Military Engineer Services-MES has published Tender For Additional/Alternator Cum Spl Repairs To Bldg No T 136 T 22 T 05 T 06 Of Signal Regimnt At Kausani Under Ge Ranikhet.. Submission Date for this Tender is 30-01-2024. Building Work Tenders in ranikhet Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-01-2024 |
| Sl. No. | Item Description |
| 1 | BOQ ( Sch A ) B/R Works Taking down cement / lime plaster of any description on brick work or PCC block walling or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed |
| 2 | M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall surface complete all as specified and as directed |
| 3 | M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete all as specified and as directed Note:- WPC will be measured & Paid separately |
| 4 | Supply only integral water proofing compound complete all as specified and as directed |
| 5 | M&L for preparation of newly plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed |
| 6 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed. |
| 8 | M&L for preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of painted , plastered or un-plastered surfaces of walls and applying one coat of oil emulsion distemper white or tinted complete all as specified and directed. |
| 9 | M&L for preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of painted , plastered or un-plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 10 | M&L for preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of painted , plastered or un-plastered surfaces of wallsand applying one coat of weather proof exterior emulsion paint complete all as specified and directed. |
| 11 | M&L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 12 | M&L for preparation of old painted surfaces of steel and iron exc 10cm width or girth and applying one coat of synthetic enamel paint complete as in roof all as specified and as directed |
| 13 | M&L for preparation of old painted surfaces of steel and iron exc 10cm width or girth and applying one coat of synthetic enamel paint complete as in door/ gates,windows,railings,structural horizontal & vertical members/surfaces & similar work complete all as specified and as directed |
| 14 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & as directed. |
| 15 | Material & Labour for applying french polishing two coats on new or previously untreated surfaces of wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new work till to obtain the mirror finish look of the surface complete all as specified and directed. |
| 16 | Material & Labour for applying french polishing two coats on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work till to obtain the mirror finish look of the surface complete all as specified and directed. |
| 17 | Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) complete all as specified and directed. |
| 18 | Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and directed. |
| 19 | Taking down of shutters of any description not exc 1.0 Sqm eachcomplete all as specified and directed. |
| 20 | Taking down of shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and directed. |
| 21 | Resecuring or easing shutters of any description not exc 1 sqm each and adjusting with refixing in same opening with using of necessary arrengements complete all as specified and directed. |
| 22 | Resecuring or easing shutters of any description exc 1 sqm but not exc 2 sqm each and adjusting with refixing in same opening with using of necessary arrengements complete all as specified and directed. |
| 23 | S&F 2nd class Hard Wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, And making good with existing surface as complete all as specified and directed. |
| 24 | S&F 40 mm thick (batten thickness ) IInd class hard wood, plain framed, panelled shutter (Any numbers of pannel) ofwith pannel of timber flat on both sides (feather edges) or 12 mm thickveneered particle board medium density wood particle board with commercial face veneerscomplete as specified and directed. |
| 25 | M&L Mild steel work in framed work such as grills, gratings, guard bars etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 27 | S&F sheet glass ordinary quality & glazing with wooden bead/oil puttyin Square n.exc 0.5 Sqm in each panel 3 mm thick complete all as specified and directed. |
| 28 | S&F sheet glass ordinary quality & glazing with wooden bead/oil puttyin Square n.exc 0.5 Sqm in each panel 5.5 mm thick complete all as specified and directed. |
| 29 | S&F figured toughened glass 12 mm thick fixed to wooden frame of doors and wall, packed with rubber beading complete all as specified & directed |
| 30 | S&F plain toughened glass 12 mm thick fixed to wooden frame of doors and wall, packed with rubber beading complete all as specified & directed |
| 31 | Supply and fixing 75 mm butthinges medium weight cold rolled mild steel ISI markedfixed with wooden screws complete as specified and directed. |
| 32 | Supply and fixing 100 mm butthinges medium weight cold rolled mild steel ISI markedfixed with wooden screws complete as specified and directed. |
| 33 | S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised,fixed with reqd screws complete all as specified & directed. |
| 34 | S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised,fixed with reqd screws complete all as specified & directed . |
