Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-02-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-02-2024 |
| 2 | 25-01-2024 | Other Corrigendum | Other | 01-02-2024 |
| 3 | 25-01-2024 | BOQ CORRIGENDUM | BOQ | 01-02-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of Plain Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish to a distanceexceeding 1.5 KM and not exceeding 5.00 KM complete all as specified and as directed. |
| 2 | Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for and removing rubbish to a distance exceeding 1.50 KM and not exceeding 5.00 KM complete all as specified and as directed. |
| 3 | Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 4 | Taking down Chowkats or frames with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.meach complete all as specified and as directed. |
| 5 | Taking down Chowkats or frames with shutters[without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each complete all as specified and as directed. |
| 6 | Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed. |
| 7 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores andremoving rubbish / debris to a distance exceeding 10 KM but not exceeding 15 KM complete all as specified and as directed. |
| 8 | Dismantling of sand stone slabs and tiles in flooring, apron etc of any description or thickness laid dry and pointed in any mortar complete all as specified and directed. |
| 9 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling surfacesetc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 10 KM but not exceeding 15 KM complete all as specified and as directed. |
| 10 | Taking down PVC SWR Pipes [any size or pattern], including all fittings, heads, shoes, bends, swan-necks, etc. from any height complete all as specified and as directed. |
| 11 | Demolition and breaking up 150mm bore drain pipes [Salt glazed ware, AC or Reinforced concrete] of any diameter set in cement mortar complete all as specified and as directed. |
| 12 | M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns in floors, roofs, landings, balconies, canopies, deck slabs complete all as specified and as directed. |
| 13 | M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, preparing and cleaning of all existing steel surfaces and providing a coat of Zinc rich epoxy primer as in antirusting agent including preparing and cleaning of all existing concrete surfaces of any thickness and applying a coat of bonding agent [Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. or M/s Asian Paints Ltd.] as per manufacturer\"s instructions and providing pressure Guniting averaging 25mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent [M/s. Fosroc Chemicals or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.] @ 5% of weight of cement and finishing the surface rough conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished materialto a distance exceeding 1.5 KM but not exceeding 5 KM complete all as specified and as directed.Note: Additional reinforcement such as TMT reinforcement bars or weded steel wire fabric as required shall be measured and paid seperately under relevant items of this BoQ. |
| 14 | M & L for Welded steel wire fabric of weight not exceeding 4 Kg per Sq.m as in lathing to Concrete surfaces etc. including all laps, cutting and wastage complete all as specified and as directed. |
| 15 | M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns & Chajjas etc. and trimming, cleaning the surfaces, thickness varying from 25mm to 100mm, conducting Phenolphthalein test and cleaning the surface and ensuring the surface is clean and free from loose particles and applying a coat of Bonding Agent [Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. or M/s Asian Paints Ltd.] as per manufacturer\"s instructions including disposal and depositing the demolished material exceeding 1.5 KM but not exceeding 5 KM complete all as specified and as directed. Note: During the Phenolphthalein test if it is found that there is no change in the colour, the cutting / chipping of the concrete shall be carried out further down until reaching the good or uncontaminated concrete. |
| 16 | M & L for preparing existing steel surfaces by wire brush, etc. to obtain rust free steel surfaces to receive anti rust treatment andand providing a coat of Zinc Rich Epoxy Primer [Nito Zinc Primer of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. or M/s Asian Paints Ltd.] as per manufacturer\"s instructions to all steel surfaces as in antirust agent including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and as directed. |
| 17 | M & L for Non-Shrink, Cementitious Micro Concrete with comressive strength not less than 50 N/ Sq.mm at 28 days as in structural strengthenig of existing columns, beams and similar structural members using Rendroc RG\" manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. or M/s Asian Paints Ltd. modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in the ratio as per manufacturer\"s instructions, laid in columns, beams and similar structural members including use and waste of water tight formwork to facilitate pouring of micro concrete complete all as per manufacturer\"s instructions including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and as directed.. Note: Measurement shall be considered for circumference at centerline of core thickness. |
