Tender For Special Repair In Bldg No P-11 At Nagtalao Under Ge Banar, Jodhpur-Rajasthan

Tender For Special Repair In Bldg No P-11 At Nagtalao Under Ge Banar- 1 Taking Down Cement Or Cement Lime Plaster, Of Any Description On Brick Or Stone Walls Etc Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Complete All As Specified. 2 M&L For 10Mm Thick Cement Plaster In Cm 1:6 Onfair Faces Of Brick Work, Stone Work Or Concrete Surface Finished Even And Smooth Without Using Extra Cement Complete All As Specified. 3 M&L For 15Mm Thick Cement Plaster In Cm 1:4 On Uneven Surface, Stone Work Or Concrete Surface Finished Even And Smooth Without Using Extra Cement Complete All As Specified. 4 M&L For Rendering 5 Mm Thick In Cm ( 1:3 ) As In Ceiling And Finish The Surface Even And Smooth Without Using Extra Cement Complete All As Specified. 5 Demolition Of Cement Concrete ( Unreinforcement ) In Ground Floor And Paving N. Exc 15 Cm Thickness ( Below Or Above Ground Level ) Complete All As Specified. 6 M&L Hardcore Of Gauge Nexc 63Mm Broken Stone Or Boulders Deposited, Spread And Levelled In Layers N. Exc 15Cm Thick Watered And Rammed To A True Surface Complete All As Specified. 7 M&L 75 Mm Thick Cement Cocnrete Type C-1 1:3:6 ( Using 20Mm Graded Stone Aggregate ) As In Plinth Protection 75Mm Thick And Surface To Be Finished Even And Smooth Without Using Extra Cement Complete All As Specified. 8 Demolition Of Cement Concrete ( Reinforced ) In Landing Slab , Chullah Hoods, Manhole Covers , Roofs , Floors, Beams, Stair Case, Landing, Chajja And Similar Suspended Work Complete All As Specified. 9 M&L For 10Mm Thick Cement Plaster In Cm 1:4 Mixed With Wpc Onfair Faces Of Brick Work, Stone Work Or Concrete Surface Finished Even And Smooth Without Using Extra Cement Complete All As Specified. ( Note:- Wpc Shall Be Measured And Paid Saperately ) . 10 Supply Only Liquidwater Profing Compound As Per Is-2645 Complete All As Specified. 11 S&F In Position 6Mm To 8Mm Dia Tmt Steel Reinforcement Of Approved Make Including Cutting, Bending, Fabricating, Making Dowel, Hooks Rings Providing Spacer, Plastic Or Steel Chairs Including Binding, Welding If Required Including Wastages Etc Complete All As Specified. 12 S&F In Position 10Mm Dia And Above Tmt Steel Reinforcement Of Approved Make Including Cutting, Bending, Fabricating, Making Dowel, Hooks Rings Providing Spacer, Plastic Or Steel Chairs Including Binding, With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified. 13 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) , Complete All As Specified. 14 M&L For 75 Mm Thick Pcc 1:4:8 Type D-2 ( 40Mm Graded Stone Aggregate ) As In Sub Base Of Floor Complete All As Specified. 15 M&L For Glazed Coloured Ceramic Tiles In Vertical Surface 300X450x7mm Thickover And Including 10 Mm Rendering In Cm 1:4, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tile Complete All As Specified. 16 M&L For Non Skid Ceramic Tiles ( Coloured ) 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Laid Over And Including 15 Mm Screed Bed Or Bedding Layerin Cm 1:4Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tile Complete All As Specified. 17 M & L For Vitrifiedceramiccoloured ( Double Charge ) Tiles 10Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36Sqm , In Floors Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Cement Or Cloured To Match Over And Including 15 Mm Thick Screed Bed In Cm 1:6 To Receive Floor Tiles Complete All As Specified. 18 M & L For Vitrifiedceramiccoloured ( Double Charge ) Tiles 10Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36Sqm , In Vertical Surface Such As Skirtings , Dadosetc, Set And Jointed In Neat Cement Slurry And Pointed In White Cement Or Cloured To Match Over And Including 10 Mm Thick Rendering In Cm 1:4 To Receive Verticaltiles Complete All As Specified. 19 Dismantling Stone Slabs Of Any Description Or Thickness In Floors, Aprons Etc Laid Bedded And Pointed In Any Mortar Complete All As Specified. 20 M & L Machine Cut Kota Stone20 To 25 Mm Thick In Floor Over And Including 20Mm Thick Cm 1:3 Screed Bed, Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of Slab Incl Rubbing And Polishing Complete All As Specified. 21 All As Ser Item No 20.00, But In Skirting Over 10Mm Thick Plaster In Cm 1:4. 22 Demolition Of Cement Concrete In Ground Floors And Pavings N.Exc 15 Cm Thickness Below Or Above Ground Level Complete All As Specified. 23 M&L For 100Mm Thick Pcc 1:4:8 Type D-2 ( Using 40Mm Graded Stone Aggregate ) As In Sub Base Of Flooring Complete All As Specified. 24 M&L 60 Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block Any Shape And Size Confirming To Is 15658-2006, M-35 Grade With Grey Cement And Pigment ( Robourised ) Complete All As Specified. 25 M&L For 25 Mm Thick Sand Cushioning / Filling Under Floor Including Watering And Consolidation Complete All As Specified. 26 M&L Pre-Cast Concrete Block As In Kerb Stone ( Machine Made ) With Solid Blockstype B1 1:2:4 ( 20 Mm Graded Aggregate ) Exc 10 Cm In Width And Setting In Cement Mortar 1:6 Complete All As Specified. 