Military Engineer Services-MES has published Tender For Provision Of Radar Complex For Installation Of Asr With Associated Equipment At Icgas Ratnagiri. Submission Date for this Tender is 27-03-2024. Building Work Tenders in ratnagiri Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jan-2024 | 83035AMDTSTODATES1 | Date | 19-02-2024 |
| 2 | 08-Feb-2024 | 83035AMDTTODATES2 | Date | 11-03-2024 |
| 3 | 27-Feb-2024 | 83035AMDTTODATES3 | Date | 27-03-2024 |
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART-I (BUILDING & STRUCTURE WORKS) Details of prepriced schedule is given in tender documents. |
| 2 | SCHEDULE "A" PART-II ( SITE CLEARENCE, DEVELOPMENT AND EXCAVATION) Details of prepriced Schedule is given in tender documents. |
| 3 | SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents. |
| 4 | SCHEDULE "A" PART-IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents. |
| 5 | SCHEDULE "A" PART-V (ROAD/ PATH/ CULVERT/ HARDSTANDING) Details of prepriced Schedule is given in tender documents. |
| 6 | SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents. |
| 7 | SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents. |
| 8 | SCHEDULE "A" PART-VIII (SHELTER FOR DG SET) Details of prepriced Schedule is given in tender documents. |
| 9 | SCHEDULE "A" PART-IX (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents. |
| 10 | SCHEDULE "A" PART-X (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents. |
| 11 | SCHEDULE "A" PART-XI (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents. |
| 12 | SCHEDULE "A" PART-XII (LIFTS) Details of prepriced Schedule is given in tender documents. |
| 13 | SCHEDULE "A" PART-XIII (CONDUIT FOR TELE/TV & AVIATION LIGHT) Details of prepriced Schedule is given in tender documents. |
| 14 | SCHEDULE "A" PART-XIV (AIR CONDITIONING) Details of prepriced Schedule is given in tender documents. |
| 15 | SCHEDULE "A" PART-XV (SPECIAL ITEMS) Details of prepriced Schedule is given in tender documents. |
| 16 | SCHEDULE "A" PART -XV (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col." E " signifies this fact only. |
| 17 | INTERNAL WATER SUPPLY S & F Angular stop cock 15 mm dia, quarter turnMake – Jaquar model No CQT-23059 |
| 18 | S & F Two way bib top/ angle cock 15mm dia. Make – Jaquar model No CQT-23041 or equivalent |
| 19 | S & F Health faucet with flexible pipe (ABS Body) with 01 meter long PVC tube & wall hook Make: Jaquar model No ALD-chr-573 or equivalent |
| 20 | INTERNAL ELECTRIC SUPPLY: S & F BEE energy efficient BLDC high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a down road of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. |
| 21 | S & F energy efficient non-metallic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. |
| 22 | S & FVertical triple pole & neutral (VTPN), double door, 6-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FPMCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. (For AC Circuit) |
| 23 | ROAD/ PATH/ CULVERT: M&L for 200 mm thick (compacted thickness) granular sub base using 63mm stone aggregate Grade - V deposited spread and levelled, watered and rolled with 8 to 10 tonne power roller all as specified & directed |
| 24 | M&L for WMM 150 mm thick (compacted thickness) in layers of 75mm each using stone aggregate of grading as specified in table 400-11 of IRC publication viz premixing the material with water at OMC in compacting with vibrator roller to achieve the desired density complete all as specified. |
| 25 | M&L for 125mm thick DLC of grading (26.5mm - 0.075mm) with 7 days compressive strength of 10kg/sqcm with minimum cement content of 180 kg/cum. Design mix laying spreading and compaction using vibratory roller of minimum 80 kn weight to required gradient and camber as specified.Rolling to be continued till density achieved is atleast 98 percent of maximum dry density of the laid surface complete all as specified. |
| 26 | M&L for HDPE film 400 micron thick laid and secured for laying over PDC all as specified.. |
| 27 | M&L for 200 mm thick PQC in pavement/hardstanding of flexural strength of 45 kg/sqm including formwork in field using non circular synthetic fibres@ 0.25% byweight of cement complete all as specified ( The cost of non circular synthtic fibres shall be measured and paid separately rate considered separately) |
