GI / MS both flanged type 1.5m Height complete all as specified and directed. |
| 74 | Supply and fix in replacement of Hose box made of 18 gauge MS Sheet 750mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard all as specified and as directed by engineer in charge |
| 75 | M&L for painting with spray gun with two coats of synthetic enameled red paint over a coat of red oxide primer including preparation of old painted surfaces/ removing old faded/ rust/ cemented material of surface for fire hose boxof size 18 gauge MS Sheet of size 750mm X 600mm X 250mm on both sides complete all as specifed and as directed. |
| 76 | Disconnect the 180 AH battery lead connections from 82.5 KVA Diesel Engine pump set and transport the battery to work shop for reconditioning work by using dedicated battery regenerator. Sulfation on plates should be removed by using high powered pulses, reconstruct the damaged battery post, replace the electrolyte and recharge the battery upto 24 to 36 hours to gain more than 12 volts. After completion of reconditioningwork the battery will be refix at the same generator including necessary testings complete all as specified and directed. |
| 77 | Taking down unserviceable rusted MS pipe of size 200 mm and M&L forMS flanged pipe 200mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primerall as specified and as directed by engineer in charge |
| 78 | Taking down unserviceable rusted MS pipe of size 100 mm and M&L forMS flanged pipe 200mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primerall as specified and as directed by engineer in charge |
| 79 | Taking down unserviceable rusted MS pipe of size 80 mm and M&L forMS flanged pipe 200mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primerall as specified and as directed by engineer in charge |
| 80 | Supply and fix in replacement of pressure guage 4" ,dail rating 0-21 Kg complete all as specified and as directed by engineer in charge |
| 81 | Supply and fix in replacement of Foot Valve conforming to IS 4038, 150 mm (6”) dia all as specified and as directed by engineer in charge |
| 82 | Supply and fix in replacement of Y-strainer 100 mm diacomplete all as specified and as directed by engineer in charge |
| 83 | M&L for Servicing & cleaning of Y-strainer after dismantling from system 100/200 mm diacomplete all as specified and as directed by engineer in charge |
| 84 | Supply and fix in replacement of pressure switch complete all as specified and as directed by engineer in charge |
| 85 | Supply and fix in replacement of Y-strainer 80mm diacomplete all as specified and as directed by engineer in charge |
| 86 | M&L for painting with spray gun with two coats of synthetic enameled red paint over a coat of red oxide primer including preparation of old painted surfaces/ removing old faded/ rust/ cemented material of surface for the all items complete of approved shade for 100 mm dia MS pipe on roof of block and from top to bottom of fire line, hose drum and necy sluic valves of each blockon both sides of G+10 floors pipe line complete all as specified and directed. |
| 87 | M&L for painting of fire door of 18 gauge sheet welded on angle iron frame with half glass portion and half MS sheet fof size 2.2 mtr x 1.2 Mtr duly painted red colour with synthetic enamaled paint on both side completeall as specified and as directed by Engineer-in-charge. |
| 88 | M&L for replacing of 6 mm thick glass of fire door of 18 gauge sheet welded on angle iron frame having half glass portion and half MS sheet complete as per existing sizeall as specified and as directed by Engineer-in-charge. |
| 89 | Disconnect the cable connection from Jocky pump set of capacity 15 HP from fire pump house LT Panel and repair of same by rewinding with super enameled copper wire as per existing gauge including varnishing, making it serviceable by replacement of all unserviceable spares like pump impeller- 01 No, inner and outer rotor - 01 set, complete gasket - 01 Set and bushing-02 Nos and testing the same. After tesitng lowering the submersible pump set and making connection of pipelines complete all as specified and as directed by Engineer-in-charge. |
| 90 | Taking outsquirrel cage induction motor of 12.5 HP capacity , 1450RPM on terrace from foundation with the help of special tools, opening the pump comletely and remetaling/grinding/polishing pump shaft, including replacement of gasket packing complete overhauling and re-assembling, testing and commissioning complete all as specified and directed.Note:- (i) Cost of loading/ and transportation is deemed to fit in the quoted rates. (ii) Speres will be measured and paid separately under respective of BOQ |
| 91 | Supply and fixing in replacement of flexible coupling for 12.5 Hp motor pump setas per sample complete all as specified and directed. |