| 18 | M & L for roughening surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thickin cement mortar 1:3 mixed with approved water proofing compound [Water proofing compound will be measured and paid separately] as per manufacturers instructions on concrete surfaces finished even and smooth without using extra cementfor levelling the surface and finished smooth and providing Three Coats of Single Component Polymer Modified Fibre Reinforced water proof coating [Brushbond Roofguard of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. or M/s Asian Paints Ltd.] as per manufacturer\"s instructions complete all as specified and as directed. |
| 19 | Supply only integralwater proofing compound [ISI marked] of approved make. |
| 20 | M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. |
| 21 | M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4including provision of 2 Nos of 8mm dia bars at every fourth course of brick work complete all as specified and as directed. |
| 22 | Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] for fair finished surfaces of concrete complete all as specified and directed. |
| 23 | M & L for Powder coated aluminium sections [Minimum 50 Micron thick] of approved colour for Doors, Windows, Ventilators, Partitions with frame and shutters fully or partly glazed, sliding / openable including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts, stainless steel friction hinges, locking arrangementsetc., complete all as specified and as directed.Notes:[a]The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I. [b] Panel inserts such as Glass / Particle board / Gauze Grills shall be measured and paid separately at supply only rates.[c] Weight of aluminium sections shall only be accounted for payment purpose. Weight of aluminium Handles, Butt Hinges & Tower Bolts shall not be accounted for payment purpose. [d] The unit rate quoted shall be deemed to include for cost of jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts, stainless steel friction hinges, locking arrangementsetc., and fixing only of panel inserts ofglass / particle board / gauge/ grills, etc. |
| 24 | S & F Factory made UPVC Sliding Window, White Colour, Two Track of areaexceeding 2.0 Sq.m each, made of extruded profiles with wall thickness of 2.3mm±0.2mm, Window profile with hollow section with multi chamber, Frame of size 60mm X 62mm, Sash of size 42mm X 67mm, Sliding Interlock [one vertical length in each shutter] of size 45.50mm X 28mm, Glazing Bead of size 24.50mm X 16mm, shall be mitred cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM Gasket of size 1.2mm±0.2mm thick, Galvanized Steel Frame of size 30mmx 18mm, Sliding Sash of size 30mm x 12mm, profile to be inserted in required profile, frame shall be fixed to wall with 8mm X 100mm long fasteners, Hardware such as Touch Lock of zinc alloyed [white powder coated], Steel Roller system, including glazing with selected quality glass and fixing of wire mesh, Aluminium track on bottom rail for Two Track Sliding frame, wool pine for Sliding sash and interlock frame shall be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof complete all as specified and as per Manufacturer instructions.Notes: (a) Net opening will be measured for payment purpose.(b) Supply only of Wire mesh, deco grills and glass shall be measured and paid separately under relevant Items of Schedule \"A\" / BoQ. The unit rate quoted by contractor shall include all other connected accessories for glazing/gauzing. (c) The size of UPVC sections specified in the description of item is minimum requirement, if the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department. |
| 25 | Supply only 12mm thick, Prelaminated Particle Board with Decorative Choice Laminated on both sides , Exterior Grade complete all as specified and as directed. |
| 26 | Supply only 4.8mm thick Tinted Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 27 | Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including Powder Coated Aluminium Channel of size 10 X 10 X 1.5mm for fixing Deco Grill complete all as specified and as directed. |
| 28 | S & F 12mm thick Toughened Plain Glass as in Door/ window/ partition panels including cutting to shape , drilling hole as srequired and grinding the edges including necessary fittings complete all as specified and as directed. |
| 29 | S & F Stainless Steel Handles of size 300mm longx 25mm dia made of Stainless Steel pipe of Grade AISI 304 fixed to glass shutter complete all as specified and as directed. |
| 30 | S & F in repairs Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governingpivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 31 | S & F in repairsDoor closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36to 60 kg and fixed complete all as specified and as directed. |
| 32 | S & F factory made PVC frame of size 75x40 mm made out of extruded 4mm thickprelaminated PVC sheet reinforced with 15x15mm MS square tube of 19 gauge through out the frame and mitre cut and two corners and joined with two nos of 150mm long bracket of 10x10mm square tube. The door frame shall be fixed the wall using 65x100mm long MS screws through the frame by using PVC fastners min of four nos of screws to be provided horizontal member etc complete all as specified and as directed. |