27 Dismantling Of Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, Including Nainital Or Similar Pattern Roof Coverings Complete All As Specified. 28 S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.5Mm Thick Of Colour Having Tensile Strength Of 550 Mpaas In Roof Covering / Cladding To Wall, Fixed With Hot Dip Galvanised Self Drilling Fasteners With Epdm Washers ( One Fastener On Each Crest ) Complete All As Specified. 29 M&L For Preparing New Steel Surfaces Of Any Description Over10cm In Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red-Oxide Primer Complete All As Specified. 30 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Complete All As Specified. 31 S&F Rolled Mild Steel Sections As In Framing For Cladding, Glazing & The Like Fixed With Angle Cleats & Connecting Plates, Etc.Fe 410-W ( Gde-E- 250 ) Quality-A At A Height Of 8 To12 Mtr Complete All As Specified. 32 Demolition Of Brick Work Or Stone / Boulder Masonry Built In Cement Mortar Incl All Quoins, Arches, Pillars& Precast Concrete Masonry Etc Complete All As Specified. 33 M&L For Squared Rubble Walling Jodhpur Type Brought Upto Courses, Well Bonded, Bedded And Solidly Hearted, Built In Cm 1:6 Complete All As Specified. 34 All As Per Ser Item No 33.00, Here In Before But Except Stone. 35 Extra Over Item 33.00 & 34.00 For Hammer Dressing To Face Stones With Maximum Depression On Face From A Straight Edge Not Exc 20Mm & Dressing Face Beds And Joints As Specified To Squared Rubble Walling, Jodhpur Type, Brought Upto Courses Complete All As Specified. 36 Racking Out Joints / Pointing To Squared Rubble Masonary, Coursed Or Uncoursed In Cement Mortar Complete All As Specified. 37 Taking Down Chowkats Or Frames With Shutters ( Without Taking Off Shutters From The Frames ) Not Exc. 1.5 Sqm Each Complete All As Specified. 38 Taking Down Chowkats Or Frames With Shutters ( Without Taking Off Shutters From The Frames ) Exc 1.5 But N Exc 4 Sqm Each Complete All As Specified. 39 S&F Factory Made 30Mm Thick Flush Shutter, Solid Core Construction, With Block Board Core And Plywood Face Panels, Both Face Covered With Decorative Face Veneer With Lipping / Frame To Match Complete All As Specified. 40 S&F 1St Class Hard Wood 35Mm Thick Skeleton Shutters Open Rebated And Prepared To Gauze Etc Without Shah Bars, Edges Of Framing Panin Chamfered Or Rounded, Fitted With Cut And Mitred Beads Complete All As Specified. 41 S&F Galvanised Mild Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Apeture 1.18Mm And Fixed With Tinned Tacks Or Galvanised Wire Staple Complete All As Specified. 42 S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Suppling & Fixing In Opening Complete All As Specified. 43 S&F Factory Made Solid Pvc Moulded Door Shutters 28 To 30 Mm Thick ( Stiles ) , With 2, 4 Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plan Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site Complete All As Specified. 44 S&F In Repair Hasp And Staple, 75Mm Size, Safety Type, Aluminium Anodised With Mild Steel Hinge Pin Including Bolt To Hinge Plate & Fixed Withscrews, Complete All As Specified. 45 S & F 100Mm Long ( Size ) Aluminium Anodised, Barrel Tower Bolt Of Extruded Section And Fixed, Complete All As Specified. 46 S&F Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple ( Bolt Type ) 300Mm Longnot Less Than 12Mm Dia With And Incl Minimum Of 06 Bolts And Nuts, 4 On Plate And 2 On Staple And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Plate And Fixed Complete All As Specified. 47 S & F 100Mm Long ( Size ) Aluminium Anodised, Handles, Cast Type Anodised Complete All As Specified. 48 S&F 4 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5. Sq M In Each Panes Complete All As Specified. 49 S&F In Repairs Vitreous China Squatting Pan Of Orrisa Pattern Size 580Mmx440mm White With Integral Foot Rest ( Excluding Flushing Cistern And Flush Pipe Complete Incluidng Provision Of Lime Concrete Bedding Complete All As Specified. 50 Supplyand Fixing In Repairs Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Complete All As Specified. 51 S&F In Repair 15Mm Dia Bib Tap Cast Coper Alloy Chromium Plated Fancy Type Crutch Or Butter Fly Handle Screwed Down Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified. 52 S&F In Repair 15 Mm Bore Pillar Taps Fancy Type ( Any Type ) , Cast Copper Alloy With Capstan Heads, With Aerating Device Operation, Chromium Plated, Screw Down High Pressure With Or Without Lettered Hot Or Cold Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe Or Fixed Complete All As Specified. 53 S&F In Repairs 15Mm Dia Stop Valves / Angle Valve, Cast Copper Alloy , Fancy Type Chromium Plated, Screwed Down, High Pressure With Capstan Heads, Screwed Both Ends For Iron Pipe For Unions Complete All As Specified. 54 S&F 600Mmx450mx5mm Thick Looking Mirror Of Selected Quality Glass Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood Incl Framing And Fixed To Wooden Plugs With Chromium Plated Screws & Cup Washers & Fixed In Repair I / C Taking Out Old Mirror Complete All As Specified. 55 S&F In Repairs 32 Mm Dia Pvc Flexible Waste Pipe For Whb / Sink 750 Mm Long With Pvc Coupling Complete All As Specified. 