| 92 | Supply and fixing in replacement of coupling hub suitable for single/multi stage centrifugal pump set of 12.5 HP capacity complete with all plates, nuts, bolts and connected accessories. Make of pumps :- Kirloskar |
| 93 | M&L for in replacement of unserviceable PA equipment enclosure box complete all as specified and directed . Make : Agni/Honeywell/Tata. |
| 94 | M&L for repair/replacement of unserviceable hooter complete all as specified and directed. Make : Agni/Honeywell/Tata. |
| 95 | Taking up or down from trenches/wall/floor any sizeCI pipe and fittings including for refixing or for schedule of creditcomplete all as directed (Note:- Earth work will be measured & paid separately.) |
| 96 | M&L in replacement of Cast iron pipes with flanged ends, centrifugally cast, class A tubing of size 80 mm bore complete all as specified and as directed by Engineer-in-charge. |
| 97 | M&L in replacement of Cast iron pipes with flanged ends, centrifugally cast, class A tubing of size 100 mm bore complete all as specified and as directed by Engineer-in-charge. |
| 98 | M&L in replacement of Cast iron pipes with flanged ends, centrifugally cast, class A tubing of size 150 mm bore complete all as specified and as directed by Engineer-in-charge. |
| 99 | M&L in replacement of Cast iron pipes with flanged ends, centrifugally cast, class A tubing of size 200 mm bore complete all as specified and as directed by Engineer-in-charge. |
| 100 | M&L for burningof lead joint for CI pipelines of size 80 mm bore complete all as specified and as directed By Engineer-in-charge. |
| 101 | M&L for burningof lead joint for CI pipelines of size 100 mm bore complete all as specified and as directed By Engineer-in-charge. |
| 102 | M&L for burningof lead joint for CI pipelines of size 150 mm bore complete all as specified and as directed By Engineer-in-charge. |
| 103 | M&L for burningof lead joint for CI pipelines of size 200 mm bore complete all as specified and as directed By Engineer-in-charge. |
| 104 | M&L for taking out burnt unserviceable centrifugal pump set of capacity 50 HP from foundation by using special T&Pand repair the same by rewinding with super enameled copper wire as per existing gauge including varnishing, making it serviceable by replacement of all unserviceable spares like pump impeller- 01 No, inner and outer rotor - 01 set, complete gasket - 01 Set and bushing-02 Nos and testing the same. After tesitng lowering the submersible pump set and making connection of pipelines complete all as specified and as directed by Engineer-in-charge. Note :- (i) Any part require replacement shall be measured and paid seperately(ii) Rate for item required other than below mentioned items shall be included in rate quoted by the contractor for this item. (iii) Cost of loading, unloading and transportation is deemed to fit in the quoted rates. |
| 105 | S&F in replacement offlexible coupling for 50 Hp motor pump setas per sample, complete all as specified and directed. |
| 106 | S&F in replacement ofcoupling hub suitable for single/multi stage centrifugal pump set of 50 HP capacity complete with all plates, nuts, bolts and connected accessories complete all as specified and directed. Make of pumps :- Kirloskar |
| 107 | S&F in replacement of of bearing no 6309 suitable for 50 HPcentrifugalpump set complete all as per matching to existing complete all as specified and directed. Make: SKF/NBC/TATA |
| 108 | S&F in replacement ofshaft for centrifugal pump set of 50 HP capacitycomplete as per matching to existing complete all as specified and directed. Make: SKF/NBC/TATA |
| 109 | S&F in replacement of long & short bush for centrifugal pump set of 50 HP capacitycomplete as per matching to existing complete all as specified and directed. Make: SKF/NBC/TATA |
| 110 | Supply & Fix in replacement of cast iron type closedimpeller for centrifugal pump set of 50 HP capacitycomplete as per matching to existing complete all as specified and directed. |
| 111 | Lifting of submersible pump set of capacity 10 HP with column pipe of size 50/80 mm bore dia ,40 Nos of each 3 meters long from 200/300 mm dia bore well, dismantling submersible pump and each pipe section with and including cleaning of pipes by using wire brush/non toxic solution etc. and washing thoroughly and connecting the column pipes after cleaning of threaded/flanged portions andreplacementof worn out nuts, bolts attached and then coupling and lowering the submersible pump with column pipes carefully and put into operation complete all as specified and as directed. Note :Replaced of column pipewill be measured and paid under respective items here in after. |
