National Aluminium Company Limited-NALCO has published Tender For Extension Of Existing Multi Propose Hall At Delhi Public School, Nalco Township, Damanjodi. Submission Date for this Tender is 19-01-2024. Building Work Tenders in damanjodi Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 2.6.Earthwork in Excavation by mechanical means (Hydralic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatlydressed. |
| 2 | 2.6.1.All type of Soil |
| 3 | 2.25.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 4 | 2.27.Supplying and filling in plinth withsand under floors, including watering, ramming consolidating and dressing complete. |
| 5 | 4.1.Providing and laying plain cement concrete (using Nowrangpuror approved quality sand)at all depths below ground level,and up to plinth level, in foundations, fillings, non-suspended floors,for flooring,septic tank,plinth protection,pavement, including tamping, dewatering, curing etc. But excluding the cost of centering and shuttering etc. as specified or directed by Engineer-in-Charge.in any shape, position, thickness and finishing the top surface rough or smooth etc. all complete[CEMENT WILL BE ISSUED FREE OF COST AT NALCO"S STORE] |
| 6 | 4.1.8.1:4:8 (1 Cement : 4 coarse sand (Zone-III): 8 graded stone aggregate 40mm nominal size) |
| 7 | 4.17.Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. (CEMENTSHALLBEISSUEDFREE OF COST FROM NALCO"S STORE). |
| 8 | 50 mm thick of cement concrete 1:3:6 |
| 9 | 5.33.Providing and laying in position machine batched and machine Mixed Design Mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(CEMENTSHALLBEISSUEDFREE OF COST FROM NALCO"S STORE). |
| 10 | 5.33.1.All Works upto Plinth Level |
| 11 | 5.33.2.All works above Plinth level upto Floor V level |
| 12 | 5.22.Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming IS:1786 for R.C.C. work at all height and depths, carting the same from store / issue points to site of work, straightening, cleaning, bending to required shape and lengths as per details, including supplying and binding with contractor"s ownsoft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused / scrap / unserviceable steel to owner"s storage point etc. all completed as per the direction of Engineer-in-Charge. [REINFORCEMENT STEEL / TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO"S STORE] |
| 13 | 5.9.Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillars, posts, struts and stair cases and all types of RCC work at any depth below ground level/up to all heights above ground level in any floor as directed by Engineer-in-Charge. |
| 14 | 5.9.1.Foundations, Footings, Bases of Columns, etc. for mass concrete |
| 15 | 5.9.3.Suspended floors, roofs, landings, balconies and access platform |
| 16 | 5.9.6.Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | 6.4.Providingandlayingbrick masonry with fly ash bricks in foundation, up to all depth and superstrutureup to floor V levelin cement mortar 1:6 ( 1 cement : 6 sand ) using Nawarngapur or approved qualitysandwithbrick classdesignation50including curing andrackingoutjoints,scaffolding etc. all completed as per the direction of Engineer-in-Charge.(FLY ASH BRICKS and CEMENT WILL BE ISSUED FREE OF COST FROM NALCO"S STORE) |
| 18 | 6.5.Providingandlayingbrick masonry with fly ash bricks in foundation,super structure up to all hightin cement mortar 1:6 ( 1 cement : 6 sand ) using Nawarngapur or approved qualitysandwithbrick classdesignation50including curing andrackingoutjoints,scaffolding etc. all completed as per the direction ofEngineer-in-Charge.(FLY ASH BRICKS and CEMENT WILL BE ISSUED FREE OF COST FROM NALCO"S STORE) |
| 19 | 7.1.1.Providing and laying Random rubble masonry (using Nowrangpur or approvedquality sand) with approved hard stone in drains, foundation, plinth, walls below ground up to any depth and upto plinth level above ground level, culverts, retaining wall in all size and upto all hight with cement mortar 1:6 (1 cement: 6 coarse sand) including curing, cost of the stone/materials, royalty etc. all complete as per the direction of Engineer-in-Charge. . (CEMENT WILL BE ISSUED FREE OF COST FROM NALCO"S STORE) |
| 20 | 8.12.Providing and laying flamed finish Granite stone flooring in required design and patterns ( Flamed finish granite stone slab , Cherry Red, Elite Brown, Cat Eye or equivalent), in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 21 | 9.1.Providing Wood Work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 22 | 9.1.2.Salwood Chaukath |
| 23 | 9.2.Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 24 | 9.20.1.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 25 | 9.48.Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 26 | 9.77.Providing and fixing bright finished brass 100 mm Mortice Latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 27 | 9.77.1.100 mm Mortice Latch |
| 28 | 9.74.Providing and fixing bright finished brass Tower Bolts (barrel type) with necessary screws etc. complete : |
| 29 | 9.74.1.size-200x10 mm |
| 30 | 9.81.Providing and fixing bright finished brass Handles with Screws etc. complete: |
| 31 | 9.81.1.125 mm |
| 32 | 9.82.Providing and fixing bright finished Brass Hanging type Floor Door Stopper with necessary screws, etc. complete. |