| 28 | M&L for forming 25 mm wide expansion joint in 200 mm thick concrete pavement and fillilng with 25mm thick premoulded high density filler board HD 100as psecified and provn of 30 mm dia polythylene back up rod and top 15 mm primed and filled with polyurethene based sealant( backup material) over two coats of approved primer before 30 minutes to pouring the sealant all as per manufactures instruction. The concrete surface of the hoints shall be made dry and free of dirt and vaccume cleaned by a mechanical device. The joint performace warranty shall be 10 years etc complete all as specified and directed. |
| 29 | M&L for forming dummy joints of 8 mm wide and polythylene back up rod of 10 mm dia and tip 15 mm primed and dilled with polyurethene based sealant ( backup material) over two coats of approved primer before 30 minutes to pouring the sealant as per manufacturer instructions. The concrete surface of the joints shall be made dry and free of dirt and vaccume cleaned by a mechanical device. The joint performance warranty shall be of 10years etc complete all as specified and directed. |
| 30 | M&L for forming construction joints of 10 wide and 25mm depth and polythene back up rod of 12 mm dia and top primed and filled polythene based sealant (backup material) over towo coats of approved primer before 30minutes to pouring the sealant all as per manufacturers instruction. The concrete surfaces of the joint shall be made dry and free of dirt and vaccume cleaned by a mechanical device. The joint performace warranty shall be of 10 years etc complete all as specified and directed. |
| 31 | SEWAGE DISPOSAL: M&L for RCC Septic tank with upflow filter designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users |
| 32 | EXTERNAL ELECTRIC SUPPLY: Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60439-1 & 2, LT panel board made out of 2 mm thick GI Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel ,single door withboth side opening & Confirming to IP 54 for outdoor panel Double door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– Make of panel board-L&T / ABB / Schneider/Seimens or by their authorised channel partners duly authenticated by th company. (Main Panel-1 ) |
| 33 | INCOMING:- (a)MCCB 400 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&Tcat no- CM98403OOROOG /Legrand ./schneider.- 1 no (b) Aluminium TPN Busbar 600 Amps - 1 Set OUTGOINGS:- (a) MCCB 320 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&Tcat no- CM98401OOQOOG /Legrand /schneider- 2 no (STABILIZER & SPARE) (b) MCCB 125 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu L&T CAT NO-SL98653OOOO/ LEGRAND CAT NO-420086 /equivalent of ABB- 1 nos ( APFC) (c) Elecronic energy trivactor meter,suitable for 3 phase 4 wire CT operated ,temper proof,operated on 240v AC ,three phase, 5 amps to 10 amps, base mounting meter, backlit LCD display with user friendly legend, accuracy class-0.5, MD recording, revenue protection ( in case of wrong electric connection),capability to disply & communicate ( in case of absence of main supply), with optical port,deficiency metering with either phase/netral current, IP 51 protection, as per IS13779,make of meter -L&T model no- ER300P & Cat no-WR300BC52RSof L&T or equivalant of secure (d) CT 400X5 Amps 3 nos ( for Meter) ( e) Ammeter Class-1,digital pannal mounting type 96mmx96mm L&T cat no WDS301FCA00 including CT& selector switch for each outgoing (f) Voltmeter Class-1, digital pannal mounting type 96mmx96mm L&T CAT NO.WDS301FEV00 & selector switch (g) LED TYPE indicator lamp1 set (set of three for R,Y,B) |
| 34 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60439-1 ,LT panel board made out of 2 mm thick GI Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel ,single door withboth side opening & Confirming to IP 54 for outdoor panel Double door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– Make of panel board. (Main Panel-2 ) |
| 35 | INCOMING:- (a)MCCB 320 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&Tcat no- CM98403OOQOOG /Legrand ./schneider.- 1 no (b) Aluminium TPN Busbar 600 Amps - 1 Set OUTGOINGS:- (a) MCCB 250 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&Tcat no- CM92009OOP1OG /Legrand /schneider- 2 no (AMF PANAL & SPARE) (b) MCCB 125 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu L&T CAT NO-SL98653OOOO/ LEGRAND CAT NO-420086 /equivalent of ABB- 1 nos ( RADAR PANEL) ( c ) Ammeter Class-1,digital pannal mounting type 96mmx96mm L&T cat no WDS301FCA00 including CT& selector switch for each outgoing (d) Voltmeter Class-1, digital pannal mounting type 96mmx96mm L&T CAT NO.WDS301FEV00 & selector switch (e) LED TYPE indicator lamp1 set (set of three for R,Y,B) |