| 112 | M&L for repair/ rewinding of 10 HP submersible pump with PVC insulated copper wire as per existing gauge including vanishing, insulating material complete all as directed and greasing, oiling etc and including reassembling fixing in position making connection and necessary testings complete all as specified and as directed. Note :- Cost of loading/ and transportation is deemed to fit in the quoted rates |
| 113 | M&L for repair/ replacement of 10 HP submersible pump impeller, eye of impeller, and discharge nozzles complete all as directed and greasing, oiling etc and including reassembling fixing in position making connection and necessary testings complete all as specified and as directed. Note :- Cost of loading/ and transportation is deemed to fit in the quoted rates |
| 114 | M&L dewatering, cleaning of water supply storage tanks of capacity 40000 Ltrs at SEKHON VIHAR 10 storey bldgs with high pressure jet complete all as directed as following:- (i)Dewatering the tank with portable submersible pump. (ii) Removal of left over dirty water and sludge with special sludge removal pump set. (iii) Cleaning of wall ceiling and floor by high pressure rotary water jet pump which create pressure of 80-120. (iv)Removing remaining sludge from the floor with the help of industrial vaccum cleaner. (v)Treatment of inside tank be exposing UV radiation kill the suspended or floating bacterial remaining in the tank. (vi)Fixing of tank lid/cover properly after cleaning with proper locking to avoid monkey menace. |
| 115 | Supply & Fix in replacement of PN 1.6 pressure CI Non return valve of size 150mm in suction / delivery pipeline complete all as specified and as directed by Engineer-in-charge |
| 116 | Supply & Fix in replacement of PN 1.6 pressure CI air release valve with strainer of size 150mm in suctionpipeline complete all as specified and as directed by Engineer-in-charge |
| 117 | Supply & Fix in replacement of Gun-metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 80mm bore complete all as specifed and as directed by Engineer-in-charge. |
| 118 | Supply & fill calcium Hypochlorite having 60 - 70 % available chlorine, water insoluble matter max 6 %, Calcium hydroxide max 4 % and sodium chloride 15 %packed in 40 kg to 45 kg plastic drum forwater treatment. |
| 119 | Supply & Fix replacement of 2 pole, 25 Amps power contactor to match the size ofexisting model complete all as specified and directed. Make:- L&T/ Havells/ Schneider. |
| 120 | Supply & Fix replacement of 2 pole, 32 Amps power contactorto match the size ofexisting model complete all as specified and directed. Make:- L&T/ Havells/ Schneider. |
| 121 | Supply & Fix replacement of 3 pole , 40 Amps power contactor to match the size ofexisting model complete all as specified and directed. Make:- L&T/ Havells/ Schneider. |
| 122 | Supply & Fix replacement of 3 pole 50 Amps power contactor to match the size ofexisting model complete all as specified and directed. Make:- L&T/ Havells/ Schneider. |
| 123 | Supply & Fix replacement of 3 pole 80 Amps power contactor to match the size ofexisting model complete all as specified and directed. Make:- L&T/ Havells/ Schneider. |
| 124 | Supply & Fix replacement of Overload Relays suitable for 25 Amps power contactor complete all as specified and directed. |
| 125 | Supply & Fix replacement of Overload Relays suitable for 32 Amps power contactor complete all as specified and directed. |
| 126 | Supply and Fix replacement of Overload Relays suitable for 40Amps power contactor complete all as specified and directed. |
| 127 | Supply & Fix replacement of Electronic Timer 3 to 30 sec 415 volts 50 Hz as per sample requirement complete all as specified and directed. |
| 128 | Supply and Fix in replacement of phase sequence relay requirement complete all as specified and directed. Make:- L&T/ HPL/Schneider |
| 129 | Supply and Fix replacement of Single Phase Preventor upto 30 Amps rating as per existing type and model complete all as specified and directed. Make:- L&T/Havells/Schneider |
| 130 | Supply & fix replacement of indicating lamps with LED lamps in starter panel requirement complete all as specified and directed. |
| 131 | Supply and fix in replacement of DOL starter panel consisting of main ON/OFF switch, fuses, SPP water level controller, temp controller, ammeter, voltmeter with VSS, automanual switch, moisture sensor for pump of capacity5.5 KW of make KSB model F100-215 complete all as specified and directed. Make :Siemens cat part no 3TW7291-1A*75/KSB/Kirliskar |
| 132 | Supply & Fix in replacement of 3 core 6 sqmm copper conductor flat submersible cable complete all as specified and as directed by Engineer-in-charge. |
| 133 | Supply & Fix in replacement of single core 10 sqmm copper conductor flexible cable for connection of pumps at STP complete all as specified and as directed by Engineer-in-charge. |
| 134 | Supply & Fix in replacement of single core 25 sqmm copper conductor flexible cable for connection of 50 HP centrifugal pumps from stater panel at pump house complete all as specified and as directed by Engineer-in-charge. |