| 33 | 11.36.Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 34 | 11.38.Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. |
| 35 | 11.41.Providing and laying Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 36 | 11.41.2.Size of Tile 600x600 mm |
| 37 | 12.30.Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). |
| 38 | 12.41.Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 39 | 12.41.2.110 mm diameter |
| 40 | 12.42.Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion. |
| 41 | 12.42.1.Coupler |
| 42 | 12.42.1.2.110 mm diameter |
| 43 | 12.42.2.Single pushfit Coupler |
| 44 | 12.42.2.2.110 mm diameter |
| 45 | 12.42.3.Single tee with door |
| 46 | 12.42.3.2.110x110x110 mm |
| 47 | 12.42.4.Single tee without door |
| 48 | 12.42.4.2.110x110x110 mm |
| 49 | 12.42.5.Bend 87.5° |
| 50 | 12.42.5.2.110 mm bend |
| 51 | 12.42.6.Shoe (Plain) |
| 52 | 12.42.6.2.110 mm shoe |
| 53 | 13.1.2.Providingandlaying 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand)including applying water to surface before plastering,scaffolding,curing up to 7 days etc. all complete for all height/depth etc. all completed as per the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUEDFREE OF COST AT NALCO"S STORE). |
| 54 | 13.2.2.Providingandlaying 15mm thick cement plasterofcement mortar 1:6 (1cement:6 sand) on theroughsidesof single or half brick wall ormasonarywork using approvedtypeofsand including applying water to surface before plastering,scaffolding including curiing up to 7 days etc., allcompletefor all height etc. all completed as per the direction of Engineer-in-charge.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO"S STORE ) |
| 55 | 13.45.1. Finishing walls with textured interior/ exterior paint of required design and shade over New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of interior/ exterior primer applied @ 2.20kg/10 sqm as directed by Engineer-In-Charge. |
| 56 | 13.50.3.Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 57 | 13.61.Providing & Applying Painting with Synthetic Enamel Paint of approved brand and manufacture to give an even shade. |
| 58 | 13.61.1.Two or more coats on new work |
| 59 | 13.52.Finishing with Epoxy paint (two or more coats) or polyurethene paint as per requirement at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 60 | 13.52.1.On steel work |
| 61 | 13.52.2.On concrete work |
| 62 | 13.16.1.Providingandlaying 6 mm Cement Plaster of mix : 1:3 (1 cement: 3 fine sand) (CEMENTSHALLBEISSUEDFREE OF COST FROM NALCO"S STORE). |
| 63 | 13.8.Providing and applying white Cement Based Putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 64 | 13.47.1.Finishing walls with Premium Acrylic Smooth Exterior Paint with Silicone additives of required shade over New Work (Two or more coats applied @ 1.43 ltr/10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as directed by Engineer-in-Charge. |
| 65 | 13.83.Wall Painting with Premium Acrylic Emulsion Paint of Interior Grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 66 | 13.83.2.Two coats |
| 67 | 15.3.Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 68 | 15.4.Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 69 | 15.9.2.Demolishing stone rubble masonry in cement mortar, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : |
| 70 | 15.6.Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 71 | 17.4.Providing and fixing white vitreous china flat back or wall corner type llipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 72 | 17.4.1.One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 73 | 17.6.Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : |
| 74 | 17.6.1.Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
| 75 | 17.7.Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required as directed by Engineer -In-charge. |
| 76 | 17.7.2.White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 77 | 17.32.Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing as directed by Engineer -In-charge. |
| 78 | 17.32.2.Rectangular shape 453x357 mm |
| 79 | 17.32.4.Rectangular shape 1500x450 mm |
| 80 | 17.2.Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 81 | 17.2.1.W.C. pan with ISI marked white solid plastic seat and lid |
| 82 | 18.48.Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 83 | 21.1.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately). |
| 84 | 21.1.1.1.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 85 | 21.1.1.3.Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron). |
| 86 | 21.1.2.For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 87 | 21.1.2.3.Polyester powder coated aluminium (minimum thickness of polyester powdercoating 50 micron). |
| 88 | 21.3.Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item). |
| 89 | 21.3.2.With float glass panes of 5.50 mm thickness |
| 90 | 21.3.3.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 91 | 22.14.1.Grading roof for water proofing treatment with. Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (CEMENTSHALLBEISSUEDFREE OF COST FROM NALCO"S STORE). |