56 S&F In Repairs Whb Flat Back Of Size 580X450mm , Excluding Waste Chain Plug Stopper But Incl Cp 15 Mm Pillar Tap, Brackets Incl Waste Pipe Cutting Pinning In Ends Of Brackets Complete All As Specified. 57 Taking Up Or Down Steel Tubing And Connections 20Mm Bore Pipe Complete All As Specified. 58 Refixing Old Steel Tubing And Connection In New Or Old Position ( Walls, Ceiling, Floor Etc ) Bore Of Pipe In 20Mm Dia Complete All As Specified. 59 S&F 20 Mm Boremedium Grade Galvanised Tube With And Including All Fitting Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified. 60 Taking Up Or Down Steel Tubing And Connections 15Mm Bore Pipe Complete All As Specified. 61 Refixing Old Steel Tubing And Connection In New Or Old Position ( Walls, Ceiling, Floor Etc ) Bore Of Pipe In 15Mm Dia Complete All As Specified. 62 S&F 15 Mm Bore Medium Grade Galvanised Tube With And Including All Fitting Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified. 63 Dismantling Of Water Tanks Of Capacity Exc 500 But N Exc 1000 Ltrs Complete All As Specified. 64 S&F 1000 Ltrs Capacity Rotational Moulded White Polyethylene Water Storage Tanks ( Cylinderical Vertical With Closed Top ) Vhoilsted And Fixed In Position All As Specified In Ssr Part-Icomplete All As Specified. 65 S& Fixing In Repair Ball Valve Brass High Pressure With Polythene Floatand Fly Nut Screwed On Iron Pipe Ad Fixed 20 Mm Bore Of Pipe Complete All As Specified. 66 S&F Pvc Connection 15Mm Size With Ptmt Nuts Of Length 600Mm Complete All As Specified. 67 S&F In Repair Brass Chromium Plated Tubular Towel Rail 20Mm Dia, D Type, 60Cm Long Between Flanges Complete All As Specified. 68 S&F In Repair Grating Doom 125 Mm Dia With Waste Hole Of Ptmt ( Min Wt 40 Gms ) Complete All As Specified. 69 S&F Pvc ( Swr ) Pipes Of 75 Mm Nominal Outside Diameter ( Type B With Wall Thickness 3.20 To 3.8 Mm ) Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Of 75Mm Pipe I / C Taking Out Old U / S Pvc / Ci Pipe With Fittings Complete All As Specified. 70 S&F Pvc ( Swr ) Pipes Of 110 Mm Nominal Outside Diameter ( Type B With Wall Thickness 3.20 To 3.8 Mm ) Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Of 75Mm Pipe I / C Taking Out Old U / S Pvc / Ci Pipe With Fittings Complete All As Specified. 71 S&F Pvc ( Swr ) Pipes Of 75 Mm Bore Single Socketed In Any Length Fixed To Wall I / C Taking Out Old U / S Pvc / Ci Pipe With Fittings Complete All As Specified. 72 S&F Pvc ( Swr ) Pipes Of 110 Mm Bore Single Socketed In Any Length Fixed To Wall I / C Taking Out Old U / S Pvc / Ci Pipe With Fittings Complete All As Specified. 73 S&F Pvc ( Swr ) Floor Trap, Plain With Grating Including Joining With Solvent Cement 75 Mm Dia Complete All As Specified. 74 S&F Pvc ( Swr ) Bend 75Mm Bore Of Any Radius Complete All As Specified. 75 S&F Pvc ( Swr ) Bend 75Mm Bore Of Any Radius With Access Door Complete All As Specified. 76 S&F Pvc ( Swr ) Bend 110 Mm Bore Of Any Radius Complete All As Specified. 77 S&F Pvc ( Swr ) Bend 110 Mm Bore Of Any Radius With Access Door Complete All As Specified. 78 S&F Pvc ( Swr ) 75 Mm Branch Piece, Single ( Single Y ) Equal Or Unequal With Access Door Complete All As Specified. 79 S&F Pvc ( Swr ) 110 Mm Branch Piece, Single ( Single Y ) Equal Or Unequal With Access Door Complete All As Specified. 80 S&F Pvc ( Swr ) Branch Piece Single ( Single T ) Equal Or Unequal Of 110 Mm Bore With Access Door Complete All As Specified. 81 S&F Pvc ( Swr ) Branch Piece Single ( Double T ) Equal Or Unequal Of 110 Mm Bore With Access Door Complete All As Specified. 82 S&F Pvc ( Swr ) Branch Piece Single ( Single T ) Equal Or Unequal Of 75 Mm Bore With Access Door Complete All As Specified. 83 S&F Pvc ( Swr ) Branch Piece Single ( Double T ) Equal Or Unequal Of 75 Mm Bore With Access Door Complete All As Specified. 84 S&F Pvc ( Swr ) Vent Cowl 110 Mm Complete All As Specified. 85 S&F In Repair Bands, Straps, Supports Or Stays For Pvc Swr Pipes For 50Mmx 5 Mm Flat Iron And 16 Mm Dia Round Iron Stays Incl Bolts And Nuts And Securing Ends Of Stays To Walls Or Roof Etc, Complete All As Specified. 86 S&F For 75Mm Thick Steel Fibre Reinforced ( Sfrc ) Man Hole Cover With Iron Frames ( Medium ) Complying To The Standard Specifications As Mentioned In The Is 12592 Bis Standard, Minimum Load Bearing Capacity 5 Ton / Sqm, In Square, Rectangular Or Circular Shape Complete All As Specified. 87 Preparing Old Painted Steel Surfaces Of Any Description Over 10Cm Grith Or Width And Applying One Coat Of Synthetic Enamel Paintcomplete All As Specified. 88 Preparing Old Painted Wood Or Wood Base Surfaces Of Any Description Over 10Cm Grith Or Width, Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified. 89 M&L For Preparing Newly Plastered Surfaces & Applying Three Coat Of White Wash On Ceiling Complete All As Specified. 90 Preparing Old Decorated Plastered Or Unplastered Surfaces By Brooming Down Of Steel Wire Brushing, Scrapping Down Moulds Mass And Efforescent Salt And Treating Oil Greasy Spots And Stopping Of Distemper And Applying One Coat Of Oil Emulsion ( Bound ) Distemper On Wall Complete All As Specified. 