| 33 | S & F 18mm thick PVC shutters with one side decorative lamination & other side balancing lamination, consisting of carcasses including all requiredbrackets, screws etc. and panels fabricated using adhesive and screws whereever required,edges covered with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer\"s specifications, as specified and as directed. |
| 34 | S & F 18mm thick PVC solid board with one side decorative lamination & other side balancing lamination, as in shelf / partitionall requiredbrackets, screws etc.and panels fabricated using adhesive and screws whereever required,edges covered with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer\"s specifications, as specified and as directed. |
| 35 | S & F Solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube fixed in opening including edges painted to match with printed sheet complete all as specified and as directed. |
| 36 | S & F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC \"C\" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°), and joined together with solvent cement fixing in frame at site as per specification complete all as specified and as directed. |
| 37 | S & F 100 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed. |
| 38 | S & F Continuous [Piano] Hinges, Mild Steel, Bright finish or Electrogalvanised and width of Flaps 30mm [When Open] complete all as specified and as directed. |
| 39 | S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed. |
| 40 | S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 41 | S & F 150mm long Aluminium anodised Handle, of extruded section Fabricated Type complete all as specified and as directed. |
| 42 | S & F in repairs Harrison Rails [Curtain Rails], AISI 304 Grade Stainless Steel with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 43 | S & F Aluminium Composite Panel sheet of 4 mm thick as in facias with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 3.5mm polyethylene core with PVDF coating of 30 micron fixed over Aluminium Frame Work of size 25mm x 25mm x 1.5mm thick fixed to panels with suitable fasteners/ Self Tapping Screws in approved pattern / size complete all as specified and as directed. |
| 44 | S & F Stainless Steel Railing made with Stainless Steel Pipes of wall thickness not less than 1.6mm, of Grade AISI 316L, standard quality, bright polish finish, using 50mm dia pipes for hand rail, 25mm dia pipes for vertical supports / balusters and 25mm dia pipes as in tie bars in three layers, SS tubes shall be welded at the turnings and junctions, welded portions shall be completely grinded and brought to bright and smooth finish including all bends, elbows, making holes in the floor / steps, grouting with epoxy to achieve full strength of railing complete all as specified and as directed. |
| 45 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 46 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 47 | S & F Mild Steel work confirming to Fe - 290, Grade E-165, as in framed work such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed. |
| 48 | S & F plain galvanised iron sheets of 0.63 mm thick with grade of zinc coating 275, asin Ridges, Hips, Valley Gutter, drip and straight flashing complete all as specified and as directed. |
| 49 | S & F 25mm thick Pre-formed filler for expansion/ crumple jointscut to size as required nad inserted in position all as specified and as directed. |
| 50 | S & F 12mm thick Medium Density Fibre Boards, exterior grade, as in False Ceiling including provision of Anodised Aluminium snap grid frame work with panel size of 600 X 600 mm, Aluminium \"T\" section of size 38 X 25 X 1.50 mm thick as Main Runners, 25 X 25 X 1.5 mm thick as Cross Runners and Aluminium Angle of size 25 X 25 X 1.50 mm thick as wall supports, including 4 mm dia Galvanized mild steel wire as in suspenders of frame work and fixing of building boards in proper position with suitable screws including dismantling of Wall & Ceiling Boards [Fibre / Pulp / Insulation etc] of any description including frame work and cover fillets, etc. complete all as specified and as directed. |
| 51 | M & L for 100 mm thick PCC 1:2:4, Type B-2, using 40mm graded aggregate as in sub base complete all as specified and as directed. |
| 52 | M & L for Vitrified Tiles, Double Charged, Coloured, Premium Quality, of size not exceeding 0.36 Sq.m, 9 to 10 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 53 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 54 | M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 350 mm or 350 mm x 250 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 55 | M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed andpointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabsincluding screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4complete all as specified and as directed.Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves. |
| 56 | M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Skirting, Dado, Risers of Steps, Jambs, Pillars, Wall Lining [Veneering to Wall] etc. with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including diagonals, inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed andpointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs over backing coat of 10mm thick in Cement Mortar 1:3complete all as specified and as directed. Note: Single stone slab shall be used for entire height of Skirting / Dado / Risers and joints shall match with the flooring. |