| 35 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 36 | M&L for aluminium anodised barrel tower bolts of extruded section, with length of bolt 150 mm (ISI marked) fixed complete fixed with screws complete all as specified and directed. |
| 37 | S&F extruded Brass handles 150 mm , fabricated type polished complete all as specified & directed. |
| 38 | M&L butt hinges 100 mm, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified & directed. |
| 39 | M&L Brass sliding door bolt 300 mm with sand or die cast brass hasp, staple (bolt type) and fixing bolt withrolled or drawn brass bolts and fixed complete all as specified & directed. |
| 40 | M&L brass barrel tower bolts 150 mm, with cast or sheet barrel and rolled or cast bolts, fixed complete all as specified & directed. |
| 41 | Dismantling of boarding , any description fixed in any position complete all as specified and directed. |
| 42 | S & F Second class hardwood 25 mmboarding plain one side with butt joint fixed with nails in any situation complete all as specified and directed. |
| 43 | Refixing old retrieved wooden boarding 25mm and in any situation complete all as specified & directed. |
| 44 | M&L for MS channels 30mmX20 mm fixed to wooden doors including rollers,screws for fixing etc complete all as specified & directed. |
| 45 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed. |
| 46 | M&L for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxideprimer complete all as specified and directed. |
| 47 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 48 | S & F powder coated GI Everest ceiling grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the Main Tee 28x24x3mm thick, Cross Tee 28x24x3mm thick and Wall angle 24x24x3mm thick sections complete all as specified and directed |
| 49 | S & F 4 mm thick designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 600 X 600 mm size fixed with staples on snap grid timber/GI/aluminium framework with screws as in ceiling complete all as specified and directed |
| 50 | M&L for solid PVC wall lining consisting of 5.00mm thick single site prelam PVC sheet inclusive of insolvent cement and fixing at site on PVC frame all as specified and directed |
| 51 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame all as specified and directed. |
| 52 | S&F in repair 25 mm dia harrison rails/Drapery Rod fancy type of mild steel with duly powder coated wood finished fixed with end brackets with other connected accessories complete all as specified and directed. |
| 53 | S&F 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer"s instructions including taking down old wooden flooring with or without plywood complete all as specified and directed. |
| 54 | All as per item No 53 above but except material complete all as specified and directed. |
| 55 | M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair of any thickness complete all as specified and directed. |
| 56 | Dismantling timber scantlings 40sq. cm and over in section, in framed work complete all as specified and directed . |
| 57 | M&L for timber framed andfixed second class hard wood clean sawn second class hard wood in scantlings vertical & horizontal members completeall as specified and directed. |
| 58 | All as per item No 57 above but except timber. |
| 59 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed |
| 60 | Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed |
| 61 | Supply and fix 15 mm bore galvanized steel water tubing, medium grade including necessary GI fittingssuch as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all asspecified and as directed |
| 62 | Supply and fix 20 mm bore galvanized steel water tubing, medium grade including necessary GI fittingssuch as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all asspecified and as directed |
| 63 | S&F in repair vitreous china wash down water closet pan (padestal pattern) with seat cover (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed. |
| 64 | S&F in repair flushing cistern 10 Ltr capacity PVC valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified & directed. |
| 65 | S&F in repair for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 66 | S&F in repair vitreous china wash basin Ovel typesize 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed |
| 67 | S&F in repair 15 mm dia bib tap cast copper alloy, fancy type chromium plated ,"with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed |
| 68 | S&F in repair fancy type 15 mm dia Pillar taps ,cast copper alloy , with capstan heads chromium plated screwed down high pressure, with or without letterd HOT or COLD with long screwed shanks and fly nuts ,screwed for iron pipe and fixed complete all as specified and as directed |
| 69 | S&F in repair brass CP Stop valve/ Angle valve 15 mm fancy type with long shank and cup fixed complete all as specified and as directed . |
| 70 | S&F in repair soap dish tray embedded in wall , vitreous china white, approximate size 160x160x90 mm complete all as specified & directed. |
| 71 | S&F for PVC connection 15mm size with brass nuts of length 450mm complete all as specified & directed. |
| 72 | S&F in repair towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified & directed. |