91 Preparing New Plastered Surfaces By Brooming Down Of Steel Wire Brushing, Scrapping Down Moulds Mass And Efforescent Salt And Applying Two Coat Of Oil Emulsion ( Bound ) Distemper On Wall Complete All As Specified. 92 Preparing New Decorated Plastered Or Unplastered Surfaces By Brooming Down Of Steel Wire Brushing, Scrapping Down Moulds Mass And Efforescent Salt And Treating Oil Greasy Spots And Applying Two Coat Of Cement Base Paint On Wall Complete All As Specified. 93 M&L For Carring Out Water Proofing Treatment For Roof In Following Stages :- ( I ) M&L For Rendering 10Mm Thick In Cm 1:4 Mixed With Integral Water Proofing Liquid All As Per Manufacturer Instruction Over Concrete Surfaces Finished Even And Smooth Without Using Extra Cement. ( Ii ) First Coat Of Bitumen Primer Confirming To Is 3384 @ 0.40 Kg / Sqm Over Plastered Surfaces. ( Iii ) Second Coat Of Binding Material Using Blown Type Bitumen Confirming To Is -702 Grade 85 / 25@ 1.20 Kg Per Sqm ( Iv ) Third Layer Of App Modified Polymeric Membrane Centre Core Of 20 Micron Hmhdpe, Other Film 20 Micron Thickness 3 Mm Having Weight 2.25 Kg / Sqm. ( V ) Final Coat Of Binding Material Using Blown Type Bitumen Confirming To Is 702 Of Grade 85 / 25@ 1.2 Kg / Sqm ( Vi ) Final And Top Most Layer Of Surface Which Will Act As Protective Layer Shall Be Of 40Mm Thick Pcc 1:2:4 Type B1 Using 20Mm Graded Aggregate And Cutting V Joints @ 60Cm Bothways And Filling With Bitumen 85 / 25@ 1.2 Kg / Sqm. ( Vii ) Ddemolition Of Existing Roof Treatment Of Pcc Padding & Cement Plaster By Wire Brush Scrubbing Down With Water And Removing The Dust Debris Etc To A Distance 50Mtr But N Exc 250Mtr From The Work Site Complete All As Specified.Note : Rate Quoted By The Contractor Shall Deemed To Include. 94 Taking Down Copper / Aluminium Point Wiring ( Light, Fan, Socket Or Power ) Complete, Including Fixture And Fittings Such As Switches, Ceiling Roses, Sockets, Lamp Holder And Conduit Etc. And Making Good Disturbed Surfaces Of Walls, Floors, Etc Complete All As Specified.Note:- The Damaged Surfaces To Be Made Good With Plastering& Applying Required Coats Of Finishing Tomatching With Existing Surfaces As Directed By Engineer-In-Charge. Cost Of The Same Shall Deemed To Be Included In Quoted Rates. 95 M&L For Point Wiring With Two Single Core 1.5 Sq.Mm Size Multistranded Frls Copper Conductor Pvc Insulated Cables And One Single Core 1.5 Sq.Mm Size Green Colour Pvc Insulated, Multistranded Copper Conductor Pvc Cable As Earth Continuity Conductor, 1100 Volts Grade, Complete Drawn In And Including Rigid Pvc Conduit And Conduit Accessories, Confirming To Is Specifications, Concealed In Wall Fixing On Ceiling / Trusses With Suitable Clamps , Screws Etc, Including 1.22 Mm Thick Ms Terminal Boxes With 3 Mm Thick Plastic Laminated Sheet Top Cover Fixed With Cadmium Plated Iron Screws For Mounting Switches, Sockets, Fan Regulators Etc., Including Connecting Up And Testing , All As Specified And As Directed For One Light Point Controlled By One Switch Complete All As Specified. 96 All As Per Ser Item No 95.00, But One Fan / Exhaust Fan Point Controlled By One Switch. 97 All As Per Ser Item No 95.00, But One Switch Socket Out Let Point 5 Amps On Independent Board 98 All As Per Ser Item No 95.00, But One Switch Socket Out Let Point 5 Amps On Same Board 99 All As Per Ser Item No 95.00, Herein Before But With 4 Sqmm Cable For One 3 Pin 15 Amp Switch Socket Outlet And Using 4 Sqmm Pvc Single Core Copper Conductor Cable Multistranded As Earth Wire Complete All As Specified. 100 Supply And Fixing Switch Piano Flush Type 5 Amp Single Pole, One Way Complete All As Specified. 101 Supply And Fixing For Ceiling Rose Surface Bakelite 65 X 50 Mm Three Terminal Complete All As Specified. 102 Supply And Fixing Socket Outlet 5 Pin 5 Amps, Flush Type Complete All As Specified. 103 Supply And Fixing Socket Outlet Combination 2 In 1 3 Pin 6 And 16 Amp Flush Type Universal Complete All As Specified. 104 Supply And Fixing Socket Outlet Combination 2 In 1 3 Pin 6Flush Type Universalcomplete All As Specified. 105 Supply And Fixing Lamp Holder Pvc / Polycarbonate Type With Cord Grip Cap Suitable For Pendant Fitting Complete All As Specified. 106 S&F Powder Coated Sheet Metal Enclosures Mccb Vtpn Db, Double Door, Tripple Pole And Neutral, 4 Way 415 Volts Fitted With Insulated Vertical Phase Bus Bar / Neutral Bar With Shround Earth Bar Cement Spill Proctector Interconnecting Wire Set Cable Ties Blanking Plates And Circuit Indentificationlables Etc All As Per Is-8623-1 Ik-09 Complete All As Specified. 107 Supply And Fixing Mccb Tpn 63 Amps 415 Volts. 10Kaadjustableoverload Setting L &Fixed Magnetic Settingcomplete All As Specified. 108 Supply And Fixing Mcb Spn 40 Amps240 Volts Complete All As Specified. 109 Supply And Fixing In Repair Powder Coated Sheet Metal Enclosuresdb, Double Door, Single Pole And Neutral 8 Way 240 Volt Fitted With Bus Bar, Din Channel, Neutral Link And Incoming Contact Complete All As Specified. 110 Supply And Fixing In Repair Mcb Spn 6-32 Amps240 Volts Complete All As Specified. 