| 57 | M & L for Inter Locking Paving Blocks of 80mm thick, made with M40 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern, shape and size conforming to IS - 15658 set in floors complete all as specified and directed. |
| 58 | M & L for 75mm thick PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth with out using extra cement and providing 12mm thick joints for full depth of PCC at every 3.00 m and every change of direction duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade of any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 59 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 60 | M & L for rendering to Stone masonry surfaces/ other than fair faces of brick work, 15 mm thick in Cement Mortar 1:6 and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. |
| 61 | M & L for rendering 5mm thick in cement mortar 1:4 including mixing water proofing compound as per manufacturers instructions over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfacesand finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compoundwill be measured and paid separately. |
| 62 | M & L for preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed. |
| 63 | M & L for preparation of old decorated surfaces of ceilings including brooming down or steel wire brushing and applying two coats of white wash complete all as specified and as directed. |
| 64 | M & L for preparing newly plastered wall surfaces by using vaccume based sanding machineandapplying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling over 1mm thick Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfacescomplete all as specified and as directed.Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 65 | M & L for Complete removal of existing treatment of any description on wallsurfaces by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over 1mm thick Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfacescomplete all as specified and as directed.Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 66 | M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty on newly plastered walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections including rubbing with sand paper to obtain a smooth surfacecomplete all as specified and as directed.Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 67 | M & L for Complete removal of existing treatment of any description on walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections by using vaccume based sanding machine, removal of nails including rubbing with sand paper to obtain a smooth surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty complete all as specified and as directed.Note:- The contractor shall carryout Weather proof Exterior Emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof Exterior Emulsion Painting through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 68 | M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed. |
| 69 | M & L for one coat of Synthetic Enamel paint on old painted steel surfaces over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed. |
| 70 | S & F Rotational Moulded Polythene [HDPE] Water Tanks, Double Layered, ISI Marked, Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including dismantling and taking out existing unserviceable PVC tanks of any description and capacity complete all as specified and as directed. |
| 71 | S & F in repairs Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe etc complete all as specified and as directed. |
| 72 | S & Fin repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 73 | S & F 16 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., concealed in walls/ ceiling including testing, taking down of existing unserviceable GI pipes and connections of any description complete all as specified and as directed. |
| 74 | All as described in item No. 73 herein before but 20 mm outer diameter CPVC Pipes |
| 75 | All as described in item No. 73 herein before but 25 mm outer diameter CPVC Pipes |
| 76 | S & F in repairs Bib Taps, 15 mm dia, Brass Chromium Plated, Long Body, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified and as directed. |
| 77 | S & F in repairsStop Valves/ Angle cocks, 15 mm bore dia of pipe, cast copper alloy, Chromium Plated, Fancy Type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and as directed. |
| 78 | S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe and fixed completeall as specified. |
| 79 | S & F in repairs Health Faucet, ABS body, including 1.25 m long flexible tube, ABS wall hook, non return valve complete all as specified. |
| 80 | S & F in repairs Two way Bib Cock, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified. |
| 81 | S & F in repairs Overhead shower rose of size 125mm, Brass CP with or without swivel joints, fixed to CPVC pipe complete all as specified and as directed. |
| 82 | S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed. |
| 83 | S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC Connection of PTMT complete all as specified and as directed. |
| 84 | S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, including 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of lowor high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMTcheck nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and \"P\" or \"S\" trap complete all as specified and as directed. |
