Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Bill Of Quantities For Construction Of Switch Gear Control Room Building, Retaining/Boundary Wall, Switch Yard Fencing, Road(Approach & Internal), Gate, Tubewell Boring And Other Associated Civil Works At 33/11 Kv Sub Stations Under Aurangabad Urban Zone . Submission Date for this Tender is 15-01-2024. Building Work Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work.(CSI No. 4.01) |
| 2 | Excavation in foundation in soil mixed with moorum/ shingle/ kankar requiring the use of special T&P such as pickaxes, sabbals etc including lift upto 1.5m & lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of the foundation. (CSI No. 4.02) |
| 3 | Add to Earth work item (SI No. 4.01 to 4.02) for every additional 30m lead or part thereof or for every additional 1.5M lift or part there of. (CSI No. 4.04) |
| 4 | Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) |
| 5 | Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05) |
| 6 | Clearing jungle including uprooting of rank vegetations,grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08) |
| 7 | Concrete with 4cmgauge Ist class Stone ballast, coarse sand (FM 1.8 to 2.5) and cement in proportion of 12:6:1 in foundation and under floors and supply of all materials, labour, and T&P etc. required for proper completion of work (S.No. 5.02). |
| 8 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.05) |
| 9 | Precast cement concrete door sills, chaukhats boundary posts,shelves and similar small work with cement, approved coarse sand(F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast in the proportion 1:1.5:3, excluding reinforcement but including fixig the same in position including cost of all other material, labor and T&P . (CSI No. 5.22) |
| 10 | Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement,Chopan coarse sand (F.M. 1.8 to 2.5) and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18) |
| 11 | RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) |
| 12 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.24) |
| 13 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.27) |
| 14 | RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC pile caping, gantry walls/columnfoundations and RCC pedestals, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.15a) |
| 15 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in RCC T beam-slab, column and RCC wall excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (Only web of T or L beam shall be measured). (CSI No. 5.29) |
| 16 | First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) |
| 17 | First class brick work in 1:4 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.03) |
| 18 | First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in Super Structure 230mm including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01+6.07+6.08) |
| 19 | First class brick work in 1:4 cement and coarse sand(F.M.1.8 to 2.5) mortar in Super Structure 115mmincluding supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.03+6.09) |
| 20 | 2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand (F.M.1.8 to 2.5), and 3 parts approved 12 mm. graded stone grit and also including liquid water proofing material as approved by the Engineer-Incharge in the proportions specified by the manufacturer. (CSI No. 7.02) |
| 21 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
| 22 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) |
| 23 | Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. (CSI No. 9.18) |
| 24 | S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat. (CSI No. 9.22) |
| 25 | P/F Concertina coilfencing with required dia. 600 mm upto 3 M height of wall between existing angle iron "Y" shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary golts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter ( cost of MS angle, C.C. blocks shall be paid separately).(CSI No. 9.37) |
| 26 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) |
| 27 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09) |
| 28 | Add for extra labour and materials for plaster over rough face of one brick thick wall. (CSI No. 11.12) |
| 29 | 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and two parts of approved coarse sand laid in panels finished with 3mm.floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work. (CSI No.11.13) |
| 30 | Supply & mixing approved water proofing compound (CICO,DR FIXIT etc.) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) |
| 31 | Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. (CSI No. 11.16) |
| 32 | Making drip course (25x12) mm in 1:2 cement and course sand including supply of all materials, labour and T&P etc required for proper completion of work. (CSI No. 11.19) |
| 33 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.(cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 34 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC(CSI No. 12.04) |
| 35 | First class bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its ramming including supply of all material labour & T&P etc. required for proper completion of the work. (CSI No. 12.07) |
| 36 | Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.(CSI No. 12.12) |
| 37 | Providing and fixing glass strips of 3.15 mm thickness & 25mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. completion required for proper completion of work. (CSI No. 12.13) |
| 38 | Providing and laying18mm. thickKotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and T&P etc required for proper completion of the work. (CSI No. 12.17) |
