Tender For Repair & Maintenance Of Kalindri Bridge Road Over Kalindri River And Tis Adjacent Navigation Lock Approach At Nurpur, Dist. Malda Under Farakka Barrage Project., nurpur-West Bengal

Repair & Maintenance Of Kalindri Bridge Road Over Kalindri River And Tis Adjacent Navigation Lock Approach At Nurpur, Dist. Malda Under Farakka Barrage Project. ; 1 Cutting Of Branches Of Trees Shrubs And Trimming Of Grass And Weeds : Trimming Of Grass And Weeds From The Shoulders / Berms And Disposing Off The Same To Suitable Locations As Per Technical Specifications Clause 1914 For Rural Roads Of Mord. 2 Removal Of Existing Asphaltic Wearing Coat Comprising Of 50 Mm Thick Asphaltic Concrete Laid Over 12 Mm Thick Mastic Asphalt Including Disposal With All Lift And Lead Upto 1000M. 3 Providing And Applying Tack Coat Using Bitumen Emulsion Conformingto Is:8887, Using Emulsion Pressure Distributer Including Preparing The Surface & Cleaning With Mechanical Broom.With Medium Setting Bitumen Emulsion On W.B.M / W.M.M. @ 0.4Kg / Sqm 4 Providing And Laying Bitumen Mastick Wearing Course ( As Per Specifications ) With Indistrial Bitumen Of Grade 85 / 25 Conforming To Is:702, Prepared By Using Mastic Cooker And Laid To Required Leverl And Slope, Incuding Providing Antiskid Surface With Bitumen Precoated Fine Grained Hard Stone Chipping Of Approved Size At The Rate Of 0.005 Cum Per 10Sqm And At Aoproximate Spacing Of 10 Cm Centre To Centre In Both Directrons, Preseed Into Surface Protruding 1 Mm To 4 Mm Over Mastic Surface, Including Cleaning The Surface, Removal Of Debris Etc. All Complete. ( Considering Bitumen Using 10.2% As Per Morth Specification ) 16.37.2 40Mm Thick. 5 Dismantling Old Plaster Or Skriting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 6 12Mm Cement Plaster Of Mix 1:4 ( 1Cement : 4 Coarse Sand ) 7 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 13.46.1 New Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre / 10 Sqm ) 8 Manufacturing, Supplying And Fixing Retro Reflective Sign Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity Encapsulated Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iv Of Astm-D 4956-01 In Blue And Silver White Or Other Colour Combination Including Subject Matter, Message ( Bi-Lingual ) , Symbols And Borders Etc. As Per Irc ; 67:2001, Pasted On Substrate By An Adhesive Backing Which Shall Be Activated By Applying Heat And Pressure Conforming To Class -2 Of Astm-D-4956-01 And Fixing The Same With Suitable Sized Aluminium Alloy Rivets @ 20 Cm C / C To Back Support Frame Of M.S. Angle Iron Of Size 25X25x3 Mm Along With Theft Resistant Measures, Mounted And Fixed With 2 Nos. M.S. Angles Of Size 35X35x5 Mm To A Vertical Post Made Up To M.S. Tee Section Ismt 50X50x6 Mm Welded With Base Plate Of Size 100X100x5 Mm At The Bottom End And Including Making Holes In Pipes, Angles Flats, Providing & Fixing M.S. Message Plate Of Required Size, Steel Work To Be Painted With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade And Of Approved Brand & Manufacture Over Priming Coat Of Zinc Chromate Yellow Primer ( Vertical Ms-Tee Support To Be Painted In Black And White Colours ) .Backside Of Aluminium Sheet To Be Painted With Two Or More Coats Of Epoxy Paint Over And Including Appropriate Priming Coat Including All Leads And Lifts Etc. Complete As Per Drawing , Specification And Direction Of Engineer-In-Charge. 16.59.1 Mandatory / Regulatory Sign Boards Of 900 Mm Diametre With Support Length Of 3750 Mm.

Refer document

INR 17330.0 /-

INR 8.66 Lakhs /-