| 85 | S & F in repairs Vitreous China Urinal, Half Stall Type, Flat Back, White, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, 32mm bore PVC flexible waste pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc., grating and union for discharge pipe, brass CP urinal spreader, CP screws etc. complete all as specified and as directed. |
| 86 | S & F in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 87 | S & F in repairs 100mm dia PTMT grating for Floor Traps complete all as specified and as directed. |
| 88 | S & F in repairs PVC [SWR] Floor Trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 89 | S & F in repairs PVC [SWR] gully trap 125/110 mm, setting and jointing with solventcement complete all as specified and as directed. |
| 90 | S & F75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in trenches or in floors complete all as specified and as directed. |
| 91 | S & F110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in trenches or in floors complete all as specified and as directed. |
| 92 | S & F75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc.,complete all as specified and as directed. |
| 93 | S & F110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc.,complete all as specified and as directed. |
| 94 | S & F 75 mm bore UPVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed. |
| 95 | S & F 110 mm bore UPVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed. |
| 96 | S & F 110 mm bore UPVC [SWR] branch piece, Single [Single \"Y\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 97 | S & F 75 mm bore UPVC [SWR] Junction Single [Single \"T\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 98 | S & F 110 mm bore UPVC [SWR] Junction Single [Single \"T\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 99 | S & F in repairs Stainless steel kitchen sink with draining board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated,and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. |
| 100 | M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed. |
| 101 | M & L for 150mm bore RCC pipes, NP3, laid in trenches with collars and jointed in cement mortar including testing all as specified and as directed. |
| 102 | Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 103 | Taking down carefully submain wiring of any description and size complete including wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 104 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, Two runs, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Metal GI Flush Box of suitable size and thickness including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Pointcomplete all as specified and as directed.Note: The rate quoted shall be deemed to include cost of cutting chases not exceeding 10 cm girth, pinning in brick walls and making good in cement mortar as required. |
| 105 | All as per Serial Item No. 104 above but one 3 PinSocket Outlet 6 Ampson independent board, complete all as specified. |
| 106 | All as per Serial Item No. 104 above but One 3 Pin Socket Outlet 6 Amps on same Board complete all as specified. |
| 107 | All as per Serial Item No. 104 above but one 3 PinSocket Outlet 16 Amps power point on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor. |
| 108 | S & F Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 109 | S & F Switch Modular type, one module, Single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed. |
| 110 | S & F Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts, complete all as specified and as directed. |
| 111 | S & FSocket Outlet, 3 pin, 16 Amps cum 3 pin 6 Amps, Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed. |
| 112 | S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 113 | S & F Ceiling Rose, PVC Body, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. |
| 114 | Taking down existing Switches, Sockets, Fan regulators, Regulators, Bell push, Ceiling rose, etc. of any description and type including refixing the same in position by providing new screws, nails, etc. including connecting up and testing complete all as specified and as directed. |
| 115 | M & L for Sub main wiring with 4 runs of single core 10 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 10 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as per existing complete all as specified and as directed. Note: 5 runs of 10 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit. |
| 116 | M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as per existing complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit. |
| 117 | M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as per existing complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit. |
| 118 | S & Fin repairs MCCB DB, VTPN, 4 Way, 415 Volts with DIN Channel, N3 Frame, Double Door with 250 Amps rated bus bar suitable for mounting MCBs and provision for MCCB as incomer complete all as specified and as directed. |
| 119 | S & F in repairs MCB DB, TPN, 4 Way, 415 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wallcomplete all as specified and as directed. |
| 120 | S & Fin repairs MCB DB, SPN, 12 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wallcomplete all as specified and as directed. |
| 121 | S & F in repairs SP & N Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed. |
| 122 | S & F MCB, TPN, 63 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. |
| 123 | S & F MCB, SPN, 6 to 32 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. |