| 36 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60439-1 .LT panel board made out of 2 mm thick GI Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43for indoor panel ,single door withboth side opening & Confirming to IP 54 for outdoor panel Double door withboth side opening includingNeoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following(DG Panel ) |
| 37 | INCOMING:- (a)MCCB 250 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&Tcat no- CM92109OOP1OG /Legrand ./schneider.- 1 no (b) Aluminium TPN Busbar 400 Amps - 1 Set OUTGOINGS:- (a) MCCB 125 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu L&T CAT NO-SL98653OOOO/ LEGRAND CAT NO-420086 /equivalent of ABB- 3 nos ( Build DB , AC, & Sapre ) (b) MCB TPN,4P, 63 Amps, 50 Hz, 415 Volts, 10 KA -02 Nos (Lift) (c) MCB TPN, 4P, 32 Amps, 50 Hz, 415 Volts, 10 KA -01 Nos (Water Supply) (d) MCB SPN, 2P, 32 Amps, 50 Hz, 415 Volts, 10 KA -02 Nos (St Lt , aviation light ) ( e ) Ammeter Class-1,digital pannal mounting type 96mmx96mm L&T cat no WDS301FCA00 including CT& selector switch for each outgoing (f) Voltmeter Class-1, digital pannal mounting type 96mmx96mm L&T CAT NO.WDS301FEV00 & selector switch (g) LED TYPE indicator lamp1 set (set of three for R,Y,B) (h) Astronomical, digital time swithces -1 No (j) Power contactor MR 13 ,with 230 coil 1 No |
| 38 | Supply and fix M & L Hot dip galvanised Iron octagonal pole of height 7 mtrs minimum galavnising of 70 microns, top 70 mm , bottom 130 mm and 3 mm sheet thickness in single section without any weld joints with square plate of minimum dimensions 225x225x12 mm, foundation bolts of sizeM-24x750 mm long - 4 nos, single arm GI bracket of 900x1000 mm for mounting the light fitting at an angle of 120 degree,backelite sheet with one 6 A SP MCB and 16 mm stud type connectors -04 nos inside the pole at the door opening for cable connections,common template s minimum 01 for each 15 poles all fixed and bolted on and including suitable RCC pedestal of minimum size 0.4mx0.4mx1.4m including form work as per manufacturers design & Drawing recommendations and specifications all as directed Mast and pole shaft shall be be as per BSEN 10025,IS 5986, ASTM A572 , Galvanization as per IS-4759/2629 Make of pole- Bajaj / Jindal /Crompton/Shubham- |
| 39 | Supply & fix in repair PVC insulated and sheathed copper multistranded cablethree core 1.5 sqmm, heavy dutythrough or on poleconnecting to cable looping box of street light fitting all as specified & directed |
| 40 | Supply and fix cable route indicator made of round CI disc embossed LT Cable, of size 16cm dia 6mm thick duly revited withangle of size 50x50x4mm and 60cm long including PCC 1:2:4 B2 using 20mm aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified. |
| 41 | Supply and fix cable route indicator made of round CI disc embossed HT Cable, of size 16cm dia 6mm thick duly revited withangle of size 50x50x4mm and 60cm long including PCC 1:2:4 B2 using 20mm aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified. |
| 42 | EXTERNAL WATER SUPPLY: Construction of brick masonry valve chamber of size 900x900x1200 mm (internal dia) suitable for 80 mm dia sluice valve with necessary earth work excavation plain cement concrete 1:4:8 using 40 mm graded stone aggregate 75 mm thick in cement mortar 1:6 15 mm thick plastering 1:6 inter nally including flooring and externally rep to 15 mm below ground level plain cement concrete 1:4:8 type B1 using 20 mm graded stone aggregate in coping MS sheet cover made out of 3 mm thick MS sheet flat iron frame and bracing with locking arrangement applying two coat of synthetic enamel paint including dismantling removing the existing damage chamber completely removal of debris to a distance not exce eding 50 mtr distance depositing where as directed by Engr - in- charge |
| 43 | Supply, installation, testing and commissioninng of Openwell submersible pump, suitable for pumping water 25 LPM discharge at 39 m head, IP 55, cast iron body with gun metal impellers including fixing of safety valve, pressure guage and priming valve etc direct coupled suitable for operation on 3 phase, 415 V, AC, 50 Hz and mounted on channeliron base frame including nut, bolts & washers etc. PCC foundation, foundation nuts, bolts & washer as per manufacturer"s instructions including proper size cupper cable from starter to motor of suitable size all as specified & directed.(Pump-2 Nos: 1 Running & 1 Standby) |