| 92 | 22.3.Addition of waterproofing admixtures like Sika, Dr fixit or equivalent during concreting/ grading concrete, as per manufactures specifications all complete as per direction of engineer-in-Charge.etc. all completed as per the direction of Engineer-in-Charge. |
| 93 | 22.4.Providing & fixing ofletters of any language of approved patterns made with stainless steel (Grade-304) including base plate at back side,matching to the size of letter,over vertical masonry etc.all complete as per the direction of Engg-In-Charge. |
| 94 | 22.5.Supply of Luxalon 300C perforated linear aluminum panel wall paneling system as manufactured by Hunter Douglas Pvt. Ltd. (shade as per Luxalon @ colour chart).The system shall consist of panel 300mm wide X 29 mm deep X 0.7mm thick .The panel shall have 2mm dia. perforations with 5mm c/c distance between 2 holes to give it a 15% openness factor. The perforated panels shall have a nominal plain border of 8.50mm along the longitudinal direction to assure maximum flatness & stability. The panels to feature 5mm bevel edge to form a visual closed ‘V’ groove joints between 2 panels. The panels shall be in standard length of 1 meter – 6 meters. The panels shall be coil coated on continuous paint line, double baked & roll formed from stove enameled corrosion resistant aluminum alloy AA3005 for higher strength & good roll forming characteristics. Panels shall be clipped to an enameled 7 roll formed Aluminum panel carrier of 41.5mm wideX 62 mm deep X 0.95 mm thick in standard length of 5 meters. The panel carrier shall be double baked & roll formed from enameled corrosion resistant aluminum alloy AA5052 (AL.Mg) in black colour with cutouts to hold the panels in modules of 300 mm .The carrier shall be provided with special lock in clips to lock the panels if desired. The first carriers shall be fixed at a distance of 300mm from the end wall & thereafter at 1.3 meters c/c. The carriers shall be fixed directly to the wall using fasteners. At the perimeter, where the panels & wall meets ‘L’ shaped flashing profile coil coated shall be used including the cost of all materials and labours etc. all complete as per the specification and /or direction of Engg-In-Charge. |
| 95 | 22.6.Providing and fixing Luxalon 300C Perforated 2.5mm/2.0mm diameter 5mm centre to centre with Non-Woven textile Aluminum false ceiling of approved colour consisting of panel 300mm wide X 30mm deep x 0..7mm thick with bevel edge having panel length upto 6 meter coil coated on continuous paint line, double baked and roll formed for higher strength and good roll forming characteristics. The panel ends will be raised upto 29mm .The panels about each other with a narrow ‘V’ groove .Panel shall be clipped to a baked enameled aluminum carrier of 41.5 mm wide X 62mm deep X 0.95mm thick in standard length of 5 mtrs,made of double 300mm closed at distance 2.00mtrs. Panel carrier suspended by means of 6mm thick galvanized threaded Rod complete as per specification drawings and as directed by Engg-in-charge. |
| 96 | 22.7. Supply and fixing of Mikasa Pristine, planks Thickness 14mm,top Layer 2.5mm Venner/Hardwood,middle layer 10mm Pine wood having Density 650 Kg/m3.Bottommlayer 1.5mm Balancing Veneer,Plank size of 1800mm X 135mm Natural/Stained/ Smoked. Satinlacquered/ Matt lacquered/ Brushed,Square Edge/Micro Bevelled Edge/ Bevelled Edge, planklok Joint,Glueless installation, Prefinished Surface with 7 times UV hardened acrylic lacquered, free from formaldehyde emission as strictly following EU E1 norms. Resending and Refinishing 2 times after 10 years interval. Moisture content 7-9%.Free of insects, woodworms as secured by process temperatures, Fire Class G,highest fire classification as per Swedish Building Code BBR 94, on top of 2mm moisture barrier and a substrate of smoothly finished cement and sand plastered surface with coating including all taxes,wastage,transportation,labour charges etc. all complete as per direction of Engineer-in-Charge. |
| 97 | 22.8.Supply and fixing of Mikasa Oak Skirting (2400 X 80 X 20 mm) in the peripheral wall area of the room on top of smooth plastered andprimed surface to lock the engineered wood flooring with the help of nails including all taxes,wastage ,transportation , labour charges all complete as per direction of Engineer-In-Charge. |
| 98 | 22.9. Supply and fixing of Mikasa Oak Reducer (2400 X 51 X 15 mm) / Profile (2400 X 38X 15 mm) in the transition area and end area of the wooden flooring respectively with the help of nails including all taxes,wastage,transportation,labour charges, all complete as per the direction of Engineer-In-Charge. |
| 99 | 22.15.Supplying and applying epoxy anchor bolt chemical of Hilti / make type RE-500 V3or Fischer Fis EM585 approved equivalent of approximate length (maximum 300mm long) in concrete to take direct tension of minimum 1.6M ton incuding workmanship drilling cleaning the hole, placing and aligning the fastener, etc as per direction of E-I-C.( Rebar shall be issued free of cost at Nalco store.) |
| 100 | 22.15.1.For bars of Dia up to 12 mm. |
| 101 | 22.15.2.For bars of Dia of 16 mm. |
| 102 | 26.31.Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect |
| 103 | 26.31.1.SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. |
| 104 | 26.31.2.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