| 124 | S & F MCB, SP, 6 to 32 Amps, 10 KA, C Curve, AC, 240 Volts, 50 Hz complete all as specified and as directed. |
| 125 | S & FMCCB415 V , 16 KA, 4 Pole, 125 Amps capacity complete all as specified and as directed. |
| 126 | S & F RCBO, DP, 30mA, 40/ 63A , 230 Volts, complete all as specified and directed. |
| 127 | S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1800 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 128 | S & F in repairs Square recess mounted Flat Panel LED Light fitting 2\" x 2\" size, not less than 3600 Lumens output, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 129 | S & F in repairs Square recess mounted Flat Panel slim LED Light fitting 160mm x 160mm x 16mm height, not less than 1200 Lumens output, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 130 | S & F in repairs Round recess mounted Flat Panel slim LED Light fitting 160mm Dia x 16mm height, not less than 1200 Lumens output, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 131 | S & F in repairs Energy efficient & Long life Security Light Luminaire, 35 Watt with Pressure die-cast Aluminium housing, IP 65 Protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 2.00 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 132 | S & F in repairs Integral LED Aviation Light comprising of aluminium housing with polycarbonate enclosure including standard fixing arrangements and connecting up complete all as specified and as approved. Note: Light fitting shall be of PF>0.95Make: Cat No. BGAV 302 LED of M/s. Bajaj or equivalent approved model in Philips/ Cropmton/ Havells |
| 133 | Taking down existing Light Fittings of any description and refixing the same after repairs to buildings, at same location or at new location including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including cleaning and carrying out minor repairs complete all as specified and as directed. |
| 134 | Taking down existing MCB/ MCCB Distribution Boards of any description and ways and refixing the same after repairs to buildings, at same place or at new place including connecting up and testing and making good disturbed surfaces complete all as specified and as directed. |
| 135 | S & F Exhaust Fan, 300mm Sweep, 1400 RPM, Metal Body, Heavy Duty with Double Ball Bearing, generally Conforming to IS-2312, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50 Hz, including Louvers Shutter / Grill / Guard, BEE 5 Star Rated and of approved colour including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and fixing in existing opening and making good the disturbed surface to match with existing and taking down existing exhaust fan of any description and depositing at MES Store Yard complete all as specified and as directed. |
| 136 | M & L for Taking down existing Ceiling Fan of any description and refixing the same after repairs to buildings at same location or at new location, connecting up and testing including provision of Spares such as Capacitor 2.5 Mfd, Bearings, Shaft Bushes, Capacitor, Cotter Pin, Clamps, Rubber Bushes, Nuts & Bolts, three core PVC insulated sheathed flexible copper conductor cable of size 1.5 Sq.mm, etc. as required including cleaning, greasing and spray painting with two coats of synthetic enamel paint of approved colour over a coat of zinc chrome primer after filling cavities with filler and complete all as specified and directed. Note: Rewinding of motors wherever required shall be measured and paid separately under relevant item of this BoQ. |
| 137 | M & L for rewinding of motors of Ceiling Fan of any capacity using super enameled copper conductor of suitable gauge including insulation, varnishing, packing and testing etc. complete all as directed. |
| 138 | Taking down indoor and outdoor units of Split Air Conditioner of any capacityand of any description carefully from its position including cleaning, carrying out minor repairs, providing new insulating to the copper pipe lines, topup/refilling the refrigerant gas if required and replacement of Nuts & Bolts etc. and re-fixing the same after repairs to buildings, at same location or at new location as directed including connecting up and testing complete all as specified and directed.Notes: [a] The Rate quoted by the contractor is deemed to be inclusive of safe custody of the Air Conditioers during B/R repair works including cleaning the AC units, carrying out minor repairs and making good any damages caused during the custody to match with the original fitting complete all as specified and as directed.[b] The rate quoted by the contractor is deemed to be inclusive of Provn of making holes/core cutting in wall for passing of PVC pipe for indoor/outdoor unit with provision of PVC pipe . |
| 139 | Supplying, laying and testing XLPE insulated and PVC sheathed, FRLS, armoured heavy duty underground cable, ISI marked with stranded aluminium conductor 1100 Volt grade of size 3.5 Core, 70 Sq.mm cross section suitable for earthed system,laid in floor / duct or fixed to poles / walls or drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc. complete all as specified and as directed. |
| 140 | Supplying, laying and testing XLPE insulated and PVC sheathed, FRLS, armoured heavy duty underground cable, ISI marked with stranded aluminium conductor 1100 Volt grade of size 3.5 Core, 50 Sq.mm cross section suitable for earthed system,laid in floor / duct or fixed to poles / walls or drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc. complete all as specified and as directed. |