| 44 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60349-1 & 2,up to 400 Amps incommer OR confirming toIEC 61349-1 & 2, above 400 Amps incommer,LT panel board made out of 2.0 mm thick GI Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel & Confirming to IP 54 for outdoor panel ,double door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– Make of panel board-L&T / ABB / Schneider/Seimens or by their authorised channel partners duly authenticated by th company. (Pump Panel ) (a) Incoming MCB TPN 32 Amp and 10 KA breaking capacity, 415 volts-01 No (b) Outgoing MCB, 2 pole 25 Amp, 10ka-03 Nos (c)Voltmeter with selector switch -01 No (d)Ammeter with CT-03-01No (e) Indicator lamp -03 No (g) DOL starters including connected accessories such as indicators, motor protection devices & selector switches - 02 Nos.(For 1.5 to 2 HP) (h) Including suitable size ofgland for passing cable and lugs etc |
| 45 | DG SET: (a) Supplying, installing, testing and commissioning, factory assembled silentDiesel Engine driven generator set, fully wired alternator AC to give an out put of 160 KVA continuously rating at a power factor0.8 lagging, 3 phase 4 wire, 415 volts 50 Hz ± 1% supply, 1500RPM, directly coupled with diesel engine liquid cooled mounted on common base frame complete with floor mounting fuel tank (service tank) of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturer"s instructions, vibration damper pads, control panel & other accessories etc and comprising of following. (b)Diesel Engine: Liquid cooled turbo charged with after cooler to deliver suitable BHP at 1500RPM under NTP conditions of BS 5514 and conforming to IS 10002, DIN 6271 & ISO 3046 with an overload capacity of 10% for one hour in any 12 hours continuous operation with the following accessories:. Diesel engine of rated speed at full load electric start developingwithsystem with radiator and including electronic governor control of class A1, engine control panel, lub oil pump, water pump, fuel tank, exhaust pipe with silencer and suitable for electric start with batteries ofadequate capacity and suitable for alternator of specified capacity complete with fly wheel direct/flexible coupling and coupling guard complete. Make of engine: KOEL GREEN/Kirloskar Electric / Ashok leyland / Cummins / Greaves, Make of Alternator: KOEL GREEN /Kirloskar/Stampford / Crompten / Jyoti (a) Radiator with blower fan or heat exchanger with guard. (b) Pipe coupling for engine cooling system piping. (c ) Corrosion inhibitor coolant |
| 46 | (d) Paper element filters (i) Fuel filter (ii) Lube oil filter (iii) By pass (e) Fly wheel housing and fly wheel to suit alternator. (f) Engine bearing mechanism in fly wheel housing. (g) Shut off coil with safeties for LLOP/HWT/over speed. (h) Dry type air cleaners and vacuum indicators. (j) Residential silencers. (k) Stainless steel exhaust flexible bellows. (l) Motor driven priming pump. (m) Battery charging alternator. (n) Exhaust piping made out of STIC C class, MS pipe inclusive of all accessories and hardware, necessary supports scaffolding as per manufacturer"s recommendations to sustain back pressure with rain cap. (o) Mineral wool insulation 2 inch thick suitable for 400 degree Celsius temperature cladded with aluminium sheet o30 gauge for the entire length of exhaust pipe. (p) First fill of oil, coolant and diesel during commissioning and 12 hours testing. (q) Interconnecting copper cabling of adequate capacity batteries control. (r ) Fuel pipe class STIC 1" /1.5" /2" dia - 01 lot (s) Self starter 12 volts DC. (t) Electric operated electronic governor. (u) Fuel injection pump. (v) Electronic instrument panel, complete with all accessories as per manufacturer"s specifications displaying the following:- (i) 24V Battery. (ii) Water temperature. (iii) lubricating oil pressure. |