| 39 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18) |
| 40 | S/F 10mm thickglazed/matt finish Fully Vitrified tiles of size 600x600 or more of approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by E/I in floor, skirting or dado laid with 1:3 cement and coarse sand mortar , finished with white cement and pigment to match the tiles shade etc.complete including supply of all materials, labour and T&P etc. required for proper completion of work. (S.N. 12.11A old) |
| 41 | Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. (CSI No.12.23) |
| 42 | Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) |
| 43 | Same as in item no. 13.01 but for every coat after the first coat.(S.No. 13.02) |
| 44 | Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25) |
| 45 | Same as above in item no. 13.25 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. (CSI No. 13.26) |
| 46 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
| 47 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) |
| 48 | Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23) |
| 49 | Laying cement concrete road slabconsisting of 1 part cement 1.5 part approved coarse sand and 3 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape,finishing with TRIMIX machine ,concrete hardner and making good to the satisfaction of E/I inclduing cost of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.13) |
| 50 | Filling of 20 mm. wide 100/150 mm. deep joint with coarse sand and saw dust mixed with hot bitumen etc. complete including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.14) |
| 51 | Analysis of Rate for Construction of granular sub-base (GSB) by providing well graded Materialspreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per the direction of Engineer In Charge. (Taking Output -300 Cum ) (CSI No. 18.17) |
| 52 | Drilling bore from G.L. to 90 M B.G.L., work to be completed as per direction of Engineer Incharge but for 150 mm dia. boring.(i) from 0 M BGL to 90 M BGL.(CSI No. 19.04H) |
| 53 | Providing110mm dia Plain PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work. (CSI No. 19.08) |
| 54 | Providing 110mm dia Slotted PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work. (CSI No. 19.10) |
| 55 | Supply and fixing of PVC top plug of heavy qualityincluding all labour material & T&P.(a)110 mm dia.(CSI No. 19.19) |
| 56 | Supply and fixing of PVC bail plug of heavy qualityincluding all labour material & T&P.(b)110 mm dia.(CSI No. 19.20) |
| 57 | Supply and fixing of 1.2m long holding support clamps for 300mm to 100mm dia tubewell pipes made out of MS flats, pairs of bolt-nuts etc. complete with all material, labour, T&P. (CSI No. 19.21) |
| 58 | Supply and stacking pee gravel properly at levelled ground for measurement as directed by Engineer I/C, including all labour, T&P required for proper completion of work. (CSI No. 19.25) |
| 59 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31) b) for 1.5/ 2 H.P pump set single phase |
| 60 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.32)c) for 2 H.P pump set single phase |
| 61 | Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect. (CSI No. 19.33)c) 4.0 mm2 for pump above 3 HP and up to 7.5 H.P. |
| 62 | Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34) |
| 63 | S/F of renewing panes of 4.8 to 5.7mm glass including supply of glass with putty and brads including supply of all materials, labour and T&P etc. required for proper completion of the work.(b) glass of 4 mm thick panes. (CSI No. 20.04) |
| 64 | Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. (CSI No. 20.11) |
| 65 | Wiring point for light with 1.50 Sq.m.m FR PVC isulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall 14 SWG copper PVC coated Earth continuity wire and approved quality piano type switch, ceilling rose/angle/batten holder on 3mm thick phenolic laminated bakelite sheet etccomplete in all respect as directed including matching colour wash(old CSI.No. 21.01) |
| 66 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable PVC conduit pipe concealed in the wall 14 SWG copper PVC coated Earth continuity wire and approved quality piano type switch, ceilling rose as per approved sample on 3mm thick phenolic laminated bakelite sheet etccomplete in all respect as directed including matching colour wash (Old CSI.No. 21.03) |
| 67 | Wiring point for Plug with 1.50 sqmm FR PVC insulated multistrand single core copper conductor cable PVC conduit pipe concealed in the wall 14 SWG copper PVC coated Earth continuity wire and approved quality piano type switch and socket complete in all respect as directed including matching colour wash (Old CSI.No. 21.04) |
| 68 | S/Wiring of submain with two number 4.0 sqmm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with one no. 2.5 sqmm FR PVC insulated multistrand copper conductor cable as earth continutiy wire including matching colour wash etc. (Old CSI No. 211c) |
| 69 | Supply and bourying of 40mm dia 4.5 metres long GI Pipe vertically for earthing having 12 mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.-6 to 8 SWG GI wire in GI pipe up to appron and from appron to switch board (the cost of GI wire and pipe will be extra) 30 cm square CI box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal, coke and salf at least 150mm thick all round etc. as per directions of E/I complete in all respects as per drawing (Old CSI.No. 21.16) |
