Military Engineer Services-MES has published Provision Of Bicycle Cum Scooter Stand Car Parking Shed In Bldg No 69, 71, 73, 74, Dry Easy Hanger For 192 Jcos, Ors Qtrs, Aluminium Frame Partition Along With Door At Hq Mao, Fire Resistant False Ceiling In Afi Bldg Server Room Under Age B/R (Central) Un. Submission Date for this Tender is 24-01-2024. Shed Construction Tenders in mumbai Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-01-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor & pavings n.exc 15 cm thickness (below or above GL) and removing debries out side MOD land all as specified and directed. |
| 2 | Excavating in post noles (or similar holes) in soft/loose soil each not exceeding 0.5cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed. |
| 3 | Removing excavated material soft/loose soil not exceeding 50m and depositing where directed at a level not exceeding1.5m above the starting point complete all as specified and directed. |
| 4 | M&L for PCC (1:3:6) type C2(40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | M&L for PCC (1:2:4) type B0 using 12.5mm graded aggregate as coping, in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided, complete all as specified and directed. |
| 6 | M&L 100 mm thick sub base in PCC 1:4:8, type D2, ( using 40 mm graded crushed stone aggregate) all as specified and directed. |
| 7 | M&L brick work with Sub class "B" brick, straight or curved on plan exc 6 metre mean radius built in CM (1:4) all as specified and directed. |
| 8 | M&L for forming 12mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, Grade B all as specified and directed. |
| 9 | M&L rendering 15 mm thick on fair faces of brick wall surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement all as specified and directed. |
| 10 | M&L hardcore of guage exc 63mm but nexc. 100 mm, deposited, spread and levelled in layers nexc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and directed. |
| 11 | M&L 75mm thick PCC 1:3:6 type, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection all as specified and directed. |
| 12 | S&F rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed. |
| 13 | M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement.The feed material is to be manufactured out of 0.50mm (TCT).Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150.The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%) and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides.Covered width will be 1020mm and sheet length as per site requirement.The profile is having return leg for proper side lap.The sheet shall be fixed using self drilling/self capping screws with EDPM sealorfixed with "L" or "J" type or cranked hook bolts in roof all as specified and directed. |
| 14 | M&L for preparation of new untreated steel surface of anydescriptionexc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 15 | S&F mild steel work such as grills, gratings with the ends of bars shoulder and/ or riveted or formed into spikes framed guard bars,barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work, rail & similar fixing with bolts where required conforming to grade E-165 as per IS 15911: 2010 all as specified and as directed. |
| 16 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 17 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 18 | S&F prelaminated particle board, 12mm thick,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed. |
| 19 | S&F fabrication of 3.5 mm thick Exterior aluminium composite panels (ACP) in wooden colour or as decided by Engr in charge, as in door, wall paneling, facia of roof, porch and columns in panels including fixed with Aluminium frame work, Aluminium frame section of size 25 mm x 38 mm and with screws. ACP panels joints sealed with silicon tape, glazing tapeall as specified & directed. |
| 20 | M&L Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed. |
| 21 | M&L Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and directed. |
| 22 | S&F frosted film or logo in any type or design and size all as specified and directed |
| 23 | M&L solid PVC wall lining consisting of 5mm thick Wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and as directed by Engr in Charge. |
| 24 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as directed by Engr in Charge.. |
| 25 | S&F plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exc 6 Sqcm but not exc 13 Sqcm all as specified and directed.sample as approved by GE |
| 26 | S&F elegant Fabric Tile made of perforated cement fiber composite 600X600 / 600X1200 X5mm with square edge density 1050kg/m3 covered with fabric on the front side and Accoustics fiber on the back side, water resistance, and fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and are installed with Aluminum H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120 GSM zinc coating specially designed for Acoustic vibration management and long life alongwith hangers tested as per Fire Retardant IS 15061-2002 for excellent results all as per manufactures instructions all as specified and directed. |
| 27 | S&F aluminium cloth dry hanger made of minimum 16 mm dia Aluminium rod 8 feet length, 6 nos set for heavy duty ceiling cloth dry hanger including fixing on ceiling with metal roof clamps including rope all as specified and directed. |
| 28 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified. |
| 29 | M&L for Point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC casing capping on wall/ceiling and including provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS, 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139 (pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators with brass screws and brass washers and making good the disturbed surfaces as per existingfor one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . |
| 30 | All as per item No.25 here in before but for socket outlet point 5 Amp on same board. |
| 31 | All as peritem No.25 here in before but for socket outletpoint 5 Amp on Independent board. |
| 32 | All as per item No 2 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) all as specified and directed. |
| 33 | S&F modular switch 1 way 6A module 230/250 volt, AC supply,ISI Marked, with white cover plate with frame all as specified and directed. Make:Cona , Plaza, Anchor, Vinay |
| 34 | S&F modular switch 1 way 16A module 230/250 volt, AC supply,ISI Marked, with white cover plate with frame all as specified and directed. Make:Cona , Plaza, Anchor . |
| 35 | S&F modular sockets 6A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover plate all as specified and directed. |
| 36 | S&F modular sockets 6A/16A, 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. |
| 37 | S&F modular sockets 16A/20 Amps, 2/3 pin combined 2 module, 230/250 Volts,50 Hz with one no MCB SP 20 Amps, air conditioner AC supply, ISI Marked, with white cover plate with frame all as specified and directed. |
| 38 | S&F LED batten fittings 1x18 watt complete pre wired fixed to wallwith 2 nos PVC block of suitable size all as specified and directed. |
| 39 | S&F LED down lighter 12 watt light fitting warm white /white type with lamp12 watt with necessary connection all as specified and directed. |
| 40 | S&F recesss mounted low glare luminaire 36Watt2"X2" with all accessories all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