| 73 | S & F in repairs15 mm bore Fancy type Telephonic Shower (Healthfaucet), Cast Copper alloy, with chromium plated, screwed down high pressure with or without lettered Hot or Cold with lenght not less than 1.0mtrlong screwed shanks and fly nuts, screwed for iron pipe/stop value and fixed as Cat No 455 of make- Prayag, Polytuf, R S Industries Delhi or equavalent as approved by GE. |
| 74 | S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed. |
| 75 | Demolition of brick masonry or precast PCC block masnory or stone masnory built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified & directed |
| 76 | M&L brick work with sub class "B" old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified & directed |
| 77 | M&L precast cement concrete 1:3:6 type C1(using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed. |
| 78 | Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and directed. |
| 79 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed self tapping screws complete all as specified and directed. |
| 80 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed. |
| 81 | All as per item No 79 above but except sheeting |
| 82 | Refixing old retrieved galvanised corrugated mild steel sheeting in roof complete all as specified & directed. |
| 83 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 84 | M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified & directed |
| 85 | M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified & directed |
| 86 | M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished area of each tile exc 0.18 sqm but not exceeding 0.36 sqm as in skirting etc laid over with and including backing coat or bedding layer of 10mm thick cement mortar 1:4 for laying wall/vertical finish, jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified & directed |
| 87 | M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in sub base to floors and paving etc complete all as specified & directed |
| 88 | M&L for Chequered cement concrete tiles glossy finished 25mm thick with mixture of white & grey cement in equal proportion and no pigment, set,area of each tile exceeding 0.05 sqm but not exceeding 0.09 sqm, jointed and pointed in near cement slurry in floors, laid over with and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified & directed |
| 89 | M&L for 100mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors,path and hardstanding and paving etc laid in bays including necessary form work complete all as specified & directed |
| 90 | M & L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cementlaid in bays including necessary form work complete all as specified and directed. |
| 91 | S&F cast iron floor trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed. |
| 92 | S&F in repair PVC (SWR) pipes 110 mm diasingle socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed |
| 93 | S&F in repair PVC (SWR) pipes 75 mm diasingle socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed |
| 94 | S&F PVC (SWR) plain bend 110 mm dia, of any redius with rubber ring joints, complete all as specified and as directed |
| 95 | S&F PVC (SWR) plain bend 75 mm dia, of any redius with rubber ring joints, complete all as specified and as directed |
| 96 | S&F cast iron nahani trap 75 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B1(using 20 mm graded stone aggregate) complete all as specified and directed. |
| 97 | BOQ ( Sch A ) E/M Works Taking down carefullyaluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed. |
| 98 | S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping/ PVC conduit pipeof suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size multi stranded (FRLS) copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. |
| 99 | All as per item No. 98 above but wiring for one 3 pin 5 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed. |
| 100 | All as per item No. 98 above but wiring for one 3 pin socket outlet 5 amps independent with cable 1.5 sq mm size. |
| 101 | All as per item No 98 above but wiring for one 3 pin 15 Ampere socket outlet point using 2.50 sqmm size multi stranded copper conductor cable (FRLS) and earth wire of PVC insulated ( green colour) 1.50 sqmm size multi stranded copper conductor cable (FRLS) on the independent board complete all as specified and directed. |
| 102 | S & F of Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 103 | S & F of Modular switch 1 way 16A,1 module complete all as specified and directed. |
| 104 | S & F of Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 105 | S & F of Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 106 | S & F modular bell push single pole 6 Ampere 1 module complete all as specified and directed. |
| 107 | S & F Bell Multi Music type complete all as specified and directed. |
| 108 | S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting completeall as specified and directed. |
| 109 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.. Note: The contractor shall submit 5 years warranty of LED lamp/bulb/tube |
| 110 | S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed. |
| 111 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Havells (Cat Part-LHEXARP7SN1W020) or equivalent in make C&S, Bajaj,Philips,Wipro, Eveready Note: The contractor shall submit 5 years warranty of LED lamp/bulb/tube |
| 112 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note: The contractor shall submit 5 years warranty of LED lamp/bulb/tube |
