Military Engineer Services-MES has published Tender For Repair Replacement Of Ac Cgi Sheet Roof Member At Certain Otm Accn Of Charbatia. Submission Date for this Tender is 24-01-2024. Shed Construction Tenders in Cuttack Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-01-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement corrugated or semi corrugated sheet in roof covering complete all as specified and directed. |
| 2 | Dismantling of plain or corrugated steel sheeting any gauge any thickness incl nainital or similar pattern roof covering complete all as specified and directed. |
| 3 | Dismantling of wall and ceiling boards (fibre pulp,insulation etc) or insulation boards/slabs any thickness incl cover fillets complete all as specified and directed. |
| 4 | Material and labour for Providing and fixing suspended false ceiling, which includes providing and fixing GI ultra perimeter channels of size 0.55 mm thick having one flange of 20 mm and another flange of 30 mm and a web of 27 mm alongwith perimeter of ceiling, screw fixed to brickwall/partition with the help of nylon sleeves and screws, at 610 mm centres.then suspending GI ultra intermidieate channels of size 45 mm , 0.9 mm thick with two flanges of 15 mm each from the soffit at 1220 mm centres with ultra ceiling angle of width 25mmx10mmx0.55 mm thick fixed to soffit with GI cleat and steel expansion fasteners.Ultra ceiling section of 0.55 mm thickness having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm are then fixed to the ultra intermidieate channel with the help of connecting clips and in direction perpendicular to the ultra intermidieate channel at 457 mm centres.12.5 mm tapered edge Gypboard (Confirming to IS-2095-1982) is then screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment.Finally the boards are to be jointed and finished so as to have a flush look which includes filling & finishing the tapered and square edges of the boards with jointing conmpound, paper tape and two coats of plastic emulson paint over 3mm thick putty complete all as specified and directed. |
| 5 | S&F 6mm thick AC corugated sheet or semi corrugated sheet fixed with "L type or J type hooks in roof covering complete all as specified and directed. |
| 6 | S&F 6mm thick Asbestos cement two-piece adjustable plain angular ridge complete all as specified and directed. |
| 7 | S&F 0.63 mm CGI sheet with two corrugated inside lap fixed with "L" type hook as in roof complete all as specified and directed. |
| 8 | S&F 0.63 mm Plain, galvanised, mild steel sheeting in ridges, hips valley gutters sun shed etc complete all as specified and directed. |
| 9 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel steet 0.50-0.53 mm thick of an colour having tensile strength of 550 Mpa with hot dip mettalic coating of aluminium alloy (galvalume 150 gms/sqm total of both sides, AZ 150of BMT 0.45mm measuring 0.53mm thick with finish coat as per ASTM A-792 or AS 1392) and wall sheet coated with 25 micron thick painton top and back coating on sheet shall be 10 micron as in roof covering/ cladding to wall, fixed with self tapping screwes as specified and also surface should be dust free. (alloy of 55% aluminium, 43.5% zinc,1.5% silicon) complete all as specified and directed. MAKE: TATA BLUESCOPE STEELColorbond XRW steel OR EQUIVALENT (Life prior to corrosion to perforation by weathering in the natural elements of 20 years from date of manufracturer) |
| 10 | S&F pre-painted galvalume aluminum zinc coating GI based plainsteel steet 0.50-0.53 mm thick of an colour having tensile strength of 550 Mpa with hot dip mettalic coating of aluminium alloy (galvalume 150 gms/sqm total of both sides, AZ 150of BMT 0.45mm measuring 0.53mm thick with finish coat as per ASTM A-792 or AS 1392) and wall sheet coated with 25 micron thick painton top and back coating on sheet shall be 10 micron as in ridge of roof, fixed with self tapping screwes as specified and also surface should be dust free. (alloy of 55% aluminium, 43.5% zinc,1.5% silicon) complete all as specified and directed. MAKE: TATA BLUESCOPE STEELColorbond XRW steel OR EQUIVALENT (Life prior to corrosion to perforation by weathering in the natural elements of 20 years from date of manufracturer) |
| 11 | M&L brick work with sub class "B" bricks (old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of old brick work build in cement mortar complete all as specified and directed |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 13 | S & F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Fe-410-W(Gde-E-250) quality-B complete all as specified and directed. |
| 14 | S & F for wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 15 | M&L for prepraration of new surfaces of steel /iron of any description priming with red oxide primer exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L for Preparation of old painted surfaces of steel/iron of any description (plain or corrugated ) over 10 cm width or girth in roof and wall cladding and applying one coat (finishing coat) of coptic roof paint jenson & Nicholson product) all as specified and directed. |
| 17 | Taking down cement plaster on brick walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 18 | Material and labour for rendering 15 mm thick in two layers (10mm + 5mm) externally on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even & smooth without using extra cement mixed withand excluding water proofing compound @ 2% on top layer of 5mm thick complete all as specified and directed. ( Note : Water proofing compound will measured and paid for separately). |
| 19 | M&L 10 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | Supply only integral water proofing compound complete all as specified and directed. |
| 21 | M&L preparation new plastered surfaces of brick work or previously un treated and applying two coats of oil bound distemper over and including wall care putty complete all as specified and directed. |
| 22 | M&L preparation old plastered surfaces of brick work or previously un treated surface and applying one coats of oil bound distemperall as specified and directed. |
| 23 | S&F 25 mm bore GI pipe tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor including taking down old unserviceable GI pipe 25mm bore complete all as specified and directed. |
| 24 | S&F 20 mm bore GI pipe tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor including taking down old unserviceable GI pipe 20mm bore complete all as specified and directed. |
| 25 | Cutting chases, pinning in making good to facings brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings steps cills chases for concealed water tubing, exc 10 cm but not exc 20 cm girth complete all as specified and directed. |
| 26 | Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 27 | S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 28 | S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 29 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 30 | Material and Labour for rendering 15 mm thick with CM (1:4) on concrete surface including WPC, roof finished even and smooth without using extra cement over neat cement slurry @ 3 Kg /Sqm complete all as specified and directed. (Note : WPC measured and paid separately) |
| 31 | Material and Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry and 1:1 ( by weight) complete all as specified and directed. |
| 32 | Material and labour for providing water proofing treatment with a layer of APP based polymeric membrane, 3mm thick (minimum), weighing 3.50 Kg/Sqm reinforced with polyster non woven fabric (weighing not less than 160 gm/Sqm) shall be applied over one coat of cold bituminous primer @ 0.25 lit/Sqmcomplete all as specified and directed. (Note : The overlaps shall be of minimum 75mm on longitudinal direction and 100mm on transverse direction) |
| 33 | M & L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight,at the junction of roofing to vertical surfaces complete all as specified and directed. |
| 34 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete all as specified and directed. Make Prayag or Equivalent |
| 35 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 25 mm bore,screwed both ends for iron pipe complete all as specified and directed. Make Prayag or Equivalent |
| 36 | S&F 2000 Ltrs capacity rotational moulded polyethyene water storage tanks triple layer(Cylindrical vertical with closed tap) twisted and fixed in position all as specified in SSR Part-I including dismantling of old unserviceable existing tank complete all as specified and directed. (Make : Sintex/ Polycon/ Polywell). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
