|
| 1 | Construction of Shed for installation of new centralize AC plant for Danger Building No.93,94,95 & 96 at Primer Filling (Danger Building area) inside Ordnance Factory Varangaon |
| 2 | Surface dressing in soft loose soil n exc 15 cm deep including removing of grass and bushes etc complete as per SSR. |
| 3 | Excavating in post holes (or similar holes) in hard dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface etc complete as per SSR. |
| 4 | Excavating over areas, in soft loose soil n exc 1.5 m deep and getting out & removing excavated material exc. 250 m but n exc. 500 m and depositing where directed etc complete as per SSR |
| 5 | M & L broken stone hardcore of gauge n exc 63 mm deposited, spread & levelled in layers n exc 15 cm thick, watered and rammed to a true surface etc complete as per SSR 2020. |
| 6 | Soling or sub base with 200mm & above size broken boulders or quarried stone, interstices filled, surface formed and rolled & consolidated to required gradient and camber etc complete as per SSR 2020. |
| 7 | Plain Cement Concrete in foundation , filling and mass concrete type C2 1:3:6 (40 mm Graded aggregate) etc complete as per SSR. |
| 8 | Reinforced cement concrete type B0 1:2:4 (12.5 mm graded) Foundations, including rafts and mass concreteetc completeas per SSR 2020. |
| 9 | Formwork to flat sides of concrete in plinth or ground Beams with Rough finish surfaces of concrete etc completeas per SSR 2020. |
| 10 | Deformed or twisted mild steel bars 10mm dia & over cut to length bent to shape required including crank by bending spirally for hooping for column , hooking ends & binding with steel wire etc completeas per SSR 2020. |
| 11 | ditto as above item but steel bars 6mm to 8mm dia , quality conforming to etc completeas per SSR 2020. |
| 12 | Formwork to sides of concrete of beams, cantilevers, lintels, copings including supports, overhang also splays between floors and beams etc complete as per SSR 2020 |
| 13 | Reinforced cement concrete type B0 1:2:4 (12.5 mm graded) in lintels upto 1.5m clear span, cills, steps; seismic, copings, kneelers, apextones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed etc complete as per SSR 2020. |
| 14 | M&L, Forming 12mm thick Expansion joints, in 100 mm thick concrete, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, etc. complete as per SSR 2020. |
| 15 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc completeas per SSR 2020. |
| 16 | M & L , applying one coat of red oxide & two coat of oil paint etc completeas per SSR 2020. |
| 17 | S & F, Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa or polycarbonate sheet as in roof covering/cladding to wall, fixed with self tapping screws as specified, etc complete as per SSR 2020. |
| 18 | S & F 110 mm PVC (SWR) pipe single sockted in any length with rubber ring joints fix to floor or laid in trenches etc complete as per SSR 2020. |
| 19 | Brickwork in 1:4 cement mortar with subclass \"B\" Bricks exc 6 m mean etc completeas per SSR 2020. |
| 20 | Rendering 15 mm thick in 1:4 cement mortar on fair faces of brick work & concrete surfaces even & smooth etc completeas per SSR 2020. |
| 21 | M & L , Preparing surface plastered or unplastered. New surface brooming down or steel wire brushing applying one coat for priming with alkali resistence priming paint & two coat of OBD to walls etc completeas per SSR 2020. |
| 22 | Preparing surfaces plastered or unplastered on walls including brooming down, scrapping down & applying one coat primer with two coats of cement paint, etc complete as per SSR 2020. |