| 113 | S & F Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. Make : Havells Cat Part No LHFOAJE1TN1I060 or equivalent in make C&S, Bajaj,Philips,Wipro, Eveready Note: The contractor shall submit 5 years warranty of LED lamp/bulb/tube |
| 114 | S & F 9W LED TW B22 Smart Lamp complete all as specified and directed. Make : Havells Cat Part No LHLDAMED3A8R009 or equivalent in make C&S, Bajaj,Philips,Wipro, Eveready Note: The contractor shall submit 5 years warranty of LED lamp/bulb/tube |
| 115 | S & F 6W adjustable LED decorative bed side wall lamp with suitable blub 350 degree rotation 90 degree folding with complete accsories complete all as specified and directed. Make : Philips Cat Part No 581919 or equivalent in make C&S, Bajaj,Havells,Wipro, Eveready Note: The contractor shall submit 5 years warranty of LED lamp/bulb/tube |
| 116 | S & F of White cover plate with frame, 3 module complete all as specified and directed. |
| 117 | S & F of White cover plate with frame, 6 module complete all as specified and directed. |
| 118 | S & F of White cover plate with frame, 8 module complete all as specified and directed. |
| 119 | S & F of White cover plate with frame, 12 module complete all as specified and directed. |
| 120 | S & F 2x10.0 sqmm sub main wiring and 1x6.0 sq. mm earth wire for circuit/submain wiring alongwith earthwireof FRLS PVC insulated multi stranded copper conductor, single core cable in surface/recessed as required complete all as specified and directed. |
| 121 | S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 4 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 122 | S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 123 | S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 124 | S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, triple pole and neutral, 4 ways including blacking platge as required with 200 ampere rated bus bar, 415 volts fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 125 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 126 | Supply and fixing amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of single pole and neutral and current carrying capacity 40 to 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 127 | Supply and fixing 415V 10KA "B" curve miniature circuit breaker (MCB) of TPN and current carrying capacity 40 to 100 Amp in the TPN DB complete with connection testing and commissioning complete all as specified and directed. |
| 128 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp complete all as specified and directed. |
| 129 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 130 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. |
| 131 | M&L for earthing complete with galvanised steel, earth plate electode 600x600x6mm thick buried directly in gournd ( earth pit not less than 2.25mtrs below ground level ) with the top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts check nutsand washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 Part I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all-round the GI earth plate, watering pipe 20 mm dia GI medium grade, GI sheet 0.63 mm thick funnel, wire,gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round suitable lifting handle to cover, GI protection pipe 15mm dia "light grade" upto 7.5 Mtr from electrode etc, complete all as specified and directed including testing on completion. NOTE:-i)Earth lead beyond 7.5 m from electrode to earth terminal point/main switch board & GI pipe light grade 15 mm dia for protection against mechanical damage to lead shall be measured separately. (ii)On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 132 | Supply & Laying and fixing 50 Sqmm 3.5 core jointing connection and testing LT UG XLPE insulated PVC sheathed,armoured heavy duty 1100 volts grade stranded aluminium conductor cable confirming to IS laid in trenches/ducts/fixed on poles/wall/laid under road /culverts, encased GI pipe including dismentling the same all as specified & directed. |
| 133 | All as per item No 132 above but 10 Sqmm 2 core |
| 134 | Supply, fixing and laying 32mm GI tubes light grade ISI mark with all GI fitting and fixed with pole, wall and passing of cable as directed at site ( MS work such as clamps, nuts, bolts, shall be measured and paid separately)complete all as specified and directed. |
| 135 | Excavation in trenches in hard/dense soil not exceeding 1.5mtr in width and not exc 1.5mtr in depth for laying of cables and getting out incl jointing bottom surface to the required level/slope complete all as specified and directed |
| 136 | Returning, fillingin , including spreading levelingwatering and wellramming in layers not exceeding 25 cm in hard/ dense soil complete all as specified and directed |
| 137 | Removing excavated material (soil) to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr starting point complete all as specified and directed |
| 138 | Supply and laying of sub class "B"old size bricks as in cable protection in trenches complete all as specified and directed. |
| 139 | M & L for laying of fine river sand, free from sharp materials ,cable cushioning in trenches all as specified and directed Note: The punned thickness of sand shall be measured and paid |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