| 47 | (iv) Engine speed -1500Rpm (v) Engine hours (vi) Frequency. (vii) Voltage. (w) Safety control (Trip and indication). (i) High water temperature (ii) Low lube oil temperature (iii) Overspeed stop (x) Base frame: Sturdy, fabricated welded construction, channel iron base frame (duly painted) for mounting engine and alternator as per manufacturer"s design alonwith AVM pads. (y) Battery:-12 volts(1x12v Battery) DC, 180AH, maintenance free battery conforming to IS:14257 with leads & terminals (Make- Excide/Amron). (z) Fuel tank:10 hrs. full load diesel storage capacity fuel tank with mounting brackets factory made of 5mm thick HR/MS sheet with level indicator fuel inlet, fuel outlet, air vent, drain plug, in let arrangement for diesel filling fro exterior canopy (without opening its panel) etc complete all as specified and directed. (c) Alternator:Suitable rated for 160 KVA DG set, 0.8 pf , 415 volts, 3 phase, 4 wire, 50 Hz at 1500 RPM, self excited and self regulated with AVR brushles, screen protected, drip proof , insulation class-H, IP -23, voltage regulationgrade - VG 3 self ventilated and conforming to BS: 5000 / IS: 4722 suitable for engine as mentioned here-in before, conformig to IS: 13364(part-1) Make: KOEL GREEN / stampford/crompten/kirloskar (d) Acoustic Enclosure:- M & L for acoustic enclosure for the above 160 KVA DG set to reduce noise level to 75 dB measured at 1.0 meter distance for audible frequencies as per guide of Central Pollution Control Board and size 3200x1300x1795mm and manufacturer"s specification and comprising of following from authorised GOEMs of Gen Set manufacturer"s specified :- |
| 48 | (i) Sound insulation : 100mm thick Rock wool (Density 64 Kg/Cum). (ii) Outer body : 1.5mm thick CRCA (iii) Door : 1.5mm thick CRCA(iv) Base frame : ISMC 300 (v) Inside illumination : 1 No.- 1 x 18 watt FTL fitting of make Phillips/ Bajaj/ Crompton. (e) AMF Control panel:- Factory fabricated cubicle type, free standing, fixed on angle ironframemade out of 50x50x6 mm, Outdoor type, IP-52, AMF control panel, provided with removable rear panels & hinged front panel for easy accessibility, fabricated out of not less than 2.00 mm thick CRCA sheet including two coats of powder coated paint over a coat of red oxide primer etc and comprising of following: (f) AMF control circuit with 4 pole MCCB250Amps - 2 nos, with ultimate breaking capacity Icu-36 KA at 415 volts and microprocessor release conforming to IEC 60947 Part-I with breaking capacity Ics=Icu at 415 volts , thermal overload setting 70% to 100%, short circuit setting 5 to 10 times-02 Nos. for main supply & DG set supply with HRC back up fuse complete with all DC control relays/ Line voltage monitor (LVM) as per OEM specifications incorporating motorised stored energy operating Engine start, stop, three attempt starting facility and failure to start etc. (g) Digital load manager : Three phase 4 wire indicating V,I,PF, KVA, KW, F of Enercon make with serial communication port model No.EM6400 with class 1.0 accuracy meter or equivalent make suitable rating of CT per phase- one No. (i) Indication lamp R, Y, B with 3 Nos. ofHRC fuses-10 sets. (ii) Bottom gland plate for incoming and outgoing cables. (iii) Circuit diagram plate.Note :- DG set should be suitable CPCB -4 as per latest norm wef 01 July 2023 of National Clean Air programme (NACP) Act 1981. Note: Load testing of DG set for 24 Hrs shall be done by IEM/ Rep of Accepting Officer on commissioning. Cost of T&P, Electric load, POL..etc required for testing of DG Set is to be deemed in quoted rate. Nothing extra payment shall be made by the Department for the same. |
| 49 | AIR CONDITIONING: Supply, installation, testing & commissioning Split Air Conditioner 2 Ton, 4 star rating, inverter type technology, 230 V, 50 Hz, refrigerant -R32, single phase, indoor/ outdoor unit complete with cordless remote control unit and compressor- inverter rotary type, condenser-100% Copper type, noise level outdoor-60 dB and high cooling performance and desirable cooling mode for different types of climate. |
| 50 | Supply and fixing of voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variaiton between 170 volt to 280volt with output voltage stabilised at 230Volt with accuracy of ± 2.5% and of capacity of 5.0 KVA. (For 2 Ton Split AC) |
| 51 | Supply and fixing ofelectronic voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variaiton between 170volt to 270volt with output voltage stabilised at 230Volt with time delay 3 minutes+-20 seconds ITDS and of capacity of 4.0 KVA. |
| 52 | Supply & fix MCCB DB vertical type, suitable for 125amp MCCB as ncomer mae of steel powder painted with neutral busbar 200A neutral link, IP 43, IK 09 protection grade, 415V TPN with 6 way double door all as specified & directed. make- L&T / Schenieder / ABB (AC main DB) |
| 53 | WATER COOLER: Supply and fix water cooler electric driven (single phase), having nominal cooling capacity 40 liter/hour and storage capacity of 80 litre all as specified and directed. |