111 Supply And Fixing In Repair Mcb Sp 6 Amps To 32 Amps 230 Volt Complete All As Specified. 112 S&F In Repair Surface Mounting Batten Tube Light Fitting, Integrated Polycarbonate Led Channel With White Acrylic Cover Complete Suitable For And Including Lamp Led 1X20 Watt, ( 4 Feet ) Fixed Properly On Wall Surface And Connecting Complete From Ceilling Rose To Fitting By Three Core Copper Conductor Cable Of Overall Sheathed Size 2.5 Sqmm Which Shall Be Passed Through Pvc Flexible Conduit Complete All As Specified. 113 S&F In Repair Surface Mounting Batten Tube Light Fitting, Integrated Polycarbonate Led Channel With White Acrylic Cover Complete Suitable For And Including Lamp Led 1X10watt, ( 2 Feet ) Fixed Properly On Wall Surface And Connecting Complete From Ceilling Rose To Fitting By Three Core Copper Conductor Cable Of Overall Sheathed Size 2.5 Sqmm Which Shall Be Passed Through Pvc Flexible Conduit Complete All As Specified. 114 S&Fin Repair Building Security Light Led Fitting 35 Watt 230V Ac Outdoor Type With High Pressure Die Cast Aluminum Housing And Heat Resistant , Epoxy Powder Coated Dark Graphite Grey Colour Finish And Prismatic Polycarbonate Cover With Individual Led Lences Suitable For Including Lamp Led 35 Watt, Fixed / Connect Properly At Directed Location On Building With Ip 65 / 66 Protection Complete All As Specified. 115 Supply And Fixing Bracket For Street Light Fittings Of Any Size Made Out Of Gi Pipe Medium Grade 32 Mm Dia 1.25 Mtr Length Bend To Required Size And Shape Including Provision Of Clamps And Fittings In Position And Two Coat Of Aluminum Paint Over A Coat Of Red Oxide Primer All As Specified And Directed Including Taking Down Old Bracket Complete All As Specified. 116 Taking Down Old Fan And S&Fceiling Fan 1200Mm Sweepsingle Phase 230 Volts Ac, Min Air Delivery 210 Cfm With Service Valve 6.00 Bee 5 Star Rating With Brushless Direct Current Motor ( Bldc ) Withblade , Down Roads Electronic Regulator Andcomplete Accessories Complete Fixed Properly On Wall Surface With The Provisioning Of Suitable Sizes Of Rag Bolts, Nuts, Washer And To Connect By Using Cable Pvc Insulated Copper Stranded Conductor Of Size 2.5 Sqmm 3 Core And Overall Pvc Sheathed Which Shall Be Passed Through Pvc Flexible Conduit Of Length Not Exceeding 0.50 Mtr All As Reqd And Complete All As Specified.Note:- Taking Down Old Ceiling Fan And Deposit To Age E / M Store. 117 Taking Down Old Fan And S&F For Steel Body Exhaust Fan 300 Mm Sweep, Single Phase 230 Volts Ac, 900 Rpmfour Blade With Louver Shutters Complete Fixed Properly On Wall Surface With The Provisioning Of Suitable Sizes Of Rag Bolts, Nuts, Washer And To Connect By Using Cable Pvc Insulated Copper Stranded Conductor Of Size 2.5 Sqmm 3 Core And Overall Pvc Sheathed Which Shall Be Passed Through Pvc Flexible Conduit Of Length Not Exceeding 0.50 Mtr Complete All As Specified.Note:- Taking Down Old Exhust Fan And Deposit To Age E / M Store. 118 Taking Down Old Water Heater And Supply, Fixed And Tested Electric Water Heater Storage Type Steel Body With Copper Inner Tank And Heating Element Upto 2 Kw Capacity 25 Ltr Bee 5 Starfor 230 Volts 50 Hzcomplete With All Accessoriessuch As Safety Valve , Thermostate, Nrv, Connection Pipe Etc Complete Fixed Properly On Wall Surface With Provisioning Of Suitable Size Of Faster Bolts, Nuts Washer And To Connect By Using Pvc Cable Complete All As Specified. Note:- Taking Down Old Water Heaterand Deposit To Age E / M Store. 119 M & L For Building Earthing Complete With Galvanised Steel Earth Plate Electrode 60 X 60X 6Mm Burried Directly In Ground ( Earth Pit Not Less Than 2.25 Mtr Deep Below Ground Level ) With Top Edged Of The Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galavanised Iron Earth Lead By Means Ofbolt, Nut, Check Nut And Washer Of Galavanised Iron Wire 4Mmas Earthing Lead As Shown In Electrical Plate No 3 Of Ssr Part I Connected To Earthing Test Point All As Specified Or Indicated Including Testing On Completion Including Necessary Excavation And Earth Work Inhard / Dence Soil, Earth Pit In Pcc 1:3:6 Typec1 Using 20Mm Stone Aggreate, Funnel, 20Mm Dia Gi Medium Grade Water Pipe, 15Mm Dia Gi Light Grade Earth Lead Protection Pipe, Ci Frame And Cover, Wire, Copper Lugs, Wire Mesh, Charcoal Or Coke And Common Salt In Alterative Layer All Around The Earth Electrode Compacted Thickness 15 Cm Including Excavation And Earth Work Pit Cover Including Disposal Of Surplus Soil To A Distance Not Excessding 50M, Complete Testing On Completion All Complete As Shown In Electrical Plate No 3 Of Ssr Part I 2009 Complete All As Specified.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	08-Jan-2024	Corrigendum No 1	BOQ	18-01-2024
2	08-Jan-2024	Corrigendum No 1	BOQ	18-01-2024
3	18-Jan-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	25-01-2024

INR 500 /-

INR 34160.0 /-

INR 17.08 Lakhs /-

Name of Work: SPL REPAIR IN BLDG NO P-11 AT NAGTALAO UNDER GE BANAR

Sl. No.	Item Description
1	Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified.
2	M&L for 10mm thick cement plaster in CM 1:6 onfair faces of brick work, stone work or concrete surface finished even and smooth without using extra cement complete all as specified.