| 141 | Supplying, laying and testing XLPE insulated and PVC sheathed, FRLS, armoured heavy duty underground cable, ISI marked with stranded aluminium conductor 1100 Volt grade of size 3.5 Core, 35 Sq.mm cross section suitable for earthed system, laid in floor / duct or fixed to poles / walls or drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc. complete all as specified and as directed. |
| 142 | Supplying, laying and testing XLPE insulated and PVC sheathed, FRLS, armoured heavy duty underground cable, ISI marked with stranded aluminium conductor 1100 Volt grade of size 4 Core, 25 Sq.mm cross section suitable for earthed system,laid in floor / duct or fixed to poles / walls or drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc. complete all as specified and as directed. |
| 143 | Taking down existing LT UG Cables of any description and size from any locationand refixing/ re-routing the same with suitable clamps/ saddles, etc.,connecting up and testing complete all as specified and as directed. |
| 144 | S & F in repairs GI Perforated Cable Tray of Size 100mm wide, 50mm Deep, made with 2mm thick Sheet, with Perforation not more than 17.5%, in convenient sections, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc.fixed to walls / ceilings with suitable size brackets/ clamps complete all as specified and as directed. |
| 145 | S & F in repairs GI Perforated Cable Tray of Size 50mm wide, 50mm Deep, made with 2mm thick Sheet, with Perforation not more than 17.5%, in convenient lengths, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc. fixed to walls / ceilings with suitable size brackets/ clamps complete all as specified and as directed. |
| 146 | S & F in repairs PVC perforated Cable Tray of Size 100mm wide, 50mm Deep, with Perforation not more than 17.5%, in convenient lengths, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc. completefixed to walls / ceilings with suitable size brackets/ clamps all as specified and as directed. |
| 147 | S & F in repairs PVC perforated Cable Tray of Size 50mm wide, 50mm Deep, with Perforation not more than 17.5%, in convenient lengths, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc.fixed to walls / ceilings with suitable size brackets/ clamps complete all as specified and as directed. |
| 148 | S & F in repairs Slotted PVC Panel Trunking System complete of size 80 X 80 mm including base, covers, partitions, trunking, body joint cover, all finishing accessories and mounting wiring accessories, end caps, T Bend, Flat Angle, Internal and External Bends complete all as specified and as directed. |
| 149 | Taking down existing GI/ PVC Cable Trays of any description and size from any location and refixing the same in old or new location with suitable accessories,connecting up and testing complete all as specified and as directed. |
| 150 | S & Fin repairs Single Pointed Air Termination Aluminium Rod 12 mm dia and 300 mm long including necessary fasteners fixed for Lighting Protection with necessary connections to earthing etc complete all as specified and as directed. |
| 151 | S & F in repairs Aluminium Strip of size 25 X 3.15 mm, fixed to walls / columns / beams etc with Saddles or porcelain blocks of 10mm thick spaced at 1.00m centre to centre including making grooves and fixing with brass screws etc. for roof conductors and down conductors above ground complete all as specified and as directed. Note: Hylam sheet block shall be in two pieces each 10mm thick, one fixed to base with brass screws and the other fixed over it with brass screws after fixing aluminium strip in the groove provided. |
| 152 | S & F in repairs Earth continuity conductor or main earthing lead made of GI Strip of size 32 X 6mm, fixed to wall on batten or recess or chases or burried in ground or fixed to poles or any other indicated situation including drawing through GI Pipe for earthing etc. complete all as specified and as directed. |
| 153 | S & F in repairs Earth continuity Conductor or main earthing lead made of Copper Strip of size 20 X 3mm, fixed to wall on batten or recess or chases or burried in ground or fixed to poles or any other indicated situationincluding drawing through GI Pipe for earthing etc. complete all as specified and as directed. |
| 154 | S & F in repairs Test Point Terminal Box of size 200 X 100 X 100mm made out of 2mm thick hot dip galvanised sheet, drilled and screwed including 6 Nos 15mm long hexagonal head screws, painting with two coats of specified color over a coat of red oxide zinc chrome primer complete with Test Point Terminal Block made of Gun Metal or Phosphorus Bronze of size 75 X 75 X 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw complete all as specified and as directed. |
| 155 | M & L for Earthing complete with Copper Earth Plate Electrode 600 X 600 X 3.15 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to Copper Strip of size 20 X 3mm [Earth Lead] and GI pipe 40 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed. |
| 156 | Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 25 X 4mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. including taking down of existing earthing set complete all as specified. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
