Military Engineer Services-MES has published Tender For Additional/Alternator To Building No P/82 At Af Station Bhowali.. Submission Date for this Tender is 27-01-2024. Building Work Tenders in Nainital Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-01-2024 |
| Sl. No. | Item Description |
| 1 | S&F GI snap grid frame work (Grid size 605cm x 605cm) for false ceilingconsisting of main runner "T" of size 24mm x 32mm and 0.3mm thick , Secondary runner "T" of size 24mmx25mm and 0.3mm thick,GI angle24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 2mm dia GI wire hanging from existing purlins /roof slab with butterfly clipsincluding Gypsum ceiling tilesof size 595 x 595 x 4 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap gridcomplete all as specified and directed by Engr-in- Charge. |
| 2 | S&F Solid 4 mm thick ALCO panel sheet for Wall Panneling inclusive solvent/additive/silicon fixing at site on frame as per specifications and drawingcomplete all as specified and directed by Engr-in- Charge. |
| 3 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in- Charge. |
| 4 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories Area not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-charge. (Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 5 | Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-charge. |
| 6 | Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each |
| 7 | S&F Anodised aluminium powder coated of any colour,frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness or powder coating not less than 50 micron) complete all as specified and as directed by Engineer-in-charge. |
| 8 | S&F Anodised aluminium powder coated of Approved colour,door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. (Thickness or powder coating not less than 50 micron complete all as specified and as directed by Engineer-in-charge. |
| 9 | S&F5mm thick (minimum) glass sheet selected quality coloured/tinted/ground or obscured or frosted, on one sideand glazed in squares, n.exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. |
| 10 | S&F 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge. |
| 11 | M&L VitrifiedCeramic light shade tiles10 mm thick (square/ rectangular) polishedarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match , completeall as specified and directed. |
| 12 | M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed. |
| 13 | M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 14 | M&L Rendering cement plaster, 15 mm thick on fair faces of brick/concrete surfacesof wall in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified. |
| 15 | M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 16 | M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified. |
| 17 | M&L Rendering 10 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cementcomplete all as specified and as directed by Engineer-in-charge. |
| 18 | M&L Preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying three coats of white washingcomplete all as specified and as directed by Engineer-in-charge. |
| 19 | M&L for complete removal of existing treatment from surfaces of RCC/stone/concrete/brick walls of any description including preparation of scraped surface by removing all depressionand applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 20 | Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified. |
| 21 | M&L Brick work with subclass "B" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge |
| 22 | Demolition ofreinforced cement concrete of any discription and any position( ground to 4th floors) and removingthe rubbish from the work site out side defence premises complete all as specified. |
| 23 | M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specifiedand directed. |
| 24 | M&Lfor TMTmildsteel bars10mm dia and over, cutto length, bentto shape required, including cranking, bendingspirallyforhooping for column, hookingendandbinding withandincludingmildsteelwire(annealed) not lessthan0.9 mm dia or securing with clips, complete all as specified and directed. |
| 25 | M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed. |
| 26 | S&F 25mm dia, stainless steel curtain rods including brackets and latto complete all as specified and as directed by Engineer-in charge. |
| 27 | Dismantling of brick or brick tiles laid bedded and pointed in any mortar on roof including cleaning for refixing etc complete all as specified and as directed by Engineer-in-charge. |
| 28 | M&L for40 mm thick brick tiles bedded in CM 1:6 and joints grouted flush in Cement mortar (1:3) mixed with 5% of cruide oil by weight of cement tiles are bedded in Cement mortar (1:6), 15mm thick complete. |
| 29 | Fixing only any thickness brick tilesbedded in CM 1:6 and joints grouted flush in Cement mortar (1:3) mixed with 5% of cruide oil by weight of cement tiles are bedded in Cement mortar (1:6), 15mm thick complete. |
| 30 | M&L for cleaning ofold roof slab surfacesincludingsweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L for screed bed or bedding layerof mortar of 15mm thick, (Cement Mortar : 1:3)(b) M&L applying evenly a tack coat of industrial bitumen 85/25@1.20kg/sqm including cleaning surfaces .(c) M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven febric( weight not less than 150gm /sqm ) land on primed surface by tourched applicationr with 10cm over laps as requiredall completeall as specified and directed |
| 31 | Taking down carefully to existing copper/Aluminum point wiring (light,fan, socket or power) complete includingfittings such as switches, ceiling roses, pendents, regulators sockets, light fitting etc removiing materials to keeping in safe custody for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed. |
| 32 | Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) etc complete all as specified and directed. |
| 33 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. |
| 34 | Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through andincluding rigid PVC or PVC casing coping including earth wire complete all as specified anddirected. |
| 35 | M&L for point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistrand copper conductor 1.5 sq mm nominal cross sectional area, single core, PVC insulated and unsheathed FR-LSH cable 1100 volts grade ISI-694 marked with valid CM/L No drawn in concealed PVC rigid non metallic conduit including replacement of mild steel/pressed steel sunken box and outer sheet and provn of fixed concealed Modularsteelbox of required module for modular switches/sockets incl all screw cup washer used to brass etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FR-LSH cable as earth continuity conductor to common earth and connecting to earth dolly complete for light/ceiling fan/Ex-fan point controlled by one 5/6 amps one way switch complete all as specified and directed. (Note : Modular Switch / socket and fan regulator deem to be measured and paid separately in respective items). |
| 36 | One light point or one fan point controlled by one way, single pole switch |
| 37 | One 3 pin socket out let, 6 amps on the "same board" with other switches |
| 38 | One 3 pin socket outlet, 6 Amp on “independent board” |
| 39 | All as per item No.35 here in above butpoint wiring using 4 Sqmm (Nominal area) FR PVC insulated unsheathed copperconductor 1100 volts for one 3/6 pin socket outlet ,suitable for 6/16 amps on “independent board”.with 4 sqmm with one single run copper wire as continuous earth wireto common earth dolly complete. |
| 40 | S&F Modular switch 1 way 6A,1 module, 240 Volt, single pole , ISI marked conforming to IS 3854 style single colour series with complete all as specified and directed. |
| 41 | S&F Socket, 6A - 2/3 pin combined 2 module, 240 Volt AC, flush type, style single colour series with complete all as specified and directed. |
| 42 | S&F Switch Modular1 way 16A,1 module , 240 Volt AC, style with singlecolour series"complete all as specified and directed. |
| 43 | S&FModular socket outlet 6A/16 A -2/3 pin,combined 2 module, 240 Volt AC, style with singlecolour series"complete all as specified and directed. |
| 44 | S&F of White cover plate with frame, 3 module as specified and directed at site |
| 45 | S&F of White cover plate with frame, 6 module as specified and directed at site |
| 46 | S&F Exhaust fan against BER made of steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and asdirected. |
| 47 | S&F ceiling fans against BER complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and asdirected. |
| 48 | S&F ceiling rose surface bakelite 65mm c 50mm 2 to 3 terminals with back plate etc complete all as specified and directed by Engineer-in-Charge |
| 49 | S&F batten holder of PVC / Polycarbonate type surface including 9W LED bulb etc complete all as specified and directed by Engineer-in-Charge |
| 50 | M&L Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable colour Red,Black, and green conforming to IS 694 drawn through conduit in concealed and connected to common earth dollycomplete all as specified and directed. Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement. |
| 51 | S&F Factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar,SPN 8 way, 240V for fixing MCB"s complete all as specified and as directed. |
| 52 | S&F of MCB SPN ‘C’ Curve 10KA, SPN 40 to 63 AMP amps complete all as specified and directed . |
| 53 | S&F of MCB SP, 415V, 5-32 Amp C curve complete all as specified and directed.Make : Havells/Legrands/Hager/HPL |
| 54 | S&Fof sheet metal enclosure with two pin and earth plug and socket with metal top 230V with one single pole MCB of 20 Amp complete all as Specified and directed. Make - SSK or equivalent Havells/ABB/Legrand |
| 55 | S&F modular type blanking plate, 240 Volts, AC (ISI Marked) one module etc complete all as specified and directed. Make : Cat Pt No GR 1032 of SSK or equivalent ot Havells/Crabtree/Legrand |
| 56 | S&F in replacement of LED type flat panel ceiling light fitting 42 Watt capacity ultra modern designed architectural which provides soft light and glare free illumination suitable for 2"x2" ceiling grid as per Cat. Part No. PLANO2X2PLR42WLED857S of Havells or having same or superior specifications in Philips duly pre-fitted with all accessories with and including taking down old ceiling light fitting any type and description complete all as specified and directed. Make-Havells/Philips/Crompton |
| 57 | S&F for pride plus Inverter LED batten 20 Watt,6500 K, 230 Volt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours complete all as specified and directed by engineer-in-charge. make havells,cat part no LHEXACP7FN1W020 or equivalent in crompton/bajaj/wipro |
| 58 | M&L Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in groundpreferably vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanised iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe , including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size, charcoal and salt in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing on completioncomplete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