| 70 | S/F of 6/10/16/20/25/32 Amp. MCB of approved make and as per sample approved by E/I (10 KA) (Old CSI.No. 21.18) |
| 71 | S/F surface/flush mounting 4 way SPN distribution board without MCB complete in all respect as per direction of E/I (Old CSI.No. 21.19) |
| 72 | S/F of power plug with 15A/240V flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mmX100mmX50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer (Old CSI No.21.20) |
| 73 | S/F hexagonal fan box with hexagonal side of approx 80 mm in length fabricated from 16 SWG MS sheet incorporating 10 mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work. (Old CSI.No. 21.22) |
| 74 | Providing and fixing 15mm dia ISI approved CPVC pipes complete with special fittings such asbend, tee, socket, cross, clamps etc. earthwork including filling the trenches etc. requiredfor proper completion of the work. The rate also includes concealed GI fitting where required, cuttingand making good the walls etc. and all material, labour, T&P complete. (CSI No. 26.19) |
| 75 | Same as in item (CSI No.26.19), but dia 20mm. (CSI No. 26.20) |
| 76 | Same as in item (CSI No.26.19), but dia 25mm. (CSI No. 26.21) |
| 77 | Same as in item (CSI No.26.19), but dia 32mm. (CSI No. 26.22) |
| 78 | P/F GI UNIONS NOMINAL BORE 15mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.10a) |
| 79 | Same as in item (CSI No.26.10a), but for 20mm dia (CSI No. 26.10b) |
| 80 | Same as in item (CSI No.26.10a), but for 25mm dia (CSI No. 26.10c) |
| 81 | Providing and fixing CP BRASS BIB COCK 15 mm dia. HEAVY QUALITY ( 200gm) ( L&K or equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16b) |
| 82 | CP BRASS stop COCK 15 mm dia. ( 200gm) ( L & K and equi.) (CSI No. 26.16d) |
| 83 | CP BRASS Piller cock HEAVY QUALITY ( L&K or equi. )(CSI No. 26.16j) |
| 84 | P/F half turn 15 mm dia Gate Valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05a) |
| 85 | Same as in item (CSI No.26.05a), but for 20mm dia (CSI No. 26.05b) |
| 86 | Same as in item (CSI No.26.05a), but for 25mm dia (CSI No. 26.05c) |
| 87 | Providing and fixing PVC CONNECTION PIPE, 450X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09b) |
| 88 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completioon of work. (CSI No. 26.12) |
| 89 | Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) without "P" trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) |
| 90 | Providing and fixing flat back 430X370X340mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.06) |
| 91 | Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.08) |
| 92 | Providing and fixing 600 mm x 450 mm size beveled edge mirror of atul, kiran make glass with indian polish 6.5mm thick complete with back of 600mm x 450mm x 6mm hard board seat fixed to wooden cleats with CP Brass screw and washers including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.15) |
| 93 | Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved quality including brackets including supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. (CSI No. 27.16) |
| 94 | Providing and fixing 10 littres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) |
| 95 | Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21) b asabove but for 100 mm.PVC trap. |
| 96 | Providing and fixing 100 mm dia white glazed "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.23) |
| 97 | Providing and fixing CI GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) |
| 98 | Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C. (CSI No.28.11) |
| 99 | Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing Sheet (CSI No. 28.30) |
| 100 | Supply and fixing of 3 blade ceiling fan 1200mm of havellsor equivalent including supply of all materials, labour and T&P etc requried for proper completion of the work as approved by Engineer Incharge.(CSI No.28.39 ) |
| 101 | Supply and fixing of 32-63A 240 Volts IC cut out or approved make on the meter board or polished MDFEG /Teak wood board complete in all respect.(NSI) |
| 102 | S/F of CFL Tubes 25 watt of PHILIPS or equivalent make as approved sample and make as per direction of Engineer in charge (Old CSI.No. 22.68b) |
| 103 | Supply & Fixing of Zinc/Aluminium Alloy coated high tensile steel sheet of 0.50mm thickness have minimum yield strength of 550 MPA with a profile width of 1072mm & efective width of 1015mm of Durashine TATA Blue Scope roof & wall sheets as per approved shade & sample by Engineering-In-Charge in position on trusses including supply of maerials, labour T&P etc. (NSI) |
| 104 | Rendering, smoothening and proper finishing with cement mortar/slurry (mortar 1:2 cement and coarse sand) in horizontal and vertical surface of foundations/roof etc. as per direction of E/I inclduing supply of all material labour and T&P etc. required for proper completion of wrok. (Old CSI No. 29.22N) |
| 105 | Providing and fixing of110mm Dia PVC Pipe 6Kg/sq.cm for water supply with specials such as tee, bend, socket, elbow etc. includingsupply of all material, labour, T&P etc. complete required for proper completion of work.( CSI No.26.17) |
| 106 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. PWD 2018/1406 CAT-AA |
| 107 | Providing and lowering of 40 mm dia. uPVC column pipe Finolex/Ashirwad or equivalent make with column coupling socket etc. including cutting the pipe of required length, proper jointing the same including cost of all materials, labour, T&P etc required for proper completion of work.(NSI) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