3	M&L for 15mm thick cement plaster in CM 1:4 on uneven surface, stone work or concrete surface finished even and smooth without using extra cement complete all as specified.
4	M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement complete all as specified.
5	Demolition of cement concrete (unreinforcement) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified.
6	M&L hardcore of gauge nexc 63mm broken stone or boulders deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surface complete all as specified.
7	M&L 75 mm thick Cement cocnrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in plinth protection 75mm thick and surface to be finished even and smooth without using extra cement complete all as specified.
8	Demolition of cement concrete (reinforced) in landing slab ,chullah hoods, manhole covers , Roofs ,Floors, beams, stair case, landing, chajja and similar suspended work complete all as specified.
9	M&L for 10mm thick cement plaster in CM 1:4 mixed with WPC onfair faces of brick work, stone work or concrete surface finished even and smooth without using extra cement complete all as specified. (Note:- WPC shall be measured and paid saperately).
10	Supply only liquidwater profing compound as per IS-2645 complete all as specified.
11	S&F in position 6mm to 8mm dia TMT steel reinforcement of approved make including cutting, bending, fabricating, making dowel, hooks rings providing spacer, plastic or steel chairs including binding, welding if required including wastages etc complete all as specified.
12	S&F in position 10mm dia and above TMT steel reinforcement of approved make including cutting, bending, fabricating, making dowel, hooks rings providing spacer, plastic or steel chairs including binding, with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
13	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified.
14	M&L for 75 mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in sub base of floor complete all as specified.
15	M&L for Glazed coloured ceramic tiles in vertical surface 300x450x7mm thickover and including 10 mm rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.
16	M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over and including 15 mm screed bed or bedding layerin CM 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.
17	M & L for Vitrifiedceramiccoloured (Double Charge) tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm , in floors etc, set and jointed in neat cement slurry and pointed in white cement or cloured to match over and including 15 mm thick screed bed in CM 1:6 to receive floor tiles complete all as specified.
18	M & L for Vitrifiedceramiccoloured(Double Charge) tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm , in vertical surface such as skirtings , dadosetc, set and jointed in neat cement slurry and pointed in white cement or cloured to match over and including 10 mm thick rendering in CM 1:4 to receive verticaltiles complete all as specified.
19	Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified.
20	M & L machine cut kota stone20 to 25 mm thick in floor over and including 20mm thick CM 1:3 screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing complete all as specified.
21	All as Ser item No 20.00, but in skirting over 10mm thick plaster in CM 1:4.
22	Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified.
23	M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified.
24	M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 Grade with grey cement and pigment (Robourised) complete all as specified.
25	M&L for 25 mm thick sand cushioning/filling under floor including watering and consolidation complete all as specified.
26	M&L Pre-cast concrete block as in Kerb Stone (Machine made) with solid blocksType B1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified.
27	Dismantling of Plain or corrugated steel sheeting, any gauge,thickness, including Nainital or similar pattern roof coverings complete all as specified.
28	S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with hot dip galvanised self drilling fasteners with EPDM washers (one fastener on each crest) complete all as specified.
29	M&L for preparing new steel surfaces of any description over10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified.
30	Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
31	S&F Rolled mild steel sections as in framing for cladding, glazing & the like fixed with angle cleats & connecting plates, etc.Fe 410-W (Gde-E- 250) quality-A at a height of 8 to12 mtr complete all as specified.
32	Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars& precast concrete masonry etc complete all as specified.
33	M&L for squared rubble walling Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.
34	All as per Ser item No 33.00, here in before but except stone.
35	Extra over item 33.00 & 34.00 for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face beds and joints as specified to squared rubble walling, jodhpur type, brought upto courses complete all as specified.
36	Racking out joints/ pointing to squared rubble masonary, coursed or uncoursed in cement mortar complete all as specified.
37	Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified.
38	Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but n exc 4 sqm each complete all as specified.
39	S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneer with lipping/frame to match complete all as specified.
40	S&F 1st class hard wood 35mm thick skeleton shutters open rebated and prepared to gauze etc without shah bars, edges of framing panin chamfered or rounded, fitted with cut and mitred beads complete all as specified.
41	S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of apeture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified.
42	S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening complete all as specified.
43	S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified.
44	S&F in repair Hasp and staple, 75mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate & fixed withscrews, complete all as specified.
45	S & F 100mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified.
46	S&F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) 300mm longnot less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed complete all as specified.
47	S & F 100mm long (size) aluminium anodised, handles, cast type anodised complete all as specified.
48	S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5. sq m in each panes complete all as specified.
49	S&F in repairs vitreous china squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding complete all as specified.
50	Supplyand fixing in repairs PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density complete all as specified.
51	S&F in repair 15mm dia bib tap cast coper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified.
52	S&F in repair 15 mm bore pillar taps fancy type (any type), cast copper alloy with capstan heads, with aerating device operation, chromium plated, screw down high pressure with or without lettered "Hot or Cold" long screwed shanks and fly nuts, screwed for iron pipe or fixed complete all as specified.
53	S&F in repairs 15mm dia Stop valves/Angle valve, cast copper alloy , fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe for unions complete all as specified.
54	S&F 600mmx450mx5mm thick looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood incl framing and fixed to wooden plugs with chromium plated screws & cup washers & fixed in repair i/c taking out old mirror complete all as specified.
55	S&F in repairs 32 mm dia PVC flexible waste pipe for WHB/Sink 750 mm long with PVC coupling complete all as specified.
56	S&F in repairs WHB flat back of SIze 580x450mm , excluding waste chain plug stopper but incl CP 15 mm Pillar Tap,brackets incl waste pipe cutting pinning in ends of brackets complete all as specified.
57	Taking up or down steel tubing and connections 20mm bore pipe complete all as specified.
58	Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 20mm dia complete all as specified.
59	S&F 20 mm boremedium grade "galvanised" tube with and including all fitting fixed to walls and ceiling or laid in floors complete all as specified.
60	Taking up or down steel tubing and connections 15mm bore pipe complete all as specified.
61	Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 15mm dia complete all as specified.
62	S&F 15 mm bore medium grade "galvanised" tube with and including all fitting fixed to walls and ceiling or laid in floors complete all as specified.
63	Dismantling of water tanks of capacity exc 500 but n exc 1000 ltrs complete all as specified.
64	S&F 1000 ltrs capacity rotational moulded white polyethylene water storage tanks (cylinderical vertical with closed top)vhoilsted and fixed in position all as specified in SSR Part-Icomplete all as specified.
65	S& Fixing in repair ball valve brass high pressure with polythene floatand fly nut screwed on iron pipe ad fixed 20 mm bore of pipe complete all as specified.
66	S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified.
67	S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified.
68	S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified.
69	S&F PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified.
70	S&F PVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified.
71	S&F PVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified.
72	S&F PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified.
73	S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified.
74	S&F PVC (SWR) bend 75mm bore of any radius complete all as specified.
75	S&F PVC (SWR) bend 75mm bore of any radius with access door complete all as specified.
76	S&F PVC (SWR) bend 110 mm bore of any radius complete all as specified.
77	S&F PVC (SWR) bend 110 mm bore of any radius with access door complete all as specified.
78	S&F PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal with access door complete all as specified.
79	S&F PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal with access door complete all as specified.
80	S&F PVC(SWR) branch piece single(Single T) equal or unequal of 110 mm bore with access door complete all as specified.
81	S&F PVC(SWR) branch piece single (Double T) equal or unequal of 110 mm bore with access door complete all as specified.
82	S&F PVC(SWR) branch piece single (Single T) equal or unequal of 75 mm bore with access door complete all as specified.
83	S&F PVC(SWR) branch piece single (Double T) equal or unequal of 75 mm bore with access door complete all as specified.
84	S&F PVC (SWR) vent cowl 110 mm complete all as specified.
85	S&F in repair bands, straps, supports or stays for PVC SWR pipes for 50mmx 5 mm flat iron and 16 mm dia round iron stays incl bolts and nuts and securing ends of stays to walls or roof etc, complete all as specified.
86	S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified.
87	Preparing old painted steel surfaces of any description over 10cm grith or width and applying one coat of synthetic enamel paintcomplete all as specified.
88	Preparing old painted wood or wood base surfaces of any description over 10cm grith or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified.
89	M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling complete all as specified.
90	Preparing old decorated plastered or unplastered surfaces by brooming down of steel wire brushing, scrapping down moulds mass and efforescent salt and treating oil greasy spots and stopping of distemper and applying one coat of oil emulsion (bound) distemper on wall complete all as specified.
91	Preparing new plastered surfaces by brooming down of steel wire brushing, scrapping down moulds mass and efforescent salt and applying two coat of oil emulsion (bound) distemper on wall complete all as specified.
92	Preparing new decorated plastered or unplastered surfaces by brooming down of steel wire brushing, scrapping down moulds mass and efforescent salt and treating oil greasy spots and applying two coat of cement base paint on wall complete all as specified.
93	M&L for carring out water proofing treatment for roof in following stages :- (i) M&L for rendering 10mm thick in CM 1:4 mixed with integral water proofing liquid all as per manufacturer instruction over concrete surfaces finished even and smooth without using extra cement. (ii) First coat of bitumen primer confirming to IS 3384 @ 0.40 kg/Sqm over plastered surfaces. (iii) Second coat of binding material using blown type bitumen confirming to IS -702 grade 85/25@ 1.20 kg per sqm (iv) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE, other film 20 micron thickness 3 mm having weight 2.25 kg/sqm. (v) Final coat of binding material using blown type bitumen confirming to IS 702 of grade 85/25@ 1.2 Kg/Sqm (vi) Final and top most layer of surface which will act as protective layer shall be of 40mm thick PCC 1:2:4 type B1 using 20mm graded aggregate and cutting V joints @ 60cm bothways and filling with bitumen 85/25@ 1.2 kg/sqm. (vii) Ddemolition of existing roof treatment of PCC padding & cement plaster by wire brush scrubbing down with water and removing the dust debris etc to a distance 50mtr but n exc 250mtr from the work site complete all as specified. Note : Rate quoted by the contractor shall deemed to include.
94	Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, lamp holder and conduit etc. and making good disturbed surfaces of walls, floors, etc complete all as specified. Note:- The damaged surfaces to be made good with plastering& applying required coats of finishing tomatching with existing surfaces as directed by Engineer-in-charge. Cost of the same shall deemed to be included in quoted rates.
95	M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLS copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including rigid PVC CONDUIT and conduit accessories,confirming to IS specifications,concealed in wall fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for One light point controlled by one switch complete all as specified.
96	All as per Ser item No 95.00, but One fan/ exhaust fan point controlled by one switch.
97	All as per Ser item No 95.00, but One switch socket out let point 5 Amps on independent board
98	All as per Ser item No 95.00, but One switch socket out let point 5 Amps on same board
99	All as per Ser item No 95.00, herein before but with 4 sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified.
100	Supply and fixing switch piano flush type 5 Amp single pole, one way complete all as specified.
101	Supply and fixing for ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified.
102	Supply and fixing socket outlet 5 pin 5 Amps, flush type complete all as specified.
103	Supply and fixing Socket outlet combination 2 in 1 3 pin 6 and 16 amp flush type universal complete all as specified.
104	Supply and fixing Socket outlet combination 2 in 1 3 pin 6flush type universalcomplete all as specified.
105	Supply and fixing lamp holder PVC/polycarbonate type with cord grip cap suitable for pendant fitting complete all as specified.
106	S&F powder coated sheet metal enclosures MCCB VTPN DB, double door, tripple pole and neutral, 4 way 415 volts fitted with insulated vertical phase bus bar/neutral bar with shround earth bar cement spill proctector interconnecting wire set cable ties blanking plates and circuit indentificationlables etc all as per IS-8623-1 IK-09 complete all as specified.
107	Supply and fixing MCCB TPN 63 Amps 415 volts. 10kAAdjustableoverload setting l &fixed magnetic settingcomplete all as specified.
108	Supply and fixing MCB SPN 40 Amps240 volts complete all as specified.
109	Supply and fixing in repair powder coated sheet metal enclosuresDB, double door, single pole and neutral 8 way 240 Volt fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified.
110	Supply and fixing in repair MCB SPN 6-32 Amps240 volts complete all as specified.
111	Supply and fixing in repair MCB SP 6 Amps to 32 Amps 230 Volt complete all as specified.
112	S&F in repair surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x20 Watt,(4 feet) fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete all as specified.
113	S&F in repair surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x10Watt,(2 feet) fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete all as specified.
114	S&Fin repair building security light LED fitting 35 watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant , epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 35 watt, fixed / connect properly at directed location on building with IP 65/66 protection complete all as specified.
115	Supply and fixing bracket for street light fittings of any size made out of GI pipe medium grade 32 mm dia 1.25 mtr length bend to required size and shape including provision of clamps and fittings in position and two coat of aluminum paint over a coat of red oxide primer all as specified and directed including taking down old bracket complete all as specified.
116	Taking down old fan and S&FCeiling fan 1200mm sweepsingle phase 230 volts AC, min air delivery 210 CFM with service valve 6.00 BEE 5 star rating with brushless direct current motor (BLDC) withblade ,down roads electronic regulator andcomplete accessories complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and complete all as specified. Note:- Taking down Old Ceiling fan and deposit to AGE E/M Store.
117	Taking down old fan and S&F for Steel body Exhaust Fan 300 mm sweep, single phase 230 volts AC, 900 RPMfour blade with louver shutters complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr complete all as specified. Note:- Taking down Old Exhust fan and deposit to AGE E/M Store.
118	Taking down old water heater and Supply,fixed and tested Electric water heater storage type steel body with copper inner tank and heating element upto 2 Kw capacity 25 Ltr BEE 5 Starfor 230 volts 50 Hzcomplete with all accessoriessuch as safety valve ,thermostate,NRV,connection pipe etc complete fixed properly on wall surface with provisioning of suitable size of faster bolts,nuts washer and to connect by using PVC cable complete all as specified. Note:- Taking down Old Water Heaterand deposit to AGE E/M Store.
119	M & L for building earthing complete with galvanised steel earth plate electrode 60 x 60x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level,connected to galavanised iron earth lead by means ofbolt, nut, check nut and washer of galavanised iron wire 4mmas earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work inhard/dence soil, earth pit in PCC 1:3:6 typeC1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs,wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 complete all as specified.