}

Tender For Repair / Replacement Of Ac Roof Sheet To Galvalum Sheet, Ac Plain Ceiling Board To E-Board Ceiling And Other Connected Items At Sector I To Iv At Charduar Under Ge (N) Tezpur., Tezpur-Assam

Military Engineer Services-MES has published Tender For Repair / Replacement Of Ac Roof Sheet To Galvalum Sheet, Ac Plain Ceiling Board To E-Board Ceiling And Other Connected Items At Sector I To Iv At Charduar Under Ge (N) Tezpur.. Submission Date for this Tender is 20-01-2024. Building Work Tenders in Tezpur Assam. Bidders can get complete Tender details and download the document.




Tender Notice

41419407
Tender For Repair / Replacement Of Ac Roof Sheet To Galvalum Sheet, Ac Plain Ceiling Board To E-Board Ceiling And Other Connected Items At Sector I To Iv At Charduar Under Ge (N) Tezpur.
Open Tender
Indian
Assam
Tezpur
20-01-2024

Tender Details

Tender For Repair / Replacement Of Ac Roof Sheet To Galvalum Sheet, Ac Plain Ceiling Board To E-Board Ceiling And Other Connected Items At Sector I To Iv At Charduar Under Ge ( N ) Tezpur.

Key Value

Document Fees
INR 500 /-
EMD
INR 90000.0 /-
Tender Value
INR 45 Lakhs /-

BOQ Items

Name of Work: Repair / Replacement of AC roof sheet to Galvalum sheet, AC plain ceiling board to E-board ceiling and other connected items at Sector I to IV at Charduar under GE (N) Tezpur.
Sl. No. Item Description
1Dismantling of plain or corrugated steel sheeting, any gauge, thickness including any pattern roof coverings complete all as specified and as directed.
2M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
3M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
4Dismantling timber scantlings in unframed works, 40 sqcm and over in section, in any position complete all as specified and as directed.
5S&F second class HW plain,solid,straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints complete allas specified and directed.
6S &F second class hardwood plain,solid ,straight,chowkats and frames,wrought, framed rebated on the solid ,rounded or chamfered,put together with glue pinned at joints, complete in all respect as specified and directed.
7Dismantling wooden fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section in unframed works, in any position complete all as specified and as directed.
8M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc13 sq.cm & n exc 25 sq.cm)as in studs of ceiling / sunshed complete all as specified and directed.
9S & F second class hard wood plain fillets square, rectangular or triangular in section, clean sawn secured with nails, cross sectional area exceeding 13Sq.cm but not exceeding 25 Sq.cm complete all as specified and as directed.
10M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,wrought ,secured with nails or bradsbut (sectional area exc 3 Sqcm &n exc 6 sq.cm) in filet etc complete all as specified and directed.
11Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and as directed.
12M&L for 2nd class hard wood 40mm thick clean sawnas in joist of ceiling complete all as specified and directed
13M&L for 20mm thick secondclass hardwood planed at both sides boarding as in eaves boards complete all as specified and directed
14Dismantling ceiling boards (Fibre/Pulp/Plywood) any thickness including cover fillets complete all as specified and directed.
15M & L for anodised GI snap (Size of grid 605mm x 605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing all complete all as specified and as directed.
16S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board)fixed in aluminium snap grid frame work with screws complete all as specified and directed.
17M & L for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.
18M&L for 5 mm lnsulated PVC Wall Lining consisting of PVC Insulated Panelswith Single Side Prelam PVC sheet used in-stead of plain colour sheet duly fitted into the wall as per specifications and drawing
19Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
20M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.
21M & L for brushing neat cement slurry with 3.0 kg of cement per square meter complete all as specified & directed by Engineer-in-Charge.
22M&L Vitrified ceramic tiles 10mm polished area of each tiles n exc. 0.36 Sqm in floors and as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4, complete all as specified and directed by Engineer-in-Charge (Make Johnson/Kajaria)
23Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.
24M & L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.
25M & L brick work except brick straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.
26M & L for brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
27Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water etc, complete all as specified and as directed.
28M& L for rendering/plastering 15 mm thick in cement mortar 1:6 on faces of brick or concretesurfaces and finished the surface even and smooth without using extra cement complete in all respect as specifified and directed.
29M & L for rendering 15 mm thick on fair face of brick wall or concrete surfacein cement mortar1:4 mixed with WPC @ 3% (or as per manufaturers instruction) finished even and smooth without using extra cement, complete all as specified and as direted. (Note : WPC shall be measured and paid separately)
30Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed.
31S & F GI wire netting 0.90 mm dia and 13 mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed.
32Material and labour for plastering 10 mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:6 finished even and fair complete all as specified and as directed.
33Material and labour for plastering 10 mm thick on the other side of lathing (on vertical surfaces) in cement mortar 1:6 finished even and fair complete all as specified and as directed.
34Supply only liquid water proofing compound complete all as specified and as directed.
35Supply & fix sheet glass, ordinary quality, 3 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
36S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
37Preparation of newly plastered surfaces on walls and applying three coats of colour wash complete all as specified and as directed.
38Preparation of newly plastered surfaces on ceilings and applying two coats of white wash complete all as specified and as directed.
39M&L for preparation of new plastered or undecorated surfaces of wall using wall care putty to fill the voids and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.
40M & L for preparation of new plaster surface of walls etc and applying two coats of acrylic washable distemper over 1 mm thick wall care putty in two coats over a coat of primer (smooth bodied opaque finish surface) complete all as specified and directed
41M & L for preparation of new or previously untreated wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
42M & L for preparation of new or previously untreated wood or wooden surfaces of any description, not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
43Dismantling of wrought or mild steel work of any description such as in ladder work, bracing/supporting agle iron, roof top MS sheets, railings etc omplete all as spcified and directed
44S & F MS steel work in /rectangular trusses/angle and posts/purlin including special shaped washersetc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 withone shop coat of zinc chromate primer paint as in gates post purlin etc complete all as specified and directed.
45Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail