Road And Building Department-RBD has published Tender For Redevelopment Of Chandeswar Temple, Tangi, Khordha. Submission Date for this Tender is 03-01-2024. Temple Tenders in khordha Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in Stoney earth soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the earth transported by transport vehicles as directed by the Engineer-In-charge. |
| 2 | Filling Foundation and plinth with avelable excavated Earth including leveling and watering, all labour and matrials complete. |
| 3 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction ofEngineer-In-charge. |
| 4 | Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. |
| 5 | Fixing of chequred tiles in floors on 20mm thick bed of cement mortar (1:4) jointed with white cement including all cost. |
| 6 | Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compactionlaid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 |
| 7 | First class Fly ash Brick masonry in F&P usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 8 | 12mm cement plaster on external RCC/brick surfaces incement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 9 | 16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 10 | (2ndt floor) |
| 11 | 6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 12 | Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved byEngineer-In-Charge) for Courtyard and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. |
| 13 | Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
| 14 | Providing and applying to outside walls with two or more coats ofAnti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete. |
| 15 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
| 16 | Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2(1cement:2sand:2graded stone aggregate of 6 mm nominal size) mixed with approved water proof compound as per manufacturer"s specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor. |
| 17 | Supplying, fitting & fixing of Manglore tile of size 1"-4" x 0"-10" on roof top over 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete. |
| 18 | First class Fly ash Brick masonry in Superstructure usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 19 | Ground floor |
| 20 | (Terrace floor) |
| 21 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 22 | a) Footing Base. |
| 23 | b) Columns. |
| 24 | (Terrace floor) |
| 25 | c) Plinth Beams |
| 26 | d) Lintel beam . |
| 27 | e) Chajja. |
| 28 | f) Roof Beams. |
| 29 | g) RCC Slab . |
| 30 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Bindingwire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars. |
| 31 | (Terrace Floor) |
| 32 | Providing and laying Vitrifiedfloor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st qualityof NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction ofEngineer-In-Charge at all floors and all heights. |
| 33 | Providing and layingVitrified tiles in skirting dados 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights. |
| 34 | Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approvedshade as per the instructions of the manufacturers; giving uniform shade etcin all heights of walls etc. including interiorwall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. |
| 35 | Providing and fixing seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other framesfixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs ordash fasteners of required dia and length as per drawing / specification, at all floors and all heights. |
| 36 | Providing and fixing ISI Marked 35mm thick flush door shutters conforming to IS : 2202 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and free veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete. |
| 37 | Supplying, Fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, dhutters and all fitting and fixtures. |
| 38 | Supplying, fitting and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL Veka ltd) Ventilator/Top hung - 60 Series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames,75mmx60mmx2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated and wellded through fusion welding, the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathring seal resistant accessories like clipping, locking system made up aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site, etc. including cost and conveyance of all materials, accessories, labour charges and product confirming to ASTMD 638-14,EN-477-95 and other applicable codes and standards. |
| 39 | Providing and fixing of factory made (NCL/VEKA LTD or equivalent )of colour UPVC sliding window 3 trackor openable (approved colour of Frame ) complete with U value=1.9-1.3 W/m 2k/3k, flame resistance, self extinguishing, lead free comprising colour UPVC multi chambered frame having in built UPVC roller track on top and UPVC sash with wall thickness of 2.3mm duly reinforced with G.I section 2.6 mm where ever required. All corners of frame and sash will be fusion welded. After placing12.5mm laminate glass (6mm clear toughtened +1.5 pvg laminate+5mm clear glass) Annealed glass in the sash, with suppord of hurricane bar for high wind support. uPVC glazing bead, interlock, EPDM gasket brush shall be provided including multi lock and rollers & proper drainage system shall be provided. window frame will be fixed to the wall with 100mm long and 8mm dia.Fasteners and after fixing the gap between frame and adjucent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per approved drawing & direction of the Engineer -In-Charge. |
| 40 | Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (Allsteel sections contractor"s own supply). |
| 41 | Supplying, fitting and fixing of G.I. grills in windows made out of G.I. square bars, angles, flats, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete. |
| 42 | Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete. |
| 43 | Providing Fly ash bricks masonry work using(250mmx120mmx80mm size) having crushing strengthnot less than 75Kg/Sqcm in cement mortar (1:4). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes& royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . |
| 44 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 65 x 150 mm |
| 45 | Providing & Fixing Antiskid vitrified Floor tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete. |
| 46 | Supplying, fitting & fixing of F.R.P door frame of size 75mm x 100 mm including drilling holes in wall including the cost of all materials, rawl plug, screws, cost of all labour, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 47 | Supplying, fitting, fixing of factory made single leaf rigid F.R.P composite door shutter of 32 mm thick, laminated with to G.R.P skins with wood grain finished including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. including the cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 48 | Supplying ,Fitting and fixing of stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, pollishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 49 | Painting two coats with Water soluble weather coatpaints of approved shade of approved make or equivalent overout side brick wall over a coat of primer, by means of brush to outside surface of newwalls after scraping, cleaning the surface including all cost of materials, scaffolding, labour, watering & curingT&P etc complete as per direction ofEngineer -in-charge. |
| 50 | (Terrace Floor) |
| 51 | Providing & laying Kota stone slab flooring of 16mm (average) thick over a 20mm thick based of cement mortar 1:4to a proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including finishing the joints with epoxy based water proofing grout to match the colour and shade of the flooring complete as per the design and drawings. Including cost of all labour, materials, taxes , royalties, loading and unloading, conveyance, sundries, T & P etc. All complete as per drawing and direction of the Engineer -in-charge |
| 52 | Providing and fixing 10mm thick Granite stone Cladding(sample of Granite stone should be approved byEngineer-In-Charge) for Temple External & Internal Wall and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 12mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. |
| 53 | Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 54 | Providing & Fixing GlazedTiles in Dados Skirting &Risers ofSteps of 12mm thick cement plaster (1:3)jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete. |
| 55 | carrige of surplus earth by mechanical means as per the instruction Engineer-in -charge. |
| 56 | Internal Electrical Work |
| 57 | Sub-Head I (modular Wiring Items) |
| 58 | Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makeA catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type ( falme retradant type)switch ISI marked Make-Schneider(Zencelo)/legrand( myrious) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( falme retradant type) Make-Schneide/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approvedof suitable size, modular box with 1.5 sq. Mm FRLSHPVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable. All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 59 | GROUP-A |
| 60 | GROUP-B |
| 61 | GROUP-C |
| 62 | Group control of point in Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake-Make- Finolex/Anchor/Polycab/HAVELLSor equievalant reputed make A catagory ISI marked as approved as approved20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approvedwith 6A modular type(( flame retradant type)) switch ISI markedMake-Schneider/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approved,and ceiling rose ISI markedMake-Schneider)/legrand /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box withmetallic cover plate (both side) falme retradant type) Make-Schneider/legrand /Panasonicor equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 63 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider/legrand /Panasonic or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for for QUTS.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 64 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicor equievalant make & model ISI marked as approved , complete suitable .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 65 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( falme retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved,(For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 66 | Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6Aswitch & socket(modular type) ( ( falme retradant type) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicr equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable forfor OFFICE.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 67 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZHinsulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, inrecessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalantISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 68 | 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 69 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) |
| 70 | 4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallicheavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) |
| 71 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOORPOINT/DG PANELESSENTIAL LOAD) (2X4+1X1.5) |
| 72 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5) |
| 73 | Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 74 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling roseas per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 75 | Supplying,fixing of Blanking plate(modular type)( flame retradant type))in existing switch box(anti bactorial & falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonic complete suitablestandard hospital.Itshould be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 76 | Sub-Head II (Light fitting Fixture & Fan) |
| 77 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep(Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. |
| 78 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha /Halonix or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) |
| 79 | Supplying and fixing of Energy efficient surface mounted square shape 18 W LED luminaireof dimension of 225x 225 x 35 mm consists ofwhite powder coated , die-castAlluminiumhousingwith high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not lessthan 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)and all other accessories suitable for operationon 220 V to 240 Vsupply as required as per direction of Engg.-in-Charge. ( Make : (Make: wipro LD80-171-60-XX-SM or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years |
| 80 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalantreputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . |
| 81 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO Model No:LL20-111-XXX-60-NE orsimilar modelof PHILIPS/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 82 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 83 | Supplying of 18 watt (100 Lm/W) LED Inverter based 4 feet Batten fitting with2 to 3 hour battery backup .Halonix Cat Ref No: HLB-08-18-CW-INV,(Halonix/Osram/LT/Philips/Regent ) |
| 84 | BDBS,DB,AC DB,FLOOR PANELS,MCBS |
| 85 | Supplying and fixing of following mentionedway, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved.as per direction of Engg.-in-Charge. The Distribution boardsshould be Replacement Warranty will be 5 years |
| 86 | Supply and fixing of 12 wayDD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITHCORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) |
| 87 | 6 way MCB EnclosureDB (Doubledoor)(only each EM. CONNECTION UPS LOAD) |
| 88 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model)or equievalant reputed make & model A catagory ISI marked as approved.the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCBshould be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5years. |
| 89 | Supplying and fixing 63Amps/40Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge. TheRCCBshould be Replacement Warranty will be 5 years |
| 90 | EXTERNAL ELECTRICAL |
| 91 | Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos.En 8 grade foundation bolts to withstand basicwind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkal Galvanizers/Utkarsh/Bajaj/JK / Skipper or any equivalentequievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 92 | Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the poleequievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 93 | Supply ,Installation testing commissioning of 45W, High efficient LED with aluminium housing in Pure Polyster UV resistant powder coated black finish and Top maintainable product with top opening die cast cover with acrylic clear glass reflector.CRI>70, IP66, Ambient temp-0 to 45DegC, Driver efficiency>85%, CCT-4000/5700K,THD<10%,Powerfactor>0.95, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 3500 lumens (110 lm/W). Similar to Wipro Make LP07-431-XXX-57-CL or equivalent Philips/ LT/Trilux make. & model A catogory, ISI marked as approved, with proper model make having warrantied for a period of 5 years .The luminaire to be installed in 6 mtr long GI hot dip galvanized smart pole with anti corroson,,uv rays stabilized,metal post with covered by resinof Fumatech/Valmount/Transrail/RR/UTKASH /Utkal Galvanizer make equievalant make with proper model complete with SA bracket internal JB with 4 way connector and MCBas per the pole drawing and direction of EIC against which inspection mat take place.It should be installed after making proper size RCC foundation by considering RCC foundationby using M20 grade RCC & Fe 415 grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts in the foundation. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge. |
| 94 | Supplying, Erection, Fixing, connection & testing of45 LED GATE Light ofWIPRO make or equvalant of Philips/LT/PANASONICor equievalant reputed make A catagoryISI marked as approved maintenance free having 2 years warrantyG.I P ipewith braket including MCB box & including with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 95 | Supplying, Erection, Fixing, connection & testing of 8W, High efficient LED with Aluminium housing with clear toughened glass diffuser.CRI>70, IP65, CCT - 2700K, Ambient temp-0 to 45 DegC, Driver efficiency>85%,THD<25%, Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 600 lumens (75 lm/W). Similar to Wipro Make LF05 or equivalent Philips/ LT/Trilux make. as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 96 | Supplying ,installation & fixing of 11W, High efficient LED with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 565 lumens (51 lm/W). Similar to Wipro Make LB12-131-XXX-65-05 or equivalent Philips/ LT/Trilux make. including with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 97 | Supplying ,installation & fixing of 6W, High efficient LED outdoorwith extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 565 lumens (51 lm/W). Similar to Wipro Make or equivalent Philips/ LT/Trilux make. including installation under water as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 98 | Supplying ,installation & fixing of 7W, High efficient LED outdoor SPOT LIGHT with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 565 lumens (10 lm/W). Similar to Wipro Make or equivalent Philips/ LT/Trilux make. including installation under water as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 99 | Supplying ,installation & fixing of 20W, High efficient LED outdoorSPIKE with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen 70 lm/W). Similar to Havells/WiproMake or equivalent Philips/ LT/Trilux make. including installation under water as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 100 | SITC of IP 65 Non-integral flexible Facade type LED strip light(OUTDOOR),High optically efficient diffuser,, 3000K with 10 w/mtr @ 50Mtrpool with Driver extra as required alongwith foundation if any as per direction of Engg.-in-Charge ( Make :(Make: Havells/Wipro--or similar modelofLT/Trilux /Philips/Panasonic or equievalant orsimilar modelof /PHILIPS/Wipro/HALONIX or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 101 | (Earthing) INSTALLATION |
| 102 | Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 103 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. |
| 104 | Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 105 | Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required LS as per direction of Engg.-in-Charge. |
| 106 | CABLING |
| 107 | Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPEAL. conductor power cable of 1.1 KV gradePOLYCAB/FINOLEX/HAVELLS or equievalant reputed ISI MARKED MAKE of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 108 | 4core x 10 sq mm (OFP TO IND. TIMER PANEL) |
| 109 | 4 core x 4 sq mm (for small power/LIGHT TO POLE) |
| 110 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade size not exceeding 25 SQ. MMdirect in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 111 | Supplying,laying of 3cx4 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 112 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 113 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete withfitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 114 | 50 mm dia |
| 115 | Supply,installation & commissioning and testing Single door type panel board madeout of 16WG CR sheet size 900mm×300mm designed for outdoor mounting subject to protection of rain fall, painted with one coat of red oxide paint wiyh following items. 1. 63A TPN MCCB-1No 2. 63A TPN Contactor-1No 3. Timer switch-2No 4. 32A DP MCB -3Nos 5. Indicating lamps -3Nos (RYB). Internal wiring of panel should be done in 10sqmm cooper wire/cooper flat as per the drection of site in charge ( Make-Legrand/seimens /L & T/Schider ) with Outer protection box |
| 116 | Supplying, installation, testing & commissioning ofoutdoor digital signage display of park in & out with all required asper direction of Engg. In charge. |
| 117 | S/I/T&Commissioning of LT OUT DOOR type mini mast with 9 mtrs octagonal pole along with roundbraket ,4 nos 150w LED flood light ,timer panel with foundation .Make-Bajaj or equievalant.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials. |
| 118 | WATER SUPPLY & SANITATION WORKS |
| 119 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 120 | 40 mm dia |
| 121 | 32 mm dia |
| 122 | 25mm dia |
| 123 | 20mm dia |
| 124 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. |
| 125 | 32mm dia CPVC ball valve |
| 126 | 25mm dia CPVC ball valve |
| 127 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge. |
| 128 | 20mm to 32mm dia pipe |
| 129 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC |
| 130 | In all floor |
| 131 | 20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall |
| 132 | Kitchen Sink (Nirali Elegance Large glossy (600x450x250) mm/Equivalent with drain board |
| 133 | Supplying all materials, labour, taxes, T & Pforfitting & fixingof different water supply CP , Brass or GM concealed fitting andfixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,includingcost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.. |
| 134 | Angular Stop Cock With Wall Flange- Jaquar FLR-CHR- 5053N / Equivalent |
| 135 | Soap Dish Holder- JAQUAR ACN-CHR-1131N/ Equivalent |
| 136 | Soap Dispenser with Glass bottle (JaquarAKP-CHR-35735P/Equivalent) |
| 137 | CP Flanges |
| 138 | CP Grating with floor trap |
| 139 | 15mm dia CP extension piece- Astral T143-010M/ Equivalent |
| 140 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 141 | 110mm dia UPVCpipe |
| 142 | Supply all materials ,labour,T&P,fitting and fixing UPVC SWR Type B pipes & fittings of approved make confirming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleats ,pipe clamps as per requirement including earthwork excavation & fitting ,including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/SUPREME/EQUIVALENT) |
| 143 | 110mm dia UPVC SWR pipe(Type-B) |
| 144 | 110mm U-PVC Door bend |
| 145 | 110mm U-PVC door Tee |
| 146 | 110mm U-PVC plain Bend |
| 147 | 110mm U-PVC door Cross Tee |
| 148 | 110mm U-PVC Offset. |
| 149 | 110mm U-PVC "P" trap |
| 150 | 110mm U-PVC vent cowl with ss jali |
| 151 | 110mm pipe clip |
| 152 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat ofneat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge |
| 153 | Gully trap chamber of size 250mmx250mm with R.C.C cover slab |
| 154 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge |
| 155 | Inspection chamber Inside size 760mmx760mmx460mm |
| 156 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4984/2016 of the following outside dia for Pressure rating PN-6 including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. |
| 157 | 110mm dia u-pvc pipe alround concrete |
| 158 | Supplying all materials, labour, T&P and fixing PVCwater storage tanks of 2000 ltr capacity (shade white) confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including conveyance of all materials to worksite etc all complete as per specification and direction of Engineer-in-charge. |
| 159 | 2000 ltr capacity water storage tanks-1 Nos |
| 160 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Cooler-cum-Purifier of size (700x430x460mm ht) with water cooling capacity of 40 PPH with contineously flow with one faucet having option for cold water and normal water etc.with internal water supply connection complete as per direction of the Engineer-in-charge. |
| 161 | ABSTRACT ESTIMATE FOR CONSTRUCTION OF TOILET |
| 162 | WATER SUPPLY & SANITATION WORKS |
| 163 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 164 | 40 mm dia |
| 165 | 32 mm dia |
| 166 | 25mm dia |
| 167 | 20mm dia |
| 168 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. |
| 169 | 40mm dia CPVC ball valve |
| 170 | 32mm dia CPVC ball valve |
| 171 | 25mm dia CPVC ball valve |
| 172 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge. |
| 173 | 20mm to 32mm dia pipe |
| 174 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC |
| 175 | In all floor |
| 176 | 20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall |
| 177 | Supplying all materials , labour T&P and cutting hole in RCC floors,roofs,etcfor passing PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the EIC |
| 178 | 20mm to 50mm PVC to pass in 125mm to 250mm thk RCC |
| 179 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent. |
| 180 | Water Closet Complete set - HINDWARE -20100+21054/ Equivalent |
| 181 | Orissa pan complete set - HINDWARE -20076/ Equivalent |
| 182 | Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm)Hindware-70002 |
| 183 | Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe includingpainting of fittings and brackets, cutting and making good the walls wherever requiredwith provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent. |
| 184 | Under counter wash basin Complete set (HINDWARE LARACODE NO.10095 Starwhite/ Equivalent), Bottle Trap - ( Jaquar cat no-ALD-769L300x190/Equivalent) , Waste Coupling -(Jaquar cat no-ALD-705/Equivalent) |
| 185 | Wash hand basin with porcelain pedestal(Hindware)-91049+91115 |
| 186 | Supplying all materials, labour, taxes, T & Pforfitting & fixingof different water supply CP , Brass or GM concealed fitting andfixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,includingcost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.. |
| 187 | 2 Way Bib Cock With Wall Flange- ( Jaquar FLR-CHR-5041N/ Equivalent |
| 188 | Pillar Cock with lift type operating knob & Base Flange- (Jaquar FLR-CHR-5015/ Equivalent |
| 189 | Angular Stop Cock With Wall Flange- Jaquar FLR-CHR-5053N / Equivalent |
| 190 | Towel Rail 600mm Long,- ACN-CHR-1111SM/ Equivalent |
| 191 | Towel Ring- ACN-CHR-1121BN/ Equivalent |
| 192 | Soap Dish Holder- JAQUAR ACN-CHR-1131N/ Equivalent |
| 193 | Soap Dispenser with Glass bottle (JaquarAKP-CHR-35735P/Equivalent) |
| 194 | Toilet Roll Holder with stainless steel flap (Jaquar AKP-CHR-35753PS/Equivalent) |
| 195 | Health Faucet(JAQUARALD-CHR-573 /Equivalent) |
| 196 | Glass Shelf ( Jaquar cat no-AKP-35771P/Equivalent) |
| 197 | CP Flanges |
| 198 | CP Grating with floor trap |
| 199 | 15mm dia CP extension piece- Astral T143-010M/ Equivalent |
| 200 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 201 | 110mm dia UPVCpipe |
| 202 | Supply all materials ,labour,T&P,fitting and fixing UPVC SWR Type B pipes & fittings of approved make confirming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleats ,pipe clamps as per requirement including earthwork excavation & fitting ,including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/SUPREME/EQUIVALENT) |
| 203 | 110mm dia UPVC SWR pipe(Type-B) |
| 204 | 110mm U-PVC Door bend |
| 205 | 110mm U-PVC door Tee |
| 206 | 110mm U-PVC plain Bend |
| 207 | 110mm U-PVC door Cross Tee |
| 208 | 110mm U-PVC Offset. |
| 209 | 110mm U-PVC "P" trap |
| 210 | 110mm U-PVC vent cowl |
| 211 | 110mm pipe clip |
| 212 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat ofneat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge |
| 213 | Gully trap chamber of size 250mmx250mm with R.C.C cover slab |
| 214 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge |
| 215 | Inspection chamber Inside size 760mmx760mmx460mm |
| 216 | ABSTRACT ESTIMATE FOR CONSTRUCTION OF FOOT WASH AREA |
| 217 | WATER SUPPLY & SANITATION WORKS |
| 218 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 219 | 32 mm dia |
| 220 | 25mm dia |
| 221 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. |
| 222 | 32mm dia CPVC ball valve |
| 223 | 25mm dia CPVC ball valve |
| 224 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge. |
| 225 | 20mm to 32mm dia pipe |
| 226 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC |
| 227 | In all floor |
| 228 | 20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall |
| 229 | Supplying all materials, labour, taxes, T & Pforfitting & fixingof different water supply CP , Brass or GM concealed fitting andfixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,includingcost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.. |
| 230 | Angular Stop Cock With Wall Flange- Jaquar FLR-CHR- 5053N / Equivalent |
| 231 | CP Flanges |
| 232 | CP Grating with floor trap |
| 233 | 15mm dia CP extension piece- Astral T143-010M/ Equivalent |
| 234 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 235 | 110mm dia UPVCpipe |
| 236 | Supply all materials ,labour,T&P,fitting and fixing UPVC SWR Type B pipes & fittings of approved make confirming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleats ,pipe clamps as per requirement including earthwork excavation & fitting ,including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/SUPREME/EQUIVALENT) |
| 237 | 110mm dia U-PVC duble Plain Tee |
| 238 | 110mm U-PVC Door bend |
| 239 | 110mm U-PVC door Tee |
| 240 | 110mm U-PVC plain Bend |
| 241 | 110mm U-PVC door Cross Tee |
| 242 | 110mm U-PVC Offset. |
| 243 | 110mm U-PVC "P" trap |
| 244 | 110mm U-PVC vent cowl with ss jali |
| 245 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge |
| 246 | Inspection chamber Inside size 760mmx760mmx460mm |
| 247 | Construction 1 nos 100 users RCC Septic tank |
| 248 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge. |
| 249 | - do - with addl. Depth of 1.5 m |
| 250 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge |
| 251 | In ground floor |
| 252 | Supplying all materials, labour, T&P andproviding cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 253 | In ground floor |
| 254 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 255 | In ground floor |
| 256 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 257 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 258 | For Roof slab |
| 259 | For RCC wall |
| 260 | Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 261 | In ground floor |
| 262 | Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 263 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge |
| 264 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 265 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