| 135 | M&L for replacement of valve pit cover of MS plate of 1.6 mm thick framed in angle iron 40X40X6mm with hinges, locking arrangementcomplete all as specifed and as directed by Engineer-in-charge. Note:- Cost of welding is deemed to be fit in quoted rates.PCC should be measured and paid separately. |
| 136 | Disconnecting the cable connection and removing unserviceable ammeter of size 96 mm x 96 mm and supply and fix in replacement of Digital ammeter of existing size and shape incliding necessary connectionscomplete all as specified and directed |
| 137 | Disconnecting the cable connection and removing unserviceable voltmeter of size 96 mm x 96 mm and supply and fix in replacement of Digital voltmeter of existing size and shape incliding necessary connectionscomplete all as specified and directed. |
| 138 | M&L for filling gland doori of any size for arresting the water leakage for water pumps and sluice valves all as directed by Engg-In-Charge. |
| 139 | M&L for preparation of old painted surfacesat pump house like 50 Hpcentrifugal pump with motor - 04 Nos, 150mm/200 mm CI pipe line - 48 RMincl removal of grease, spots, dust etc and applying of two coats of synthetic enamel paint on existing surfaces complete all as specified and directed. |
| 140 | M&L in replacement of cast iron fittings up to 150 mm bore ie bend, Tee pieces, Y junction, cross, collars, caps and plugs, connecting pieces etc including taking out/dismantling old unserviceable fittings, complete all as specified and directed. |
| 141 | Supply and fixing in replacement Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore all as specified and directed. |
| 142 | M&L for complete rewinding of 0.5 HP unserviceable SS agitator motor with the help of special tools, with super enameled copper wireas per existing gauge including vanishing, insulating material complete all as directed and greasing, oiling etc and including reassembling fixing in position making connection testing, commissioning & transporting complete. Note :-1. Any defects after rewinding shall be rectified by the contractor at his own expenses. 2 Cost of loading/lifting and transportation is deemed to fit in the quoted rates |
| 143 | Supply and fixing GI column pipes both ends flanged type of 50 mm bore dia heavy duty(each pipe of3 meters) long as per site requirement complete all as specified and as directed. |
| 144 | Supply and fixing GI column pipes both ends flanged type of 80 mm bore dia heavy duty(each pipe of3 meters) long as per site requirement complete all as specified and as directed. |
| 145 | Dismantling of damage/broken valve chamber and Construction of valve chamber in brick masonary built CM (1:4) with MS frame of size 45x45x6 mm thcik with MS plate cover 1.6 mm thick and locking arragement including excavation and earth work in any type of soil, PCC (1;3:6) typeC1 in foundation PCC(1:2:4) type B1 for coping plastering on brick work 10 mm thick in CM(1:4) type Bq and painting with one coat of red oxide primer and two coats of bituminous black paint on all steel surfaces all as specified and as directed of size 1200 mm x 1200 mm x 1200 mm. Note : The rate quoted is deemed to be included the cost of excavation and earth work complete. |
| 146 | M&L for Audit of fire fighting system installed at Fire Pump House at Sekhon Vihar as under:(A) Objective :- (a) To find out the drop in performance of main fire pumps 75 HP (02 nos) Jockey pump 15 HP (02 nos), MS pipe line of size 80 mm to 200 mm, Sluice valve of size from 80 mm to 200 mm, NRV of size from 80mm to 200 mm, yard hydrants, wet risers etc to ascertain the fire fighting capacity of hydrant (b) Fire Safety Audit -To audit the Fire safety arrangement. (c) Audit of Emergency Preparedness (B) Methodology 1. Shut of the complete hydrant system and measure head of the pump. 2. Adjust head of the pump by existing valve of the hydrant, measure the flow of water by opening the hydrant accordingly. 3. Hydrant to be opened to be delivered 125% of the flow. 4. To check the rpm of pump at each operating point. 5. Draw performance curve to show actual verses original pump data. Note: Audit of fire fighting system shall be done by specialistapproved agencies. |
| 147 | M&L for Hydraulic testing of air vessel with air release valve, ball valve complete all as specified and as directed by engineer in charge |
| 148 | Testing of Bore well water/UG sump to analysis the following parameter as per IS 10500:2000 through Govt. approved agency:- a) Physicochemical parameters of water / eflluent sample b) Bactoriological test of water sample. c) Metals (Expect Hg, As & Se). d) Pesticides. Note:- Water sample for testingshall be arranged by the contractor. 2. Testing shall be done at a span of every 3 months starting from the date of commencement. |