| 54 | Supply and fix Voltage stabilizer forautomatic operation, single phase naturallyair cooled indoor type & designed for inputvariation between 130 V to 290 V with output voltage stabilized at 230 V withaccuracy of ± 2.5% and of capacity 2 KVA |
| 55 | Supply Installed , testing ,Commissing & Operating of Water purifire system Plant having capacity 25 LPH canneting withwater coolercomplete as per manufacturer design,Make: kent and as equalantincluding, all cannecting accessories with water cantrol valve, necessary cannection of plumbing testing andinstallation all as specified and directed by Engr-in-charge. |
| 56 | CONDUIT FOR TELE/ TV: M&L for TV socketmodulemetal flushed including flushed Box cover plate Box for 2 way module complete all as specified. |
| 57 | M&L for telephone jak with modulemetal flushed including flushed Box cover plate Box for 2 way module complete all as specified. |
| 58 | Supply and lay coexal cable for TV Cabledrawn through conduit complete all as specified. |
| 59 | FIRE ALARM SYSTEM: Supply and fixing fire alarm sounder/ Sirens electronic type horizontal single stage continuous normal operation for atleast 50 Minuts with sound level 65 db to 143 db measured at 1.5 mtr with sound output varaition of +5 db 500 mtrs range complete all as specified. |
| 60 | Supply and fix Addressable manual call point resettable type complete all as specified. (Each floor-01 Nos) |
| 61 | Read-M & L for Low smoke Zero helogen flame retardent fire alaram cable2 core, 1.5 mm² copper conductor confirming to BS7629-I , BS6387 & rated for 500 v grade having plaine sraded copper coductutor with priming insulation of glass mica fire resistance tape & secondery insulation of high performancesilicon rubber with electrostatic screen of aluminium fire barrierType LT53 outer sheathconfirming to BS 7655 , red in colourdrawn through & including concealed steel conduit including laying, fixing, connecting complete all as specified and directed. |
| 62 | Supply and fix 06 Watt wall mount CD Speaker complete all as specified. |
| 63 | SupplY & fix Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete all as specified. |
| 64 | Supply and fix Detectors Complying with and type certified to EN-45 Addressable type multisensor detector with heat and smoke combination as per IS: 11360 complete all as specified. |
| 65 | S & F Rigid non-metallic ERW Steel conduit 25 mm dia inclusive of boxes (junction/ terminal) & inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts,saddles, pipe hooks etc complete all as specified. . |
| 66 | S & F Remote Response indicators complete all as specified. |
| 67 | Supply and fix Short circuit isolators complete all as specified. |
| 68 | AVIATION LIGHT: Supply and fix aviation obstruction light of 9 W LED twintype twin with doom and other fixing accessories complete all as specified. |
| 69 | Supply and installation of fast earth electrode 3.0 mtr length size model F84, having two M S pipe one inside the other with proper not deep galvanished outer dia 88 mm and inner dia 48 mm and the cavity between the rod pipes is filled with ground resistance improment powder, sealed with both end the outer pipe of electrode should be zink coated, the electrode should burried directly in the ground by making boring of diameter 10"" with boaring machine highly conductive non magnetic and non corrives is to be connected with GI strip 25 X 3 mm of 2 to 3 mtr length to facilitet further connection to earth dolly and provision of earthing chamber in bricks wall size 45 x 45 x 15 cm an dhaving PCC cover of required size complete all as directed and all as per IS 3034 (1981) Note: GI strip to be measured andpaid seperately. ( Ext. Electric Supply- 24Nos, Ext Water Supply - 02Nos, DG Set-05Nos, Lifts-04Nos & Air Conditioning- 02Nos) |
| 70 | SPECIAL ITEMS: S&F venetian roller blinds with all necessary fittings/ accessories complete all as specified & directed |
| 71 | Provision of stainless steel nomenclature of height 30 cm and fixing at any height with suitable fixing accessories including staging etc complete all as specified & directed |
| 72 | S&F of SS-304 stainless steel railing and fixing with suitable fixing accessories etc complete all as specified & directed |
| 73 | S&F4-mm ACP (aluminium composite panelling ) of EURO/Timex make with KYNAR 500 coating for UV protection as per design including 1"x 2" aluminium section for framework, silicon for fixing sheets & filling joints etc allcomplete all as specified & directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