| 149 | M&L for rectification of leakage from80 mm size bore GI pipe line by cutting and removing old lengh of pipe, supply & fix new new galvanised iron pipe 80 mm bore medium grade pipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge. |
| 150 | M&L for rectification of leakage from GI 50 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new galvanised iron pipe 50 mm bore medium grade pipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge. |
| 151 | M&L for rectification of leakage from GI 40 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new galvanised iron pipe 40 mm bore medium grade pipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge. |
| 152 | M&L for rectification of leakage from GI 25 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new galvanised iron pipe 25 mm bore medium grade pipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge. |
| 153 | M&L for rectification of leakage from80 mm size bore CI pipe line by cutting and removing old lengh of pipe, supply & fix new cast iron pipe of size80 mm borepipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge. |
| 154 | M&L for rectification of leakage from100 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new cast iron pipe 100 mm borepipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge. |
| 155 | M&L for rectification of leakage from150 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new cast iron pipe 150 mm borepipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge. |
| 156 | M&L for rectification of leakage from200 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new cast iron pipe 200 mm borepipe for stopping the leakage by making welding/replacemnt of necessary fittings of the same after drain out water from pipeline including insertion of pipe length upto 01 RM complete all as specifed and as directed by Engineer-in-charge.Note ( For item Ser No 148.00 to 155.00) -1. Earth work will be measured and paid separately.2. Quoted rate should be included up to one RM unit length. |
| 157 | Taking up or down from trenches/wall/floor/ceiling, steel tubing and connections including for refixing or for schedule of creditcomplete all as directed of the following size:-(Note:- Earth work will be measured & paid separately.) |
| 158 | 50mm bore |
| 159 | 40mm bore |
| 160 | 25mm bore |
| 161 | 20mm bore |
| 162 | M&L forGI tubing medium grade including GI fittings like sockets, elbow, bends, tees , union, short pieces etc. laid in trench complete all as specified and as directed of size. |
| 163 | 50 mm bore |
| 164 | 40 mm bore |
| 165 | 25 mm bore |
| 166 | 20 mm bore |
| 167 | S&F in replacement of MCCB 3 Pole, 415 V, fixed thermal and fixed magnetic type,160 Amps with breaking capacity 16 KA suitable for fixing inin LT panels as per sample, complete all as specified and as directed by Engr-in-charge. |
| 168 | S&F in replacement of MCCB 3 Pole, 415 V, Adjustablethermal and magnetic type, 200 Amps with breaking capacity 36 KA suitable for fixing inin LT panels as per sample, complete all as specified and as directed by Engr-in-charge. |
| 169 | S&F in replacement of MCCB 3 Pole, 415 V, Adjustablethermal andmagnetic type, 250 Amps with breaking capacity 36 KAsuitable for fixing inin LT panels as per sample, complete all as specified and as directed by Engr-in-charge. |
| 170 | M&L for repairing of unserviceable conventional type fire alarm control panel system complete by replacement of burnt control wiring , and unserviceable electrical components andmake the system serviceable and make necessary testings after completion of repair work complete all as specified and as directed. |
| 171 | M&L for in replacement of unserviceable Mike in fire alarm system complete all as specified and directed . Make : Agni/Honeywell/Tata. |
| 172 | M&L for in replacement of unserviceable PA equipment mother board complete all as specified and directed . Make : Agni/Honeywell/Tata. |
| 173 | M&L for in replacement of unserviceable MCP complete all as specified and directed . Make : Agni/Honeywell/Tata. |
| 174 | Note:-(i)The amount of Rs 69,020.00 against Schedule of Credit on Page No 126 & 127 shall be deducted from the total amount quoted against Sch "A"while deriving the Contract Sum for Acceptance. (ii) As contract is maintenance nature the site can be handed over in pieces as per site availability from users.(iii) Contractor/ contractor rep shall take complaint from MES complaint cell on every day and these complaints shall be rectified with in 48 Hrs. As water supply/sewage system is of vital nature, If any complaint/ work is not completed with in 48 Hrs that can be get executed from any other agency and cost of the same will be deducted from contractor"s dues. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
